Previously, if the OSD cephx-keyring-update init container couldn't
contact the mons, the output redirect would overwrite the on-disk
keyring file with no text, removing the on-disk keyring.
Modify the init container to only overwrite the keyring file when the
ceph command to get the latest key suceeds, to avoid removing the
on-disk key.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
This fixes OSD info being incomplete when a sidecar container is first
in the .spec.Template.Spec.Containers list.
I added a small helper function to find a container named "osd" instead
of always assuming the first one.
Signed-off-by: Jan Breitkopf <jan.breitkopf@prorocketeers.com>
For Rook v1.19,removing support for Ceph Reef. It is at end of life.
Users on Reef can continue to use Rook v1.18.x or older.
The latest two Ceph versions Squid and Tentacle are supported.
Signed-off-by: subhamkrai <srai@redhat.com>
When writing to the operator log, where possible
the namespace of the resource on which the operator
is working will be logged as a standard prefix
to more easily troubleshoot what resource is being reconciled
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
In a running cluster, I noticed that a node which was provisioning was removed from k8s
and the following log was emitted by the rook operator:
```
op-osd: cleaning up dangling OSD prepare status configmap "rook-ceph-osd-xxx-status"
```
But the osd provisioning job was still trying to run on the removed node:
```
rook-ceph-osd-prepare-xxx Running 0/1 4d22h 4d22h
```
This PR implements a mechanism to remove any osd provision jobs which are bound to a
node which no longer exists within kubernetes. I added a test for this cleanup as
there wasn't a pre-existing test.
Signed-off-by: Elias Carter <elias@dropbox.com>
currently the device class label was added to the osd pod,
we need the device class label on prepare pod,
so to spread across prpeare pods evenly among the faiure domains
per device class
Signed-off-by: parth-gr <partharora1010@gmail.com>
`cluster.monitoringRoutines` stores three types of
daemon health: "mon", "osd", and "status". These are
used by three goroutines respectively, resulting in:
fatal error: concurrent map reads and map writes.
Signed-off-by: Yite Gu <guyite@bytedance.com>
The OSDs may require different resources based on their device
class. The overall osd resources were only being used, rather
than properly looking up the specific device class resources.
Now the expected resources will take affect per device class.
Co-authored-by: Matthias Osthues <osthues.matthias@gmail.com>
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When OSDs start, init containers attempt to get the latest CephX key for
the OSD to allow OSDs to potentially continue working after key rotation.
However, in Ceph corner cases, mons could be unavailable while OSDs
could still be viable with existing on-disk keys. Since key rotation is
a rare event, it's likely that the on-disk keys are still good.
The worst case scenario is that key updates were needed but didn't
succeed in init containers. In this case, instead of the init container
failing, the OSD startup will fail instead. Thus, this should introduce
no extra risk but merely shift the failure to a different container.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
if there a bit long to update osds in parallel,
we need to timeout and abort the synchronous loop
and start the cluster reconcile again from the beginning
Signed-off-by: parth-gr <partharora1010@gmail.com>
when the osd is created there is no need for
osd bootstrap keyring, so remove the keyring
and keyring file,
New keyring will be created if
new osd need to be provisoned
Signed-off-by: parth-gr <partharora1010@gmail.com>
ceph-volume creates osd-lockbox keys for the encryted osds. This PR
rotates those keys along with the OSD keys.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Cleanup up overall usage of CephX statuses in CephCluster.
Convert all CephX statuses to non-pointer types. There is no specific
need for pointer types, and keeping these as non-pointers means there is
not a risk of nil pointer exceptions in all the various Rook controllers
for upgraded clusters.
Move initialization of CephCluster CephX status items to
`preMonStartupActions()`. This helps resolve 2 issues:
1. 'Uninitialized' state was being set for external CephClusters where
CephX statuses are not relevant.
2. 'Uninitialized' state was being set for upgraded clusters whose key
status cannot be determined.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
add a validation check to fail osd deployment when topology labels
like rack or chassis are duplicated across parent domains
(e.g., zones). this prevents invalid crush map hierarchies
(dfbugs-2610).
