Do not reconcile ServiceMonitor/PrometheusRule on label updates.
This allows users to add custom labels which can be used by
custom Prometheus instances for monitoring.
Signed-off-by: Umanga Chapagain <chapagainumanga@gmail.com>
Remove features and design that supports adding OSDs to Ceph clusters
via `spec:driveGroups`. Update the Ceph upgrade doc that informs users
who currently use Drive Groups (we believe there are none of these
users) how to migrate to using the `spec:storage` config.
Resolves https://github.com/rook/rook/issues/7275
Revert "ceph: fix drive group deployment failure"
This reverts commit 76f1d9944e.
Revert "ceph: osd: add drive groups spec to cluster CR"
This reverts commit 7117fc12b7.
Revert "design: ceph orchestrator module add/remove OSDs"
This reverts commit 178187d035.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The osd prepare job detects the failure domain for the OSD by querying
the node topology labels. This topology is then assigned to the OSD
daemon in the CRUSH map. Previously, the affinity was required to be
set in the cluster CR, but it was very difficult to get right. Now the
operator will enforce the correct topology label on the OSD daemon
nodeAffinity by setting the label of the lowest topology in the hierarcy.
For example, if there are region, zone, and rack labels, the rack label
would be used to set the node affinity for the OSD daemon. If an
OSD prepare job is run in rack1, the corresponding OSD daemon will
have node affinity to rack1 to ensure the same topology. Previously,
the OSD could have ended up in rack2 unless the storageClassDeviceSet
placement was very carefully crafted.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
we don't want to merge the node affinity if specified in both
storageClassDeviceSet and placement. Now, we are passing new
boolean argument in `ApplyToPodSpec` which will be false in
case of osd and prepare pods because we don't want to overlap
placement of osd on PVC's and non-PVC's.
Signed-off-by: subhamkrai <srai@redhat.com>
Do not force unit tests to be run while the rook repo is in the GOPATH.
Now that Rook uses go modules, this is no longer necessary. Allow this
by creating a helper function that unit tests can use that return the
on-host path to the `rook` project root.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
when a node fails some pods remains in terminating while other manage to
be rescheduled on another node successfully.
this commit adds code to clean up all the Rook and CSI pods that are stuck in terminating
state on a failed node.
Signed-off-by: rohan47 <rohgupta@redhat.com>
added waitTimeoutForHealthyOSD in the cluster crd that defines the time (in minutes) the operator would wait before an OSD can be stopped for
upgrade. This PR also removes the ok-to-continue logic for osds as its already handled by ok-to-stop. The default value is 10 minutes.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
updating to latest Kubernetes version 1.20.0 fix
security issues. In the current version, it allows
for the token leak in logs when logLevel >= 9.
Signed-off-by: subhamkrai <srai@redhat.com>
Currently, mgr deployment has two overlapping environment variables, ROOK_POD_IP.
This causes kube-apiserver to create error logs
Signed-off-by: binoue <banji-inoue@cybozu.co.jp>
The arbiter can only be configured with the stretch cluster if the
CRUSH map is balanced and there are two zones in the CRUSH map.
After the OSDs are configured, we wait for all the OSD pods to be
running and that the CRUSH map is balanced. If it takes more than
two minutes, we fail the reconcile and try again. This is only done
the first time the stretch cluster is configured. In future reconciles
we first check if the stretch cluster is already enabled before
enabling it again.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This adds the functionality to add custom pod labels to the CSI
components through the operator configuration way of env vars or config
map.
Resolves#6593
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
If users want to restrict the nodes where Ceph daemons should exist,
it's better to make the placement of admission controller configurable
as other daemons.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Found by running the following command:
codespell -S .git,*.png,*.jpg -L \
aks,keyserver,atleast,dne,ser,ist,files\',ba,dum,iam,te -f -H
Signed-off-by: Mateusz Gozdek <mgozdekof@gmail.com>
Instead of directly defining our own constants, we should be using the k8s
constants for the well-known topology labels.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
In clusters where only two datacenters (or similar failure domains)
are available, a different mon and osd approach is needed to deal
with the network partitions or some other reason for one of the failure
domains going down. The Ceph stretched cluster makes the mons aware
of the failure domains by configuring one as the arbiter in a third
zone, while keeping two replicas of the data in each of the data
zoens.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
this commit handle golangci-lint linter errcheck.
`errcheck` - Errcheck is a program for checking for
unchecked errors in go programs. These unchecked errors
can be critical bugs in some cases
To see only staticcheck linter output
`golangci-lint run --disable-all -E errcheck`
Signed-off-by: subhamkrai <srai@redhat.com>
this commit handle golangci-lint linter staticcheck error.
`staticcheck` - Staticcheck is a go vet on steroids,
applying a ton of static analysis checks.
To see only `staticcheck` linter output
`golangci-lint run --disable-all -E staticcheck`
Signed-off-by: subhamkrai <srai@redhat.com>
this commit will enable one more linter ineffassign
in golangci-lint.
This linter throws an error when variable is assigned and never used.
