The integration tests will now read the manifests from the same source
that is used in the examples for installation. No longer is there a need
for a copy of the CRDs in the integration test code.
The tests will read the manifests directly from disk under a path
relative to the rook root. The upgrade test will read the manifests from
a github url where the base version has been published.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Since the 1.5 releaase we need the integration test to upgrade from
1.5 to master instead of from 1.4 to master.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This reverts commit 114a949cfb since
14.2.14 is out and has a fix to use raw mode instead of LVM mode on
partitions.
Signed-off-by: Sébastien Han <seb@redhat.com>
Do not use old Ceph v15.2.7 in integration that was working around the
issue of ceph-volume partition support being removed in v15.2.8.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
(cherry picked from commit 99cee7648cfaf72b02d62e281a2ac3a18bce4132)
Even though CRs for bucket health check was added, CRDs were missing from
crds.yaml file. So the health check always enabled for RGW.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
Remove features and design that supports adding OSDs to Ceph clusters
via `spec:driveGroups`. Update the Ceph upgrade doc that informs users
who currently use Drive Groups (we believe there are none of these
users) how to migrate to using the `spec:storage` config.
Resolves https://github.com/rook/rook/issues/7275
Revert "ceph: fix drive group deployment failure"
This reverts commit 76f1d9944e.
Revert "ceph: osd: add drive groups spec to cluster CR"
This reverts commit 7117fc12b7.
Revert "design: ceph orchestrator module add/remove OSDs"
This reverts commit 178187d035.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Add the cephfilesystemmirrors definition for CI runs where the
Kubernetes version is 1.15 and extension v1 extensions are not
supported.
Closes: https://github.com/rook/rook/issues/7168
Signed-off-by: Sébastien Han <seb@redhat.com>
The YugabyteDB team has decided to move support of their operator
to a new repo at https://github.com/yugabyte/yugabyte-operator.
The operator in Rook is no longer needed. Further usage of
the YugabyteDB operator is recommended at the new location.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
integration test was failing frequently due to some
intermittent failures.
```
Error from server (InternalError): error when creating
"STDIN": Internal error occurred: failed calling webhook.
```
(This error is not coming from us most probably)
This is kind of workaround so we get green build
as we still don't know the root cause.
Signed-off-by: subhamkrai <srai@redhat.com>
The deviceClass was missing from the object store CRD schema,
disallowing the device class from being specified on
the object store pools.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
disable admission controller for helm suite.
v1 version of admissionregistration.k8s.io/v1
require minimum v1.16.0 of k8s. All other suite
was disabled earlier this was left.
Signed-off-by: subhamkrai <srai@redhat.com>
With Ceph Pacific, Rook can now deploy the cephfs-mirror daemon.
This initial commit covers the deployment of a single daemon only.
Multiple mirror daemons is currently untested.
Only a single mirror daemon is recommended.
The configuration of peers will come in a later PR since the mgr module
is still pending upstream: https://github.com/ceph/ceph/pull/39050
The same goes for integration tests, they will get added later once we
start testing on Pacific.
Closes: https://github.com/rook/rook/issues/7002
Signed-off-by: Sébastien Han <seb@redhat.com>
The PDBs have been stabilizing for a good length of time now since
they were created in v1.1, and later redesigned in v1.5. The time
has come to enable the feature by default so everyone can enjoy
the stable Rook storage even while draining K8s nodes.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
v1 version of admission controller require minimum v1.16.0
of k8s. So, this commits disable admission controller when
k8s version older than v1.16.0.
Signed-off-by: subhamkrai <srai@redhat.com>
disabling admission controller for the upgrade test.
Upgrade test was using older controller runtime version
and api v1 need latest version controller runtime(v0.7).
Signed-off-by: subhamkrai <srai@redhat.com>
The cockroachDB operator has not had community support in Rook.
Therefore, the time has come to deprecate and remove it.
If the sources are still needed, there is always git history.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The integration tests check after every test suite that the cluster is
either ready or connected. Sometimes the operator is in progressing state
because the reconcile may be triggered by some event that is unpredictable
at the end of the test. For test stability we allow the progressing status.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
With the 1.5 schema added to the CRDs, the devices at the root
level of the storage element were missed. Now the ability to
specify devices at the root storage level to apply to all
nodes is restored.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When verifying OBC creation, validating that secret and configmap exist
is good, but the definitive validation is to check that the OBC's phase
is "Bound".
