The mgr daemon may be failed over by ceph if the active mgr is not
responding and the standby mgr is available. If the active mgr changes
the services for the dashboard and metrics will be updated with a
label selector for the new active mgr. The services cannot direct
traffic to the standby mgr or else they will be incorrectly redirected
to the active mgr.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The active mgr should match the labels on the services that
are available for prometheus and the dashboard. The selector
labels must be updated whenever there is a new active mgr.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The GRPC metrics exposed by both the provisioner pod
and the node plugin pod on some port. Provisioner pod
is running on the pod network and the daemonset pods
run on the host network. sometimes starting the GRPC
metrics by default can lead to node plugin pods
crashloopback state this is due to the port conflict.
Moreover, the GRPC metrics are not for the user it's
for the one which will help to debug the time taken
by cephcsi to serve each GRPC call. Enabling it by
default won't be a good idea. So the plan is to
disable it by default, If someone faces any issue it
can be enabled later at some point in time.
closes#7378
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
We now create 3 disks which will give us 2 OSDs and potentially help us
to catch more errors in our scenarios, especially on iterations.
Signed-off-by: Sébastien Han <seb@redhat.com>
When c-v runs after the end of the prepare sequence, it will look for
lvm and raw-based OSDs. The raw mode detects LVM OSDs so we must trim
the list of OSD, only to report the LVM ones if their ID exists.
Closes: https://github.com/rook/rook/issues/7359
Signed-off-by: Sébastien Han <seb@redhat.com>
The integration tests will now read the manifests from the same source
that is used in the examples for installation. No longer is there a need
for a copy of the CRDs in the integration test code.
The tests will read the manifests directly from disk under a path
relative to the rook root. The upgrade test will read the manifests from
a github url where the base version has been published.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Since the 1.5 releaase we need the integration test to upgrade from
1.5 to master instead of from 1.4 to master.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
this commit removes file `config-admission-controller.sh`
as we don't need this anymore and update the doc to point
`tests/scripts/deploy_admission_controller.sh` to start
admission controller.
Signed-off-by: subhamkrai <srai@redhat.com>
This PR adds an alert that notifies the users if an OSD restarts
for 5 times under 5 minutes. Each restart corresponds to 2 changes
in the value of ceph_osd_up metric.
Signed-off-by: Anmol Sachan <anmol13694@gmail.com>
this commit adds new crd to admission webhooks to check
if one of the port or securePort are set to non-zero
value in objectstore crd.
If both are set to 0 in crd we'll see error like
```
Error from server (invalid create: either of port or securePort
fields should be not be zero): error when creating "object-test.yaml":
admission webhook
"cephobjectstore-wh-rook-ceph-admission-controller-rook-ceph.rook.io"
denied the request: invalid create: either of port or securePort fields
should be not be zero.
```
Signed-off-by: subhamkrai <srai@redhat.com>
we are now using cert-manager for certificates
instead of a self-signed certificate for admission
webhooks.
Signed-off-by: subhamkrai <srai@redhat.com>
For simple OSD scenario that don't require the following:
* an encrypted osd
* an osd with a backing device
* multiple osd on the same block device
The OSD will be prepared using the ceph-volume raw mode which does
not use LVM on non-pvc case.
Closes: https://github.com/rook/rook/issues/4768
Signed-off-by: Sébastien Han <seb@redhat.com>
block if not defined was used with osdInfo.Device so not empty anymore
in the loop, which means it will have the same value for all OSDs in the
loop.
This is only called when running on PVC, where a single device is
present so the loop has a single iteration, so not a big issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
This reverts commit 114a949cfb since
14.2.14 is out and has a fix to use raw mode instead of LVM mode on
partitions.
Signed-off-by: Sébastien Han <seb@redhat.com>
Do not use old Ceph v15.2.7 in integration that was working around the
issue of ceph-volume partition support being removed in v15.2.8.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
(cherry picked from commit 99cee7648cfaf72b02d62e281a2ac3a18bce4132)
Even though CRs for bucket health check was added, CRDs were missing from
crds.yaml file. So the health check always enabled for RGW.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
The osd purge job link requires an absolute url depending
on the branch name since links to the examples do not work
as relative paths.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The CephCluster CR status has a number of fields that are
now finally documented, including the Ceph status, conditions,
and other general status.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The conditions on the cephcluster CR were being set to false
when not in progress, which is misleading to the purpose of
conditions. The conditions will now always represent current
state of the cluster. Transient conditions that show progress of
a reconcile will be removed from the status.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The upcoming Rook release 1.6 will support Ceph Pacific which introduces
stable support for multiple Ceph Filesystems in the same cluster. So we
now allow the creation of multiple Filesystem if the release is Pacific.
Also, we remove the Operator config flag which was not necessary.
Here I have 2 filesystems:
```
[root@rook-ceph-tools-6b4889fdfd-vncck /]# ceph fs ls
name: myfs, metadata pool: myfs-metadata, data pools: [myfs-data0 ]
name: myfs2, metadata pool: myfs2-metadata, data pools: [myfs2-data0 ]
```
```
cluster:
id: cc747950-589a-4862-bad2-ff7de1217b1a
health: HEALTH_WARN
mons a,b,c are low on available space
6 pool(s) have no replicas configured
services:
mon: 3 daemons, quorum a,b,c (age 2d)
mgr: a(active, since 2d)
mds: myfs:1 myfs2:1 {myfs2:0=myfs2-b=up:active,myfs:0=myfs-b=up:active} 2 up:standby-replay
osd: 3 osds: 3 up (since 2m), 3 in (since 6d)
data:
pools: 6 pools, 717 pgs
objects: 44 objects, 4.2 KiB
usage: 46 MiB used, 90 GiB / 90 GiB avail
pgs: 717 active+clean
io:
client: 1.8 KiB/s rd, 4 op/s rd, 0 op/s wr
progress:
Global Recovery Event (45s)
[===========================.]
```
Signed-off-by: Sébastien Han <seb@redhat.com>
If there is a warning coming from the Vault server we must catch it and
exit immediately to reflect it if no key was retrieved.
Signed-off-by: Sébastien Han <seb@redhat.com>
The livenessprobe for swift/health always check with RGW internal port if host network disabled,
but won't work if only secure port is configured
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
The vault env variable VAULT_BACKEND is read by the secret library so we
must not change it. This is reverting
ee6a03dfb8 with a few extra fixes for the
rgw code.
Signed-off-by: Sébastien Han <seb@redhat.com>
Github just switched to use Ubuntu 20.04 for the ubuntu-latest and it is
breaking some of our scenarios so far. Especially scenario creating
partitions.
Closes: https://github.com/rook/rook/issues/7327
Signed-off-by: Sébastien Han <seb@redhat.com>
Ceph_daemon label includes references to a replaced OSD that cause a prometheus
ruleset to fail due many-to-many match error. The changes to this PR filters the
extra matching ceph_daemon time-series.
Signed-off-by: Anmol Sachan <anmol13694@gmail.com>
Travis Nielsen
ushen
Sébastien Han
Madhu Rajanna
subhamkrai
Anmol Sachan
Blaine Gardner
Santosh Pillai
Satoru Takeuchi
Jiffin Tony Thottan
Blaine Gardner