Remove features and design that supports adding OSDs to Ceph clusters
via `spec:driveGroups`. Update the Ceph upgrade doc that informs users
who currently use Drive Groups (we believe there are none of these
users) how to migrate to using the `spec:storage` config.
Resolves https://github.com/rook/rook/issues/7275
Revert "ceph: fix drive group deployment failure"
This reverts commit 76f1d9944e.
Revert "ceph: osd: add drive groups spec to cluster CR"
This reverts commit 7117fc12b7.
Revert "design: ceph orchestrator module add/remove OSDs"
This reverts commit 178187d035.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The osd prepare job detects the failure domain for the OSD by querying
the node topology labels. This topology is then assigned to the OSD
daemon in the CRUSH map. Previously, the affinity was required to be
set in the cluster CR, but it was very difficult to get right. Now the
operator will enforce the correct topology label on the OSD daemon
nodeAffinity by setting the label of the lowest topology in the hierarcy.
For example, if there are region, zone, and rack labels, the rack label
would be used to set the node affinity for the OSD daemon. If an
OSD prepare job is run in rack1, the corresponding OSD daemon will
have node affinity to rack1 to ensure the same topology. Previously,
the OSD could have ended up in rack2 unless the storageClassDeviceSet
placement was very carefully crafted.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The YugabyteDB team has decided to move support of their operator
to a new repo at https://github.com/yugabyte/yugabyte-operator.
The operator in Rook is no longer needed. Further usage of
the YugabyteDB operator is recommended at the new location.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
OSDs on PVCs previously were always replaced with PVCs of a given name.
For on-prem scenarios where the OSDs might need to be removed instead
of replaced, the operator now allows holes to exist in the PVC index
names as long as there are a sufficient number of PVCs to meet the
criteria for the deviceSet.count.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The cockroachDB operator has not had community support in Rook.
Therefore, the time has come to deprecate and remove it.
If the sources are still needed, there is always git history.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The deviceClass property was being ignored when creating the
non-pvc OSDs. Now the deviceClass will be specified as a property
for individual devices, all devices on a node, or all OSDs in the
cluster, depending on the level where the config is applied in the
cluster CR.
Co-authored-by: shenjiatong <yshxxsjt715@gmail.com>
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We can now prioritize orchestrations on certain event. Today only two
events will cancel on-going orchestrations (if any):
* request for cluster deletion
* request for cluster upgrade
If one of the two are caught by the watcher we will cancel the on-going
orchestration.
For that we implemented a simple approach based on check points, where
we will check for a cancellation request in certain part of the
orchestration. Mainly before each mons/mgr/osds orchestration loops.
This solution is not perfect, but we are waiting for the
controller-runtime to release its 0.7 version which will embed context
support. With that we will be able to cancel reconciles more precisely
and rapidly.
Operator log example:
```
2020-11-24 13:54:59.499719 I | op-mon: parsing mon endpoints: a=10.109.126.120:6789
2020-11-24 13:54:59.499719 I | op-mon: parsing mon endpoints: a=10.109.126.120:6789
2020-11-25 12:59:12.986264 I | ceph-cluster-controller: done reconciling ceph cluster in namespace "rook-ceph"
2020-11-25 13:07:33.776947 I | ceph-cluster-controller: CR has changed for "rook-ceph". diff= v1.ClusterSpec{
CephVersion: v1.CephVersionSpec{
Image: "ceph/ceph:v15.2.5",
- AllowUnsupported: true,
+ AllowUnsupported: false,
},
DriveGroups: nil,
Storage: {UseAllNodes: true, Selection: {UseAllDevices: &true}},
... // 20 identical fields
}
2020-11-25 13:07:33.777039 I | ceph-cluster-controller: reconciling ceph cluster in namespace "rook-ceph"
2020-11-25 13:07:33.785088 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:33.788626 I | ceph-cluster-controller: detecting the ceph image version for image ceph/ceph:v15.2.5...
