Rook cluster-wide encryption can now use the native Kubernetes
authentication to interact with vault KMS instead of using the token
method.
Signed-off-by: Sébastien Han <seb@redhat.com>
When deploying a cluster-wde encrypted cluster we now use the rook
binary to execute some code to fetch the key encryption key.
Using cURL all the time to fetch the key has its limitations. The
incoming integration with Kubernetes Authentication through service
accounts is leading the usage of cURL to its end.
The logic is really complex and prone to errors. Re-implementing the
Go logic into Bash is not a viable option.
Also, using the lib in a binary allows us to keep a consistent behavior
throughout the life cycle of our code.
Signed-off-by: Sébastien Han <seb@redhat.com>
Previously we were merging the stderr even if it was empty, leading to
unmarshall errors.
The error simulation was done here
https://play.golang.org/p/Sk2yw9GUWNu.
Signed-off-by: Sébastien Han <seb@redhat.com>
Prior to ceph v16.2.7 the failover of the arbiter mon was
not supported. Now the new tiebreaker mon can be set during
the failover event and provide more dynamic stability to
the mon quorum if another node is available in the arbiter
zone.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When TLS is used and includes a caert, client key/cert, we need to copy
the content of the secret to a file in the operator's container
filesystem so that we can build the TLS config and thus the HTTP Client,
which reads those files.
Also, removing the files after each API call so they don't persist on
the filesystem forever.
Signed-off-by: Sébastien Han <seb@redhat.com>
Using a default value for CompressionMode to none effectively overrides
any values for Parameters. It is deprecated but still takes precedence.
Which means that in its previous form, Parameters was always ignored
since CompressionMode was always set to none when empty.
Signed-off-by: Sébastien Han <seb@redhat.com>
Create a new log level for Rook that is hidden from users. This is the
most verbose log level, and it is the level developers would like to use
to get debug logs that are important for debugging but that could leak
senstivie information like credentials in production use.
If a user sets their debug level to "TRACE", they will merely get
"DEBUG" level logs. Only if they set "TRACE_INSECURE" will they get
trace logs, and those are likely to include insecure information. Rook
tries very hard not to leak sensitive information in logs even with
verbose "DEBUG" logs.
Resolves#8778
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Prior, we were returning a nil map and thus the assignment for forced
deletion was not working since we were trying to assign on a nil map.
Signed-off-by: Sébastien Han <seb@redhat.com>
When proxying commands to the cmd-proxy container we don't need to build
the command line with the same flags as the operator. The cmd-proxy
container does not use any ceph config file and just relies on the
CEPH_ARGS environment variable in the container. So passing the same
args as the operator causes to fail since we don't have a ceph config
file in `/var/lib/rook/openshift-storage/openshift-storage.config` thus
the remote exec fails with:
```
global_init: unable to open config file from search list ...
```
Signed-off-by: Sébastien Han <seb@redhat.com>
We don't need to use tini.
We don't have anything in the rook operator that would
either create zombie processes (no threads) or use
exec (to fork). The Go binary has a really good
signal handling mechanism.
Closes: https://github.com/rook/rook/issues/8794
Signed-off-by: Sébastien Han <seb@redhat.com>
The flex driver has been fully deprecated and thus removed from Rook.
Before upgrading to v1.8, users will need to convert existing flex volumes
from flex to csi volumes.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit is a large refactor on how the operator starts, stops and
how it starts various sub-components such as the ceph-csi driver. It
also refines the way we cancel orchestrations. We don't use breakpoints
anymore but send our self a SIGUP to reload our controller runtime
manager.
The reload will happen under different circonstances like:
* a new adminission controller secret is created/deleted/changed
* a CephCluster CR is edited
As mentioned earlier, the csi driver now has its own controller, just
like flex. It reacts to change in the operator config map for particular
ROOK_CSI_ fields.
A second new controller for the operator's general config has been
created, it manages:
* the logging level
* the ceph CLI command timeout
* the discovery daemon
The operator reacts much more rapidly to cancellation events by stopping
the manager's context and reloading it.
Signed-off-by: Sébastien Han <seb@redhat.com>
The error message in UpdateNodeStatus regards the second argument
as node name. However, it is a PVC name in OSD on PVC.
Signed-off-by: Hiroya Onoe <onoehiroya@gmail.com>
During disaster recovery/migration of a cluster, as part of the failover, the
kubernetes artifacts like deployment, PVC, PV, etc will be restored to a new
cluster by the admin. Even if the kubernetes objects are restored the
corresponding RBD/CephFS subvolume cannot be retrieved during CSI operations as
the clusterID and poolID are not the same in both clusters
This PR creates a mapping between Cluster ID and RBD Pool ID between
local cluster and peer cluster.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Passing struct by value essentially gives you a copy, so when modified
within a function, the scope is then reduced to that function. Using
pointers solves that you mutate the struct as many times as you want from
anywhere.
As a result, the auto-detection of the Vault KV backend was not working
correctly.
Also, added a ton of unit tests for Vault.
