Now, the CephBlockPool CRD is managed with the controller-runtime.
So the watcher is outside of the main controller reconciliation loop of
CephCluster which brings numerous benefit such as:
* having its own reconciliation loop
* won't block anything from the main CephCluster controller loop
* fast than waiting for CephCluster loop to completion
Partially close: https://github.com/rook/rook/issues/1981
Signed-off-by: Sébastien Han <seb@redhat.com>
The rook types used across the storage providers moved from the v1alpha2
package to the v1 package. This commit points the packages at their new
location. Implementation is expected to remain unchanged.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit is to handle all those unhandled errors which raises the gosec warning.
Fixed G104: Unhandled Errors are handled now
Signed-off-by: Nizamudeen <nia@redhat.com>
This commit fixes the gosec warning
G101: Potential hardcoded credential variable by adding a #nosec tag and relavant comment
Signed-off-by: Nizamudeen <nia@redhat.com>
We now always perform ok-to-stop change when the deployment is going to
be updated. This could be for various reasons like change in the spec or
a new Ceph image.
In any case, if Ceph resources are going to be restarted this must be
done carefully.
Also trimmed the isUpgrade variable, the upcoming commit will remove the
need of that variable.
Keeping isUpgrade from the controller code since we need it to detect
whether an orchestration upgrade should be triggered or not (based on
the ceph cluster status).
Also, we keep it on the child controllers so we don't go into an
orchestration phase if the cluster image hasn't changed. The child does
not need to be updated/go into its orchestration phase because the
cluster CR changed.
Closes: https://github.com/rook/rook/issues/4379
Signed-off-by: Sébastien Han <seb@redhat.com>
A new CRD option `continueUpgradeAfterChecksEvenIfNotHealthy` is added.
When upgrading, Rook goes OSD by OSD and then waits for PGs to be clean
before proceeding to the next OSD. Currently, Rook waits for 5 hours but
there might be circumstances where PGs need more time to settle.
Thus setting `continueUpgradeAfterChecksEvenIfNotHealthy` to true will
pursue the upgrade process, even if PGs are not 100% active+clean.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786029
Signed-off-by: Sébastien Han <seb@redhat.com>
Replaced `math/rand` with more secure `crypto/rand` which will generate CSPRNG.
Changed the length of dashboard password from 10 to 20 and included more special characters that can strengthen password.
Passwords before this change: QoMmqLkaOf,8tqTyWF1sZ
Passwords after this change: L{QZ@_c'Rl7$uvW:UHU1, fP-OjX`UVw0J0Ka/scS(
Resolves: https://github.com/rook/rook/issues/4571
Signed-off-by: Nizamudeen <nia@redhat.com>
Reduce from 5 minutes to less than 50 seconds the time needed to restart a
mgr and osds(PVCs based),rgw,mds,rbd,nfs and toolbox pod that was running
in a k8s "NotReady" Node.
A new Rook Operator setting has been added to allow the user to set the
time used in pod's toleration <node.kubernetes.io/unreachable>:
ROOK_UNREACHABLE_NODE_TOLERATION_SECONDS = <5>
New setting added in release notes
Addressed @travisn,@leseb, and @blaineEXE suggestions
Signed-off-by: Juan Miguel Olmo Martínez <jolmomar@redhat.com>
When using the "errors" package, using `%+v` (extended format),
each Frame of the error's StackTrace will be printed in detail.
Let's only print `%v` to print the error.
If the error has a Cause it will be printed recursively.
Basically `%+v` has been replaced with `%v` for all `error` type
interfaces, whether the logger is Info, Warning or Error.
Signed-off-by: Sébastien Han <seb@redhat.com>
During an orchestration if there were failures to update any OSD deployment,
the orchestration would fail and continue trying again. If the OSD(s)
continued failing, the operator would be stuck in a loop and never
respond to other CR updates.
Now the operator will log the OSD errors, if any, and complete the
orchestration. We will rely on K8s to continue to attempt to start
the OSD pods instead of the operator being stuck in the loop.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Because of this, the mgr would be restarted if the operator image
change. This must not happen.
Added unit tests for cephMgrOrchestratorModuleEnvs() as well.
