Allow force creation of OSD on a device previously configured in a different ceph cluster.
The OSD prepare pod job will zap the OSD disk using ceph-volume lvm zap
if that disk has metadata from a different ceph cluster.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Implements #14733. Allows to set IDs of external mons to
Cluster CRD. Rook will not remove external mons from quorum
and will add external mon addresses to mon endpoints.
Use-case for external mon is to maintain quorum for 2-AZ
k8s cluster in case of zone outage.
Signed-off-by: Artem Torubarov <artem.torubarov@clyso.com>
This is similar to #14052 we did for radosnamespace
and this is an extension to support cleanup
at the blockpool level to cleanup the images
and the snapshots in a pool.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
fix UpdateActiveMgrLabel to retry label update on failure. Previously,
the function always returned the current manager, even if update
failed, leading to inconsistent labels. This fix ensures retries on
failures.
Fixes: https://github.com/rook/rook/issues/13601
Signed-off-by: Redouane Kachach <rkachach@ibm.com>
Cleanup the resources created by subvolumegroup
when its deleted. Following resources will be cleaned up:
- OMAP value
- OMAP keys
- Clones
- Snapshots
- Subvolumes
Signed-off-by: sp98 <sapillai@redhat.com>
create the ceph config and keyring file in the osd prepare pod
before starting the OSD migration. These files are needed to
run any ceph command.
Signed-off-by: sp98 <sapillai@redhat.com>
Adding callback function in the osd removal method
as in downstream there is requirement of adding extra
check before proceeding with osd removal.
Signed-off-by: subhamkrai <srai@redhat.com>
If osd store is updated in the ceph cluster, then
delete OSDs one by one, cleanup disks and provision a new OSD on
the same disk
Signed-off-by: sp98 <sapillai@redhat.com>
The function ParseMonEndpoints existed twice, once in the mon package
and once in the controller package. It has now been deleted from the
mon package. Usages in the mon package now reference the function
in the controller package.
Signed-off-by: Henry Davies <henrydavies@hotmail.co.uk>
Add a more involved multus validation test to the Rook binary. Because
this is intended to be end-user runnable, make sure operator-only
commands are hidden.
Build this into the rook binary instead of creating a separate binary
for ease, and because any binary built with the kube api becomes 40+
megabytes. We save quite a bit of space by including this in the Rook
binary, which is good for keeping container layers as small as possible.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
this feature is to allow the use of filters using the deviceFilter flag
by skipping devices that do not match the filter
Closes: #10340
Signed-off-by: Javier <sjavierlopez@gmail.com>
With the new mgr HA implementation (based on readiness probe) we
don't need the mgr sidecar (live-watch) anymore. This commit is
intended to remove all the related code.
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
few functions got change as they were deprecated
for ex: ioutil.Readfile change to os.Readfile
ioutil.TempFile change to os.CreateTemp
And fixed golang-ci-lint-issues
Signed-off-by: parth-gr <paarora@redhat.com>
Environment variables are not recommended for secrets in pods since
they can be easily leaked if the environemnt variables are logged.
By mounting the mon secret as a file, the mgr and osd prepare pods
can read the mon secret from a file for better security.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The fsid, username, and user secrets were from legacy and no
longer needed on the osd daemon or mon pods. This removes the
unnecessary env vars from the pod specs.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit adds context parameter to k8sutil kvstore functions. By
this, we can handle cancellation during API call of kvstore resource.
Signed-off-by: Yuichiro Ueno <y1r.ueno@gmail.com>
If multiple removal jobs are fired in parallel, there is a risk of
losing data since we will forcefully remove the OSD. It's also simply
true if a single OSD is not safe to destroy, there is also a risk of
data loss.
So now, we check if the OSD is safe-to-destroy first and then proceed.
The code waits forever and retries every minute unless the
--force-osd-removal flag is passed.
Signed-off-by: Sébastien Han <seb@redhat.com>
The cluster info is important context for the cluster controller to
create the cluster, and all the fields must be properly set.
