Using the new configuration parameters prometheusEndpoint and
prometheusEndpointSSLVerify users can configure dashboard to
point to their prometheus instance.
closes: #12876
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
add view & edit ClusterRole for obc.
the roles are added to the default user facing roles
view / edit / admin respectively using k8s ClusterRole aggregation.
feature disabled for backward compatibility
and controlled with rbacAggregate.enableOBCs.
Signed-off-by: Cyril Jouve <jv.cyril@gmail.com>
When OSDs flap, ceph stops the OSD daemon if its marked down greater than
5 times in 600 seconds. But OSD pod restarts and marks the OSD `up` again.
This causes the PGs mapped to these OSDs to peer. While the PGs are peering,
IO to these PGs are blocked.
So we need to ensure that if ceph is marking OSD `down` due to flapping, OSD pod
should not restart to mark the OSDs `up` again.
This PR adds a sleep to the OSD pod if the container returned with a 0 exit code
Default behavior is to sleep for 6 hrs. But user can configure it from the
ceph cluster spec.
Signed-off-by: sp98 <sapillai@redhat.com>
While two mgrs is considered sufficient, more mgr daemons are
now allowed in case the admin wants even more fault tolerance
to the active mgr going down, in case multiple mgrs go down.
Up to five mgr pods will be allowed. All mgrs will be in
standby mode except one active mgr. All mgr pods have a sidecar
that will update their respective pod specs with the active
or passive label.
Signed-off-by: travisn <tnielsen@redhat.com>
The prometheus helm chart (kube-prometheus-stack) allows you to restrict
which namespaces prometheus will check for ServiceMonitor objects,
because of this is is typical to be able to configure the namespace of
your ServiceMonitors in helm charts, which is the functionality I have
added here.
Signed-off-by: Mike Hobbs <biz812g@gmail.com>
Change how Rook detects network CIDRs for Multus networks. The IPAM
configuration is only defined as an arbitrary string JSON blob with a
"type" field and nothing more. Rook's detection of CIDRs for whereabouts
had already grown out of date since the initial implementation.
Additionally, Rook did not support DHCP IPAM, which is a reasonable
choice for users. And more, Rook did not support CNI plugin chaining,
which further complicates NADs. Based on the CNI spec, network chaning
can result in any changes to network CIDRs from the first-given plugin.
All these problems make it more and more difficult for Rook to support
Multus by inspecting the NAD itself to predict network CIDRs. Instead,
it is better for Rook to treat the CNI process as a black box. To
preserve legacy functionality of auto-detecting networks and to make
that as robust as possible, change to a canary-style architecture like
that used for Ceph mons, from which Rook will detect the network CIDRs
if possible.
Also allow users to specify overrides for CIDR ranges. This allows Rook
to still support esoteric and unexpected NAD or network configurations
where a CIDR range is not detectable or where the range detected would
be incomplete. Because it may be impossible for Rook to understand the
network CIDRs wholistically while residing only on a portion of the
network, this feature should have been present from Multus's inception.
Improving CIDR auto-detection and allowing users to specify overrides
for auto-detected CIDRs rounds out Rook's Multus support for CephCluster
(core/RADOS) installations. No further architectural changes should be
needed for CephClusters as regards application of public/cluster network
CIDRs for Multus networks.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Correctly set discoveryInterval default value by passing defaultDiscoverInterval to k8sutil.GetValue
Allow to set ROOK_DISCOVER_DEVICES_INTERVAL env var through discoveryDaemonInterval helm value
Signed-off-by: Louis Bailleul <louis.bailleul@pgs.com>
This allows the rook mgr module to check if the discovery daemon is enabled. The udev blacklist setting was also moved just to keep similar settings in the same place.
Signed-off-by: Stephen Muth <smuth4@gmail.com>
The object user was previously required to be created in the
same namespace as the object store and the cluster. Now,
the object user can be reconciled even in a different namespace
from the cluster and object store. The namespace would be specified
in the object user CR.
Signed-off-by: travisn <tnielsen@redhat.com>
Allow setting container security context for operator and toolbox pods
Specify dropping capabilities for the operator and similar settings for the toolbox
Signed-off-by: test <bert@transtrend.com>
Noticed that since the release of 1.9, the values.yaml file has some
old documentation references. Replaced them with the new locations.
Adjusted the link as requested by travisn
Placed extra line eof back as requested by path-gr
Signed-off-by: Rowan Ruseler <rowanruseler@gmail.com>
The CRDs were not generated for the latest since #12384
was merged without rebasing, and other updates with a newer
dependency required the newer descriptions.
