A directory is created under dataDirHostPath for each OSD. In host-based cluster,
its name is constructed from kernel device name like _dev_sdb though user specifies
udev persistent device name. We should use unique name among all OSDs.
Closes: https://github.com/rook/rook/issues/7878
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
A user with unbalanced system (e.g., some OSDs use a partition which
resides on a device along-side OS partition) may want to have a
fine-grained control on the overall load of specific OSD. While osd
weight affects write-load, primary-affinity affects read-load.
This patch allow user to define osd's primary-affinity (similar to
'DeviceClass' and 'InitialWeight'), which is sent to the osd (via mon)
as part of deployment sequence, using 'ceph osd primary-affinity' command.
Valid values are within the range [0.0, 1.0). If not set, default value
is 1.
ROOK issue: https://github.com/rook/rook/issues/7773
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
The VolumeSource type was only used internally when loading
the storageClassDeviceSets. The volumeSource element is never
expected to be specified in the CephCluster CR, so it is now
removed from the schema. The VolumeSource type is renamed to
deviceSet for clarity.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The nodeAffinity for portable OSDs is needed to ensure the OSDs are
tied to the same zone or other failure domain where the OSD was
prepared and where it is expected to run. During upgrade the topology
affinity was not being detected since the osd prepare job is skipped
in that case. Now the topology will be detected from the running
OSD daemon pod's node.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
delete updatePVCIfChanged method on "Cluster" from osd package and use
the common one ExpandPVCIfRequired from k8sutil pkg
Signed-off-by: Nitin Goyal <nigoyal@redhat.com>
Ceph support the option '--osd-crush-initial-weight' upon OSD start,
which sets an explicit weight (in TiB units) to specific OSD. Allow
passing this option all the way from the user (similar to
'DeviceClass'), for the special case where end users wants it cluster
to have non-even balance over specific OSDs (e.g., one of the OSDs is
placed over a partition alongside OS-partition).
ROOK issue: https://github.com/rook/rook/issues/7448
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
The metadata name must be unique for a storageClassDeviceSet since
only one each of the sections data, metadata, and wal can be specified.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
OSD directories were removed in v1.2, this is some more cleanup
of dir configuration that is no longer needed.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
With Pacific comes the support for dualstack where ceph daemons can
listen on both ipv4 and ipv6 stacks.
A new field in the network spec has been added: `dualStack`
Signed-off-by: Sébastien Han <seb@redhat.com>
Update OSDs in parallel per the design in
design/ceph/update-osds-in-parallel.md
The max number of OSDs updated in parallel is currently fixed at 20.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
When no VAULT_BACKEND_PATH is specified we default to the API one which
is set to "secret/", we could use a different variable but we don't want
to break the library support. Bonus point this will also fix issue with
users passing a slash at the end of the path.
Signed-off-by: Sébastien Han <seb@redhat.com>
Previously, `interval` was just a string so no special validation was
done by the OpenAPI validator. Now that it is advertised as metav1.Duration
the server will introspect it correctly. Underneath the type is still a
string so no update issue to be worried about.
Signed-off-by: Sébastien Han <seb@redhat.com>
When running encrypted OSDs on multipath the expand container was
failing to find the underlying device of the encrypted block. This was
because the underlying block was located in /dev/mapper and this path
wasn't mounted in the init container "expand-encrypted-bluefs".
This will manifest like so:
```
Underlying device for crypt device ocs-deviceset-block-dev-from-san-1-data-0-5qkmm-block-dmcrypt disappeared.
```
Signed-off-by: Sébastien Han <seb@redhat.com>
Once we are done opening the block device, we should remove the key even
though it is mounted on a tmpfs.
Signed-off-by: Sébastien Han <seb@redhat.com>
In the case of PVC,
We are giving lower priority to all placement.
We want deviceSet placement to applied and
override in case of overlapping settings and
we are merging nodeAffinity if applied in both
all placement and deviceSet.
In case of non-PVC,
we apply spec.placement
Signed-off-by: subhamkrai <srai@redhat.com>
Co-authored-by: Travis Nielsen <tnielsen@redhat.com>
All clusters are configured with bluestore as the store type
therefore we can remove the settings where mentioned in the
docs and dead code.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
It's better to validate ownerReferences when setting them. In addition, we should use
controllerrutil.Set{Controller,Owner}Reference, that have such validation, as possible.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
The mgr daemon may be failed over by ceph if the active mgr is not
responding and the standby mgr is available. If the active mgr changes
the services for the dashboard and metrics will be updated with a
label selector for the new active mgr. The services cannot direct
traffic to the standby mgr or else they will be incorrectly redirected
to the active mgr.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
For simple OSD scenario that don't require the following:
* an encrypted osd
* an osd with a backing device
* multiple osd on the same block device
The OSD will be prepared using the ceph-volume raw mode which does
not use LVM on non-pvc case.
