Cleanup up overall usage of CephX statuses in CephCluster.
Convert all CephX statuses to non-pointer types. There is no specific
need for pointer types, and keeping these as non-pointers means there is
not a risk of nil pointer exceptions in all the various Rook controllers
for upgraded clusters.
Move initialization of CephCluster CephX status items to
`preMonStartupActions()`. This helps resolve 2 issues:
1. 'Uninitialized' state was being set for external CephClusters where
CephX statuses are not relevant.
2. 'Uninitialized' state was being set for upgraded clusters whose key
status cannot be determined.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
This change cleans up and standardizes import statements across the Ceph operator code. It removes redundant or duplicate imports and reorganizes alias names for improved clarity and consistency. Additionally, the ST1019 exception was removed from .golangci.yaml now that the code complies with the rule.
Signed-off-by: Carlos Barria <cbarria@yahoo.com>
Adds .spec.cephConfigFromSecret to CephCluster for loading
Ceph config parameters from a Kubernetes Secret.
Signed-off-by: Patryk Rostkowski <patrostkowski@gmail.com>
When the clusters reach full, nearfull, or backfill full thresholds
ceph will raise health warnings and stop allowing IO or backfill
depending on the threshold. These settings require special ceph
commands instead of being generic ceph config. Allow these settings
to be set from the CephCluster CR in the spec.storage
section.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Unset encryption configuration and default
rbd map option when the encryption is not
enabled or it disabled after sometime.
Unset compression option also when the compression
is disabled.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
this commit uses the ceph feature assimilate-conf to set
multiple configurations for ceph global/pods at one file and
use that in command to set the required configuration in one
line command.
for example:
`ceph config assimilate-conf -i <input file> -o <output file>`
Signed-off-by: subhamkrai <srai@redhat.com>
For the ceph telemetry report the csi version, k8s version,
and metrics from the desired state in the cephcluster CR such
as mon count, stretch cluster, number of device sets, and
so on.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This removes double package imports. Example:
```
"github.com/rook/rook/pkg/apis/ceph.rook.io/v1"
cephv1 "github.com/rook/rook/pkg/apis/ceph.rook.io/v1"
```
Only one is now being used as shown in go-staticcheck ST1019
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
msgr2 allows for encryption and/or compression across the wire.
Settings for enabling the encryption and compression are now
available in the cluster CR to that ceph will be automatically
configured with these settings when desired.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The mons need to be configured to skip the mds sanity check
during upgrade to 16.2.7 or the mons may crash during that
upgrade.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The cluster info is important context for the cluster controller to
create the cluster, and all the fields must be properly set.
A test cluster name was being set temporarily, resulting in
mons incorrectly getting the wrong cluster CR name. There is no
known issue from the temporary value, it was just exposed by
https://github.com/rook/rook/pull/8678 setting the value to a label.
Now the functions are more clearly named so only unit and
integration tests should be using the test value for the cluster
name where it is not important.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit is a large refactor on how the operator starts, stops and
how it starts various sub-components such as the ceph-csi driver. It
also refines the way we cancel orchestrations. We don't use breakpoints
anymore but send our self a SIGUP to reload our controller runtime
manager.
The reload will happen under different circonstances like:
* a new adminission controller secret is created/deleted/changed
* a CephCluster CR is edited
As mentioned earlier, the csi driver now has its own controller, just
like flex. It reacts to change in the operator config map for particular
ROOK_CSI_ fields.
A second new controller for the operator's general config has been
created, it manages:
* the logging level
* the ceph CLI command timeout
* the discovery daemon
The operator reacts much more rapidly to cancellation events by stopping
the manager's context and reloading it.
Signed-off-by: Sébastien Han <seb@redhat.com>
While an even number of mons can cause lower availability of
mon quorum, it also can provide higher durability for the cluster.
Mon quorum can be restored from a single mon according to the
disaster recovery guide, so there may be scenarios where
an even number of mons may be preferable.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
In clusters where only two datacenters (or similar failure domains)
are available, a different mon and osd approach is needed to deal
with the network partitions or some other reason for one of the failure
domains going down. The Ceph stretched cluster makes the mons aware
of the failure domains by configuring one as the arbiter in a third
zone, while keeping two replicas of the data in each of the data
zoens.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This is the final conversion to controller-runtime conversion. This time the
CephCluster CRD has been converted to use the controller-runtime
library.
The controller incorporates all the previous watchers too, so the Node
and hot-plug configmap are been watched too.
Only the operator setting configmap is not being watcher since it's not
related to the CephCluster CRD.
Not only the patch converts to controller-runtime but also tries to
re-organize the tree of the repo to actually make the code more
readable and have better functions/methods/tests separations.
Closes: https://github.com/rook/rook/issues/4939
Signed-off-by: Sébastien Han <seb@redhat.com>
This commit is to handle all those unhandled errors which raises the gosec warning.
Fixed G104: Unhandled Errors are handled now
Signed-off-by: Nizamudeen <nia@redhat.com>
The isUpgrade flag was being set every time the operator
was started. This caused the upgrade checks to be run every
time the operator restarted. Thus, if any mons were down,
you likely would get stuck on the upgrade checks since another
mon could not be stopped. We need to rely on the upgrade being
detected either by a different image name from the cluster CR
update, or from different versions of the daemons running
in case the operator was restarted in the middle of an upgrade.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We recently discovered a race condition which happens not to update the
child CRDs when CR image changes.
The race happens under the following sequence:
* orchestration onAdd() is called when the operator image restarts
or its image updated
* the orchestration then goes into processing mon/mgr/osd
* during this the cluster CR is updated so onUpdate() is called,
however, onAdd() is not done yet for child CRDs (mds, rgw)
* onUpdate() runs against the cluster CR and updates the cluster images
* by the time the child CRDs reached onUpdate() from their respective
ParentClusterChanged() methods, the image is already up to date
so we were exiting since our check for updating
these resources are based on the cluster image version
To fix this, we changed the comparison, but using isUpgrade instead and
slightly changed the way isUpgrade operates. So now, isUpgrade is true
even if the Ceph version is identical which allows us to verify whether
or not the image changed.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1775624
Signed-off-by: Sébastien Han <seb@redhat.com>
With the 1.1 release we should not be creating bluestore OSDs
with rook's legacy partitioning scheme. All new bluestore OSDs
should be created with ceph-volume. Therefore, the miminum
version allowed is a version of mimic supporting ceph-volume.
This commit also adds consistent version checking between
the Add and Update methods for the operator handling the
CR events.
Signed-off-by: travisn <tnielsen@redhat.com>
This commit makes OnAdd() and OnUpdate() consistent in behavior. They
will do their best detecting if we can upgrade, continue an upgrade or
refuse to do one. It also refuses to downgrade to any version.
It also load ClusterInfo earlier in the controller so that we can
compare the spec version versus the cluster running one.
Signed-off-by: Sébastien Han <seb@redhat.com>
Blaine Gardner
Carlos Barria
Patryk Rostkowski
Joshua Hoblitt
Travis Nielsen
parth-gr
Deepika Upadhyay
Thomas Way
Madhu Rajanna
subhamkrai
Alexander Trost
Sébastien Han
Nizamudeen