We have introduced a new goroutine to check the state of the rgw
endpoint. It will run every minute and perform operations on a bucket.
The success or failure will be reported as part of the status field of
the CephObjectStore CR.
A good status will look like:
status:
endpointStatus:
lastChanged: "2020-06-25T13:47:45Z"
lastChecked: "2020-06-25T13:48:46Z"
phase: Connected
A failed status:
status:
endpointStatus:
details: |-
error creating bucket "rook-ceph-internal-s3-bucket-checker": RequestError: send request failed
caused by: Put http://rook-ceph-rgw-my-store.rook-ceph:8080/rook-ceph-internal-s3-bucket-checker: dial tcp 10.108.189.148:8080: connect: connection refused
health: ERROR
This check works for both converged and external modes. Note that the
CephObjectStore CRD has a new field called "externalRgwEndpoints" which
allows you to define a list of IP addresses pointing to rgws.
Closes: https://github.com/rook/rook/issues/5692
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit contains CR implementations for:
CephObjectRealm
CephObjectZoneGroup
CephObjectZone
Also there are changes made to the objectstore
to add rgws in the object-store to zones and
zone groups in a multisite configuration and
the removal of the --default parameter for any
realms/zonegroups/zones that are created.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
If host networking is not enabled add preferred pod anti-affinity on rgw pods to
improve spread of them
Signed-off-by: n.fraison <n.fraison@criteo.com>
Because the secret is mounted and owned by root and the rgw is running
under the 'ceph' user then it cannot access it. So moving from 0400 to
0444 fixes the issue.
Closes: https://github.com/rook/rook/issues/5265
Signed-off-by: Sébastien Han <seb@redhat.com>
ceph gid (167) provided as supplymentary group, so that all the mounts can
be accessed by the same. This is required for ssl certificate consumed by
the rgw server from ceph octopus onwards.
Closes: https://github.com/rook/rook/issues/5265
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
There are some code where constants of environment variables
are defined but not used properly. Let's avoid to use string
literals as possible.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
In the v1.3 release the target port for the rgw daemons changed to 8080.
The upgrade was skipping the service update anytime the service already existed.
Now the service will be updated with every reconcile to ensure the target port
is correct.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
You can now use Rook along with Multus. Multus must be up and running
and the right ressources must exist such as NetworkAttachmentDefinition
CR.
The Cluster CR spec has new fields to work with multus:
network:
provider: multus (or 'host' for hostNetworking)
selectors:
public: NetworkAttachmentDefinition name
cluster: NetworkAttachmentDefinition name
If only a single NetworkAttachmentDefinition is provided Rook will use
both anyway for the Ceph traffic.
Please refer to the doc to learn more.
Closes: https://github.com/rook/rook/issues/4716
Signed-off-by: Sébastien Han <seb@redhat.com>
When running on SDN, the container is not privileged and the network
stack is not exposed so running the gw on port 80 will not work (not
enough privileged).
Closes: https://github.com/rook/rook/issues/5106
Signed-off-by: Sébastien Han <seb@redhat.com>
The CRD watcher has been replaced by the new controller-runtime
framework.
This brings robustness in our operator, meaning that any resources that
are modified will be reconciled into the desired state.
Closes: https://github.com/rook/rook/issues/4937
Signed-off-by: Sébastien Han <seb@redhat.com>
Now, the CephBlockPool CRD is managed with the controller-runtime.
So the watcher is outside of the main controller reconciliation loop of
CephCluster which brings numerous benefit such as:
* having its own reconciliation loop
* won't block anything from the main CephCluster controller loop
* fast than waiting for CephCluster loop to completion
Partially close: https://github.com/rook/rook/issues/1981
Signed-off-by: Sébastien Han <seb@redhat.com>
Code for pod anti affinity mechanism on ceph gateways is a duplica of the one used by ceph mon.
This is a refacto to use same code on both components
Signed-off-by: n.fraison <n.fraison@criteo.com>
Reduce from 5 minutes to less than 50 seconds the time needed to restart a
mgr and osds(PVCs based),rgw,mds,rbd,nfs and toolbox pod that was running
in a k8s "NotReady" Node.