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Update to the latest lib bucket provisioner code.
Fixes issue 6650
Modifies CRD for objectbucketclaims to fix an additional bug where an
ObjectBucket's 'ClaimRef' is lost due to the CRD validation being
specified incorrectly.
Changes OBC deletion/cleanup to delete the bucket before the user. A
user cannot be deleted without an unsafe purge option if the user has
buckets associated to it.
Does not reintroduce bug 6767 from previous fix for 6650
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The latest ceph-volume does not support creating OSDs on partitions.
The github actions only have a partition available, so we will run
the github tests on v14.2.12 and v15.2.7 that still support partitions,
while the Jenkins environment has a raw device available where we
can run the latest versions of Ceph in the tests.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The snapshot controller is specifying to use the canary image instead
of the expected version. Update the tests to set the correct version.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The hostpath provisioner has never been supported and neither is it
working on K8s 1.20. For the tests we will simply use static
local PVs so we can avoid the whole problem of an unsupported
hostpath provisioner.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Add meta-comments to manifests to allow basic templating via `sed`.
Add the following types of meta-comments:
- # namespace:X
- A basic namespace
- replace the field with a namespace for X
- # serviceaccount:namespace:X
- A service account namespace for SCC
- e.g., "system:serviceaccount:<ns>:rook-ceph-system"
- Replace the namespace "<ns>" with with a namespace for X
- # provisioner:namespace:X
- A provisioner identifier with namespace prefix
- e.g., "<ns>.cephfs.csi.ceph.com"
- e.g., "<ns>.ceph.rook.io/bucket"
- Replace the namespace "<ns>" with a namespace for X
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
When the cluster is external we want to expose manager service port
along with the endpoints.
This allows us to connect but Rook will keep on using 9283 as a facing
port for Prometheus and more.
```
monitoring:
enabled: true
...
...
externalMgrPrometheusPort: 9283
```
Signed-off-by: Sébastien Han <seb@redhat.com>
testCephHelmSuite is failing in pre-k8s v1.16
due to invalid schema. v1beta1 doesn't support
null value so returning quotes instead of an empty
string.
Signed-off-by: subhamkrai <srai@redhat.com>
We can now collect logs directly into a side-car container.
A new CRD spec has been added:
spec:
logCollector:
enabled: true
periodicity: 24h
Every 24h we will rotate log files for each Ceph daemon.
Signed-off-by: Sébastien Han <seb@redhat.com>
Rook's crashcollector pod posts entries to the ceph cluster when a crash occurs.
Over time the number cluster may hold crash entries needlessly.
To clean up old crash entries, this PR adds a field to the ceph cluster CR for the user to specify the number of days a crash entry should be kept for.
Providing a value for the field keepXDays creates a cronjob that runs every day at midnight, calling "ceph crash prune <keepXDays>".
Closes: https://github.com/rook/rook/issues/6332
Signed-off-by: Renan Campos <rcampos@redhat.com>
-creates a single PDB (max-unavailable=1) for all OSDs. This PDB allows one OSD to go down at a given time.
-When a drain is detected, blocking PDBs (max-unavailable=0) will be created for each failure domain that is not being drained and the main PDB (max-unavilable=1) will be deleted. This will allow all the OSDs in the currently drained failure domain to be removed while blocking the deletion of OSDs in other failure domains.
-Once the PGs are healthy again, the blocking PDBs will be deleted and the main PDB will be restored.
-Add PG healthcheck timeout
-Delete any legacy node drain pods and blocking OSD PDBs
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Now, we can schedule snapshots on pools from the CephBlockPool CR when
the pool is mirrored.
It can be enabled like this:
```
mirroring:
enabled: true
mode: pool
snapshotSchedules:
- interval: 24h # daily snapshots
startTime: 14:00:00-05:00
```
Multiple schedules are supported since snapshotSchedules is a list.
Signed-off-by: Sébastien Han <seb@redhat.com>
to run the integration test there needs
to be a few changes in manifests like using
`deviceFilter` and other related changes.
Signed-off-by: subhamkrai <srai@redhat.com>
Travis Nielsen
Sébastien Han
Blaine Gardner
Santosh Pillai
Frank Ritchie
subhamkrai
Madhu Rajanna
Blaine Gardner
Satoru Takeuchi
Renan Campos
Arun Kumar Mohan