osd-replacement was relying on exising ceph.rook.io/do-not-reconcile
label for fencing osd destroy process owned by osd health goroutine from
controller. However, this label can be used but other components like
rook krew maintenance plugin and cannot be owned by osd-replacement
process. Added a separate osd.rook.io/replace-in-progress annotation for
that purpose.
Signed-off-by: Artem Torubarov <artem.torubarov@sap.com>
A state machine for osd destroy phase of osd-replacement flow.
The state machine is implemented in OSD health goroutine, where each
step is handled on a separate tick. State machine is responsible
for draining, destroying OSD, and reserving its CRUSH position,
downscalling its deployment, and adding "readyForSwap" annotation.
Destroy phase does not zap the device on purpose. On disk signature
is kept to avoid automatic reprovisioning of destroyed OSD and to
detect physical swap.
Signed-off-by: Artem Torubarov <artem.torubarov@sap.com>
defines a new entry point "close-encrypted-devices" in osd job.
The job is used by osd-replacement flow to close dm-crypt mappings
on host for destroyed encrypted OSDs. The job is owned by OSD
health goroutine implementing destroy phase of osd-replacement.
Signed-off-by: Artem Torubarov <artem.torubarov@sap.com>
startOSDMigration guards against upgrading OSDs while an OSD migration is
still in progress by returning the set of OSDs pending migration, which the
caller then removes from the update queue.
When the last migrated OSD's deployment has not been recreated yet,
isLastOSDMigrationComplete returns (false, nil). startOSDMigration then ran
return nil, errors.Wrapf(err, ...) with err already nil, and
errors.Wrapf(nil, ...) returns nil, so it returned (nil, nil), the same
value it uses to signal that no migration was requested. The caller
therefore skipped removing the pending OSDs from the update queue and could
upgrade and restart them mid-migration, which the pending-migration guard
was meant to prevent.
Return the freshly computed migration config in this case so the caller
still prunes the pending OSDs, without starting a new migration and without
aborting the reconcile. Aborting here would wedge the cluster because the
code that recreates the interrupted OSD runs later in Start, so an early
error return would leave that OSD deleted and block every later reconcile.
Letting the reconcile continue recreates the interrupted OSD and lets the
migration resume on a subsequent reconcile.
Also construct a non-nil error for the sibling unhealthy-PGs guard, which
wrapped a nil err in the same way.
Add a regression test asserting that startOSDMigration returns the pending
migration set, and does not delete another OSD deployment, while a previous
migration is still in progress.
Signed-off-by: Anas Khan <83116240+anxkhn@users.noreply.github.com>
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
The //nolint directives at these sites omit the linter name, so each
suppresses every linter on its line rather than the one check it needs.
That hides any unrelated errcheck/gosec/govet finding later introduced
on the same line. Name the specific linter for each:
- staticcheck for the two operator sites: SA4004 (the intentional
single-iteration loop in the OSD PVC host lookup) and SA1019 (the
deliberate read of the deprecated S3.Enabled field in the RGW
API-enable builder).
- errcheck for the rbd-mirror deferred token-file cleanup and the
test-framework logging helpers (WriteString / writeHeader).
No behavior change.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
Several godoc comments led with a stale or incorrect identifier, left
over from renames, exported/unexported changes, copy-paste between
sibling declarations, or plain typos. As a result the documented name no
longer matched the function, method, type, or var it describes. Correct
each leading word to the name of the declaration it documents.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
When the OSD activate init container cannot match its configured
device, it falls back to a bare 'ceph-volume raw list', which
enumerates every block device on the node and opens each one to read
bluestore labels. Opening a krbd device whose backing cluster is
unhealthy can block in uninterruptible sleep; when that device's I/O
depends on the OSD being activated, activation deadlocks.
Build the fallback scan list explicitly with lsblk and exclude the
network-backed device types that can hang when their backing storage
is unavailable (rbd, nbd, drbd) along with zram (volatile RAM). Rook
never provisions OSDs on any of these, so the fallback can never
legitimately need to find an OSD on them. loop devices are kept,
since OSDs on loop devices are supported for CI and local testing.
Fail fast if the filtered list is empty rather than degenerating back
to a full scan.
Note this hardens only the rename-fallback path. The deadlock observed
in CI (kernel hung tasks under 'ceph-volume raw activate' opening a
stalled /dev/rbd0; actions runs 27325963851, 27333888237, and
27378983111, which reproduced it on this PR's own head) ultimately
originates inside ceph-volume: 'raw activate' runs an unconditional
LUKS2/TPM2 discovery sweep over all block devices even when given an
explicit --device. That requires a ceph-volume fix; this change makes
the Rook-controlled scan safe regardless of ceph version.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
The Clear method on updateQueue had no callers anywhere in the repo
(verified with grep, deadcode, and staticcheck). The queue is emptied via
Remove/Pop in practice. Remove the dead method.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
Add support for the osd.rook.io/device-class node label to assign
CRUSH device classes to all OSDs on a node.
The operator reads the label during OSD provisioning and
deployment reconciliation. If CR-level deviceClass conflicts
with the node label, the operator will skip reconciling the
node and logs an error.
Resolves: #17131
Signed-off-by: Yuxiang He <yuxiang@dropbox.com>
applyUpgradeOSDFunctionality() may run before all OSDs have registered
their new version, leaving require-osd-release unset and the cluster in
HEALTH_WARN.