A new Rook Operator setting has been added to allow the user to set the
time used in pod's toleration <node.kubernetes.io/unreachable>:
ROOK_UNREACHABLE_NODE_TOLERATION_SECONDS = <5>
New setting added in release notes
Addressed @travisn,@leseb, and @blaineEXE suggestions
Signed-off-by: Juan Miguel Olmo Martínez <jolmomar@redhat.com>
Both --id and --name do the same thing, so let's use one only: --id
which is shared accross all the daemons already.
Signed-off-by: Sébastien Han <seb@redhat.com>
rgw needs the fronted on its cli line to select the fronted as well the
port. This option is not supported in the mon config store.
Closes: https://github.com/rook/rook/issues/4471
Signed-off-by: Sébastien Han <seb@redhat.com>
As performed with mon, gateways from same ceph object store
must not run on the same host if hostNetwork is set to true
Signed-off-by: n.fraison <n.fraison@criteo.com>
The Ceph Mimic release introduced the monitor config store which allows
us to set configuration flag per daemon in a centralized fashion. Let's
use it for Mimic and newer and keep the CLI flag of daemon startup for
older versions.
The main benefit is that the config of a daemon can now be overridden.
Closes: https://github.com/rook/rook/issues/4307
Signed-off-by: Sébastien Han <seb@redhat.com>
Failure to create a keyring prior to creating a deployment
dependent on that keyring created a race conditition resulting
in an intermittent and unnecessary pod failure. This change
creates a keyring prior to any RGW deployment.
Partially fixes: #4089
Signed-off-by: egafford <egafford@redhat.com>
Following the Ceph OSD rework, my test environment regularly failed to
start OSDs, as they would start before the postStart lifecyle hook which
was chown'ing the log and data directories could finish. Pods failed to
start for an arbitrarily long time before starting successfully. This
was a manifestation of a race condition identified in Ceph monitors in
https://github.com/rook/rook/pull/3594#discussion_r312279176
Create a Ceph operator-level method to create an init container that
will chown the necessary directories for all Ceph daemons (any daemon
which runs as the ceph:ceph user-and-group). Also add this container to
expectations for Ceph pod templates in unit tests.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Allow users to specify overrides in the CephCluster CRD. The override
ConfigMap still exists for emergency situations and is mounted into
daemon pods directly instead of being merged into a Rook-created config
file.
Rook Ceph no longer uses a config file for managing daemons with the
exception of the OSDs which still generate a config in an init
container.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
ceph: Use the new NetworkSpec api
ceph: Change all tests to use the NetworkSpec
ceph: Remove TypeMeta field from NetworkSpec
ceph: Change IsHost network func signature
Signed-off-by: giovanism <giovanism@outlook.co.id>
When configuring an external cluster the orchestration of discover and all the ceph
daemons will be skipped. The operator will still watch for the creation of
crds for this namespace. When a filesystem, object, object user, or
ganesha crd are created, the operator will simply print an error
to the log.
Signed-off-by: travisn <tnielsen@redhat.com>
Signed-off-by: Sébastien Han <seb@redhat.com>
Before each pod starts, the daemon changes the ownership of
/var/log/ceph which is bindmounted on a hostPath.
On OpenShift envionments, the container must be privileged in order to
successfully change the owernship.
Closes: https://github.com/rook/rook/issues/3485
Signed-off-by: Sébastien Han <seb@redhat.com>
At the beginning of every container startup we now change the ownership
of every known ceph directories to ceph:ceph.
This will allow daemons to start properly as well as allowing daemon to
writes their logs on files.
This is needed because ceph daemon now run as 'ceph' instead of 'root'
Signed-off-by: Sébastien Han <seb@redhat.com>
This method does not start anything but creates the deployment. So let's
rename it to createDeployment() instead.
Signed-off-by: Sébastien Han <seb@redhat.com>
rgw wasn't using UpdateDeploymentAndWait() to update its deployment
configuration. We now use it so that it's consistent with the other
daemons configuration.
Signed-off-by: Sébastien Han <seb@redhat.com>
The check for whether to set the OwnerReferences is no longer
necessary. When passing the correct value to the apiVersion,
the OwnerReferences can be successfully set for OpenShift.
