If the ceph cli outputs an error with "error calling conf_read_file"
this means that the operator has not written its ceph configuration
file. Thus ceph cli commands will fail, so we can just ignore that since
the operator will soon write this file in its initialization sequence.
Signed-off-by: Sébastien Han <seb@redhat.com>
When creating object store, `radosgw-admin realm get ..` command is stuck forever when required number of OSDs are not available. Because of this the uninstall of object store is also stuck. User has to manually remove the finalizer to delete the object store.This PR uses `ExecuteCommandWithTimeout` for running `radosgw-admin` command. Timeout during installation will be reconciled. Cleanup will be treated as best effort. Any errors during uninstalling of single site object store will only be logged.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
With Ceph Pacific, Rook can now deploy the cephfs-mirror daemon.
This initial commit covers the deployment of a single daemon only.
Multiple mirror daemons is currently untested.
Only a single mirror daemon is recommended.
The configuration of peers will come in a later PR since the mgr module
is still pending upstream: https://github.com/ceph/ceph/pull/39050
The same goes for integration tests, they will get added later once we
start testing on Pacific.
Closes: https://github.com/rook/rook/issues/7002
Signed-off-by: Sébastien Han <seb@redhat.com>
added waitTimeoutForHealthyOSD in the cluster crd that defines the time (in minutes) the operator would wait before an OSD can be stopped for
upgrade. This PR also removes the ok-to-continue logic for osds as its already handled by ok-to-stop. The default value is 10 minutes.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
As of Pacific the balancer is now on by default in upmap mode.
In earlier versions, the balancer was included in the `always_on_modules` list, but needed to be
turned on explicitly using the ``ceph balancer on command.
Signed-off-by: Sébastien Han <seb@redhat.com>
This reverts commit a6ee5657ae.
The operator reconcile of the cephcluster was staying in an endless
loop in clusters that did not have OSDs configured on all nodes.
Now we revert this change for the patch release and will follow
up with a more complete fix in https://github.com/rook/rook/pull/6813.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Test the code-flow when creating crush-rule via explicit
decompile/compile crushmap, when building two-steps crush rule. Relevant
for the case where 'PoolSpec.Replicated.ReplicasPerFailureDomain' is non
zeoro.
This test requires ceph's 'crushtool' to be installed on local machine.
Otherwise, it is ignored.
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
When 'pool.Replicated.ReplicasPerFailureDomain' is non zero, the code
goes via route of adding explicit crush-rule from template, but ignores
the 'pool.DeviceClass' if it is set. Added option to template to have
(optional) 'class hdd|ssd'
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
The arbiter can only be configured with the stretch cluster if the
CRUSH map is balanced and there are two zones in the CRUSH map.
After the OSDs are configured, we wait for all the OSD pods to be
running and that the CRUSH map is balanced. If it takes more than
two minutes, we fail the reconcile and try again. This is only done
the first time the stretch cluster is configured. In future reconciles
we first check if the stretch cluster is already enabled before
enabling it again.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Now, we can schedule snapshots on pools from the CephBlockPool CR when
the pool is mirrored.
It can be enabled like this:
```
mirroring:
enabled: true
mode: pool
snapshotSchedules:
- interval: 24h # daily snapshots
startTime: 14:00:00-05:00
```
Multiple schedules are supported since snapshotSchedules is a list.
Signed-off-by: Sébastien Han <seb@redhat.com>
When new pools are added to an already existing filesystem, we would
create them but not actually associate them to the filesystem. Ensure
that we do this.
Also, while we're here, we refactor the CreateFilesystem test: before,
we were not properly testing creating the filesystem from scratch
because we would return valid JSON for *every* ceph command. Change this
by making the first run return an error so that we get some better
coverage.
After this, we also add a check for the correctness of adding new pools
to the CreateFilesystem unittest.
Fixes#5876
Signed-off-by: Lalit Maganti <lalitm@google.com>
Found by running the following command:
codespell -S .git,*.png,*.jpg -L \
aks,keyserver,atleast,dne,ser,ist,files\',ba,dum,iam,te -f -H
Signed-off-by: Mateusz Gozdek <mgozdekof@gmail.com>
Pools in stretch clusters will all use the same crush rule that
is generated by the operator when configuring the cluster for
stretch mode, with replica 4 and two replicas per failure domain.
