A user with unbalanced system (e.g., some OSDs use a partition which
resides on a device along-side OS partition) may want to have a
fine-grained control on the overall load of specific OSD. While osd
weight affects write-load, primary-affinity affects read-load.
This patch allow user to define osd's primary-affinity (similar to
'DeviceClass' and 'InitialWeight'), which is sent to the osd (via mon)
as part of deployment sequence, using 'ceph osd primary-affinity' command.
Valid values are within the range [0.0, 1.0). If not set, default value
is 1.
ROOK issue: https://github.com/rook/rook/issues/7773
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
The unit test TestConfigureCVDevices was failing intermittently
due to comparing the first element of the slice of two elements.
The slice ordering is not guaranteed, which caused a failure
intermittently. The test only compares the critical values in the test
and no need to check elements of the slice.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The deviceClass was only being set for LVM mode OSDs and was
missed for the raw mode for non-PVC. Now the deviceClass will be set
for all expected scenarios.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
currently, recreating erasure codedpPool with
different Settings show error and creation
failed.
Adding `--force` to the erasure coded profile
command works file with above condition.
Signed-off-by: subhamkrai <srai@redhat.com>
The ValidateConnectionDetails() contains `clusterSpec` assuming `SecuritySpec` only
part to `cephCluster` CRD. But we may need to validate same for `SecuritySpec` in
`cephObjectStore` CRD. Hence modifying the signature of the api.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
OSDs not automatically started when adding nodes to existing cluster.
Call the helper NormalizeCrushName(name) to make sure the node name can match the name in the crush map before querying for the node in the crush map, and reconcile when new nodes get added.
Closes: https://github.com/rook/rook/issues/7462
Signed-off-by: parth-gr <partharora1010@gmail.com>
This fixes cases where raw provisioning mode still cannot be used for
Rook v1.6 and Ceph Pacific clusters where json.Unmarshal fails to read
the ceph-volume output after OSD provisioning.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Ceph support the option '--osd-crush-initial-weight' upon OSD start,
which sets an explicit weight (in TiB units) to specific OSD. Allow
passing this option all the way from the user (similar to
'DeviceClass'), for the special case where end users wants it cluster
to have non-even balance over specific OSDs (e.g., one of the OSDs is
placed over a partition alongside OS-partition).
ROOK issue: https://github.com/rook/rook/issues/7448
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
This mops up the last of the multiple-imports within ceph-related
packages, in pkg/daemon/ceph/agent/flexvolume/manager/ceph and
pkg/daemon/ceph/osd.
Signed-off-by: Lars Lehtonen <lars.lehtonen@gmail.com>
`ceph osd purge` should remove the OSD auth, but many users have issues
where they are unable to create new OSDs after removing old ones due to
the old OSD auth still being present. Therefore, run `ceph auth del` for
the OSD after purging to fix this.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Update OSDs in parallel per the design in
design/ceph/update-osds-in-parallel.md
The max number of OSDs updated in parallel is currently fixed at 20.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
When the cluster is growing, the operator always processes all OSDs and
re-generate their Deployment spec. The generated environment variables
for encryption are coming from a map, which by design is unordered. So
once generated the deployment will see their spec change since the
environment variable position will change.
See from the following diff:
```
env: env:
- name: KMS_SERVICE_NAME <
value: vault <
- name: VAULT_NAMESPACE <
value: ocsns <
- name: VAULT_TLS_SERVER_NAME <
- name: VAULT_BACKEND_PATH <
value: n_ocs <
- name: VAULT_ADDR - name: VAULT_ADDR
value: https://vault.qe.rh-ocs.com:8200 value: https://vault.qe.rh-ocs.com:8200
> - name: VAULT_BACKEND_PATH
> value: n_ocs
> - name: VAULT_TLS_SERVER_NAME
- name: KMS_PROVIDER - name: KMS_PROVIDER
value: vault value: vault
> - name: KMS_SERVICE_NAME
> value: vault
> - name: VAULT_NAMESPACE
> value: ocsns
- name: VAULT_TOKEN - name: VAULT_TOKEN
valueFrom: valueFrom:
secretKeyRef: secretKeyRef:
key: token key: token
name: ocs-kms-token name: ocs-kms-token
```
Signed-off-by: Sébastien Han <seb@redhat.com>
The integration tests have long been painful to maintain with
settings in various places and copied to multiple types,
inconsistent variable names, and otherwise difficult to maintain
code. Now the settings for a test suite are all in one place and
they remain in the same settings type throughout the test.
The multi-cluster suite is also refactored to use the same install
and uninstall helpers as the other suites.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
It's better to validate ownerReferences when setting them. In addition, we should use
controllerrutil.Set{Controller,Owner}Reference, that have such validation, as possible.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Finally! We can now stop editing manually our crds definition. Simply
run `make crds-gen`. These two files:
* `cluster/examples/kubernetes/ceph/crds.yaml`
* `cluster/charts/rook-ceph/templates/resources.yaml`
will be autogenerated for us.