Check for a single converged OSD version on each health-monitor tick and
set require-osd-release when it changes. The release name is cached to
avoid redundant ceph commands
Signed-off-by: Sunnatillo <sunnat.samadov@est.tech>
when using encryptedDevice:true with host based (non pvc) osds, resizing
the underlying disk and restarting the OSD didn't expand the OSD because
the LUKS encryption layer was not resized.
This PR adds resize capabilities inside the activate container. Full
device stack must be resized: PV → LV → LUKS
Steps:
1. Run pvresize and lvextend to grow the LVM layers.
2. Retrieve the LUKS key from the Ceph config-key store using the
lockbox crednetials already available in the activate container
3. Pass the key explicitly to cryptsetup resize via --key-file.
Signed-off-by: Santosh <sapillai@redhat.com>
User RaceFreeFakeWatcher isntead of FakeWatcher in TestAddRemoveNode
function. The test runs c.Start() in a goroutine whch stops the watcher
when done. If mockNodeOrchestrationCompeltion sends a watch ever after,
that, FakeWatcher panics with "send on a closed channel".
RaceFreeFakeWatcher safely ignores the sends on a stopped channel.
Signed-off-by: Santosh <sapillai@redhat.com>
Fixes#16834 and #17384. Per-OSD CR deviceClass was ignored in
osd prepare job when reporting the osd config back to the operator,
and in the operator's reconcile override.
Fixed by resolving the per-device class from the CR devices list
in GetCephVolumeRawOSDs and in makeDeployment.
Signed-off-by: Artem Torubarov <artem.torubarov@sap.com>
Detect OSD encryption from the dmcrypt block path in `getOSDInfo` as a
fallback when the `encrypted` label is missing on pre-label deployments.
Include `osd.Encrypted` in the label check in `makeDeployment` so the
label reflects the actual OSD state on upgrade.
Fixes a bug where upgrading to a Rook version with the `encrypted` label
would set the label to `false` on already-encrypted OSDs, because the
label didn't exist yet and `getOSDInfo` defaulted to `false`.
Signed-off-by: Santosh <sapillai@redhat.com>
When osd versions are being detected, log more info
about the versions to understand better if the
require-osd-version release is being set as
expected.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When an OSD is purged and reprovisioned, it comes back without the
correct CRUSH device class. NVMe devices configured with
deviceClass: nvme in the CR end up as ssd.
Root cause: the operator sets ROOK_OSD_CRUSH_DEVICE_CLASS on prepare
jobs but not on OSD deployments. During re-discovery
(GetCephVolumeRawOSDs), the daemon reads this env var, finds it
absent, and falls back to auto-detected deviceType which returns ssd
for NVMe.
Fix: add crushDeviceClassEnvVar(osd.DeviceClass) to the OSD
deployment spec in spec.go, alongside the existing
dataDeviceClassEnvVar. Existing deployments pick up the new env var
on operator reconciliation without manual intervention.
Fixes#17227
Signed-off-by: David Orman <ormandj@corenode.com>
The osd unit tests periodically fail with a timing issue
when canceling an orchestration. Attempt to stabilize
the test with a longer timeout before canceling the
test.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We should set OSDInfo.DeviceType if "device-type" label is
set on the corresponding Deployment. Otherwise, Rook
deletes this label on Update.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Update `lockbox.keyring` rotation for encrypted OSDs to ensure the key
is not lost if the init container fails but continues assuming
(reasonably) that the key is likely still relevant.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Previously, if the OSD cephx-keyring-update init container couldn't
contact the mons, the output redirect would overwrite the on-disk
keyring file with no text, removing the on-disk keyring.
Modify the init container to only overwrite the keyring file when the
ceph command to get the latest key suceeds, to avoid removing the
on-disk key.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
This fixes OSD info being incomplete when a sidecar container is first
in the .spec.Template.Spec.Containers list.
I added a small helper function to find a container named "osd" instead
of always assuming the first one.
Signed-off-by: Jan Breitkopf <jan.breitkopf@prorocketeers.com>
For Rook v1.19,removing support for Ceph Reef. It is at end of life.
Users on Reef can continue to use Rook v1.18.x or older.
The latest two Ceph versions Squid and Tentacle are supported.
Signed-off-by: subhamkrai <srai@redhat.com>
When writing to the operator log, where possible
the namespace of the resource on which the operator
is working will be logged as a standard prefix
to more easily troubleshoot what resource is being reconciled
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
In a running cluster, I noticed that a node which was provisioning was removed from k8s
and the following log was emitted by the rook operator:
```
op-osd: cleaning up dangling OSD prepare status configmap "rook-ceph-osd-xxx-status"
```
But the osd provisioning job was still trying to run on the removed node:
```
rook-ceph-osd-prepare-xxx Running 0/1 4d22h 4d22h
```
This PR implements a mechanism to remove any osd provision jobs which are bound to a
node which no longer exists within kubernetes. I added a test for this cleanup as
there wasn't a pre-existing test.
Signed-off-by: Elias Carter <elias@dropbox.com>
currently the device class label was added to the osd pod,
we need the device class label on prepare pod,
so to spread across prpeare pods evenly among the faiure domains
per device class
Signed-off-by: parth-gr <partharora1010@gmail.com>
`cluster.monitoringRoutines` stores three types of
daemon health: "mon", "osd", and "status". These are
used by three goroutines respectively, resulting in:
fatal error: concurrent map reads and map writes.
Signed-off-by: Yite Gu <guyite@bytedance.com>