`.spec.resources.osd` resources and `placement: all:` placements
parameters for the OSD pod did not reflect the value like
it has for other pods mon,mgr.
this commit will allow to set those parameters for the OSD pod also.
Signed-off-by: subhamkrai <srai@redhat.com>
The operator namespace is not used in the StartOperatorSettingsWatch()
method. Instead, the method looks up the namespace from the
POD_NAMESPACE env var.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Currently, mgr deployment has two overlapping environment variables, ROOK_POD_IP.
This causes kube-apiserver to create error logs
Signed-off-by: binoue <banji-inoue@cybozu.co.jp>
The OSD configuration on local devices was being skipped if a
storageClassDeviceSet was specified. Both types of OSDs should
be allowed in the same cluster, which allows a cluster in the cloud
to also take advantage of local devices with different perf
properties.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The deviceClass property was being ignored when creating the
non-pvc OSDs. Now the deviceClass will be specified as a property
for individual devices, all devices on a node, or all OSDs in the
cluster, depending on the level where the config is applied in the
cluster CR.
Co-authored-by: shenjiatong <yshxxsjt715@gmail.com>
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The arbiter can only be configured with the stretch cluster if the
CRUSH map is balanced and there are two zones in the CRUSH map.
After the OSDs are configured, we wait for all the OSD pods to be
running and that the CRUSH map is balanced. If it takes more than
two minutes, we fail the reconcile and try again. This is only done
the first time the stretch cluster is configured. In future reconciles
we first check if the stretch cluster is already enabled before
enabling it again.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The mon timeouts and pod retries were removed back in v1.1,
this just removes some obsolete variables from the legacy
mon scheduling.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The operator schedules all the mons at the same time, then
serially starts each of the mons. If the operator was restarted
or otherwise failed before all the mons were started, the next
reconcile will schedule new mons again and ignore the scheduling
that was already computed. Since the last mon running is always
expected to be in quorum, we can reset the maxMonId to be
the highest mon currently created.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The arbiter may have unique requirements for placement settings. Thus, if the arbiter
placement is specified in the cluster CR, that placement will be applied to the arbiter
mon and the other mons will retain their placement from the other mon or all
sections of the placement.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The node usage was used for the obsolete mon selection algorithm, which
was replaced long ago with placement via canary pods.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When the cluster is external we want to expose manager service port
along with the endpoints.
This allows us to connect but Rook will keep on using 9283 as a facing
port for Prometheus and more.
```
monitoring:
enabled: true
...
...
externalMgrPrometheusPort: 9283
```
Signed-off-by: Sébastien Han <seb@redhat.com>
Before cleaning up the cluster, we wait for all the daemon pods to be cleaned up. This fails when
a daemon is in pending state and has no NodeName. This PR ignores daemon pods that are not scheduled on any node.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
We can now collect logs directly into a side-car container.
A new CRD spec has been added:
spec:
logCollector:
enabled: true
periodicity: 24h
Every 24h we will rotate log files for each Ceph daemon.
Signed-off-by: Sébastien Han <seb@redhat.com>
We can now prioritize orchestrations on certain event. Today only two
events will cancel on-going orchestrations (if any):
* request for cluster deletion
* request for cluster upgrade
If one of the two are caught by the watcher we will cancel the on-going
orchestration.
For that we implemented a simple approach based on check points, where
we will check for a cancellation request in certain part of the
orchestration. Mainly before each mons/mgr/osds orchestration loops.
This solution is not perfect, but we are waiting for the
controller-runtime to release its 0.7 version which will embed context
support. With that we will be able to cancel reconciles more precisely
and rapidly.
Operator log example:
```
2020-11-24 13:54:59.499719 I | op-mon: parsing mon endpoints: a=10.109.126.120:6789
2020-11-24 13:54:59.499719 I | op-mon: parsing mon endpoints: a=10.109.126.120:6789
2020-11-25 12:59:12.986264 I | ceph-cluster-controller: done reconciling ceph cluster in namespace "rook-ceph"
2020-11-25 13:07:33.776947 I | ceph-cluster-controller: CR has changed for "rook-ceph". diff= v1.ClusterSpec{
CephVersion: v1.CephVersionSpec{
Image: "ceph/ceph:v15.2.5",
- AllowUnsupported: true,
+ AllowUnsupported: false,
},
DriveGroups: nil,
Storage: {UseAllNodes: true, Selection: {UseAllDevices: &true}},
... // 20 identical fields
}
2020-11-25 13:07:33.777039 I | ceph-cluster-controller: reconciling ceph cluster in namespace "rook-ceph"
2020-11-25 13:07:33.785088 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:33.788626 I | ceph-cluster-controller: detecting the ceph image version for image ceph/ceph:v15.2.5...
