Ceph upstream telemetry (which Rook users could optionally enable via
Ceph CLI or Dashboard) does not easily identify if a cluster is managed
by Rook. Identifying Rook clusters is possible only if users also enable
the rook mgr module, which is optional and not often used.
To get better upstream insights into Ceph clusters managed by Rook, set
a new 'rook-version' field in Ceph's generic k/v store. This field can
be used to determine if a cluster is managed by Rook by its presence.
It additionally provides information about the Rook version used to
manage the cluster, which is another piece of potentially useful
information.
Regarding Ceph cluster identification via telemetry:
Ceph telemetry is anonymous and uses a different ID from the Ceph
cluster ID. Identifying the Rook version in telemetry does not add
directly identifying information. Therefore, there should be little
risk that adding the Rook version field will decrease anonymity of Ceph
clusters via telemetry.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The startup probe for the OSD has been too aggressive to kill the OSD
in case the OSD is taking some time to start. The OSD may be self-optimizing,
scrubbing, or some other internal operation before it is ready to start.
Rather than disable the startup probe completely, the default is now
to retry for two hours in case the OSD is performing those operations.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We don't need to run any `cp` command since a destination path already
exists. Using `--no-clobber` is not needed and it results in a noop
anyways.
Instead, let's print the reason why we exit the container.
Signed-off-by: Sébastien Han <seb@redhat.com>
we should iterate older clusters spec instead of
new cluster spec since in case of new storageClassdeviceset
added in spec. The total count of the new clusters and older
spec cluster is will not be the same and we'll get panic.
Closes: https://github.com/rook/rook/issues/10222
Signed-off-by: subhamkrai <srai@redhat.com>
When detecting the device property the filesystem was not passed but
used later to validate if the device should be taken or not. Now we read
the filesystem info from "lsblk" and populate it in the device type.
Closes: https://github.com/rook/rook/issues/9470
Signed-off-by: Sébastien Han <seb@redhat.com>
- disk UUID should only be got for "disk" type device.
- It's not necessary to fail prepare job when failing to get disk UUID
- We should consider that `sgdisk` reports UUID even if there is no GPT.
Closes: https://github.com/rook/rook/issues/9948
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Since Quincy is released, Ceph master builds will soon
be tagged with the reef v18 version. This adds the capability
for rook to check for the reef version of Ceph.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Once we are done cleaning up the content of the encrypted osd, let's
close the main LUKS device.
This avoids having dm devices on the system after the cleanup.
Closes: https://github.com/rook/rook/issues/10181
Signed-off-by: Sébastien Han <seb@redhat.com>
Check the radosgw-admin realm user list per object store instead of relying
on the ceph dashboard get-rgw-api- command.
Resolves#9099
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
The CSI package needs to load clusterInfo, today this code is in the mon
package which makes the call of LoadClusterInfo impossible without
having a circular import.
Signed-off-by: Sébastien Han <seb@redhat.com>
Support is removed for k8s for various limitations such as
priority classes not working and csi driver feature
incompleteness and missing snapshots. Documentation is updated
with the new min version of k8s 1.17 and also the tests are
updated to run on the min version of 1.17.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The access/secrets keys for the user struct need to allocate only if
ceph user creation succeeds.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
This removes double package imports. Example:
```
"github.com/rook/rook/pkg/apis/ceph.rook.io/v1"
cephv1 "github.com/rook/rook/pkg/apis/ceph.rook.io/v1"
```
Only one is now being used as shown in go-staticcheck ST1019
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
If a mon is added or removed in a ceph
cluster all the CSI clusterID's belongs
to the ceph cluster should also gets updated.
Added a new cluster identifier to the csi configmap,
i.e ceph clusterNamespace which helps to identify
the clusterID's belongs to that ceph cluster.
Note:- to support the upgraded clusters,we
can ask users to update the mon IP's for the
problamatic clusterID as it wont be updated
by the operator.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The endpoint on the rgw realm pull spec is causing a failure
if not specified even when it is not expected to be
required. Now the endpoint has the json property to be
ommitted if not specified.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
moving setting csi parameter to setParams
function as `setParams` is mostly used to set
the csi parameters for the templates.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
improved the logging and also reorganized code to
handle external and non external cases for better
code readability.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Currently we are allowing users to change the name
of the pool to be created in the BlockPool CR. with
this we have a bug of leaving stale resources in the
cluster. With new changes we are blocking the update
of the pool name in the BlockPool CR.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
After all OSDs are updated to each major release of Ceph, the
require-osd-release version is set to that release so all the latest
functionality for osds can be enabled by Ceph. In Quincy there is
a warning if all osds are on Quincy and this flag is not set, so
this will resolve the health warning.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
setting the GRPC timeout configurable helps
in some cases where ceph cluster takes more time
to respond.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Ceph-CSI supports LUKS encryption for RBD volumes.
This commit adds support for the same by adding capability
of mounting required `rook-ceph-csi-kms-config` configmap
into csi-rbdplugin-provisioner and nodeplugin pods.
Required documentations, helm charts and examples yamls
are also updated.
Resolved: #7032
Signed-off-by: Rakshith R <rar@redhat.com>
As we are not suppose to update the filesystem name
once the subvolumegroup is created.
added webhook validation for subvolumegroup update.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
As we are not suppose to update the pool name
once the rados namespace is created.
added webhook validation for radosnamespace
update.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Create the ".nfs" config pool by default so that users aren't required
to create it via CephBlockPool.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Travis Nielsen
Blaine Gardner
Sébastien Han
subhamkrai
Satoru Takeuchi
FengJiankui
Alexander Trost
Jiffin Tony Thottan
Madhu Rajanna
Rakshith R