2020-11-25 13:07:35.280789 I | ceph-cluster-controller: detected ceph image version: "15.2.5-0 octopus"
2020-11-25 13:07:35.280806 I | ceph-cluster-controller: validating ceph version from provided image
2020-11-25 13:07:35.285888 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:35.287828 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:35.288082 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:35.621625 I | ceph-cluster-controller: cluster "rook-ceph": version "15.2.5-0 octopus" detected for image "ceph/ceph:v15.2.5"
2020-11-25 13:07:35.642688 I | op-mon: start running mons
2020-11-25 13:07:35.646323 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:35.654070 I | op-mon: saved mon endpoints to config map map[csi-cluster-config-json:[{"clusterID":"rook-ceph","monitors":["10.107.242.49:6789","10.109.71.30:6789","10.98.93.224:6789"]}] data:a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789 mapping:{"node":{"a":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"b":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"c":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"}}} maxMonId:2]
2020-11-25 13:07:35.868253 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:35.868573 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:37.074353 I | op-mon: targeting the mon count 3
2020-11-25 13:07:38.153435 I | op-mon: checking for basic quorum with existing mons
2020-11-25 13:07:38.178029 I | op-mon: mon "a" endpoint is [v2:10.107.242.49:3300,v1:10.107.242.49:6789]
2020-11-25 13:07:38.670191 I | op-mon: mon "b" endpoint is [v2:10.109.71.30:3300,v1:10.109.71.30:6789]
2020-11-25 13:07:39.477820 I | op-mon: mon "c" endpoint is [v2:10.98.93.224:3300,v1:10.98.93.224:6789]
2020-11-25 13:07:39.874094 I | op-mon: saved mon endpoints to config map map[csi-cluster-config-json:[{"clusterID":"rook-ceph","monitors":["10.107.242.49:6789","10.109.71.30:6789","10.98.93.224:6789"]}] data:a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789 mapping:{"node":{"a":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"b":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"c":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"}}} maxMonId:2]
2020-11-25 13:07:40.467999 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:40.469733 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:41.071710 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:41.078903 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:41.125233 I | op-mon: deployment for mon rook-ceph-mon-a already exists. updating if needed
2020-11-25 13:07:41.327778 I | op-k8sutil: updating deployment "rook-ceph-mon-a" after verifying it is safe to stop
2020-11-25 13:07:41.327895 I | op-mon: checking if we can stop the deployment rook-ceph-mon-a
2020-11-25 13:07:44.045644 I | op-k8sutil: finished waiting for updated deployment "rook-ceph-mon-a"
2020-11-25 13:07:44.045706 I | op-mon: checking if we can continue the deployment rook-ceph-mon-a
2020-11-25 13:07:44.045740 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:44.109159 I | op-mon: mons running: [a b c]
2020-11-25 13:07:44.474596 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:44.478565 I | op-mon: deployment for mon rook-ceph-mon-b already exists. updating if needed
2020-11-25 13:07:44.493374 I | op-k8sutil: updating deployment "rook-ceph-mon-b" after verifying it is safe to stop
2020-11-25 13:07:44.493403 I | op-mon: checking if we can stop the deployment rook-ceph-mon-b
2020-11-25 13:07:47.135524 I | op-k8sutil: finished waiting for updated deployment "rook-ceph-mon-b"
2020-11-25 13:07:47.135542 I | op-mon: checking if we can continue the deployment rook-ceph-mon-b
2020-11-25 13:07:47.135551 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:47.148820 I | op-mon: mons running: [a b c]
2020-11-25 13:07:47.445946 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:47.448991 I | op-mon: deployment for mon rook-ceph-mon-c already exists. updating if needed
2020-11-25 13:07:47.462041 I | op-k8sutil: updating deployment "rook-ceph-mon-c" after verifying it is safe to stop
2020-11-25 13:07:47.462060 I | op-mon: checking if we can stop the deployment rook-ceph-mon-c
2020-11-25 13:07:48.853118 I | ceph-cluster-controller: CR has changed for "rook-ceph". diff= v1.ClusterSpec{
CephVersion: v1.CephVersionSpec{
- Image: "ceph/ceph:v15.2.5",
+ Image: "ceph/ceph:v15.2.6",
AllowUnsupported: false,
},
DriveGroups: nil,
Storage: {UseAllNodes: true, Selection: {UseAllDevices: &true}},
... // 20 identical fields
}
2020-11-25 13:07:48.853140 I | ceph-cluster-controller: upgrade requested, cancelling any ongoing orchestration
2020-11-25 13:07:50.119584 I | op-k8sutil: finished waiting for updated deployment "rook-ceph-mon-c"
2020-11-25 13:07:50.119606 I | op-mon: checking if we can continue the deployment rook-ceph-mon-c
2020-11-25 13:07:50.119619 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:50.130860 I | op-mon: mons running: [a b c]
2020-11-25 13:07:50.431341 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:50.431361 I | op-mon: mons created: 3
2020-11-25 13:07:50.734156 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:50.745763 I | op-mon: mons running: [a b c]
2020-11-25 13:07:51.045108 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:51.054497 E | ceph-cluster-controller: failed to reconcile. failed to reconcile cluster "rook-ceph": failed to configure local ceph cluster: failed to create cluster: CANCELLING CURRENT ORCHESTATION
2020-11-25 13:07:52.055208 I | ceph-cluster-controller: reconciling ceph cluster in namespace "rook-ceph"
2020-11-25 13:07:52.070690 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:52.088979 I | ceph-cluster-controller: detecting the ceph image version for image ceph/ceph:v15.2.6...
