The reconcile was skipping updating most pool properties for
object stores. The implementation of pools between the file,
object, and pool controllers had some duplicate code, so
this change also factors out the common code for better
reuse in a single place. Anytime a pool is created or updated,
it will now consistently update all the pool properties
that are expected to be modifiable.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
If the pool application is already set, skip setting it again
to avoid a warning message being logged that it is already
set.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The built-in pools device_health_metrics and .nfs created by ceph
need to be configured for replicas, failure domain, etc.
To support this, we allow the pool to be created as a CR.
Since K8s does not support underscores in the resource names
the operator must translate this special pool name into
the name expected by ceph.
This also sets the basis for allowing filesystem data
pools to specify the desired pool name instead of requiring
a generated name.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The failure domain is baked into the crush rule that is
created for a pool. To allow for an updated failure domain
on the pool, create a new crush rule specific for that
failure domain and update the pool with the new rule.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The cluster info is important context for the cluster controller to
create the cluster, and all the fields must be properly set.
A test cluster name was being set temporarily, resulting in
mons incorrectly getting the wrong cluster CR name. There is no
known issue from the temporary value, it was just exposed by
https://github.com/rook/rook/pull/8678 setting the value to a label.
Now the functions are more clearly named so only unit and
integration tests should be using the test value for the cluster
name where it is not important.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Both `ExecuteCommandWithOutputFileTimeout()` and
`ExecuteCommandWithOutputFile()` generate unnecessary system calls by
creating/reading/removing files where the stream output of the command
can simply be used. So sticking with `ExecuteCommandWithOutput()` and
`ExecuteCommandWithCombinedOutput()` for reading outputs is sufficient.
Closes: https://github.com/rook/rook/issues/8343
Signed-off-by: Sébastien Han <seb@redhat.com>
Creates hybrid crush rule for choosing Primary OSD for
high performing SSD devices and remaining OSD for low performance HDD devices.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
The rook.io/v1 package was only an internal implementation detail and
does not have any CRDs that rely on it. The CRD deserialization should
handle the change in internal types without any issue. This separation
gives more flexibility for the storage providers to implement exactly
what is needed for their storage provider instead of forcing to use the
same types and risk affecting another storage provider.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Test the code-flow when creating crush-rule via explicit
decompile/compile crushmap, when building two-steps crush rule. Relevant
for the case where 'PoolSpec.Replicated.ReplicasPerFailureDomain' is non
zeoro.
This test requires ceph's 'crushtool' to be installed on local machine.
Otherwise, it is ignored.
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
Pools in stretch clusters will all use the same crush rule that
is generated by the operator when configuring the cluster for
stretch mode, with replica 4 and two replicas per failure domain.
Pools cannot create new crush rules, so we require that replica be
4 when the pools is created, EC is not allowed, and no new
crush rule will be created.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
In clusters where only two datacenters (or similar failure domains)
are available, a different mon and osd approach is needed to deal
with the network partitions or some other reason for one of the failure
domains going down. The Ceph stretched cluster makes the mons aware
of the failure domains by configuring one as the arbiter in a third
zone, while keeping two replicas of the data in each of the data
zoens.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The CRUSH map does not allow duplicate values (nor keys) for the
labels. That means that if the currently hardcoded label value
`default` occurs anywhere else in the tree (for example, because
some of the topology labels provided by the cloud provider use it),
the cluster cannot sucessfully spawn.
By giving the user control over the label value used for the root
CRUSH map label, it is possible to adapt the cluster to this
situation.
To be able to actually use the `default` value, the root=default
node which is created by default by ceph itself has to be removed;
since that node is accompanied by a replicated crush rule, we have
to remove that rule, too.
The integration tests are modified to sometimes use the custom
crushRoot (based on an arbitrary criterium) to get coverage across
the various suites. Separate tests could be added, but were not
deemed necessary at this point.
Fixes#4993.
Signed-off-by: Jonas Schäfer <jonas.schaefer@cloudandheat.com>
The pool spec has now a new property called "replicasPerFailureDomain"
which essentially represents the number of replicas to store in each
failure domain.
Assuming the failure domain is a datacenter (if the cluster is
stretched) then you will have 2 replicas per datacenter where each
replica ends up on a different host. This gives you a total of 4
replicas and for this, the "size" must be set to 4.
Closes: https://github.com/rook/rook/issues/5591
Signed-off-by: Sébastien Han <seb@redhat.com>
To provide more context for executing commands in a ceph cluster,
the full clusterInfo is now passed to the ceph execution commands.
All information about the cluster will now be available throughout
all the areas of the operator. The namespace, ceph credentials,
mon endpoints, and other info is a core part of that cluster info.
Arguments passed through the controllers are also simplified for
mons, mgr, osds, and other daemons where the parameters had
become too complex.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Add size parameter to pool create command instead of executing pool set command only for size
This makes pool min_size reflect replica size.
Co-authored-by: donggyu_park <donggyu_park@tmax.co.kr>
Signed-off-by: taeuk_kim <taeuk_kim@tmax.co.kr>
The PG count on metadata pools should default to rgw_rados_pool_pg_num_min
instead of the more general default pg count. This means rgw pools
will default to 8 PGs instead of 32 PGs, which means a lot more pools
can be created before hitting the default PG limit.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The pools had some legacy structs that translated between the
ceph.v1 types used by the CRDs and the internal implementation
of the pools. This simplifies the pool implementation by removing
the intermediate model and leaving us only with the ceph v1
pool types and no unnecessary translation.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The helpers for executing a process have long required an actionName
param which is not being used. Now we remove the old param
while also cleaning up various other usages of the exec
package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
As of Octopus, Ceph will prevent you from creating a pool with a
replica size of 1. Allowing such pool could lead to data loss, so enable
the new option: requireSafeReplicaSize: false if you are **ABSOLUTELY**
certain that is what you want.
Closes: https://github.com/rook/rook/issues/4889
Signed-off-by: Sébastien Han <seb@redhat.com>
currently we are not checking the pool is empty or
not before deleting, This PR adds a check to check
if any images/snapshots using the pool, if yes it will
not delete the pool
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
- Updated code to use deviceClass property when a pool is created for both "replicated" and "erasure code".
- Updated "ceph crush rule create-..." command to use "create-replicated" instead of "create-simple"
- Updated unit tests
- Updated (ceph-pool-crd.md) documentation to reflect the changes.
- Updated pending release notes.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Travis Nielsen
Sébastien Han
Santosh Pillai
Blaine Gardner
Shachar Sharon
Jonas Schäfer
taeuk_kimanddonggyu_park
ShyamsundarR
Madhu Rajanna
Alexander Trost
Tony Allen
Travis Nielsen