Closes: https://github.com/rook/rook/issues/4768
Signed-off-by: Sébastien Han <seb@redhat.com>
The conditions on the cephcluster CR were being set to false
when not in progress, which is misleading to the purpose of
conditions. The conditions will now always represent current
state of the cluster. Transient conditions that show progress of
a reconcile will be removed from the status.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
If there is a warning coming from the Vault server we must catch it and
exit immediately to reflect it if no key was retrieved.
Signed-off-by: Sébastien Han <seb@redhat.com>
The vault env variable VAULT_BACKEND is read by the secret library so we
must not change it. This is reverting
ee6a03dfb8 with a few extra fixes for the
rgw code.
Signed-off-by: Sébastien Han <seb@redhat.com>
Remove features and design that supports adding OSDs to Ceph clusters
via `spec:driveGroups`. Update the Ceph upgrade doc that informs users
who currently use Drive Groups (we believe there are none of these
users) how to migrate to using the `spec:storage` config.
Resolves https://github.com/rook/rook/issues/7275
Revert "ceph: fix drive group deployment failure"
This reverts commit 76f1d9944e.
Revert "ceph: osd: add drive groups spec to cluster CR"
This reverts commit 7117fc12b7.
Revert "design: ceph orchestrator module add/remove OSDs"
This reverts commit 178187d035.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Change the TestOSDsOnPVC unit test to use t.Log()/t.Logf() to avoid
having a special infof() function that was unnecessary since our unit
tests run with `go test -v` where the `-v` flag interleaves t.Log()
output.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
After adopting `ceph-volume`, secret key for
user osd.x will be generated by `ceph-volume` and
thus method `generateKeyring` is not necessary
anymore.
Executing ceph command takes
extra half of second to complete, executing it
in serial is rather expensive, remove it for better
performance.
Signed-off-by: shenjiatong <yshxxsjt715@gmail.com>
This was a race condition where the test would sometimes finish before a
deferred watcher.Stop() command was called and sometimes would not.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
cURL's ca-cert and Golang TLS config for ca-certs have a different
meaning, it seems that the Golang implementation will always lookup the
local certs first and then proceeds with the specificed cert, if the
system's certs works it will never go to the specificied certificate.
cURL however, does the opposite by strictly checking the specified cert.
If the certificate is signed we don't need to force a specific
certificate, thus by using capath instead we let cURL determine what's
best to validate against.
Signed-off-by: Sébastien Han <seb@redhat.com>
The --silent option will remove the progress bar of the curl but also
silence any errors of stderr, so adding --show-error will display the
error even if --silent is used.
Signed-off-by: Sébastien Han <seb@redhat.com>
removed the code for force delete pods when stuck in terminating state
for mons and osds as there is common code to delete pods for stuck components
Signed-off-by: rohan47 <rohgupta@redhat.com>
The osd prepare job detects the failure domain for the OSD by querying
the node topology labels. This topology is then assigned to the OSD
daemon in the CRUSH map. Previously, the affinity was required to be
set in the cluster CR, but it was very difficult to get right. Now the
operator will enforce the correct topology label on the OSD daemon
nodeAffinity by setting the label of the lowest topology in the hierarcy.
For example, if there are region, zone, and rack labels, the rack label
would be used to set the node affinity for the OSD daemon. If an
OSD prepare job is run in rack1, the corresponding OSD daemon will
have node affinity to rack1 to ensure the same topology. Previously,
the OSD could have ended up in rack2 unless the storageClassDeviceSet
placement was very carefully crafted.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
this commit update `osdProps.placement` instead
of `osdProps.getPreparePlacement()` in the osd.go
this was the copy paste issues coming from other pr.
Signed-off-by: subhamkrai <srai@redhat.com>
we don't want to merge the node affinity if specified in both
storageClassDeviceSet and placement. Now, we are passing new
boolean argument in `ApplyToPodSpec` which will be false in
case of osd and prepare pods because we don't want to overlap
placement of osd on PVC's and non-PVC's.
Signed-off-by: subhamkrai <srai@redhat.com>
Add a new OSD provisioner status (reported by provisioner configmap)
that denotes that an OSD is preexisting and that OSD prepare does not
need to be run for the OSD. This only applies to OSDs on PVC currently
where existence of a deployment for the OSD indicates no further
provisioning needs to occur. New status is "preexisting".
Allow creating new OSDs on PVCs before updating existing ones by
allowing deferring OSDs during processing of OSD provisioning status
ConfigMaps. Deferral is identified by new "preexisting" status.
Add a unit test to ensure OSD on PVC provisioning occurs as expected
including deferring already-created OSDs to be updated after new PVCs
are created.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
If the Vault server returns an error, we must report it in the init
container. With this we can properly debug a failing init container.
Resulting container log:
```
oc logs rook-ceph-osd-0-dc6d4d4d-445dg -c encryption-kms-get-kek ⏎
['error performing token check: Vault is sealed']%
```
Signed-off-by: Sébastien Han <seb@redhat.com>
When the blkdevmapper init container initializes we must override any
existing special block. This will prevent re-using a different disk on
the OSD on PVC scenario.
Adding "--remove-destination" to the cp line will remove each existing
destination file before attempting to open it.