2020-11-25 13:07:53.904811 I | ceph-cluster-controller: detected ceph image version: "15.2.6-0 octopus"
2020-11-25 13:07:53.904862 I | ceph-cluster-controller: validating ceph version from provided image
```
Closes: https://github.com/rook/rook/issues/6587
Signed-off-by: Sébastien Han <seb@redhat.com>
The discovery daemon is not needed in most scenarios, therefore we disable it
by default. More and more clusters are moving to the cluster-on-pvc scenario
which certainly does not need the local discovery. Even where clusters are not
running on PVCs, the discovery is not needed since the device discovery is again
performed in the osd prepare job.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The CRUSH map does not allow duplicate values (nor keys) for the
labels. That means that if the currently hardcoded label value
`default` occurs anywhere else in the tree (for example, because
some of the topology labels provided by the cloud provider use it),
the cluster cannot sucessfully spawn.
By giving the user control over the label value used for the root
CRUSH map label, it is possible to adapt the cluster to this
situation.
To be able to actually use the `default` value, the root=default
node which is created by default by ceph itself has to be removed;
since that node is accompanied by a replicated crush rule, we have
to remove that rule, too.
The integration tests are modified to sometimes use the custom
crushRoot (based on an arbitrary criterium) to get coverage across
the various suites. Separate tests could be added, but were not
deemed necessary at this point.
Fixes#4993.
Signed-off-by: Jonas Schäfer <jonas.schaefer@cloudandheat.com>
this commit handle golangci-lint linter errcheck.
`errcheck` - Errcheck is a program for checking for
unchecked errors in go programs. These unchecked errors
can be critical bugs in some cases
To see only staticcheck linter output
`golangci-lint run --disable-all -E errcheck`
Signed-off-by: subhamkrai <srai@redhat.com>
this commit will enable one more linter ineffassign
in golangci-lint.
This linter throws an error when variable is assigned and never used.
`golangci-lint run --disable-all -E ineffassign` is used detects ineffassign
errors only.
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
Drive Groups will fail to deploy due to a message: `failed to parse
device list (""): failed to JSON unmarshal configured devices (""):
unexpected end of JSON input`
This is due to trying to JSON unmarshal an empty string which does not
contain any devices to provision when Drive Groups are specified. Fix so
that an empty string represents no non-Drive Group devices.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
If an OSD is down and needs to be removed from the cluster,
a job can be run that will remove the OSD deployment
and purge the OSD from ceph. If the OSD is still up,
the purge will be rejected.
To purge multiple OSDs at the same time, the OSD IDs can be
specified as a comma-separated list.
Signed-off-by: Servesha Dudhgaonkar <sdudhgao@redhat.com>
as the kubernetes 1.13 is EOL and there is no major
functionalities available in 1.13 (resize,snapshot,clone
metrics etc) we are removing the support for kubernetes
for the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
We can now encrypted OSD device that were provisioned via a storage
class using the PV interface.
The encryption works at the storageClassDeviceSets level, which means we
can have encrypted and non-encrypted sets.
Using the new key `encrypted` we can turn it on.
Signed-off-by: Sébastien Han <seb@redhat.com>
using defer for closing file which are open
for writing is not safe. so closing file again
following below steps:
1. open files
2. defer file.close()
3. write
4.file.close()
these will make sure files are closed.
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
this commit suppress the gosec errors for
g204: Audit use of command execution.
g304: File path provided as taint input.
g101: Look for hard coded credentials.
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
To ensure a file handle is closed, we defer the close command
so it is guaranteed to run when the method returns. The closing
of the file handle is not going to fail in our usage since we aren't
using the SetDeadline on the files that would cancel a request
and return an error.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Now, we can not only cleanup monitor data, logs and crashes but the
disks too. As part of the cleanupPolicy CR spec, we have a new setting
called sanitizeDisk which holds more details:
* method: indicates if the entire disk should be sanitized or simply ceph's metadata.
Possible choices are 'complete' or 'quick' (default)
* dataSource: indicate where to get random bytes from to write on the disk.
Possible choices are 'zero' (default) or 'random'
Using random sources will consume entropy from the system and will take much more time then the zero source
* iteration: overwrite N times instead of the default (1). Takes an integer value
See the documentation for more details.
Signed-off-by: Sébastien Han <seb@redhat.com>
Pass desired devices to the OSD provisioning container by
JSON-marshalling/-unmarshalling a disk ID with StorageConfig settings.
This will allow disks to be specified that contain special characters.
Notably, this will support /dev/disk/by-path/pci-HHHH:HH:HH.H devices
that were unsupported previously due to the format which separated
devices from params with colons (:).
Fixes#5056Fixes#5535
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
To provide more context for executing commands in a ceph cluster,
the full clusterInfo is now passed to the ceph execution commands.
