remove csi drivers and delete k8s
services that drivers create,when
the default setting of drivers changed
to false.
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
We have introduced a new goroutine to check the state of the rgw
endpoint. It will run every minute and perform operations on a bucket.
The success or failure will be reported as part of the status field of
the CephObjectStore CR.
A good status will look like:
status:
endpointStatus:
lastChanged: "2020-06-25T13:47:45Z"
lastChecked: "2020-06-25T13:48:46Z"
phase: Connected
A failed status:
status:
endpointStatus:
details: |-
error creating bucket "rook-ceph-internal-s3-bucket-checker": RequestError: send request failed
caused by: Put http://rook-ceph-rgw-my-store.rook-ceph:8080/rook-ceph-internal-s3-bucket-checker: dial tcp 10.108.189.148:8080: connect: connection refused
health: ERROR
This check works for both converged and external modes. Note that the
CephObjectStore CRD has a new field called "externalRgwEndpoints" which
allows you to define a list of IP addresses pointing to rgws.
Closes: https://github.com/rook/rook/issues/5692
Signed-off-by: Sébastien Han <seb@redhat.com>
The operator should only print helpful info messages
when an OSD is going to be updated. If the OSD hasn't
changed it is just a debug message.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The pod deletion is needed by other daemons besides the osds,
so we move the helper method into the k8sutil package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
An OSD on a PVC when portable=false is assigned to a node
with a node selector. The same node assignment is expected
for the lifetime of the cluster. On subsequent reconciles,
the operator was looking up the node assignment from the
nodeName on the pod spec, which is not set if the pod is down.
The operator needs to retrieve the assignment from the
deployment spec node selector.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The operator settings can come either from the configmap, an
env var, or a default value. Knowing where the setting is loaded
from is an important detail to see in the log.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
YamlToContainerResource can be used to convert the raw
string data to the array of ContainerResource.
the ContainerResource can be applied to the
pod container resources request and limits.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
This is the final conversion to controller-runtime conversion. This time the
CephCluster CRD has been converted to use the controller-runtime
library.
The controller incorporates all the previous watchers too, so the Node
and hot-plug configmap are been watched too.
Only the operator setting configmap is not being watcher since it's not
related to the CephCluster CRD.
Not only the patch converts to controller-runtime but also tries to
re-organize the tree of the repo to actually make the code more
readable and have better functions/methods/tests separations.
Closes: https://github.com/rook/rook/issues/4939
Signed-off-by: Sébastien Han <seb@redhat.com>
You can now use Rook along with Multus. Multus must be up and running
and the right ressources must exist such as NetworkAttachmentDefinition
CR.
The Cluster CR spec has new fields to work with multus:
network:
provider: multus (or 'host' for hostNetworking)
selectors:
public: NetworkAttachmentDefinition name
cluster: NetworkAttachmentDefinition name
If only a single NetworkAttachmentDefinition is provided Rook will use
both anyway for the Ceph traffic.
Please refer to the doc to learn more.
Closes: https://github.com/rook/rook/issues/4716
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit adds all the CSI configurations to ConfigMap.
This configMap can be used in combination with Env Vars
to configure Ceph CSI drivers in rook.
Signed-off-by: Umanga Chapagain <chapagainumanga@gmail.com>
If a deployment stays in pending we should give early by looking at
ProgressDeadlineExceeded, this will reduce the time to wait from 20 min
to 10 min because ProgressDeadlineExceeded default is 600 seconds.
Prior to this patch we would wait 20min since we take
currentDeployment.Spec.ProgressDeadlineSeconds which is typically 600
then retry every 2 seconds, which makes it 20min total.
Closes: https://github.com/rook/rook/issues/5090
Signed-off-by: Sébastien Han <seb@redhat.com>
with older implementation, servicemonitor was not getting
updated due to missing resource version. This fix adds
resource version to the servicemonitor definition and
ensures that the object is properly created or
updated.
Signed-off-by: Umanga Chapagain <chapagainumanga@gmail.com>
The ceph commands are now only written to the log in debug mode.
For commands that change the system state we now ensure that
a useful log entry is written. If all the details of the ceph
commands are needed, debug logging should still be enabled.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
As part of the transition to support Ceph release **as of** Nautilus, we
left over that portion of code.
We don't need it anymore.
Signed-off-by: Sébastien Han <seb@redhat.com>
The OSDs pick up on several topology labels for CRUSH hierarchy.
The GA label topology.kubernetes.io was partially implemented, but
not picked up by the OSDs. Now the OSDs will pick up both the topology
labels from pre-1.17 such as failure-domain.beta.kubernetes.io/zone
and topology.kubernetes.io/zone.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Now, the CephBlockPool CRD is managed with the controller-runtime.