We **MUST** do this otherwise in environment where PVCs are dynamic, restarting the deployment will cause conflicts
When restarting the OSD, the PVC block might end up with a different Kernel disk allocation
For instance, prior to restart the block was mapped to 8:32 and when re-attached it was on 8:16
The previous "block" is still 8:32 so if we don't override it we will try to initialize on a disk that is not an OSD or worse another OSD
This is mainly because in https://github.com/rook/rook/commit/ae8dcf7cc3b51cf8ca7da22f48b7a58887536c4f we switched to use HostPath to store the OSD data
Since HostPath is not ephemeral, the block file must be re-hydrated each time the deployment starts
The test uses "==" instead of numbers since the stat command will print
an hex number and thus we won't always get integer, e,g: major/minor
value 202:13312 will be return ca:3400.
Example run of the new init container:
+ PVC_SOURCE=/set1-data-168h7m
+ PVC_DEST=/var/lib/ceph/osd/ceph-0/block
+ CP_ARGS=(--archive --dereference --verbose)
+ '[' -b /var/lib/ceph/osd/ceph-0/block ']'
++ stat -c %t%T /set1-data-168h7m
+ PVC_SOURCE_MAJ_MIN=ca6100
++ stat -c %t%T /var/lib/ceph/osd/ceph-0/block
PVC's source major/minor numbers changed
removed '/var/lib/ceph/osd/ceph-0/block'
'/set1-data-168h7m' -> '/var/lib/ceph/osd/ceph-0/block'
+ PVC_DEST_MAJ_MIN=ca4000
+ [[ ca6100 == \c\a\4\0\0\0 ]]
+ echo 'PVC'\''s source major/minor numbers changed'
+ CP_ARGS+=(--remove-destination)
+ cp --archive --dereference --verbose --remove-destination /set1-data-168h7m /var/lib/ceph/osd/ceph-0/block
Test procedure:
$ oc -n rook-ceph scale deployment rook-ceph-osd-0 --replicas=2
deployment.apps/rook-ceph-osd-0 scaled
Now we have 2 OSDs and one is crashlooping, which is expected:
rook-ceph-osd-0-66964f6d-2cwqq 0/1 Init:CrashLoopBackOff 4 2m12s
rook-ceph-osd-0-66964f6d-pmhlq 1/1 Running 0 6m7s
The logs from the failing container is pretty clear:
+ PVC_SOURCE=/set1-data-168h7m
+ PVC_DEST=/var/lib/ceph/osd/ceph-0/block
+ CP_ARGS=(--archive --dereference --verbose)
+ '[' -b /var/lib/ceph/osd/ceph-0/block ']'
++ stat -c %t%T /set1-data-168h7m
+ PVC_SOURCE_MAJ_MIN=ca6100
++ stat -c %t%T /var/lib/ceph/osd/ceph-0/block
+ PVC_DEST_MAJ_MIN=ca6100
+ [[ ca6100 == \c\a\6\1\0\0 ]]
+ CP_ARGS+=(--no-clobber)
+ cp --archive --dereference --verbose --no-clobber /set1-data-168h7m /var/lib/ceph/osd/ceph-0/block
inferring bluefs devices from bluestore path
/home/jenkins-build/build/workspace/ceph-build/ARCH/x86_64/AVAILABLE_ARCH/x86_64/AVAILABLE_DIST/centos8/DIST/centos8/MACHINE_SIZE/gigantic/release/15.2.8/rpm/el8/BUILD/ceph-15.2.8/src/os/bluestore/BlueStore.cc: In function 'int BlueStore::expand_devices(std::ostream&)' thread 7f2a52d18240 time 2021-02-09T13:27:46.011397+0000
/home/jenkins-build/build/workspace/ceph-build/ARCH/x86_64/AVAILABLE_ARCH/x86_64/AVAILABLE_DIST/centos8/DIST/centos8/MACHINE_SIZE/gigantic/release/15.2.8/rpm/el8/BUILD/ceph-15.2.8/src/os/bluestore/BlueStore.cc: 7090: FAILED ceph_assert(r == 0)
2021-02-09T13:27:46.010+0000 7f2a52d18240 -1 bluestore(/var/lib/ceph/osd/ceph-0) _lock_fsid failed to lock /var/lib/ceph/osd/ceph-0/fsid (is another ceph-osd still running?)(11) Resource temporarily unavailable
ceph version 15.2.8 (bdf3eebcd22d7d0b3dd4d5501bee5bac354d5b55) octopus (stable)
1: (ceph::__ceph_assert_fail(char const*, char const*, int, char const*)+0x158) [0x7f2a48e236e4]
Acquiring the lock fails, so the OSD won't run.
Now we scale back down:
$ oc -n rook-ceph scale deployment rook-ceph-osd-0 --replicas=1
deployment.apps/rook-ceph-osd-0 scaled
And we can see the last created OSD (the one crash looping) disappears:
rook-ceph-osd-0-66964f6d-2cwqq 0/1 Terminating 5 3m6s
rook-ceph-osd-0-66964f6d-pmhlq 1/1 Running 0 7m1s
Signed-off-by: Sébastien Han <seb@redhat.com>