Signed-off-by: travisn <tnielsen@redhat.com>
If osd store is updated in the ceph cluster, then
delete OSDs one by one, cleanup disks and provision a new OSD on
the same disk
Signed-off-by: sp98 <sapillai@redhat.com>
As part of a normal restart, an OSD can go down just as prometheus tries
to scrape it, causing this alert to fire. Alerts shouldn't fire as part
of normal operations. This change requires the OSD to be down for 5
consecutive minutes before the alert will fire.
Signed-off-by: Chris Jones <chris@cjones.org>
update vault and other indirect imports. Also,
updating k8s package to `v0.28.0-rc.0` since with
v0.27.4 it was through build error.
Signed-off-by: subhamkrai <srai@redhat.com>
Adding maxUnavailable parameter to the cephfs csi daemonset. The
default value of maxUnavailable = 1 can make the upgrade process
slower in environments with large number of nodes.
Fixes: #12636
Signed-off-by: karthik-us <ksubrahm@redhat.com>
add a value in rook-ceph chart to add additional labels to the
generated ServiceMonitor when monitoring is enabled
Signed-off-by: Cyril Jouve <jv.cyril@gmail.com>
Adding CephCOSIDriver CRD and controller. The controller will bring up
the ceph cosi driver when first object store is created in the rook
operator namespace. Then admin can defined COSI CRDs like BucketClass
and BucketAccessClass for different object stores deployed via Rook.
Using the BucketClass and BucketAccessClass, user can define
BucketAccess for backend bucket in the RGW. The CephCOSIDriver CRD
defines configuration options for ceph cosi driver. In the first version
its usability is minimal. Even if it is not defined Rook will bring up
the ceph cosi driver with default values.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
Some users want to deploy two CephObjectStores for a single Zone. The first
configures RGWs to process the synchronization of the data, while the second
CephObjectStore configures the client RGWs.
Currently, this can be implemented by setting the RGW option
'rgw_run_sync_thread' in the 'rook-config-override' ConfigMap, though it is not
really user friendly.
Ref: https://docs.ceph.com/en/latest/radosgw/config-ref/#confval-rgw_run_sync_thread
This commit adds a new option in the CephObjectStore CRD as defined in issue
https://github.com/rook/rook/issues/12272. The new option
'disableMultisiteSyncTraffic' determine whether the operator should disable the
multisite sync threads for the RGWs.
If the option is set to 'false', or if the option is not specified, the operator
does nothing. This ensures that the multisite sync threads will not be enabled
for users that disabled explicitely the multisite sync threads either manually
or with the 'rook-config-override' ConfigMap.
This commit also recommends to use two objectstore when scaling Ceph Objectstore
Multisite replication, with one objectstore configured with disabled replication
traffic.
Signed-off-by: Lucas Henry <polyedre@disroot.org>
in the existing node watcher, we'll check for node update
event and see if there are `out-of-service` taints are applied
and `ROOK_WATCH_FOR_NODE_FAILURE` is enabled in rook-ceph-operator-configmap,
if then we'll create the networkFence cr and delete the cr if nodes come back.
And, added the unit test too.
Signed-off-by: subhamkrai <srai@redhat.com>
users & buckets admin capabilities aren't spelled the same
way between rook crd (singular) and ceph (plural). It's a bit
misleading when comparing ceph admin cap and rook users.
Signed-off-by: Peter Goron <peter.goron@gmail.com>
Without deletecollection capability the image pullers won't be deleted, causing multus validation to fail.
Added deletecollection verbs to the daemonsets resource in role rook-ceph-system
This is fix for Issue: https://github.com/rook/rook/issues/12435
Signed-off-by: Sudharsan Omprakash <sudharsan.omprakash@yahoo.com>
Documentation and examples used a deprecated annotation to set the Ingress class name. This commit replaces it with the correct version using spec.ingressClassName .
Signed-off-by: Marcel Lautenbach <mlautenb@gmail.com>
Travis Nielsen
Redouane Kachach
Cyril Jouve
sp98
Mike Hobbs
Micah Nagel
Blaine Gardner
Louis Bailleul
Stephen Muth
test
parth-gr
Rowan Ruseler
Chris Jones
subhamkrai
karthik-us
Deepika Upadhyay
Jiffin Tony Thottan
Lucas Henry
Rakshith R
Peter Goron
Sud
Marcel Lautenbach