A test cluster name was being set temporarily, resulting in
mons incorrectly getting the wrong cluster CR name. There is no
known issue from the temporary value, it was just exposed by
https://github.com/rook/rook/pull/8678 setting the value to a label.
Now the functions are more clearly named so only unit and
integration tests should be using the test value for the cluster
name where it is not important.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit adds context parameter to k8sutil node functions. By this,
we can handle cancellation during API call of node resource.
Signed-off-by: Yuichiro Ueno <y1r.ueno@gmail.com>
rook command doesn't interpret `logtostderr` option. It's OK to just
remove this option because `capnslog` outputs all logs to stdout
by default. It's better to keep `AddGoFlagSet()` call because
some libraries might define their own flags with Go's `flag` package.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
This commit adds context parameter to k8sutil pod functions. By this, we
can handle cancellation during API call of pod resource.
Signed-off-by: Yuichiro Ueno <y1r.ueno@gmail.com>
The rook-ceph-purge-osd job should be run for a particular CephCluster
and should therefore be namespaced to the cluster.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The flex driver has been fully deprecated and thus removed from Rook.
Before upgrading to v1.8, users will need to convert existing flex volumes
from flex to csi volumes.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit is a large refactor on how the operator starts, stops and
how it starts various sub-components such as the ceph-csi driver. It
also refines the way we cancel orchestrations. We don't use breakpoints
anymore but send our self a SIGUP to reload our controller runtime
manager.
The reload will happen under different circonstances like:
* a new adminission controller secret is created/deleted/changed
* a CephCluster CR is edited
As mentioned earlier, the csi driver now has its own controller, just
like flex. It reacts to change in the operator config map for particular
ROOK_CSI_ fields.
A second new controller for the operator's general config has been
created, it manages:
* the logging level
* the ceph CLI command timeout
* the discovery daemon
The operator reacts much more rapidly to cancellation events by stopping
the manager's context and reloading it.
Signed-off-by: Sébastien Han <seb@redhat.com>
The error message in UpdateNodeStatus regards the second argument
as node name. However, it is a PVC name in OSD on PVC.
Signed-off-by: Hiroya Onoe <onoehiroya@gmail.com>
Our admission webhooks will now run as part of the Operator container
and not an additional deployment. This has the advantage of consuming
fewer resources in the cluster and not having to manage affinities and
tolerations. This only drawback is that the Secret containing the
certificates is not mounted anymore and the content needs to be written
inside the Operator. This is not practical since we also need to watch
for the Secret content to change. Meaning that the certificates have
been renewed and the webhook server needs to use them.
A new approach is on its way to hopefully simplify this last issue and
implement a watcher for the Secret.
In the meantime, users need to use the cert-manager or renew
certificates manually. Additionally, they must update the
ValidatingWebhookConfiguration object with the new CA bundle.
Signed-off-by: Sébastien Han <seb@redhat.com>
Thanks to Golang 1.16, we can now embed files in the Go binary. This
means we don't need to add the CSI templates files to the container
image. They are added in the Go binary at build time.
The existing location of the template must be in the package calling it.
So they moved to pkg/operator/ceph/csi/template. All the files have been
symlinked back to cluster/examples/kubernetes/ceph/csi/template.
Closes: https://github.com/rook/rook/issues/7609
Signed-off-by: Sébastien Han <seb@redhat.com>
I don't know why these flags are there but it's not like we run the
operator with them and with a different value.
So removing for clarity.
Signed-off-by: Sébastien Han <seb@redhat.com>
When there are multiple mgr daemons, the mgr sidecar owns reconciling
the services for the active mgr. However, for efficiency the sidecar
only reconciles the services if the active mgr changes. Now the operator
will also reconcile the mgr services to ensure that services are re-created
after being deleted, or otherwise in an incorrect state.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Santosh Pillai
Joshua Hoblitt
Artem Torubarov
Madhu Rajanna
Redouane Kachach
subhamkrai
guoguangwu
Travis Nielsen
Henry Davies
Blaine Gardner
Javier
Redouane Kachach
parth-gr
Divyansh Kamboj
Sébastien Han
Yuichiro Ueno
Satoru Takeuchi
Hiroya Onoe