Pools cannot create new crush rules, so we require that replica be
4 when the pools is created, EC is not allowed, and no new
crush rule will be created.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
In clusters where only two datacenters (or similar failure domains)
are available, a different mon and osd approach is needed to deal
with the network partitions or some other reason for one of the failure
domains going down. The Ceph stretched cluster makes the mons aware
of the failure domains by configuring one as the arbiter in a third
zone, while keeping two replicas of the data in each of the data
zoens.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When the Ceph cluster runs on PVC and the OSDs are encrypted we can
store LUKS's Key Encryption Key inside a Key Management System. Today,
Rook only supports HashiCorp Vault: https://www.vaultproject.io/
The CephCluster has now a new "security" field which will plug onto the
KMS. Here is an example:
security:
kms:
tokenSecretName: <name of the secret containing a Vault token, used
to authenticate>
connectionDetails: < a map of strings containing connection
information>
Refer to the ceph-cluster-crd documentation to lear more.
Closes: https://github.com/rook/rook/issues/6105
Signed-off-by: Sébastien Han <seb@redhat.com>
The CRUSH map does not allow duplicate values (nor keys) for the
labels. That means that if the currently hardcoded label value
`default` occurs anywhere else in the tree (for example, because
some of the topology labels provided by the cloud provider use it),
the cluster cannot sucessfully spawn.
By giving the user control over the label value used for the root
CRUSH map label, it is possible to adapt the cluster to this
situation.
To be able to actually use the `default` value, the root=default
node which is created by default by ceph itself has to be removed;
since that node is accompanied by a replicated crush rule, we have
to remove that rule, too.
The integration tests are modified to sometimes use the custom
crushRoot (based on an arbitrary criterium) to get coverage across
the various suites. Separate tests could be added, but were not
deemed necessary at this point.
Fixes#4993.
Signed-off-by: Jonas Schäfer <jonas.schaefer@cloudandheat.com>
golangci-lint linter gosec showing more errors
than gosec gh. This commit resolve
new errors. And, removing
nosec comments from autogenerated files.
Signed-off-by: subhamkrai <srai@redhat.com>
The pool spec has now a new property called "replicasPerFailureDomain"
which essentially represents the number of replicas to store in each
failure domain.
Assuming the failure domain is a datacenter (if the cluster is
stretched) then you will have 2 replicas per datacenter where each
replica ends up on a different host. This gives you a total of 4
replicas and for this, the "size" must be set to 4.
Closes: https://github.com/rook/rook/issues/5591
Signed-off-by: Sébastien Han <seb@redhat.com>
this commit handle golangci-lint linter errcheck.
`errcheck` - Errcheck is a program for checking for
unchecked errors in go programs. These unchecked errors
can be critical bugs in some cases
To see only staticcheck linter output
`golangci-lint run --disable-all -E errcheck`
Signed-off-by: subhamkrai <srai@redhat.com>
this commit handle golangci-lint linter staticcheck error.
`staticcheck` - Staticcheck is a go vet on steroids,
applying a ton of static analysis checks.
To see only `staticcheck` linter output
`golangci-lint run --disable-all -E staticcheck`
Signed-off-by: subhamkrai <srai@redhat.com>
this commit will enable one more linter ineffassign
in golangci-lint.
This linter throws an error when variable is assigned and never used.
`golangci-lint run --disable-all -E ineffassign` is used detects ineffassign
errors only.
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
Rook is now capable of configuring mirroring between sites. The
implementation works at different levels:
* CephBlockPool: which introduces a new `mirroring` configuration as well
as `statusCheck`. When turned on, Rook will enable mirroring on the
pool. It will also create a bootstrap peer token and store it in a
Kubernetes Secret. The name of that Secret can be found in the Status
field of the CephBlockPool CRD. This token can be fetched and used by
other clusters to configure the site as a peer. Mirroring can be
configured either at the pool or the image level.
* CephRBDMirror: which introduces a new `peers` configuration allowing
Rook to connect to peers by passing a Secret name. The administrator will
create a Kubernetes Secret with 2 keys: 'token' for the bootstrap peer
token and 'pool' for the name of pool. Once detected the rbd-mirror
controller will go ahead and import the peer configuration.