Closes: https://github.com/rook/rook/issues/4361
Signed-off-by: Sébastien Han <seb@redhat.com>
Some log messages indicate when the upgrade checks will be
performed. If the Ceph image hasn't changed, the upgrade checks
are skipped. The messages were confusing if running a Rook
upgrade.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
A new controller to bootstrap ceph-crash pod on Ceph nodes running Ceph
pods only.
This implementation is unfortunately a mix of 'hacks' to make the daemon
working correclty. The ceph-crash script faced different issues:
* it's not a daemon
* it does not have any key in cephx
* it runs ceph commands under the hood which need an admin key and a
ceph.conf
On upstream Ceph, ceph-crash needs to grow better, once that happens we
will improve our implementation.
This also enhances osd provisionConfig struct with DataPathMap
Pod volumes and volume mount needs DataPathMap to perform the right
actions on log and crash dir. Exposing DataPathMap makes that possible.
Obviously, this is exposing ceph crash reports on the host as
well as pushing them into the mgr.
Basically, if a daemon fails, it'll put its core dump into
/var/lib/ceph/crash, bindmounting this dir on the host, ensures that the
crashes don't get lost when the pod dies.
Example:
```
[leseb@tarox~/go/src/github.com/rook/rook][rgw-liveprobe !] kubectl -n rook-ceph exec -ti rook-ceph-crashcollector-minikube-574858b99c-zvg4z bash
bash: warning: setlocale: LC_CTYPE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_COLLATE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_MESSAGES: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_NUMERIC: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_TIME: cannot change locale (en_US.UTF-8): No such file or directory
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ceph crash ls
[root@rook-ceph-osd-2-7644f99695-cljzh /]# pidof ceph-osd
13258 5415 5397
[root@rook-ceph-osd-2-7644f99695-cljzh /]# kill -SIGABRT 13258
[root@rook-ceph-osd-2-7644f99695-cljzh /]# ls /var/lib/ceph/crash/
2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96 posted
... wait maximum 10 min (ceph-crash scraps every 10 minutes)
... the container will exit
[root@rook-ceph-osd-2-7644f99695-cljzh /]# exit
[leseb@tarox~/go/src/github.com/rook/rook][rgw-liveprobe !]
[leseb@tarox~/go/src/github.com/rook/rook][rgw-liveprobe !] kubectl -n rook-ceph exec -ti rook-ceph-crashcollector-minikube-574858b99c-zvg4z bash
bash: warning: setlocale: LC_CTYPE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_COLLATE: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_MESSAGES: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_NUMERIC: cannot change locale (en_US.UTF-8): No such file or directory
bash: warning: setlocale: LC_TIME: cannot change locale (en_US.UTF-8): No such file or directory
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]#
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]#
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ceph crash ls
2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96 osd.1
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ls /var/lib/ceph/crash/
posted
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# ls /var/lib/ceph/crash/posted/
2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96
[root@rook-ceph-crashcollector-minikube-574858b99c-zvg4z /]# tail /var/lib/ceph/crash/posted/2019-11-12_12\:56\:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96/log
1/ 5 mgr
1/ 5 mgrc
1/ 5 dpdk
1/ 5 eventtrace
-2/-2 (syslog threshold)
-1/-1 (stderr threshold)
max_recent 10000
max_new 1000
log_file /var/lib/ceph/crash/2019-11-12_12:56:51.404109Z_39f060e1-776d-4605-8f28-85c97e53de96/log
--- end dump of recent events ---
```
Signed-off-by: Sébastien Han <seb@redhat.com>
Co-authored-by: Rohan CJ <rohantmp@gmail.com>
This change standardizes the ownerRefs of Ceph keyrings to
k8s Deployment resources across all daemons and refactors a
bit of duplicate code on keyring association for ease of
maintenance.
Fixes: #4089
Signed-off-by: egafford <egafford@redhat.com>
The mgr modules take some time to run and have also been known
to hang. While the hang issues should have been resolved separately,
an improvement is still to allow the configuration to happen
in parallel for unrelated modules. All of the module configuration
will be completed before continuing with osd configuration
in order to keep the logging simpler.
