In the cluster CR the nodes element will be ignored under storage when
useAllNodes is true. The nodes will only be applied when useAllNodes is
false. It is a common usability problem that users can't figure out
why their nodes are not configured. At least this log entry can give
them a clue.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The osd prepare job is now always working with devices so
we always need to mount /dev and run privileged. There is
no scenario for not mounting /dev since filestore support
was removed.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Changed back the status.State to the exact way it was implemented on the ceph cluster. Added the States as a Constant and used that constant to call the status.State.
Signed-off-by: Nizamudeen <nia@redhat.com>
With a finalizer on the pools, the pools were not always being purged
during the integration tests. Now the multicluster suite will ensure
its pool is purged.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Most of the OLM UI currently uses status.Phase to show the status of the cluster and in some case it uses status.State to show the information.
Having them both for now and slowly deprecating the uses of status.state is the most appropriate way to do now.
Signed-off-by: Nizamudeen <nia@redhat.com>
As a safeguard against the error case described in #4934, this
change sets BlockOwnerDeletion to false on the ownerReference
of all Ceph CSI resources.
Signed-off-by: Elise Gafford <egafford@redhat.com>
Now, the CephBlockPool CRD is managed with the controller-runtime.
So the watcher is outside of the main controller reconciliation loop of
CephCluster which brings numerous benefit such as:
* having its own reconciliation loop
* won't block anything from the main CephCluster controller loop
* fast than waiting for CephCluster loop to completion
Partially close: https://github.com/rook/rook/issues/1981
Signed-off-by: Sébastien Han <seb@redhat.com>
Checks the version of the configured ceph-csi image while starting the operator. The operator will fail if the image is not supported.
Added an additional parameter to operator to disable the check e.g. to test not yet supported csi images.
Signed-off-by: Stefan Haas <shaas@suse.com>
Prior attempts to delete CSI drivers using owner references to the
Ceph ConfigMap resulted in garbage collection of the driver
resources as described in rook#4590. This patch manually deletes these
resources by name as a stopgap to provide an appropriate user
experience while the team investigates this issue further.
Resolves: rook#4824
Signed-off-by: Elise Gafford <egafford@redhat.com>
This commit will add a phase and also a condition to display a Failed status on the external rook-ceph cluster if its failed to establish a connection.
Signed-off-by: Nizamudeen <nia@redhat.com>
The rook types used across the storage providers moved from the v1alpha2
package to the v1 package. This commit points the packages at their new
location. Implementation is expected to remain unchanged.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The types that are used in CRDs across the storage providers do not need
to be in the v1alpha2 package. These should be declared stable in the v1
package. The only types remaining in the v1alpha2 package are the flex
volume types, which will never graduate since their replacement is the
csi driver.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
As of Octopus, Ceph will prevent you from creating a pool with a
replica size of 1. Allowing such pool could lead to data loss, so enable
the new option: requireSafeReplicaSize: false if you are **ABSOLUTELY**
certain that is what you want.
Closes: https://github.com/rook/rook/issues/4889
Signed-off-by: Sébastien Han <seb@redhat.com>
Do not use the Rook binary to generate minimal config for Ceph's
NFS-Ganesha pods. Instead, `cat` the minimal file in an init container
using the Ceph container.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
This commit is to handle all those unhandled errors which raises the gosec warning.
Fixed G104: Unhandled Errors are handled now
Signed-off-by: Nizamudeen <nia@redhat.com>
The Ceph daemons no longer use the ceph.conf for settings generated
by the operator. The operator only generates the ceph.conf in order
to connect to the mons and configure the cluster. Now we reduce
to the minimal required settings.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The ceph/ceph:v14.2.7 image is released so we can pick these fixes
up as the recommended version of ceph.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When the OSD on PVC is backed by a metadata block PVC, the Ceph CRUSH
device class should be set to something else rather than the rotational
property of the drive.
Closes: https://github.com/rook/rook/issues/4881
Signed-off-by: Sébastien Han <seb@redhat.com>
Creating an EC pool was succeeding, but then the update to the
status was failing because of an incorrect check for changing EC
parameters. Now we correctly check if EC parameters are changing
unexpectedly.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The job to wipe devices fails the integration tests periodically.
Now the job will be retried once if it fails to retry wiping the
disks.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When the cluster is upgraded, the child controllers are notified with the
callback to the ParentClusterChanged() method. These should be made
in a separate goroutine so that the cluster controller is not blocked
on the child controllers and also so child controllers aren't blocked
on each other for the upgrade.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When ROOK_CURRENT_NAMESPACE_ONLY is true, watches should be limited to
the configured namespace
Signed-off-by: Andrew DeMaria <lostonamountain@gmail.com>
This commit is also part of gosec error handling which handles the following issue:
Fixed G304: Potential File inclusion by cleaning up the file path
Signed-off-by: Nizamudeen <nia@redhat.com>
This commit fixes the gosec warning
G101: Potential hardcoded credential variable by adding a #nosec tag and relavant comment
Signed-off-by: Nizamudeen <nia@redhat.com>
"rook-ceph-operator-config" can be used to override Env Var
initialized during operator deployment.
This commit makes use of the ConfigMap to determine NodeAffinity
and Tolerations for ceph-csi drivers.
Closes#3239
Signed-off-by: Umanga Chapagain <chapagainumanga@gmail.com>
When running on PVC, if the backend resizes the block, Rook will expand
it and the size of the OSD will grow.
Signed-off-by: Sébastien Han <seb@redhat.com>
When running old client version, we must force the compatibility
features so that the orchestration does not fail in a loop.
Closes: https://github.com/rook/rook/issues/4842
Signed-off-by: Sébastien Han <seb@redhat.com>
We now support the addition of the PVC that acts as a metadata device
for a given OSD.
For this, you need to create a new `volumeClaimTemplates`, its name must
be "metadata" otherwise, Rook won't pick it up.
A template will look like this:
```
volumeClaimTemplates:
- metadata:
name: data
spec:
resources:
requests:
storage: 10Gi
# IMPORTANT: Change the storage class depending on your environment (e.g. local-storage, gp2)
storageClassName: gp2
volumeMode: Block
accessModes:
- ReadWriteOnce
- metadata:
name: metadata
spec:
resources:
requests:
storage: 6Gi
# IMPORTANT: Change the storage class depending on your environment (e.g. local-storage, gp2)
storageClassName: gp2
volumeMode: Block
accessModes:
- ReadWriteOnce
```
We now map block and block.db directly inside the container instead of
running ceph-volume activate. This is much cleaner.
Closes: https://github.com/rook/rook/issues/3852
Signed-off-by: Sébastien Han <seb@redhat.com>
Travis Nielsen
Sébastien Han
Nizamudeen
Elise Gafford
Stefan Haas
Blaine Gardner
crombus
Andrew DeMaria
Umanga Chapagain