So the watcher is outside of the main controller reconciliation loop of
CephCluster which brings numerous benefit such as:
* having its own reconciliation loop
* won't block anything from the main CephCluster controller loop
* fast than waiting for CephCluster loop to completion
Partially close: https://github.com/rook/rook/issues/1981
Signed-off-by: Sébastien Han <seb@redhat.com>
The rook types used across the storage providers moved from the v1alpha2
package to the v1 package. This commit points the packages at their new
location. Implementation is expected to remain unchanged.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit is to handle all those unhandled errors which raises the gosec warning.
Fixed G104: Unhandled Errors are handled now
Signed-off-by: Nizamudeen <nia@redhat.com>
The job to wipe devices fails the integration tests periodically.
Now the job will be retried once if it fails to retry wiping the
disks.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit is also part of gosec error handling which handles the following issue:
Fixed G304: Potential File inclusion by cleaning up the file path
Signed-off-by: Nizamudeen <nia@redhat.com>
"rook-ceph-operator-config" can be used to override Env Var
initialized during operator deployment.
This commit makes use of the ConfigMap to determine NodeAffinity
and Tolerations for ceph-csi drivers.
Closes#3239
Signed-off-by: Umanga Chapagain <chapagainumanga@gmail.com>
This change sets the ResourceVersion on the PrometheusRule object before
it is updated in Kubernetes.
This change fixes the following error
```
is invalid: metadata.resourceVersion: Invalid value: 0x0: must be specified for an update
```
which can occur during update when no ResourceVersion is set.
Resolves#4528
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
Code for pod anti affinity mechanism on ceph gateways is a duplica of the one used by ceph mon.
This is a refacto to use same code on both components
Signed-off-by: n.fraison <n.fraison@criteo.com>
We now always perform ok-to-stop change when the deployment is going to
be updated. This could be for various reasons like change in the spec or
a new Ceph image.
In any case, if Ceph resources are going to be restarted this must be
done carefully.
Also trimmed the isUpgrade variable, the upcoming commit will remove the
need of that variable.
Keeping isUpgrade from the controller code since we need it to detect
whether an orchestration upgrade should be triggered or not (based on
the ceph cluster status).
Also, we keep it on the child controllers so we don't go into an
orchestration phase if the cluster image hasn't changed. The child does
not need to be updated/go into its orchestration phase because the
cluster CR changed.
Closes: https://github.com/rook/rook/issues/4379
Signed-off-by: Sébastien Han <seb@redhat.com>
The host name of an OSD in the CRUSH map should be the real
host name for non-portable OSDs. It was incorrectly being set
to the PVC name. Now the non-portable OSDs based on PVCs will
corretly have the host name set to the node name.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The minio operator has not had community support nor
any updates since being added to Rook. Support is being
removed from Rook due to this lack of community interest.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
A new CRD option `continueUpgradeAfterChecksEvenIfNotHealthy` is added.
When upgrading, Rook goes OSD by OSD and then waits for PGs to be clean
before proceeding to the next OSD. Currently, Rook waits for 5 hours but
there might be circumstances where PGs need more time to settle.
Thus setting `continueUpgradeAfterChecksEvenIfNotHealthy` to true will
pursue the upgrade process, even if PGs are not 100% active+clean.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1786029
Signed-off-by: Sébastien Han <seb@redhat.com>
Add support for the k8s 1.17 official zone/region failure domain labels.
Our earlier guess that the official labels would be
<failure-domain.kubernetes.io> was wrong; the official is now
<topology.kubernetes.io>.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
The operator kit had more utility originally when the operator
was creating and managing the TPRs and CRDs directly. Since
the CRDs are now created from a manifest and no longer by the
operators, the utility of operator kit is limited to the
controller watcher. Since we are moving to the controller runtime
we simplify the code to make the transition smoother. Now
there is only a simple WatchCR method that will need to be
replaced as we maek that transition.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit adds status field for ceph related CRs which will be useful for knowing the ceph component status without checking the logs.
Signed-off-by: Ashish Ranjan <ashishranjan738@gmail.com>
Reduce from 5 minutes to less than 50 seconds the time needed to restart a
mgr and osds(PVCs based),rgw,mds,rbd,nfs and toolbox pod that was running
in a k8s "NotReady" Node.
A new Rook Operator setting has been added to allow the user to set the
time used in pod's toleration <node.kubernetes.io/unreachable>:
ROOK_UNREACHABLE_NODE_TOLERATION_SECONDS = <5>
New setting added in release notes
Addressed @travisn,@leseb, and @blaineEXE suggestions
Signed-off-by: Juan Miguel Olmo Martínez <jolmomar@redhat.com>
An owner reference cannot be set with BlockOwnerDeletion: true
if the operator does not have privs to add a finalizer to the parent.
The discover resources don't need to block deletion based on the
parent so we remove that property from the owner reference.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
subhamkrai
Ahmad Nurus S
Sébastien Han
Travis Nielsen
Madhu Rajanna
Umanga Chapagain
moricho
Nizamudeen
Alexander Trost
crombus
n.fraison
Blaine Gardner
Ashish Ranjan
Juan Miguel Olmo Martínez