Signed-off-by: travisn <tnielsen@redhat.com>
Requests to enable mgr modules or call mgr modules should
timeout rather than hang. For example, if creating a self
signed cert request hangs, the mgr should continue with other
actions in the orchestration
Signed-off-by: travisn <tnielsen@redhat.com>
The current implementation was overriding any previous annotations set on
the object meta.
Moving the logic to its own method as well as adding unit tests.
Closes: https://github.com/rook/rook/issues/4106
Signed-off-by: Sébastien Han <seb@redhat.com>
Following the Ceph OSD rework, my test environment regularly failed to
start OSDs, as they would start before the postStart lifecyle hook which
was chown'ing the log and data directories could finish. Pods failed to
start for an arbitrarily long time before starting successfully. This
was a manifestation of a race condition identified in Ceph monitors in
https://github.com/rook/rook/pull/3594#discussion_r312279176
Create a Ceph operator-level method to create an init container that
will chown the necessary directories for all Ceph daemons (any daemon
which runs as the ceph:ceph user-and-group). Also add this container to
expectations for Ceph pod templates in unit tests.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
On rare occasion, the ceph checks might not be 100% correct and the user
might decide to force an upgrade anyway.
Correctly, if we are in an upgrade, we perform `ok-to-stop` check for
each daemon, if one of them fails, we retry and eventually fail.
They are corner-cases where users would like to force the upgrade anyway.
Enhance the new CR property: "skipUpgradeChecks: true".
Closes: https://github.com/rook/rook/issues/3872
Signed-off-by: Sébastien Han <seb@redhat.com>
Using port 8443 / dashboardHTTPS when not running HTTPS
is confusing, so use the dashboardHTTP port (7000 by
default) instead.
Also don't expose the dashboard port as "https-dashboard"
when not using https, instead expose as "dashboard".
Resolves#3810
Signed-off-by: Kristoffer Grönlund <kgronlund@suse.com>
Now that the pg_autoscaler is on by default, it is "normal" (and okay) to
have a small number of PGs in the cluster if the overall cluster usage is
also low. This setting just results in a health warning out of the box
when you create a pool and haven't written any data yet.
fyi: ceph upstream https://github.com/ceph/ceph/pull/30352
Signed-off-by: Sébastien Han <seb@redhat.com>
Starting with Nautilus 14.2.1 the dashboard SSL port is readed from <<mgr/dashboard/ssl_server_port>> ceph setting.
Previous versions use the port specified in <<mgr/dashboard/server_port>>
Addressed @travisn suggestion about use of <ssl> attribute in conditional.
This suggestion drove me to change the type of the SSl attribute (from *bool to bool) in the DashboardSpec Struct.
This makes code more clean/safe and make sure that the SSL atribute has always a meaningful value.
Now if you want to run the <secure dashboard> you need to set explicitly SSL to true, as is demonstrated in unit tests.
[x] Code generation (make codegen) has been run to update object specifications
Signed-off-by: Juan Miguel Olmo Martínez <jolmomar@redhat.com>
We can now enable via the cluster CR any manager module with a
setting under the new mgr element
mgr:
modules:
- name: pg_autoscaler
enabled: true
Co-authored-by: Sébastien Han <seb@redhat.com>
Co-authored-by: travisn <tnielsen@redhat.com>
Signed-off-by: travisn <tnielsen@redhat.com>
From now on, Rook will only perform check before upgrades when there is
an actual upgrade. So if the Ceph image changed and a new version is
desired Rook will go through all the daemons and update them one by one
and perform checks in between.
Closes: https://github.com/rook/rook/issues/3583
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph: Use the new NetworkSpec api
ceph: Change all tests to use the NetworkSpec
ceph: Remove TypeMeta field from NetworkSpec
ceph: Change IsHost network func signature
Signed-off-by: giovanism <giovanism@outlook.co.id>
This fixes that the MGR is binding to the gateway IP instead of the
actual Pod IP, as seen in #3136.
When hostNetwork: true is set the public-addrr is not set so custom
network configs can be used.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
With the 1.1 release we should not be creating bluestore OSDs
with rook's legacy partitioning scheme. All new bluestore OSDs
should be created with ceph-volume. Therefore, the miminum
version allowed is a version of mimic supporting ceph-volume.
