Clean up the code used to stop health checkers for all controllers
(pool, file, object). Health checkers should now be stopped when
removing the finalizer for a forced deletion when the CephCluster does
not exist. This prevents leaking a running health checker for a resource
that is going to be imminently removed.
Also tidy the health checker stopping code so that it is similar for all
3 controllers. Of note, the object controller now uses namespace and
name for the object health checker, which would create a problem for
users who create a CephObjectStore with the same name in different
namespaces.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
This commit adds context parameter to k8sutil deployment functions. By
this, we can handle cancellation during API call of deployment resource.
Signed-off-by: Yuichiro Ueno <y1r.ueno@gmail.com>
The cluster CR can be forcefully deleted and cleanup the
cluster resources if the yes-really-destroy-data policy
is set on the CR. In this case, the other controllers should
treat the cluster CR as not existing and allow the finalizers
to be removed on those resources if they are requested for
deletion.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit adds context parameter to utilities in opcontroller to
remove context.TODO use in opcontroller. By this, we can handle
cancellation of reconcilers in a fine-grained way.
Signed-off-by: Yuichiro Ueno <y1r.ueno@gmail.com>
This is done in order to prevent deadlock when parallel
PVC create requests are issued on a new uninitialized
rbd block pool due to https://tracker.ceph.com/issues/52537.
Fixes: #8696
Signed-off-by: Rakshith R <rar@redhat.com>
This commit is a large refactor on how the operator starts, stops and
how it starts various sub-components such as the ceph-csi driver. It
also refines the way we cancel orchestrations. We don't use breakpoints
anymore but send our self a SIGUP to reload our controller runtime
manager.
The reload will happen under different circonstances like:
* a new adminission controller secret is created/deleted/changed
* a CephCluster CR is edited
As mentioned earlier, the csi driver now has its own controller, just
like flex. It reacts to change in the operator config map for particular
ROOK_CSI_ fields.
A second new controller for the operator's general config has been
created, it manages:
* the logging level
* the ceph CLI command timeout
* the discovery daemon
The operator reacts much more rapidly to cancellation events by stopping
the manager's context and reloading it.
Signed-off-by: Sébastien Han <seb@redhat.com>
The ceph-block-pool controller was missing the network spec from the
cephcluster that contains all the details about networking.
So when the pool was deleting on multus the controller was not proxying
the rbd command to the mgr pod but executed the command in the operator
pod which does not have the network annotation and then connect to the
ceph cluster.
Signed-off-by: Sébastien Han <seb@redhat.com>
During disaster recovery/migration of a cluster, as part of the failover, the
kubernetes artifacts like deployment, PVC, PV, etc will be restored to a new
cluster by the admin. Even if the kubernetes objects are restored the
corresponding RBD/CephFS subvolume cannot be retrieved during CSI operations as
the clusterID and poolID are not the same in both clusters
This PR creates a mapping between Cluster ID and RBD Pool ID between
local cluster and peer cluster.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
The mon config had two different implementations that have evolved
over the lifetime of the project. This is a simple refactor to remove
the SetConfig() option and stick with the MonStore as a single
implementation for updating the mon store.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
They are scenarios where the mirroring information want to be shared
between clusters prior to creating pool. Because the bootstrap peer
import command needs a pool name to operate this is not suitable. So
additionally now each time the cluster is reconciled and on any new
clusters a new secret will be created that contains a boostrap peer
token. It can be exchanged with another cluster.
Signed-off-by: Sébastien Han <seb@redhat.com>
Instead of having the RBDMirroringPeerSpec in the RBDMirror CRD we want
to move it on the CephBlockPool CRD so that each pool can have its own peer.