All information about the cluster will now be available throughout
all the areas of the operator. The namespace, ceph credentials,
mon endpoints, and other info is a core part of that cluster info.
Arguments passed through the controllers are also simplified for
mons, mgr, osds, and other daemons where the parameters had
become too complex.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The ceph config and client packages are conceptually the same.
To avoid circular dependencies in some cases, we simplify by combining
the packages into the client package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The operator should only connect to ceph with a single set of creds.
In a converged cluster this will be the admin creds and in an external
cluster it will be lower-privileged creds. Independent clusters were
implemented with a separate set of creds. To simplify the code these
are now merged to a single set.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Add the ability to provision Ceph OSDs with Drive Groups.
This adds Drive Groups to the CephCluster CRD, and it sets code
in place for propagating this config to the OSD provisioning pod.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
moves the admission-controller server to use controller-runtime library for better support, maintainibility of code.
Signed-off-by: Vineet Badrinath <vbadrina@redhat.com>
adds deploy.sh script to deploy validatingwebhookconfiguration and create secrets.
adds new command ceph admission-controller to start webhook servers.
adds validation for various rook custom resources
Signed-off-by: Vineet Badrinath <vbadrina@redhat.com>
radosgw-admin as of Octopus uses a different time format, it uses
"2006-01-02T15:04:05.999999999Z". It's close from RFC3339 but not quite
the same. This change is needed in order for the operator image (with a
Ceph Octopus based image) to perform radosgw-admin call correctly.
Signed-off-by: Sébastien Han <seb@redhat.com>
We now have a new env variable ROOK_CEPH_BASE_IMAGE_VERSION which
contains the ceph version on the operator image.
Signed-off-by: Sébastien Han <seb@redhat.com>
Now, we can not only cleanup monitor data, logs and crashes but the
disks too. As part of the cleanupPolicy CR spec, we have a new setting
called sanitizeDisks which holds more details:
* confirmation: the confirmation message to sanitize disks,
use "yes-really-sanitize-disks" to confirm
This will **only** wipe the metadata, so it's a fast cleanup allowing
you to re-install later but won't remove all the data from the drive.
Signed-off-by: Sébastien Han <seb@redhat.com>
This is the final conversion to controller-runtime conversion. This time the
CephCluster CRD has been converted to use the controller-runtime
library.
The controller incorporates all the previous watchers too, so the Node
and hot-plug configmap are been watched too.
Only the operator setting configmap is not being watcher since it's not
related to the CephCluster CRD.
Not only the patch converts to controller-runtime but also tries to
re-organize the tree of the repo to actually make the code more
readable and have better functions/methods/tests separations.
Closes: https://github.com/rook/rook/issues/4939
Signed-off-by: Sébastien Han <seb@redhat.com>
You can now use Rook along with Multus. Multus must be up and running
and the right ressources must exist such as NetworkAttachmentDefinition
CR.
The Cluster CR spec has new fields to work with multus:
network:
provider: multus (or 'host' for hostNetworking)
selectors:
public: NetworkAttachmentDefinition name
cluster: NetworkAttachmentDefinition name
If only a single NetworkAttachmentDefinition is provided Rook will use
both anyway for the Ceph traffic.
Please refer to the doc to learn more.
Closes: https://github.com/rook/rook/issues/4716
Signed-off-by: Sébastien Han <seb@redhat.com>
In case of multiple clusters, we don't want to delete all the mon directories under the dataDirHostPath during cluster cleanup.
This PR deletes the mon directory only if the montior secret key matches.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
In order to ensure proper clean up of all the rook-ceph data when the cluster is deleted, we need to clean up the dataDirHostPath (var/lib/rook)
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
This commit adds all the CSI configurations to ConfigMap.
This configMap can be used in combination with Env Vars
to configure Ceph CSI drivers in rook.
Signed-off-by: Umanga Chapagain <chapagainumanga@gmail.com>
The helpers for executing a process have long required an actionName
param which is not being used. Now we remove the old param
while also cleaning up various other usages of the exec
package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Long ago the ipv4 flags were renamed to public-ip and private-ip
so we can go ahead and remove the obsolete flags.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Checks the version of the configured ceph-csi image while starting the operator. The operator will fail if the image is not supported.
Added an additional parameter to operator to disable the check e.g. to test not yet supported csi images.
Signed-off-by: Stefan Haas <shaas@suse.com>
Blaine Gardner
Travis Nielsen
Sébastien Han
Arun Kumar Mohan
Jared Watts
Jonas Schäfer
Ahmad Nurus S
subhamkrai
subhamkrai
Blaine Gardner
Servesha Dudhgaonkar
Madhu Rajanna
Vineet Badrinath
Santosh Pillai
Umanga Chapagain
moricho
Stefan Haas