The exporter requires the mon config and keyring.
Use the CEPH_ARGS env var to specify the config
instead of expecting a ceph.conf to be generated
by another component on the host path.
Co-Authored-By: Travis Nielsen <tnielsen@redhat.com>
Signed-off-by: Avan Thakkar <athakkar@redhat.com>
(cherry picked from commit b6013d9b11)
Add container ports for OSD container only when multi cluster service is
enabled in the cluster spec.
Signed-off-by: sp98 <sapillai@redhat.com>
(cherry picked from commit 12bbc9b1a8)
ceph crash pod gets rook version label added unintentionally, which is only for deployment label.
changes include:
1, make a copy of the labels for pod spec from deployment labels just before adding rook version label.
2, add unit test to make sure it works as designed.
This fix along with pr 11674 is to stop ceph daemons pod restarting unnecessarily after upgrading rook operator.
Signed-off-by: Ben Gao <bengao168@msn.com>
(cherry picked from commit ed6ed25257)
If a kernel device name change happens and a block device file
in the OSD directory becomes dangling link, this OSD fails
to start continuously. This problem can be resolved by confirming
the validity of the device file and recreating it if necessary.
The original problem happened in host-based clusters. A similar
problem exists in PVC-based clusters. In this case, if a PV,
corresponds to an existing OSD, and points to a missing block
device file, the OSD pod fails to consume this PV. Although this
behavior is undesirable, I don't think this problem should be
handled in Rook. If doing so, we must re-create the existing PV.
Rook shouldn't do such work.
Closes: https://github.com/rook/rook/issues/10860
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
(cherry picked from commit 3a44a394b5)
The osd needs to bind to an ip that will allow both internal
and external access for rbd mirroring scenarios.
THe operator will create a service for each osd and
instruction the osd to bind to the pod ip while
publishing the clusterIP of the service as the
public IP.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 14e7225e0a18aff85ede1d476fcaddbbfbcbb732)
(cherry picked from commit d655c86b2f)
With the new mgr HA implementation (based on readiness probe) we
don't need the mgr sidecar (live-watch) anymore. This commit is
intended to remove all the related code.
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
(cherry picked from commit ff75ec96b7)
After an update, the mgr pod will be restarted. Since the
readiness probe will indicate the standby mgr pod is never
ready, we need to check simply for the running mgr pod
and not whether or not it is ready.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 4d1017f805)
few functions got change as they were deprecated
for ex: ioutil.Readfile change to os.Readfile
ioutil.TempFile change to os.CreateTemp
And fixed golang-ci-lint-issues
Signed-off-by: parth-gr <paarora@redhat.com>
(cherry picked from commit a84daf9bf0)
This fixes the the MultiClusterDeploySuite CI failure. The operator
is timing out waiting for the mgr deployments to be
ready, according to the WaitForDeploymentToStart() method. After
the reconcile times out after about five minutes, the next
reconcile succeeds since the wait is only done for new mgr
deployments.
Closes: https://github.com/rook/rook/issues/11685
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
(cherry picked from commit b464428978)
This commit adds code to supply variables required
to enable read affinity for rbd volumes.
It leverages `read_from_replica=localize,crush_locations=key:value`
krbd map option from ceph to serve reads from the most local OSD.
refer:
https://docs.ceph.com/en/latest/man/8/rbd/#kernel-rbd-krbd-options
Signed-off-by: Rakshith R <rar@redhat.com>
(cherry picked from commit 8b9ded1f77)
Set the rbd map default option to ms_mode=prefer_crc
when v2 ports are used and encryption is disabled.
If we dont pass/set the ms_mode in the map options
the kernel client will assume its using v1 ports
and map operation will fail.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The idea behind this change is to use the readiness probe to implement
the mgr HA mechanism. In the current ceph mgr implementation only the
active instance offers the command 'mgr_status' through the admin
socket. We use this command combined with a Readiness Exec Probe to
detect which manager is active. Kubernetes will automatically mark
it as ready and redirect any service traffic to the active instance.