Pool mirroring status example:
```
status:
info:
rbdMirrorBootstrapPeerSecretName: pool-peer-token-test
mirroringInfo:
lastChanged: "2020-09-17T14:47:27Z"
lastChecked: "2020-09-17T14:48:27Z"
summary:
summary:
mode: image
peers:
- client_name: client.rbd-mirror-peer
direction: rx-tx
mirror_uuid: ""
site_name: rhcs
uuid: c50522a4-28a4-4bd3-ba68-e11780308882
site_name: 91eae0dd-06b1-4d2c-91f3-1311c9df382b-rook-ceph
mirroringStatus:
lastChecked: "2020-09-17T14:48:27Z"
summary:
summary:
daemon_health: OK
health: OK
image_health: OK
states:
replaying: 1
```
Signed-off-by: Sébastien Han <seb@redhat.com>
Some parameter like bluestore_min_alloc_size, bluestore_min_alloc_size_hdd need to be set during the bootstrap of the
ceph cluster in order to have bluestore created accordingly.
To do so rook users rely on the rook-config-override configmap.
Sadly the rook-ceph-osd-prepare job does not take in account this configmap to generate its ceph config.
Changing the behaviour to merge the config from rook-config-override configmap to the default ceph config
Signed-off-by: n.fraison <n.fraison@criteo.com>
File permissions need to be reduced to the minimum to avoid config
files from being accessed. While a connection to the pod would be
required to access the files, min privileges are set just as
another layer of security. This fixes gosec error G306.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The admin needs to start the toolbox and run a command such as ceph osd tree to see the device classes for each OSD. This PR simplifies it by storing the deviceclass info in the CephCluster CR status
closes: https://github.com/rook/rook/issues/5754
Signed-off-by: kesavan <kvellalo@redhat.com>
The ClusterInfo does not use the Log method to write the fields
anymore. The formatting was not necessary since the struct can
be logged if needed with the standard %v golang formatting.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The user creds should not be passed to the ceph helper methods
since the clusterInfo already has the needed context. Removing
a final reference that was missed in the refactor.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
ceph-file-controller gets stuck in loops, this happens when it tires to delete the filesystem which doesn't exist.Filesystem should only be deleted when it exist.
Signed-off-by: RAJAT SINGH <rajasing@redhat.com>
If the healthcheck goroutine cannot check for the ceph status/times out
(if the mons are not in quorum) this should still be reflected in the
CRD status field.
Example:
```
status:
ceph:
details:
error:
message: 'failed to get status. . timed out: exit status 1'
severity: Urgent
health: HEALTH_ERR
lastChanged: "2020-07-20T14:11:05Z"
lastChecked: "2020-07-20T14:11:05Z"
previousHealth: HEALTH_WARN
```
Signed-off-by: Sébastien Han <seb@redhat.com>
To provide more context for executing commands in a ceph cluster,
the full clusterInfo is now passed to the ceph execution commands.
All information about the cluster will now be available throughout
all the areas of the operator. The namespace, ceph credentials,
mon endpoints, and other info is a core part of that cluster info.
Arguments passed through the controllers are also simplified for
mons, mgr, osds, and other daemons where the parameters had
become too complex.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The ceph config and client packages are conceptually the same.
To avoid circular dependencies in some cases, we simplify by combining
the packages into the client package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The operator should only connect to ceph with a single set of creds.
In a converged cluster this will be the admin creds and in an external
cluster it will be lower-privileged creds. Independent clusters were
implemented with a separate set of creds. To simplify the code these
are now merged to a single set.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We can now explicitly set any property on a given pool by using the new
Property field in the CephBlockPool Spec.
Also, this fixes the case where both `CephBlockPool` and `CephCluster`
are created at the same time. When Rook creates the pool, the cluster is
still being bootstrapped and the global option
`osd_pool_default_pg_autoscale_mode` has not bee set yet. So the pool
gets created but its `pg_autoscale_mode` property is set to `warn`
instead of `on`.
Closes: https://github.com/rook/rook/issues/5608V
Signed-off-by: Sébastien Han <seb@redhat.com>
Sébastien Han
Santosh Pillai
Travis Nielsen
Shachar Sharon
Stefan Haas
Arun Kumar Mohan
Lalit Maganti
Mateusz Gozdek
Jonas Schäfer
subhamkrai
subhamkrai
n.fraison
kesavan
RAJAT SINGH