this commit add support for updating rgw caps with
`user-info-without-key` and `accounts` to cephobjectstoreuser crd
Adding the check for min ceph version from which these caps
are available.
Co-Authoured-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
Signed-off-by: subhamkrai <srai@redhat.com>
Expand the Node Loss section in block-storage.md to accurately describe the automatic fencing flow, and add dedicated Network Fencing sections across the CSI documentation to provide configuration examples for both manifest-based and Helm-based deployments.
* block-storage.md: introduce the Network Fencing prerequisite paragraph with links to the new example sections, replace the single-line "auto-fencing" description with three bullets describing the client blocklist flow, and update Node Recovery to a single sentence covering workload rescheduling and the 5-minute cool-down behavior that triggers automatic unblocklist. Add a Warning admonition instructing administrators not to remove the out-of-service taint before the node completes a full power cycle.
* csi-configuration.md: add a Network Fencing section enumerating the three prerequisites (CSI-Addons controller, CSI-Addons sidecar, enableFencing flag) and showing the RBD Driver CR manifest with deployCsiAddons and enableFencing set together.
* csi-drivers-chart.md: add a Network Fencing subsection under Custom settings showing the per-driver Helm values for deployCsiAddons and enableFencing, with a cross-reference to csi-configuration.md.
* ceph-csi-drivers.md: replace the legacy CSI_ENABLE_CSIADDONS configmap patch in the Enable CSI-Addons Sidecar section with the modern deployCsiAddons approach on OperatorConfig or Driver, and add a Network Fencing overview section that links out for configuration details and the operational flow.
Signed-off-by: N3rdBot <wujiafeng17@gmail.com>
Updated the required documentation and yamls
where we are adding support for the QoS for
the rbd pvc that uses the krbd mounter.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
After some markdown link fixes,
make docs-build failed due to some non-existing anchors in documentation
sources.
This changes fixes the docs-build by rectifying anchors.
Assisted-by: IBM-Bob
Signed-off-by: Michael Adam <obnox@samba.org>
This change fixes some of the broken links in the markdown
documentatoion sources found by the markdown link checker.
Assisted-by: IBM Bob
Signed-off-by: Michael Adam <obnox@samba.org>
Add optional CephObjectRealm, CephObjectZoneGroup, and CephObjectZone
resources to the rook-ceph-cluster chart so an RGW multisite topology can
be deployed from the chart alongside CephObjectStore.
Each resource type follows the existing per-list template idiom: a new
template ranges over a values list and renders name, namespace, and spec.
The realm template renders spec only when set, supporting both a new realm
(no spec) and a pulled realm (spec.pull.endpoint).
The three lists ship commented out in values.yaml with a multisite
example, matching the opt-in cephECBlockPools precedent, so a default
install creates no multisite resources.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
Fix duplicate words, incorrect articles (a/an), it's/its, and other small
grammar mistakes in Go comments and user-facing messages across pkg/, cmd/,
and tests/.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
Rename the Release Cycle page to "Maintenance and Support" and add a
table of the Kubernetes and Ceph versions supported by each Rook minor
release series (1.12 through 1.20).
The per-series numbers are sourced from each release branch's
prerequisites/quickstart guide (Kubernetes) and Ceph upgrade guide
(Ceph), giving users a single place to check version compatibility
across releases. A redirect preserves the previous release-cycle URL.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
the label could be different based on differnt cluster
setup so no need for label vased verification of csi-op.
Signed-off-by: subhamkrai <srai@redhat.com>
Correct duplicate words, incorrect articles, subject/verb agreement, and
other small grammar mistakes across the user-facing Documentation/ pages
and the design/ records. No content or behavior changes.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
Several godoc comments led with a stale or incorrect identifier, left
over from renames, exported/unexported changes, copy-paste between
sibling declarations, or plain typos. As a result the documented name no
longer matched the function, method, type, or var it describes. Correct
each leading word to the name of the declaration it documents.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
adding api changes to mute/unmute ceph warnings
based on user configuration. The field is map[string]string
key is ceph warning and value is duration how longs
the warnings will be muted.
Signed-off-by: subhamkrai <srai@redhat.com>
Make the NVMe-oF gateway image optional in the CR spec.
When not specified, the operator fetches the image from
the Ceph mon config store using the key
mgr/cephadm/container_image_nvmeof. Falls back to the
hardcoded default if the config is unavailable.
Signed-off-by: Oded Viner <oviner@redhat.com>
updated the external cluster doc, and helm and manifest
install to make use of csi operator as it is the default
offering now
Signed-off-by: parth-gr <partharora1010@gmail.com>
Add support for the osd.rook.io/device-class node label to assign
CRUSH device classes to all OSDs on a node.
The operator reads the label during OSD provisioning and
deployment reconciliation. If CR-level deviceClass conflicts
with the node label, the operator will skip reconciling the
node and logs an error.
Resolves: #17131
Signed-off-by: Yuxiang He <yuxiang@dropbox.com>
The helm values need to be updated if installing the drivers
chart in a namespace other than rook-ceph.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
adding rook compatible Ceph-Csi driver values.yaml
file making sure, upgrading to 1.20 doesn't break
when csi-driver is moved to admin.
Co-authored-by: Travis Nielsen <tnielsen@redhat.com>
Signed-off-by: subhamkrai <srai@redhat.com>
this command adds some examples on how users can add/update
the settings based on new way of managing CSI resources.
Signed-off-by: subhamkrai <srai@redhat.com>
updating rook upgrade to mention the csi changes as breaking
change and updating the steps.
Co-authored-by: Travis Nielsen <tnielsen@redhat.com>
Signed-off-by: subhamkrai <srai@redhat.com>
So far, the latest supported kubernetes version was documented as 1.35
This change documents 1.36 (I. e. the latest available) as
the latest supported version.
It also updates the minimun supported kubernetes version
from 1.30 to 1.31
Signed-off-by: Michael Adam <obnox@samba.org>
Co-authored-by: Travis Nielsen <tnielsen@redhat.com>
adding new tls ssl_ciphersuites supporting tls 1.3 and the existing,
ssl_cipher supports tls 1.2 and below. Adding, the docs and unit-test
changs as well.
Signed-off-by: subhamkrai <srai@redhat.com>
this commit update the csi-operator to latest v1.0.0.
we need to manually patch the csi drivers with the new serviceAccount
name that are being creating based on the latest ceph-csi-operator
release v1.0.0 where serviceAccount are being separate from csi-operator
chart.
co-authored-by: Travis Nielsen <tnielsen@redhat.com>
Signed-off-by: subhamkrai <srai@redhat.com>
kubectl exec requires a double dash ('--') between the pod name and the command to be
executed.
The disaster recovery troubleshooting guide missed those characters
in two places.
This change fixes the guide by adding the missing double dashes
Signed-off-by: Michael Adam <obnox@samba.org>
this commit adds flag stripe_unit for the command
ceph osd erasure-code-profile set [flags]. This key
increase perfomance for ec pool. The default value
is 4kib/4096 bytes.
Signed-off-by: subhamkrai <srai@redhat.com>