This enables pool to re-use an existing peer secret if it points to the
same cluster peer.So we don't need to duplicate secret peer anymore.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
The PR disables mirroring on a pool when PoolSpec.Mirroring.Enabled
is set to false
- disable mirroring on the pool for `Mirroring.Mode == pool`
- Add warning for the user to disable mirroring manually for `Mirroring.Mode == image`
- Stop the mirroring health checker goroutine
- Reset the mirroring health check status in the CR.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Similarly to block volume replication, Ceph is capable of replicating the
content of a Ceph Filesystem from one cluster to another.
For this, during the 1.6 cycle, we introduced a new CRD called
CephFilesystemMirror which effectively deploys a cephfs-mirror daemon.
However, configuring peers to enable replication between two clusters
had to be done manually.
Also various bug fix made it in Ceph eventually and the minimum required
version for this to work is to run on Ceph Pacific 16.2.5 at least.
So the automatic configuration of Ceph Filesystem peers is now possible.
By editing the CephFilesystem CRD, you can now turn on mirroring:
```yaml
mirroring:
enabled: false
# list of Kubernetes Secrets containing the peer token
# for more details see: https://docs.ceph.com/en/latest/dev/cephfs-mirroring/#bootstrap-peers
peers:
secretNames:
- secondary-cluster-peer
```
Also, the mirroring status is displayed in the CR status:
```
status:
info:
fsMirrorBootstrapPeerSecretName: fs-peer-token-myfs
mirroringStatus:
daemonsStatus:
- daemon_id: 4186
filesystems:
- filesystem_id: 2
name: myfs
lastChecked: "2021-07-01T14:16:29Z"
phase: Ready
snapshotScheduleStatus:
lastChecked: "2021-07-01T14:16:29Z"
snapshotSchedules:
- fs: myfs
path: /
rel_path: /
retention: {}
schedule: 24h
```
Closes: https://github.com/rook/rook/issues/7063
Signed-off-by: Sébastien Han <seb@redhat.com>
update blockPoolChannel monitoringRunning field to `true` before
starting the goroutine to monitor mirroring
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
In the latest Ceph releases starting with v16.2.1, all clients are recommended
to be updated so they will have a security fix to connect with a secure
global ID. A health warning will be raised if any insecure clients are connected
and another health warning is raised if insecure clients are still allowed.
Rook will now disable allowing the insecure clients if the health warning
is not being raised to indicate that there are insecure clients still connected.
This means that upgraded clusters will not have this disabled until all the
daemons are updated.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We have been having many issues with external mode with Ceph version
mismatching. The operator would have a Ceph version different than the
external cluster. The `radosgw-admin` was used to interact with S3
users, even a small version delta would cause the command to coredump.
After checking with the rgw core team it appears Rook was misusing the
CLI and the admin ops API should be used instead.
So this patch is the first introduction of go-ceph in Rook to consume
the rgw admin ops API instead of the `radosgw-admin` CLI, **only** for
user management in this initial commit.
Later we can do more such as bucket operation, zone management etc.
Closes: https://github.com/rook/rook/issues/7924
Signed-off-by: Sébastien Han <seb@redhat.com>
Saw this today in the logs:
```
2021-06-02 13:02:54.787838 I | ceph-block-pool-controller: deleting pool "testpool"
2021-06-02 13:02:56.178094 I | cephclient: no images/snapshosts present in pool "testpool"
2021-06-02 13:02:56.178125 I | cephclient: purging pool "testpool" (id=17)
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x0 pc=0x1cef49f]
goroutine 1607 [running]:
github.com/rook/rook/pkg/operator/ceph/pool.(*mirrorChecker).checkMirroringHealth(0xc001a98ba0, 0x8, 0xc000d34c60)
/home/runner/work/rook/rook/pkg/operator/ceph/pool/health.go:115 +0xdf
github.com/rook/rook/pkg/operator/ceph/pool.(*mirrorChecker).checkMirroring(0xc001a98ba0, 0xc0016fd500)
/home/runner/work/rook/rook/pkg/operator/ceph/pool/health.go:82 +0x147
created by github.com/rook/rook/pkg/operator/ceph/pool.(*ReconcileCephBlockPool).reconcile
/home/runner/work/rook/rook/pkg/operator/ceph/pool/controller.go:298 +0xee5
```
Essentially, it's intermittent but when deleting the pool the
healthcheck kicked in and fetched the mirroring status, which returned
empty. THe subsequent code tried to access content of a nil pointer,
hence the error.