`golangci-lint run --disable-all -E ineffassign` is used detects ineffassign
errors only.
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
If the pod spec changed, we expect an upgrade to proceed for that daemon.
If the check for a changed pod spec fails, we were skipping the update
of that daemon. Instead of skipping the update, we now assume the pod
spec changed if we fail to detect the change so that we can ensure the upgrade
even if we check for upgrades too often.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
In the whereabouts config, the network range is determined by range
option unlike other cni plugins that use Subnet option.
Signed-off-by: rohan47 <rohgupta@redhat.com>
The name generation utils need to provide consistent outputs across
versions so that names generated based on values are consistent and
older generated keys are not lost.
Signed-off-by: Rohan CJ <rohantmp@gmail.com>
this commit handles all the gosec g601
error code (i.e Implicit memory aliasing
of items from a range statement).
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
All assignments made to errors or other variables should be
used instead of ignored. This checks for errors in a couple
places that were previously ignored, and also initializes
a variable such that it won't be always overwritten by the
various if else statements.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
To provide more context for executing commands in a ceph cluster,
the full clusterInfo is now passed to the ceph execution commands.
All information about the cluster will now be available throughout
all the areas of the operator. The namespace, ceph credentials,
mon endpoints, and other info is a core part of that cluster info.
Arguments passed through the controllers are also simplified for
mons, mgr, osds, and other daemons where the parameters had
become too complex.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Add the ability to provision Ceph OSDs with Drive Groups.
This adds Drive Groups to the CephCluster CRD, and it sets code
in place for propagating this config to the OSD provisioning pod.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
remove csi drivers and delete k8s
services that drivers create,when
the default setting of drivers changed
to false.
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
We have introduced a new goroutine to check the state of the rgw
endpoint. It will run every minute and perform operations on a bucket.
The success or failure will be reported as part of the status field of
the CephObjectStore CR.
A good status will look like:
status:
endpointStatus:
lastChanged: "2020-06-25T13:47:45Z"
lastChecked: "2020-06-25T13:48:46Z"
phase: Connected
A failed status:
status:
endpointStatus:
details: |-
error creating bucket "rook-ceph-internal-s3-bucket-checker": RequestError: send request failed
caused by: Put http://rook-ceph-rgw-my-store.rook-ceph:8080/rook-ceph-internal-s3-bucket-checker: dial tcp 10.108.189.148:8080: connect: connection refused
health: ERROR
This check works for both converged and external modes. Note that the
CephObjectStore CRD has a new field called "externalRgwEndpoints" which
allows you to define a list of IP addresses pointing to rgws.
Closes: https://github.com/rook/rook/issues/5692
Signed-off-by: Sébastien Han <seb@redhat.com>
The operator should only print helpful info messages
when an OSD is going to be updated. If the OSD hasn't
changed it is just a debug message.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The pod deletion is needed by other daemons besides the osds,
so we move the helper method into the k8sutil package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
An OSD on a PVC when portable=false is assigned to a node
with a node selector. The same node assignment is expected
for the lifetime of the cluster. On subsequent reconciles,
the operator was looking up the node assignment from the
nodeName on the pod spec, which is not set if the pod is down.
The operator needs to retrieve the assignment from the
deployment spec node selector.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The operator settings can come either from the configmap, an
env var, or a default value. Knowing where the setting is loaded
from is an important detail to see in the log.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
YamlToContainerResource can be used to convert the raw
string data to the array of ContainerResource.
the ContainerResource can be applied to the
pod container resources request and limits.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This is the final conversion to controller-runtime conversion. This time the
CephCluster CRD has been converted to use the controller-runtime
library.
The controller incorporates all the previous watchers too, so the Node
and hot-plug configmap are been watched too.
Only the operator setting configmap is not being watcher since it's not
related to the CephCluster CRD.
Not only the patch converts to controller-runtime but also tries to
re-organize the tree of the repo to actually make the code more
readable and have better functions/methods/tests separations.
Closes: https://github.com/rook/rook/issues/4939
Signed-off-by: Sébastien Han <seb@redhat.com>
You can now use Rook along with Multus. Multus must be up and running
and the right ressources must exist such as NetworkAttachmentDefinition
CR.
The Cluster CR spec has new fields to work with multus:
network:
provider: multus (or 'host' for hostNetworking)
selectors:
public: NetworkAttachmentDefinition name
cluster: NetworkAttachmentDefinition name
If only a single NetworkAttachmentDefinition is provided Rook will use
both anyway for the Ceph traffic.
Please refer to the doc to learn more.
Closes: https://github.com/rook/rook/issues/4716
Signed-off-by: Sébastien Han <seb@redhat.com>
Umanga Chapagain
Blaine Gardner
Travis Nielsen
subhamkrai
Sébastien Han
rohan47
Santosh Pillai
binoue
Arun Kumar Mohan
Alexander Trost
Satoru Takeuchi
Mateusz Gozdek
subhamkrai
Rohan Joseph
Blaine Gardner
Ahmad Nurus S
Madhu Rajanna