We rely on the controller-gen tool, it reads our API definitions from
`pkg/apis/` and produces the CRD files accordingly.
It uses "markers" to add extra yaml fields to the CRD, for instance we
have a lot fields with:
```
nullable: true
x-kubernetes-preserve-unknown-fields: true
```
The corresponding API type markers are:
```
// +kubebuilder:pruning:PreserveUnknownFields
// +nullable
```
For more API convention see
https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#optional-vs-required
and for the markers see: https://book.kubebuilder.io/reference/markers/crd-validation.html
Signed-off-by: Sébastien Han <seb@redhat.com>
This is a follow up to:
https://github.com/rook/rook/pull/7264
which added pool quotas. It was stated that it would be nice to
be able to set pool max_bytes quotas using standard k8s quantity
formats rather than an integer representing the number of bytes.
I was too busy at the time to make the changes. This PR adds the
functionality.
Signed-off-by: Frank Ritchie <12985912+fritchie@users.noreply.github.com>
In Pacific the simple command to retrieve the active mgr is with
ceph mgr stat instead of retrieving the full ceph mgr dump.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The mgr daemon may be failed over by ceph if the active mgr is not
responding and the standby mgr is available. If the active mgr changes
the services for the dashboard and metrics will be updated with a
label selector for the new active mgr. The services cannot direct
traffic to the standby mgr or else they will be incorrectly redirected
to the active mgr.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The active mgr should match the labels on the services that
are available for prometheus and the dashboard. The selector
labels must be updated whenever there is a new active mgr.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When c-v runs after the end of the prepare sequence, it will look for
lvm and raw-based OSDs. The raw mode detects LVM OSDs so we must trim
the list of OSD, only to report the LVM ones if their ID exists.
Closes: https://github.com/rook/rook/issues/7359
Signed-off-by: Sébastien Han <seb@redhat.com>
For simple OSD scenario that don't require the following:
* an encrypted osd
* an osd with a backing device
* multiple osd on the same block device
The OSD will be prepared using the ceph-volume raw mode which does
not use LVM on non-pvc case.
Closes: https://github.com/rook/rook/issues/4768
Signed-off-by: Sébastien Han <seb@redhat.com>
block if not defined was used with osdInfo.Device so not empty anymore
in the loop, which means it will have the same value for all OSDs in the
loop.
This is only called when running on PVC, where a single device is
present so the loop has a single iteration, so not a big issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
The upcoming Rook release 1.6 will support Ceph Pacific which introduces
stable support for multiple Ceph Filesystems in the same cluster. So we
now allow the creation of multiple Filesystem if the release is Pacific.
Also, we remove the Operator config flag which was not necessary.
Here I have 2 filesystems:
```
[root@rook-ceph-tools-6b4889fdfd-vncck /]# ceph fs ls
name: myfs, metadata pool: myfs-metadata, data pools: [myfs-data0 ]
name: myfs2, metadata pool: myfs2-metadata, data pools: [myfs2-data0 ]
```
```
cluster:
id: cc747950-589a-4862-bad2-ff7de1217b1a
health: HEALTH_WARN
mons a,b,c are low on available space
6 pool(s) have no replicas configured
services:
mon: 3 daemons, quorum a,b,c (age 2d)
mgr: a(active, since 2d)
mds: myfs:1 myfs2:1 {myfs2:0=myfs2-b=up:active,myfs:0=myfs-b=up:active} 2 up:standby-replay
osd: 3 osds: 3 up (since 2m), 3 in (since 6d)
data:
pools: 6 pools, 717 pgs
objects: 44 objects, 4.2 KiB
usage: 46 MiB used, 90 GiB / 90 GiB avail
pgs: 717 active+clean
io:
client: 1.8 KiB/s rd, 4 op/s rd, 0 op/s wr
progress:
Global Recovery Event (45s)
[===========================.]
```
Signed-off-by: Sébastien Han <seb@redhat.com>
The vault env variable VAULT_BACKEND is read by the secret library so we
must not change it. This is reverting
ee6a03dfb8 with a few extra fixes for the
rgw code.
Signed-off-by: Sébastien Han <seb@redhat.com>
Remove features and design that supports adding OSDs to Ceph clusters
via `spec:driveGroups`. Update the Ceph upgrade doc that informs users
who currently use Drive Groups (we believe there are none of these
users) how to migrate to using the `spec:storage` config.
Resolves https://github.com/rook/rook/issues/7275
Revert "ceph: fix drive group deployment failure"
This reverts commit 76f1d9944e.
Revert "ceph: osd: add drive groups spec to cluster CR"
This reverts commit 7117fc12b7.
Revert "design: ceph orchestrator module add/remove OSDs"
This reverts commit 178187d035.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Shachar Sharon
Travis Nielsen
subhamkrai
shenjiatong
Jiffin Tony Thottan
Satoru Takeuchi
parth-gr
Sébastien Han
Blaine Gardner
Lars Lehtonen
Blaine Gardner
Frank Ritchie