So now we stop monitoring first, then we proceed with the deletion.
Signed-off-by: Sébastien Han <seb@redhat.com>
If the monitors addresses change, we must update the peer secret with
the new addresses. For this, each time the configmap
"rook-ceph-mon-endpoints" is updated, we trigger a reconcile on the
CephBlockPool CRs, which will update the token secret.
Signed-off-by: Sébastien Han <seb@redhat.com>
If the ceph cli outputs an error with "error calling conf_read_file"
this means that the operator has not written its ceph configuration
file. Thus ceph cli commands will fail, so we can just ignore that since
the operator will soon write this file in its initialization sequence.
Signed-off-by: Sébastien Han <seb@redhat.com>
We must add the finalizer right after the object creation otherwise the
seerver will later return an error on update that the object has been
modified. Indeed, it has been by the task that updates the status when
the object is first created.
Signed-off-by: Sébastien Han <seb@redhat.com>
Now, we can schedule snapshots on pools from the CephBlockPool CR when
the pool is mirrored.
It can be enabled like this:
```
mirroring:
enabled: true
mode: pool
snapshotSchedules:
- interval: 24h # daily snapshots
startTime: 14:00:00-05:00
```
Multiple schedules are supported since snapshotSchedules is a list.
Signed-off-by: Sébastien Han <seb@redhat.com>
Found by running the following command:
codespell -S .git,*.png,*.jpg -L \
aks,keyserver,atleast,dne,ser,ist,files\',ba,dum,iam,te -f -H
Signed-off-by: Mateusz Gozdek <mgozdekof@gmail.com>
Pools in stretch clusters will all use the same crush rule that
is generated by the operator when configuring the cluster for
stretch mode, with replica 4 and two replicas per failure domain.
Pools cannot create new crush rules, so we require that replica be
4 when the pools is created, EC is not allowed, and no new
crush rule will be created.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The pool subdomains were being validated based on the names of the
crush buckets instead of the crush failure domains, or types.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The CRUSH map does not allow duplicate values (nor keys) for the
labels. That means that if the currently hardcoded label value
`default` occurs anywhere else in the tree (for example, because
some of the topology labels provided by the cloud provider use it),
the cluster cannot sucessfully spawn.
By giving the user control over the label value used for the root
CRUSH map label, it is possible to adapt the cluster to this
situation.
To be able to actually use the `default` value, the root=default
node which is created by default by ceph itself has to be removed;
since that node is accompanied by a replicated crush rule, we have
to remove that rule, too.
The integration tests are modified to sometimes use the custom
crushRoot (based on an arbitrary criterium) to get coverage across
the various suites. Separate tests could be added, but were not
deemed necessary at this point.
Fixes#4993.
Signed-off-by: Jonas Schäfer <jonas.schaefer@cloudandheat.com>
Rook is now capable of configuring mirroring between sites. The
implementation works at different levels:
* CephBlockPool: which introduces a new `mirroring` configuration as well
as `statusCheck`. When turned on, Rook will enable mirroring on the
pool. It will also create a bootstrap peer token and store it in a
Kubernetes Secret. The name of that Secret can be found in the Status
field of the CephBlockPool CRD. This token can be fetched and used by
other clusters to configure the site as a peer. Mirroring can be
configured either at the pool or the image level.
* CephRBDMirror: which introduces a new `peers` configuration allowing
Rook to connect to peers by passing a Secret name. The administrator will
create a Kubernetes Secret with 2 keys: 'token' for the bootstrap peer
token and 'pool' for the name of pool. Once detected the rbd-mirror
controller will go ahead and import the peer configuration.