2020-11-25 13:07:35.280789 I | ceph-cluster-controller: detected ceph image version: "15.2.5-0 octopus"
2020-11-25 13:07:35.280806 I | ceph-cluster-controller: validating ceph version from provided image
2020-11-25 13:07:35.285888 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:35.287828 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:35.288082 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:35.621625 I | ceph-cluster-controller: cluster "rook-ceph": version "15.2.5-0 octopus" detected for image "ceph/ceph:v15.2.5"
2020-11-25 13:07:35.642688 I | op-mon: start running mons
2020-11-25 13:07:35.646323 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:35.654070 I | op-mon: saved mon endpoints to config map map[csi-cluster-config-json:[{"clusterID":"rook-ceph","monitors":["10.107.242.49:6789","10.109.71.30:6789","10.98.93.224:6789"]}] data:a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789 mapping:{"node":{"a":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"b":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"c":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"}}} maxMonId:2]
2020-11-25 13:07:35.868253 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:35.868573 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:37.074353 I | op-mon: targeting the mon count 3
2020-11-25 13:07:38.153435 I | op-mon: checking for basic quorum with existing mons
2020-11-25 13:07:38.178029 I | op-mon: mon "a" endpoint is [v2:10.107.242.49:3300,v1:10.107.242.49:6789]
2020-11-25 13:07:38.670191 I | op-mon: mon "b" endpoint is [v2:10.109.71.30:3300,v1:10.109.71.30:6789]
2020-11-25 13:07:39.477820 I | op-mon: mon "c" endpoint is [v2:10.98.93.224:3300,v1:10.98.93.224:6789]
2020-11-25 13:07:39.874094 I | op-mon: saved mon endpoints to config map map[csi-cluster-config-json:[{"clusterID":"rook-ceph","monitors":["10.107.242.49:6789","10.109.71.30:6789","10.98.93.224:6789"]}] data:a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789 mapping:{"node":{"a":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"b":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"},"c":{"Name":"minikube","Hostname":"minikube","Address":"192.168.39.3"}}} maxMonId:2]
2020-11-25 13:07:40.467999 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:40.469733 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:41.071710 I | cephclient: writing config file /var/lib/rook/rook-ceph/rook-ceph.config
2020-11-25 13:07:41.078903 I | cephclient: generated admin config in /var/lib/rook/rook-ceph
2020-11-25 13:07:41.125233 I | op-mon: deployment for mon rook-ceph-mon-a already exists. updating if needed
2020-11-25 13:07:41.327778 I | op-k8sutil: updating deployment "rook-ceph-mon-a" after verifying it is safe to stop
2020-11-25 13:07:41.327895 I | op-mon: checking if we can stop the deployment rook-ceph-mon-a
2020-11-25 13:07:44.045644 I | op-k8sutil: finished waiting for updated deployment "rook-ceph-mon-a"
2020-11-25 13:07:44.045706 I | op-mon: checking if we can continue the deployment rook-ceph-mon-a
2020-11-25 13:07:44.045740 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:44.109159 I | op-mon: mons running: [a b c]
2020-11-25 13:07:44.474596 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:44.478565 I | op-mon: deployment for mon rook-ceph-mon-b already exists. updating if needed
2020-11-25 13:07:44.493374 I | op-k8sutil: updating deployment "rook-ceph-mon-b" after verifying it is safe to stop
2020-11-25 13:07:44.493403 I | op-mon: checking if we can stop the deployment rook-ceph-mon-b
2020-11-25 13:07:47.135524 I | op-k8sutil: finished waiting for updated deployment "rook-ceph-mon-b"
2020-11-25 13:07:47.135542 I | op-mon: checking if we can continue the deployment rook-ceph-mon-b
2020-11-25 13:07:47.135551 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:47.148820 I | op-mon: mons running: [a b c]
2020-11-25 13:07:47.445946 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:47.448991 I | op-mon: deployment for mon rook-ceph-mon-c already exists. updating if needed
2020-11-25 13:07:47.462041 I | op-k8sutil: updating deployment "rook-ceph-mon-c" after verifying it is safe to stop
2020-11-25 13:07:47.462060 I | op-mon: checking if we can stop the deployment rook-ceph-mon-c
2020-11-25 13:07:48.853118 I | ceph-cluster-controller: CR has changed for "rook-ceph". diff= v1.ClusterSpec{
CephVersion: v1.CephVersionSpec{
- Image: "ceph/ceph:v15.2.5",
+ Image: "ceph/ceph:v15.2.6",
AllowUnsupported: false,
},
DriveGroups: nil,
Storage: {UseAllNodes: true, Selection: {UseAllDevices: &true}},
... // 20 identical fields
}
2020-11-25 13:07:48.853140 I | ceph-cluster-controller: upgrade requested, cancelling any ongoing orchestration
2020-11-25 13:07:50.119584 I | op-k8sutil: finished waiting for updated deployment "rook-ceph-mon-c"
2020-11-25 13:07:50.119606 I | op-mon: checking if we can continue the deployment rook-ceph-mon-c
2020-11-25 13:07:50.119619 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:50.130860 I | op-mon: mons running: [a b c]
2020-11-25 13:07:50.431341 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:50.431361 I | op-mon: mons created: 3
2020-11-25 13:07:50.734156 I | op-mon: waiting for mon quorum with [a b c]
2020-11-25 13:07:50.745763 I | op-mon: mons running: [a b c]
2020-11-25 13:07:51.045108 I | op-mon: Monitors in quorum: [a b c]
2020-11-25 13:07:51.054497 E | ceph-cluster-controller: failed to reconcile. failed to reconcile cluster "rook-ceph": failed to configure local ceph cluster: failed to create cluster: CANCELLING CURRENT ORCHESTATION
2020-11-25 13:07:52.055208 I | ceph-cluster-controller: reconciling ceph cluster in namespace "rook-ceph"
2020-11-25 13:07:52.070690 I | op-mon: parsing mon endpoints: a=10.107.242.49:6789,b=10.109.71.30:6789,c=10.98.93.224:6789
2020-11-25 13:07:52.088979 I | ceph-cluster-controller: detecting the ceph image version for image ceph/ceph:v15.2.6...