Closes: https://github.com/rook/rook/issues/11640
Closes: https://github.com/rook/rook/issues/11638
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
The rook-version tag must not be set on the pod spec labels
since it will result in the ceph daemons being restarted every
time there is a rook version update, even if the ceph version
or pod spec was not otherwise updated.
The rook-version tag was being added to the OSD pod spec
due to a shared pointer to the labels. The code intended
to only add the version label to the deployment labels,
but since the pod labels shared the map variable, the
pod unintentionally also had the version label added.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Mons that are configured on msgr1 will be using the v1 port
in the csi driver since only one port is allowed in the configmap.
To allow mons to be started on v2 while keeping quorum with the
v1 mons, the v1 mons must continue running on the v1 port.
So even if msgr2 is required, allow existing v1 mons to continue
running on that port.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The default configmap does not have any labels or annotations
applied. If the helm chart is later updated to configure the
ceph config overrides, the configmap will fail to be created
by the chart since it doesn't have the needed label and helm
annotations so helm will know it can take over the resource
management.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Unset encryption configuration and default
rbd map option when the encryption is not
enabled or it disabled after sometime.
Unset compression option also when the compression
is disabled.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Environment variables are not recommended for secrets in pods since
they can be easily leaked if the environemnt variables are logged.
By mounting the mon secret as a file, the mgr and osd prepare pods
can read the mon secret from a file for better security.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The crash collector controller is designed for watching nodes where
ceph daemons are running, and ensuring a special daemon is running
on that node to provide additional support for ceph on that node.
The crash collector is the first example of a daemon that should be
running on all the ceph daemon nodes. The next example of such a
node daemon will be the ceph exporter that will listen for the
ceph metrics as described in the design doc.
https://github.com/rook/rook/blob/master/design/ceph/ceph-exporter.md
Now the crash collector controller is renamed to the node daemon controller
so the ceph exporter daemon can also be managed by the same controller.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The volume names of a pod must follow the standard naming convention
which does not allow periods in the name. Since the device set name
is used as the pvc name and then the volume name to attach to the osd
prepare job, we must sanitize the name for the invalid character
and replace it.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit implements this corner case during osd-prepare job.
```
The encrypted block is not opened, this is an extreme corner case
The OSD deployment has been removed manually AND the node rebooted
So we need to re-open the block to re-hydrate the OSDInfo.
Handling this case would mean, writing the encryption key on a
temporary file, then call luksOpen to open the encrypted block and
then call ceph-volume to list against the opened encrypted block.
We don't implement this, yet and return an error.
```
When underlying PVC for osd are CSI provisioned, the encrypted device
is closed when PVC is unmounted due to osd pod being deleted.
Therefore, this may occur more frequently and needs to be handled.
This commit implements the fix for the same.
Signed-off-by: Rakshith R <rar@redhat.com>
The fsid, username, and user secrets were from legacy and no
longer needed on the osd daemon or mon pods. This removes the
unnecessary env vars from the pod specs.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
A new variable is added to rook-ceph-operator-config
ConfigMap to allow using loop devices for osd.
This feature is intended to be used for testing purposes only.
Signed-off-by: Shinya Hayashi <shinya-hayashi@cybozu.co.jp>
The mons that are out of quorum may cause ceph commands to timeout
or fail unnecessarily trying to connect to a mon that is no longer
online. Now the mon health check will update the mon endpoints configmap
when a mon is detected out of quorum. This also means that if the
operator is restarted during a mon failover, the failed mon will no
longer remain in the ceph.conf, thus allowing the quorum to be more
likely to respond to the mons that are still in quorum.
The update for mons out of quorum only applies if other mons are in
quorum. If quorum is down, the configmap will not keep track of the offline
mons since too many are offline.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The monstore has a SetAll method for applying multiple settings
that was applying them individually. Now we use the assimilate
config option to make this more efficient.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>