This commit also adds consistent version checking between
the Add and Update methods for the operator handling the
CR events.
Signed-off-by: travisn <tnielsen@redhat.com>
this adds the access for rook to create monitoring resources
across namespaces and provides servicemonitor config to
monitor the current service being created
Signed-off-by: Umanga Chapagain <chapagainumanga@gmail.com>
Because the manager is running under the 'ceph' user the cephfs
subvolume plugin can not create directories anymore. It fails with a
permission denied because of the usage of the 'ceph' user, root is need
here, hence the special startup line to go over this.
Closes: https://github.com/ceph/ceph-csi/issues/486
Signed-off-by: Sébastien Han <seb@redhat.com>
Before each pod starts, the daemon changes the ownership of
/var/log/ceph which is bindmounted on a hostPath.
On OpenShift envionments, the container must be privileged in order to
successfully change the owernship.
Closes: https://github.com/rook/rook/issues/3485
Signed-off-by: Sébastien Han <seb@redhat.com>
At the beginning of every container startup we now change the ownership
of every known ceph directories to ceph:ceph.
This will allow daemons to start properly as well as allowing daemon to
writes their logs on files.
This is needed because ceph daemon now run as 'ceph' instead of 'root'
Signed-off-by: Sébastien Han <seb@redhat.com>
We do not determine the daemon type and name by string parsing anymore
but passing that info directly in the update call, it's more reliable.
Also removing a bunch of unused functions.
Signed-off-by: Sébastien Han <seb@redhat.com>
Do not consider clusterInfo Ceph version since it's the one picked by
the spec image.
The CephVersion provided here needs to be the current running version
of Ceph for when it is later passed to OkToStop and checked with
IsAtLeast. If you are upgrading from a pre 14.2.1 version to a
version 14.2.1 or newer, IsAtLeast will incorrectly return true and
then fail trying to run mon ok-to-stop on a mon pod running a pre 14.2.1 version.
Signed-off-by: Sébastien Han <seb@redhat.com>
When a cluster is updated with a different image version, this triggers
a serialized restart of all the pods. Prior to this commit, no safety
check were performed and rook was hoping for the best outcome.
Now before doing restarting a daemon we check it can be restarted. Once
it's restarted we also check we can pursue with the rest of the
platform. For instance, with monitors we check that they are in quorum,
for OSD we check that PGs are clean and for MDS we make sure they are
all active.
Fixes: https://github.com/rook/rook/issues/2889
Signed-off-by: Sébastien Han <seb@redhat.com>
The check for whether to set the OwnerReferences is no longer
necessary. When passing the correct value to the apiVersion,
the OwnerReferences can be successfully set for OpenShift.
Signed-off-by: travisn <tnielsen@redhat.com>
This commit does multiple things:
* remove support for AllNodes where we would deploy one rgw per node on
all the nodes.
* a transition path is implemented in the code so that if someone has an
existing deployment, daemonsets will be removed and replaced by an
deployments.
* when using "instances", each rgw deployed has its own key which makes
Ceph reporting the exact number of rgw running, see:
```
[root@rook-ceph-operator-775cf575c5-bh4sr /]# ceph -s
cluster:
id: 611fcf39-0669-4864-9a12-debb35c0397a
health: HEALTH_OK
services:
mon: 3 daemons, quorum a,b,c (age 12h)
mgr: a(active, since 12h)
osd: 3 osds: 3 up (since 12h), 3 in (since 12h)
rgw: 3 daemons active (my.store.a, my.store.b, my.store.c)
data:
pools: 6 pools, 600 pgs
objects: 235 objects, 3.8 KiB
usage: 3.0 GiB used, 84 GiB / 87 GiB avail
pgs: 600 active+clean
```
Closes: https://github.com/rook/rook/issues/2474, https://github.com/rook/rook/issues/2957 and https://github.com/rook/rook/issues/3245
Signed-off-by: Sébastien Han <seb@redhat.com>
Sébastien Han
Travis Nielsen
Nizamudeen
Juan Miguel Olmo Martínez
d-luu
egafford
Blaine Gardner
Kristoffer Grönlund
giovanism
Alexander Trost
ethan
Umanga Chapagain
Dinar Valeev
Christian Hüning
Noah Watkins