Update the base operator image and cluster examples to use the latest
octopus release v15.2.4. Also cleanup some old examples and unit tests
that were still based on mimic.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
remove csi drivers and delete k8s
services that drivers create,when
the default setting of drivers changed
to false.
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
We have introduced a new goroutine to check the state of the rgw
endpoint. It will run every minute and perform operations on a bucket.
The success or failure will be reported as part of the status field of
the CephObjectStore CR.
A good status will look like:
status:
endpointStatus:
lastChanged: "2020-06-25T13:47:45Z"
lastChecked: "2020-06-25T13:48:46Z"
phase: Connected
A failed status:
status:
endpointStatus:
details: |-
error creating bucket "rook-ceph-internal-s3-bucket-checker": RequestError: send request failed
caused by: Put http://rook-ceph-rgw-my-store.rook-ceph:8080/rook-ceph-internal-s3-bucket-checker: dial tcp 10.108.189.148:8080: connect: connection refused
health: ERROR
This check works for both converged and external modes. Note that the
CephObjectStore CRD has a new field called "externalRgwEndpoints" which
allows you to define a list of IP addresses pointing to rgws.
Closes: https://github.com/rook/rook/issues/5692
Signed-off-by: Sébastien Han <seb@redhat.com>
removed CSI_ENABLE_SNAPSHOTTER from the configuration
to enable or disable csi-snapshotter as snapshot
is moved to beta and enabled by default in kubernetes
1.17+
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
as we need kubernetes v1.17+ for snapshotter
to work,Added code changes to disable snapshotter
sidecar deployment by default if the kubernetes version
is less than v1.17+
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
updated snapshotter from v1.x to v2.x
as its supports snapshot beta, the required
provisioner version to support snapshot beta
is v1.5.x+.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The stuck mons were only being force deleted in the mon health checker.
After an operator restart, the health check may not be executed
for 20 minutes until after the timeout during the main reconcile
which is holding onto a lock for mon reconcile. Now the stuck mon
will be deleted during the reconcile as well.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
If the mon is backed by a pvc, ensure the pvc is deleted when
the mon is failed over. The pvc is being left in a bound state
even though it will no longer be used in the cluster.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
During mon failover if the mon fails to be removed, the new mon
config was not being saved. The mon removal anyway is not retried
if it fails, so it should make a best effort to remove all the
resources related to the mon, and then always update the mon
config after the failover.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
adds deploy.sh script to deploy validatingwebhookconfiguration and create secrets.
adds new command ceph admission-controller to start webhook servers.
adds validation for various rook custom resources
Signed-off-by: Vineet Badrinath <vbadrina@redhat.com>
Fix the following bugs.
- CephVersion is not back to Octopus
- `cephadm' here is called with three arguments,
"info --query=property <devname>". We should use 'args[2]' instead.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
This commit fixes an argument of the CreateCrashCollectorSecret function as
it is expected to be the namespace of the cluster.
Signed-off-by: binoue <banji-inoue@cybozu.co.jp>
When the operator loads the mons and checks for a valid maxMonId
the check of the id against the currently running mons was outdated
from legacy mon ids. The check now has to parse the new id which is
just the letter instead of having a number from legacy mon ids.
Without this fix, the maxMonId would stay incorrect if it was somehow
corrupted.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
radosgw-admin as of Octopus uses a different time format, it uses
"2006-01-02T15:04:05.999999999Z". It's close from RFC3339 but not quite
the same. This change is needed in order for the operator image (with a
Ceph Octopus based image) to perform radosgw-admin call correctly.
Signed-off-by: Sébastien Han <seb@redhat.com>
We can now explicitly set any property on a given pool by using the new
Property field in the CephBlockPool Spec.
Also, this fixes the case where both `CephBlockPool` and `CephCluster`
are created at the same time. When Rook creates the pool, the cluster is
still being bootstrapped and the global option
`osd_pool_default_pg_autoscale_mode` has not bee set yet. So the pool
gets created but its `pg_autoscale_mode` property is set to `warn`
instead of `on`.
Closes: https://github.com/rook/rook/issues/5608V
Signed-off-by: Sébastien Han <seb@redhat.com>
Fix the info log statement to log the discovered devices as their string
representation instead of pointers.
This changes the info log to only be the device names and the debug log
to be the whole disk struct as well.
Resolves#5625
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
The volume sources for an OSD on PVC were relying on the ordering
of the volume sources slice. While this was working, it was causing
headaches and potential future developer error when being
interpreted incorrectly. The addition of the wal pvc device
would make the issue even more pronounced. Now each PVC used
for the OSD will be identified in a map by name such as data
and metadata.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When obc creation fails in Grant() or Provision() the resources such as rgw user or bucket
created while provisioning need to remove.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
This commit contains CR implementations for:
CephObjectRealm
CephObjectZoneGroup
CephObjectZone
Also there are changes made to the objectstore
to add rgws in the object-store to zones and
zone groups in a multisite configuration and
the removal of the --default parameter for any
realms/zonegroups/zones that are created.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
When running Octopus, we still need to turn on the balancer module. The
distinction is tricky, the module is "enabled" but it has to be "turned
on" and configured.
This was only working when the `pg_autoscaler` module was explicitly
listed in the CephCluster spec mgr section module section but not
automatically configured when running Octopus (the `pg_autoscaler`
module is already enabled).
Signed-off-by: Sébastien Han <seb@redhat.com>
The mgr crash module is always enabled so we don't need to run the
command again. It saves some orchestration time.
Signed-off-by: Sébastien Han <seb@redhat.com>
When the PVC template increases in size for the storageClassDeviceSet
in the cluster CR, we need to increase the size of the PVC and restart
the OSD. The OSD is restarted by changing a variable on the pod spec
that indicates the desired size of the OSD.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When integrating rook with istio, service port names need to be prefixed by their protocol.
Trying to fix this by removing static port names in favor of configurable names.
Closes: #5587
add protocol prefix to service port names, hardcoded as discussed. renamed container ports
Signed-off-by: Alex Flom <alexander.flom@gmail.com>
Travis Nielsen
subhamkrai
Ahmad Nurus S
Sébastien Han
Madhu Rajanna
Vineet Badrinath
Satoru Takeuchi
binoue
Alexander Trost
UMEZAWA Takeshi
Jared Watts
Andreas Feldmann
Jiffin Tony Thottan
Ali Maredia
Alex Flom