Signed-off-by: travisn <tnielsen@redhat.com>
This commit does multiple things:
* remove support for AllNodes where we would deploy one rgw per node on
all the nodes.
* a transition path is implemented in the code so that if someone has an
existing deployment, daemonsets will be removed and replaced by an
deployments.
* when using "instances", each rgw deployed has its own key which makes
Ceph reporting the exact number of rgw running, see:
```
[root@rook-ceph-operator-775cf575c5-bh4sr /]# ceph -s
cluster:
id: 611fcf39-0669-4864-9a12-debb35c0397a
health: HEALTH_OK
services:
mon: 3 daemons, quorum a,b,c (age 12h)
mgr: a(active, since 12h)
osd: 3 osds: 3 up (since 12h), 3 in (since 12h)
rgw: 3 daemons active (my.store.a, my.store.b, my.store.c)
data:
pools: 6 pools, 600 pgs
objects: 235 objects, 3.8 KiB
usage: 3.0 GiB used, 84 GiB / 87 GiB avail
pgs: 600 active+clean
```
Closes: https://github.com/rook/rook/issues/2474, https://github.com/rook/rook/issues/2957 and https://github.com/rook/rook/issues/3245
Signed-off-by: Sébastien Han <seb@redhat.com>
Add a 'ceph-version' label to application controllers in the same manner
as the prior 'rook-version' label to help with upgrades.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Allow the user to set annotations in the CRDs of the following operators which will then be set on
the resulting Pods (Deployments, StatefulSets and so on).
Operators:
* Cassandra
* Ceph
* CockroachDB
* EdgeFS
* Minio
* NFS
The Annotations related structures have been added to the
rook.io/v1alpha2 pkg.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
Add a `rook-version` label to all controller resources used by Ceph:
deployments, daemonsets, and jobs. Labels are added to controller
resources only and not to the pod templates within because changing pod
templates causes updates due to the label change. The controller
resources themselves are not updated with the label addition and
therefore don't cause an unnecessary upgrade.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
All usages of k8s go client are now also using the versioned `AppsV1() `
call for the client.
Updated MySQL and Wordpress, and Kube Registy examples to use apps/v1
Deployments.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
Upgrading a Ceph objectstore was failing the upgrade test because the
existing method for handling the case where update errors occurred
because labels and label selectors have changed was not robust enough.
Make this more robust by attempting delete-and-create if a normal update
does not work on an rgw deployment.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
In the form of mon, mgr, mds, and rgw, convert the rbd-mirror to be
configured completely from the operator. This is a straightforward
conversion with one functional addition: the rbd-mirror daemon stores
*no* data and has no default data dir, so the concept of a `Dataless`
daemon is here introduced.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Configure the Ceph rgw daemon completely from the operator a la the
recent changes to the Ceph mon, mgr, and mds operators.
Create the rgw deployment or daemonset first, and then create the
keyring secret for the object store with its owner reference as the
corresponding deployment or daemonset. When the replication controller
is deleted, the secret is also deleted.
The RGW's mime.types file is now stored in a configmap with a different
file created for each object store. This is primarily just a means to
get the mime.types file into the rgw pod, but the added benefit is that
the administrator can modify the configmap, which could reduce
susceptibility to file type execution vulnerabilities (worst case).
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
The mgr orchestrator modules need the container image to run
the ceph image for blinking the lights when a disk is down
Signed-off-by: travisn <tnielsen@redhat.com>
Verify that the expected deployments are updated in the Ceph mgr,
and mds unit tests.
This also allows those unit tests to pass at all since
UpdateDeploymentAndWait was blocking the unit tests from finishing due
to unexpected behavior of generated `Deployment.Update` unit test mock.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Sébastien Han
Ali Maredia
n.fraison
Jiffin Tony Thottan
Madhu Rajanna
Satoru Takeuchi
Travis Nielsen
Juan Miguel Olmo Martínez
Mark Kogan
Blaine Gardner
d-luu
egafford
giovanism
Alexander Trost
Huamin Chen
Jack Lauritsen