2020-11-25 13:07:53.904811 I | ceph-cluster-controller: detected ceph image version: "15.2.6-0 octopus"
2020-11-25 13:07:53.904862 I | ceph-cluster-controller: validating ceph version from provided image
```
Closes: https://github.com/rook/rook/issues/6587
Signed-off-by: Sébastien Han <seb@redhat.com>
Rook's crashcollector pod posts entries to the ceph cluster when a crash occurs.
Over time the number cluster may hold crash entries needlessly.
To clean up old crash entries, this PR adds a field to the ceph cluster CR for the user to specify the number of days a crash entry should be kept for.
Providing a value for the field keepXDays creates a cronjob that runs every day at midnight, calling "ceph crash prune <keepXDays>".
Closes: https://github.com/rook/rook/issues/6332
Signed-off-by: Renan Campos <rcampos@redhat.com>
Since we moved to the controller-runtime, events are processed one by
one and so are reconciles. This means we won't have multiple
orchestrations happening at the same time. Thus removing this code.
Also removing one unused variable.
Signed-off-by: Sébastien Han <seb@redhat.com>
-creates a single PDB (max-unavailable=1) for all OSDs. This PDB allows one OSD to go down at a given time.
-When a drain is detected, blocking PDBs (max-unavailable=0) will be created for each failure domain that is not being drained and the main PDB (max-unavilable=1) will be deleted. This will allow all the OSDs in the currently drained failure domain to be removed while blocking the deletion of OSDs in other failure domains.
-Once the PGs are healthy again, the blocking PDBs will be deleted and the main PDB will be restored.
-Add PG healthcheck timeout
-Delete any legacy node drain pods and blocking OSD PDBs
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
In a disaster recovery scenario, the mon service may have been
accidentally deleted, while the expected mon endpoint is still
found in the mon endpoints configmap. In this case, we create
the mon service with the same endpoint as previously.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Added the support of NAD from diffrent namespaces.
they can be referrenced as <namespace>/<name-of-nad> e.g.,
default/public-nw.
Updated the multus doc to explain the same.
Signed-off-by: rohan47 <rohgupta@redhat.com>
Found by running the following command:
codespell -S .git,*.png,*.jpg -L \
aks,keyserver,atleast,dne,ser,ist,files\',ba,dum,iam,te -f -H
Signed-off-by: Mateusz Gozdek <mgozdekof@gmail.com>
These are a collection of unstable ceph release that are not recommended
for production. It is recommended to rollback to the previous or
upgrading to the next one if possible.
Signed-off-by: Sébastien Han <seb@redhat.com>
Instead of directly defining our own constants, we should be using the k8s
constants for the well-known topology labels.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Pools in stretch clusters will all use the same crush rule that
is generated by the operator when configuring the cluster for
stretch mode, with replica 4 and two replicas per failure domain.
Pools cannot create new crush rules, so we require that replica be
4 when the pools is created, EC is not allowed, and no new
crush rule will be created.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
In clusters where only two datacenters (or similar failure domains)
are available, a different mon and osd approach is needed to deal
with the network partitions or some other reason for one of the failure
domains going down. The Ceph stretched cluster makes the mons aware
of the failure domains by configuring one as the arbiter in a third
zone, while keeping two replicas of the data in each of the data
zoens.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The mon canaries are now being added and removed at the same time
instead of starting or stopping them one-by-one. This will simplify
scheduling execution time to much more quickly detect where the mons
can be scheduled.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We now support VAULT_TLS_SERVER_NAME which represents the name to use as
the SNI host when connecting via TLS.