Signed-off-by: Oded Viner <oviner@redhat.com>
Implement automated CephX key rotation for OSDs.
OSDs have marshalled CephX statuses applied as an annotation on the OSD
pod spec, which differs from other Rook Ceph daemons for a two reasons:
A large cluster could have hundreds or thousands of OSDs, so it is more
critical that Rook avoid rotating OSD keys more than once in the event a
CephCluster reconcile restarts partway through OSD creation/updation.
OSDs do not have their CephX keys stored in K8s Secrets, whose resource
version is used for enforcing the desired restart behavior other daemon
pods like RGWs.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Create a new OSD pod init container that loads the latest CephX key for
the OSD. The init container must be run after OSD activation, due to
keyfile reset behavior of ceph-bluestore-tool, used during activation.
The primary purpose of this work is to allow OSDs to start and run
correctly after key rotation, whether done manually by users or
automatically by future Rook work.
This work makes redundant prior code changes done in #14826. The CI test
added in the prior work is kept to ensure no regression.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
This is the first implementation of CephX key rotation in Rook.
Adds key rotation API from design PR 15915.
Also add helper methods for rotating keys, determining when keys
need to be rotated, and for generating CephX key statuses. These will be
reusable for other Rook reconciles beyond object/RGW.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Allow force creation of OSD on a device previously configured in a different ceph cluster.
The OSD prepare pod job will zap the OSD disk using ceph-volume lvm zap
if that disk has metadata from a different ceph cluster.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
this commit remove the code which sets the dmcrypt encryption
key from secret as environment variable in the prepare pod job
spec. Now, the env will be set under function `setKEKinEnv`, which
tries to reads secret from k8s first method `c.IsK8s()`under
`GetSecret` and then check for KMS to ready and apply env directly.
Signed-off-by: subhamkrai <srai@redhat.com>
This change cleans up and standardizes import statements across the Ceph operator code. It removes redundant or duplicate imports and reorganizes alias names for improved clarity and consistency. Additionally, the ST1019 exception was removed from .golangci.yaml now that the code complies with the rule.
Signed-off-by: Carlos Barria <cbarria@yahoo.com>
Refactored multiple conditional if-else blocks into switch statements to improve readability and maintainability. Also removed outdated staticcheck rule comments (QF1002, QF1003) from .golangci.yaml.
Signed-off-by: Carlos Barria <cbarria@yahoo.com>
Labels cannot be longer than 64 characters, and if the image name
is too long we log a verbose message about the label that we can
just log now as debug level.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
With a osd resize operation, currently pvc and pv may
takes more time then expected.
And so the osd dont get resized and need manual re-start
as currently we don't have a watch on osd's
controller that watches pv and get it resized.
add a wait time till pvc is not resized
Signed-off-by: parth-gr <partharora1010@gmail.com>
One ore more OSDs can be down and PGs can still be active+clean (data
was rebalanced to other available OSDs). This PR sets
maxunavailable=1+downOSDs to allow one healthy to be drained.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
If a locally mounted volume is blocked on reads because this OSD is
down, lvs will deadlock trying to read from it. To avoid this, tell LVM
to filter out RBD volumes from its scanning process.
Signed-off-by: Steven Fackler <sfackler@gmail.com>
Some ceph.conf settings need to be unique per node
depending on the hardware. The ceph.conf overrides
can now be customized per-node by creating a node-specific
configmap that will be loaded for all OSDs and OSD prepare
jobs on that node, instead of the default ceph.conf
that is loaded from the rook-config-override configmap.
The node-specific configmaps must have the label
node.config.rook.io/osd, and be named as:
rook-config-override-<hostname>
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Blaine Gardner
Jan Breitkopf
dependabot[bot]
subhamkrai
Travis Nielsen
Elias Carter
subham rai
huyejia
parth-gr
Yite Gu
Joshua Hoblitt
Oded Viner
Santosh Pillai
chentao.2022
Kyori Sakao
Carlos Barria
Artem Torubarov
Steven Fackler
Artem Torubarov