Signed-off-by: Sébastien Han <seb@redhat.com>
This handles the scenario where the OSDs have been created but not yet
started due to a wrong CR configuration.
For instance, when OSDs are encrypted and Vault is used to store
encryption keys, if the KV version is incorrect during the cluster
initialization the OSDs will fail to start and stay in CLBO until the
CR is updated again with the correct KV version so that it can start.
For this scenario, if the CRUSH map has no host registered yet it's fair
to assume the initialization broke and we need to fix it. So when don't
need to call ok-to-stop since it will always fail and eventually force
pass but let's not wait for nothing.
Signed-off-by: Sébastien Han <seb@redhat.com>
The mon config had two different implementations that have evolved
over the lifetime of the project. This is a simple refactor to remove
the SetConfig() option and stick with the MonStore as a single
implementation for updating the mon store.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Trying to disable mirroring on a cluster where mirroring is not enabled
results in an error during upgrades. Let's catch this error and ignore
it.
Funny enough the exec error resembles to:
```
Error ENOTSUP: Module 'mirroring' is not enabled (required by command 'fs snapshot mirror disable'): use `ceph mgr module enable mirroring` to enable it: exit status 95
```
So we get ENOTSUP which is 45 but exit status 95...
Closes: https://github.com/rook/rook/issues/8438
Signed-off-by: Sébastien Han <seb@redhat.com>
They are scenarios where the mirroring information want to be shared
between clusters prior to creating pool. Because the bootstrap peer
import command needs a pool name to operate this is not suitable. So
additionally now each time the cluster is reconciled and on any new
clusters a new secret will be created that contains a boostrap peer
token. It can be exchanged with another cluster.
Signed-off-by: Sébastien Han <seb@redhat.com>
Rook will now auto detect the kv version of the vault server. This
allows users not having to pass the VAULT_BACKEND configuration in the
CephCluster CR.
Signed-off-by: Sébastien Han <seb@redhat.com>
References to luminous and mimic, and unnecessary references to nautilus
were found in the docs that have been cleaned up and clarified. At the same
time, the tests are updated to use more recent versions.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Instead of having the RBDMirroringPeerSpec in the RBDMirror CRD we want
to move it on the CephBlockPool CRD so that each pool can have its own peer.
This enables pool to re-use an existing peer secret if it points to the
same cluster peer.So we don't need to duplicate secret peer anymore.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Sometimes the default 15s is not enough for timeout of ceph commands. For examples,
I encountered that `radosgw-admin` command took dozens of seconds under heavy load.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Both `ExecuteCommandWithOutputFileTimeout()` and
`ExecuteCommandWithOutputFile()` generate unnecessary system calls by
creating/reading/removing files where the stream output of the command
can simply be used. So sticking with `ExecuteCommandWithOutput()` and
`ExecuteCommandWithCombinedOutput()` for reading outputs is sufficient.
Closes: https://github.com/rook/rook/issues/8343
Signed-off-by: Sébastien Han <seb@redhat.com>
Even if we can use raw mode, do NOT use raw mode on disks. Ceph bluestore disks can
sometimes appear as though they have "phantom" Atari (AHDI) partitions created on them
when they don't in reality. This is due to a series of bugs in the Linux kernel when it
is built with Atari support enabled. This behavior does not appear for raw mode OSDs on
partitions, and we need the raw mode to create partition-based OSDs. We cannot merely
skip creating OSDs on "phantom" partitions due to a bug in `ceph-volume raw inventory`
which reports only the phantom partitions (and malformed OSD info) when they exist and
ignores the original (correct) OSDs created on the raw disk.
Resolves https://github.com/rook/rook/issues/7940
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Multiple filesystems are supported as of the Ceph Pacific release. So we
remove the flag from the operator configuration and just have a ceph
version check instead.
The Operator configuration option `ROOK_ALLOW_MULTIPLE_FILESYSTEMS`
has been removed in favor of simply verifying the Ceph version is
at least Pacific.
Multiple filesystems are stable since Ceph Pacific.
So users who had `ROOK_ALLOW_MULTIPLE_FILESYSTEMS` enabled will
need to update their Ceph version to Pacific.
Closes: https://github.com/rook/rook/issues/7183
Signed-off-by: Sébastien Han <seb@redhat.com>
We now pass the networking spec to the clusterInfo so that the executor
can make the right decision on how to execute a command.
This is a small change that allows us to remove the CephBlockPool CR
since it's checking for rbd images. On a Multus deployment, the operator
does not have the network annotations, thus has no access to the OSD
network then rbd commands are hanging forever.
Signed-off-by: Sébastien Han <seb@redhat.com>
The mon daemon in a stretch cluster now can have its location set
as a CLI param instead of setting it with a separate command.
This enables mon failover to set the location of a mon immediately
when it is joining quorum instead of having a delayed command
to set the location.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Sébastien Han
subhamkrai
Travis Nielsen
Blaine Gardner
Jonas Zeiger
Hiroya Onoe
Santosh Pillai
parth-gr
Satoru Takeuchi