This is typically needed when a single host has multiple certificates,
same as virtual hosts but for SSL certificates.
Signed-off-by: Sébastien Han <seb@redhat.com>
Just like we do for the monitors, we set an ownerref to the OSD PVC so
when the cluster is deleted we remove the PVC too.
Signed-off-by: Sébastien Han <seb@redhat.com>
When the Ceph cluster runs on PVC and the OSDs are encrypted we can
store LUKS's Key Encryption Key inside a Key Management System. Today,
Rook only supports HashiCorp Vault: https://www.vaultproject.io/
The CephCluster has now a new "security" field which will plug onto the
KMS. Here is an example:
security:
kms:
tokenSecretName: <name of the secret containing a Vault token, used
to authenticate>
connectionDetails: < a map of strings containing connection
information>
Refer to the ceph-cluster-crd documentation to lear more.
Closes: https://github.com/rook/rook/issues/6105
Signed-off-by: Sébastien Han <seb@redhat.com>
The CRUSH map does not allow duplicate values (nor keys) for the
labels. That means that if the currently hardcoded label value
`default` occurs anywhere else in the tree (for example, because
some of the topology labels provided by the cloud provider use it),
the cluster cannot sucessfully spawn.
By giving the user control over the label value used for the root
CRUSH map label, it is possible to adapt the cluster to this
situation.
To be able to actually use the `default` value, the root=default
node which is created by default by ceph itself has to be removed;
since that node is accompanied by a replicated crush rule, we have
to remove that rule, too.
The integration tests are modified to sometimes use the custom
crushRoot (based on an arbitrary criterium) to get coverage across
the various suites. Separate tests could be added, but were not
deemed necessary at this point.
Fixes#4993.
Signed-off-by: Jonas Schäfer <jonas.schaefer@cloudandheat.com>
adding fields `TotalBytes`, `UsedBytes`, `AvailableBytes`
`LastUpdated` to the ceph cluster CR's status section to
report the storage details of ceph cluster.
`TotalBytes`: Total storage capacity in bytes
`UsedBytes`: Total storage used in bytes
`AvailableBytes`: Total storage used in bytes(Total - Used)
`LastUpdated`: Last update time
for example(I have added 10GB disk):
`kubectl get cephclusters.ceph.rook.io -o yaml`
```
status:
ceph:
capacity:
bytesAvailable: 9657188352
bytesTotal: 10733223936
bytesUsed: 1076035584
lastUpdated: "2020-10-23T12:57:48Z"
```
Signed-off-by: subhamkrai <srai@redhat.com>
The mon resources may be orphaned if there is a mon failover
that was cancelled, for example a mon pvc may remain if the
original mon comes up and the operator was restarted before
the mon failover completed. The cleaning up of mon resources
was only happening was each successful mon failover, now we
perform the check with every reconcile since the resources
were not being cleaned up predictably enough.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
golangci-lint linter gosec showing more errors
than gosec gh. This commit resolve
new errors. And, removing
nosec comments from autogenerated files.
Signed-off-by: subhamkrai <srai@redhat.com>
The ceph mons should never be started with an even number in quorum.
The desired state should always be an odd number of mons to ensure
a healthy majority quorum. The operator now rejects a request for
an even number of mons.
If there are not a sufficient number of nodes for mons to be on a
unique host, the operator also returns an early error instead of
getting stuck waiting for a pending mon. This is not foolproof since
there might be fewer available nodes for the mons, but at least it
is a quick check for the common case.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When a node is not tolerable, also output the node name so it's clear
which not it is which is not tolerable.
Signed-off-by: Thomas Bechtold <tbechtold@suse.com>
We can now tune the value of TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES by
setting an annotation on the CephCluster CRD like so:
```
annotation:
osd:
TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES: "134217728"
```
Alternatively, if nothing is specified Rook will read the value of the
file `/etc/sysconfig/ceph`.
Closes: https://github.com/rook/rook/issues/6134
Signed-off-by: Sébastien Han <seb@redhat.com>
Once we close the channel for the monitoring daemons, we update the
monitoring status so as to not call them again.
This is to prevent "close of closed channel" panic.
Co-authored-by: Travis Nielsen <tnielsen@redhat.com>
Signed-off-by: Nitin Goyal <nigoyal@redhat.com>
Signed-off-by: Raghavendra Talur <raghavendra.talur@gmail.com>
subhamkrai
Travis Nielsen
binoue
Sébastien Han
Blaine Gardner
Santosh Pillai
Renan Campos
Arun Kumar Mohan
rohan47
Mateusz Gozdek
Yusei Nishiyama
Jonas Schäfer
Thomas Bechtold
Raghavendra TalurandTravis Nielsen