Pool mirroring status example:
```
status:
info:
rbdMirrorBootstrapPeerSecretName: pool-peer-token-test
mirroringInfo:
lastChanged: "2020-09-17T14:47:27Z"
lastChecked: "2020-09-17T14:48:27Z"
summary:
summary:
mode: image
peers:
- client_name: client.rbd-mirror-peer
direction: rx-tx
mirror_uuid: ""
site_name: rhcs
uuid: c50522a4-28a4-4bd3-ba68-e11780308882
site_name: 91eae0dd-06b1-4d2c-91f3-1311c9df382b-rook-ceph
mirroringStatus:
lastChecked: "2020-09-17T14:48:27Z"
summary:
summary:
daemon_health: OK
health: OK
image_health: OK
states:
replaying: 1
```
Signed-off-by: Sébastien Han <seb@redhat.com>
To provide more context for executing commands in a ceph cluster,
the full clusterInfo is now passed to the ceph execution commands.
All information about the cluster will now be available throughout
all the areas of the operator. The namespace, ceph credentials,
mon endpoints, and other info is a core part of that cluster info.
Arguments passed through the controllers are also simplified for
mons, mgr, osds, and other daemons where the parameters had
become too complex.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We can now explicitly set any property on a given pool by using the new
Property field in the CephBlockPool Spec.
Also, this fixes the case where both `CephBlockPool` and `CephCluster`
are created at the same time. When Rook creates the pool, the cluster is
still being bootstrapped and the global option
`osd_pool_default_pg_autoscale_mode` has not bee set yet. So the pool
gets created but its `pg_autoscale_mode` property is set to `warn`
instead of `on`.
Closes: https://github.com/rook/rook/issues/5608V
Signed-off-by: Sébastien Han <seb@redhat.com>
This is the final conversion to controller-runtime conversion. This time the
CephCluster CRD has been converted to use the controller-runtime
library.
The controller incorporates all the previous watchers too, so the Node
and hot-plug configmap are been watched too.
Only the operator setting configmap is not being watcher since it's not
related to the CephCluster CRD.
Not only the patch converts to controller-runtime but also tries to
re-organize the tree of the repo to actually make the code more
readable and have better functions/methods/tests separations.
Closes: https://github.com/rook/rook/issues/4939
Signed-off-by: Sébastien Han <seb@redhat.com>
When updating the status on resources sometimes the update fails due to
the resource being an outdated version. This frequently occurs when
the same reconcile loop updates the status multiple times, or the finalizer
is added, or some other update to the resource. Upon the next reconcile
the error would generally go away since the status or finalizer didn't
need to be updated multiple times. But now the error is not expected
since the controller will retrieve the latest version of the resource
immediately before attempting to update it.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The pools had some legacy structs that translated between the
ceph.v1 types used by the CRDs and the internal implementation
of the pools. This simplifies the pool implementation by removing
the intermediate model and leaving us only with the ceph v1
pool types and no unnecessary translation.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
They are cases where we let the exponential backoff retry and some where
we force our own retry. Let's properly log this information.
Signed-off-by: Sébastien Han <seb@redhat.com>
The CRD watcher has been replaced by the new controller-runtime
framework.
This brings robustness in our operator, meaning that any resources that
are modified will be reconciled into the desired state.
Closes: https://github.com/rook/rook/issues/4937
Signed-off-by: Sébastien Han <seb@redhat.com>
We have seen cases where the pool is already gone and a deletion
timestamp is set on the CephBlockPool CR.
Signed-off-by: Sébastien Han <seb@redhat.com>
With a finalizer on the pools, the pools were not always being purged
during the integration tests. Now the multicluster suite will ensure
its pool is purged.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Blaine Gardner
Yuichiro Ueno
Travis Nielsen
subhamkrai
Rakshith R
Sébastien Han
Santosh Pillai
Mateusz Gozdek
Jonas Schäfer
subhamkrai
Umanga Chapagain
Madhu Rajanna