The integration tests have been mostly running on the flex driver
with only a newer test on the csi driver. With the CSI driver being
the preferred driver going forward, now the integration tests will
all be running with the CSI driver with the exception of a test
suite that is only dedicated to the flex driver.
A number of other test improvements are also made for code
readability, test stability, and removing unused options.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The replication and erasure code settings are mutually exclusive
so must both be treated as optional by the schema validation.
The minimum must be set to 0 to treat them as optional.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The integration tests were always running two MDS daemons active,
with two standby. This is now parameterized so the test can request
how many MDS daemons to run. The smoke suite will run two active
and the rest will just run a single active MDS.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The integration test was disabled due to removing support of pre-ceph-volume
OSDs as well as OSDs on directories. Now we re-enable the tests, with the
following approach:
- The base install in Rook v1.1 with the latest mimic release that
had c-v support
- The upgrade goes from v1.1 to Rook v1.2 then Rook master
- The final upgrade step is from mimic to nautilus
For efficiency the skipUpgradeChecks flag is added.
Logs are also collected between each upgrade step to improve
troubleshooting.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit enables testing OSDs over PVCs by modifying the
multi-cluster test to use PVC for provisioning OSDs when `manual`
storageClass is present in the cluster.
Signed-off-by: Ashish Ranjan <aranjan@redhat.com>
Fixed conditions getting resetted after the operator restart.
Did the changes which required to implement conditions on the rook ceph cluster
Conditions will eliminate the current status.State and incorporates a type which
provides much more description to the current status of the cluster.
Signed-off-by: Nizamudeen <nia@redhat.com>
The integration tests only have a single node so the upgrade
checks do not provide any real safety for the cluster during
the upgrade. We will be able to improve the reliability and speed
of the tests by disabling these checks.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Versions of k8s prior to 1.14 do not support the nullable field in
CRD properties. As k8s 1.13 remains part of our support matrix and
as this field must remain nullable, we must remove CRD validation
of SecurePort. Range validation of this field has been moved into
the logic of rgw.validateStore.
Fixes: #4693
Signed-off-by: Elise Gafford <egafford@redhat.com>
Somehow the job was stuck on 'fdisk -l', the logic to wipe the block
device changed and we don't need that command anymore.
We wipe the disk in the PV loop.
Signed-off-by: Sébastien Han <seb@redhat.com>
Multiple things:
1. We removed all the function/methods/tests that were used to
create and manage rook legacy OSDS as well as bringing support to
Bluestore OSD only.
It also fixes various go-lint issues in the respectives files.
2. use c-v inventory to detect available devices:
Now we rely on the 'ceph-volume inventory' command to tell us if a
device is available or not.
3. implement raw mode for osd on pvc
When an OSD will be bootstrap on a PVC, the new c-v raw mode will be
used. It consists of putting block, db and wal under the same device.
Here LVM is out of the picture and the raw device is used as is. The
implementation is backward compatible so existing OSD on PVC will LVM
will continue to operate.
Closes: https://github.com/rook/rook/issues/4363
Signed-off-by: Sébastien Han <seb@redhat.com>
Running integration tests locally on k8s 1.13 was causing an error
with parsing the command line flags. We can't call flags.Parse()
from an init() method.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When the tests run in a PR, they can only run against a single version
of K8s by default. If more than five k8s versions are supported in hte
CI, we will need to run some of the suites on multiple versions.
The versions are comma-separated in the list.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
In the Ceph upgrade integration test, upgrade from Rook v1.0 with Ceph
Mimic v13 to install legacy disk-based OSDs. Then upgrade Ceph to
Nautilus, then Rook to v1.1, then v1.2, then v1.3 (master currently) to
make sure that Rook is able to run legacy OSDs created without
ceph-volume.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Sometimes we fail to get logs for pods using this method, notably the
operator pod. It is unknown why this happens. Pod logs are VERY
important, so try again using kubectl.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
When creating a CephObjectStore object, operator will
use .Gateway.Port or .Gateway.SecurePort to create k8s
Service object, if the port is invalid, the Service
will not be created.
Note .Gateway.Port/.Gateway.SecurePort should in 1~65535,
however .Dashboard.Port is 0~65535 because 0 will use
default setting for .Dashboard.Port and there is no
such mechanism for .Gateway.Port/.Gateway.SecurePort
Closes: https://github.com/rook/rook/issues/4574
Signed-off-by: Yu Chih <secret104278@gmail.com>
Removed some obsolete instructions from the 1.1 upgrade
and made a few minor fixes to make the upgrade to 1.2 smoother.
With the addition of the CephClient CRD, the CRD needs to be
created before the upgrade or else the operator log will be
filled with errors until it is created. The CSI driver also
had an error when registering after the upgrade due to an RBAC
change.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Disable the dashboard in the upgrade test because upgrading Ceph from
Mimic to Nautilu with Rook v1.0 can stall for a LONG time when updating
the mgr module. We are pretty sure there is very little risk that the
upgrade test will expose problems with the dashboard module that aren't
caught by other integration tests.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Reset the integration test k8s helper's `RetryLoop` to its original
value, and instead only wait an extra long time to allow the mgr module
updates to take a long time after Ceph is updated from Mimic to Nautilus
as part of Ceph's upgrade integration test.
Updating mgr modules can hang for quite a while, which causes the tests
to time out waiting for the OSDs to be updated. Allow this to take a
long time so the tests aren't as flaky.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
ceph client CRD refactoring
Add info about client crd to documentation
Add tests for client controller CRD
Signed-off-by: Mateusz Los <los.mateusz@gmail.com>
Before starting an integration test, run a job on all nodes to wipe the
disks so that the integration tests will actually test Rook using the
disks for storage.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
During upgrade tests, Rook should verify that it can still run legacy
OSDs. This includes directory-based OSDs, filestore disk OSDs, and
bluestore disk OSDs installed without ceph-volume (i.e., before mimic
v13.2.2) can still be run after upgrade.
This necessitates running the upgrade test twice; once with filestore
and once with bluestore.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Using the current working directory as the base test directory
fails with an unclear error message when running mkfs for OSDs
if tests are run when the k8s master node is not running on
localhost.
This change creates a new flag for the test suite to set the
base test directory, but uses a default that is safe for
virtualized test environments ("/data").
Fixes: #4205
Signed-off-by: egafford <egafford@redhat.com>
This will be helpful to list the CSI drivers
deployed in the kubernetes cluster. if we have
N number of CSI drivers deployed in the cluster,
the user can query kubectl get csidriver and get
the list of registered CSI drivers and it requires
kube 1.14+
This removes the deployment of Attacher sidecar container,
as we are setting the attacher required to false during
the CSIDriver object creation.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The topology of the cluster should be based on the node labels rather
than a setting in the cluster CR. This allows a much richer and more
dynamic topology to be configured. The location will now be ignored
if specified in the cluster CR.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The integration tests were creating several namespace-specific resources
in the system namespace instead of the namespace with the cluster. This
was only affecting the rook-ceph-osd and rook-ceph-mgr service accounts,
which hadn't been exercised until the nodes were queried by osds for
topology awareness.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We removed the topologyAware CRD option since it was redundant with the
use of an OSD being backed by a PVC.
So now, if an OSD is backed by a PVC we assume the topology aware
decision and will discover zone and region labels on that host.
Signed-off-by: Sébastien Han <seb@redhat.com>
The block integration tests are a source of intermittent failures
in the CI. The PVCs were not being confirmed as removed before the
pools were deleted. Then the pool would not be removed since there
might still be a block image from the PVC that wasn't deleted yet.
Now the tests will ensure the PVCs and their block images are
removed before the pool is deleted.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Travis Nielsen
Sébastien Han
Ashish Ranjan
Nizamudeen
Madhu Rajanna
Elise Gafford
Blaine Gardner
Yu Chih
Mateusz Los
Rohan CJ
Sebastian Wagner