When OSDs are running on Nautilus we always disable old osd features and
aplpy the onces for Nautilus as described in the upgrade doc.
During an upgrade or the next time an orchestration will be called the
command will be applied. The command is idempotent so we can run it each
time.
This can be backported for 1.0.3
Closes: https://github.com/rook/rook/issues/2960
Signed-off-by: Sébastien Han <seb@redhat.com>
for the osd recovery case (DOWN->UP) log at a matching log level as the
message indicating the OSD went down.
fixes: #2904
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
The list of nodes to be queried for configuring OSDs
should include all of the K8s nodes before the placement
or other filters are applied. The operator was sometimes
missing configuring OSDs on nodes if the discover pod
hadn't finished running on a node. Now the osd prepare
job will be triggered on a node even if the discover pod
hasn't yet run there.
Signed-off-by: travisn <tnielsen@redhat.com>
The ceph controller will delete and recreate the detec-version job, when
an already existing job is found. This helps avoid cluster creation from
getting hung up on waiting for an already existing/stale job to finish.
Fixes#3081.
Signed-off-by: Kaushal M <kshlmster@gmail.com>
This reverts commit b7a564e929, reversing
changes made to 6996571b5c.
Reverting: Linking ceph noout to a node taint.
The taint is applied for reasons other than maintenance as well.
This also needs a way to respect user-set noout.
Need to revisit this with a better design.
Signed-off-by: Rohan CJ <rohantmp@gmail.com>
Add a 'ceph-version' label to application controllers in the same manner
as the prior 'rook-version' label to help with upgrades.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
As per https://github.com/ceph/ceph/pull/26856 Ceph tunes the value of
osd-memory-target when running the OSD process so there is no need to
enforce it.
We also set a safety factor to that value which has been calculated by
the Ceph eng/perf team. Without this factor, the OSD will get OOM killed
since it is consuming memory for other purposes too.
Signed-off-by: Sébastien Han <seb@redhat.com>
Allow the user to set annotations in the CRDs of the following operators which will then be set on
the resulting Pods (Deployments, StatefulSets and so on).
Operators:
* Cassandra
* Ceph
* CockroachDB
* EdgeFS
* Minio
* NFS
The Annotations related structures have been added to the
rook.io/v1alpha2 pkg.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
When Ceph OSD spins up using ceph-volume, `ceph-volume lvm activate
--no-systemd --bluestore...` runs `lvs` which can cause significant
delays when /run/udev is not mounted from the host.
Before:
[root@rook-ceph-osd-0-858f49b5-md4t9 /]# time lvs
WARNING: Failed to connect to lvmetad. Falling back to device scanning.
WARNING: Device /dev/sda not initialized in udev database even after waiting 10000000 microseconds.
...
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
osd-data-729c1fb6-440f-434c-be49-f199fa59f1c0 ceph-3bf7823b-6db3-42b6-bf8f-c36301e85238 -wi-ao---- <10.00g
real 1m30.545s
After:
[root@rook-ceph-osd-0-d8c4698b8-5vqnk /]# time lvs
WARNING: Failed to connect to lvmetad. Falling back to device scanning.
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
osd-data-6c7249cc-cbd1-4f3b-9027-03725886bb30 ceph-9808319f-8567-4930-803a-41f70e537c1f -wi-ao---- <10.00g
real 0m0.043s
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
We must expose the ceph version to the osd pod so that we can generate
the proper ceph configuration file. If we don't do this all the version
check will assume they run the opposite of the desired version and the
formatting of the `ceph.conf` will be wrong.
Signed-off-by: Sébastien Han <seb@redhat.com>
We now run all the daemon with a new option from Nautilus 14.2.1 which
allows us to tell to a daemon to not log on file. However, we can decide
to activate logging by editing the configuration flag 'log_to_file' via
the centralized config store like this for a particular daemon:
ceph config set mon.a log_to_file true
This is useful when a daemon keeps crashing and we want to collect log
files on the system.
Fixes: https://github.com/rook/rook/issues/2881
Signed-off-by: Sébastien Han <seb@redhat.com>
It's quite convinient to expose /var/log/ceph so that we can decide to
activate logs locally on the machine and see what's going on.
This is only a placeholder when a daemon is stuck crashlooping and we
want to allow administrator to gather log files.
We still do not log on file but this can be activated via a config
option passed to the centralized config option store.
For some daemons, which typically do not store any data (rgw, rbd-mirror
and mds) we had to propagate dataDirHostPath from the cluster spec to
each creation call so that the bindmount can happen.
Fixes: https://github.com/rook/rook/issues/2881
Signed-off-by: Sébastien Han <seb@redhat.com>
When instanciating an osd, we now pass clusterInfo which basically
represents a collection of information about a particular Ceph cluster. Rook uses information
// about the cluster to configure daemons to connect to the desired cluster.
From clusterInfo, we use the CephVersion which helps us putting
conditions for our code execution.
Signed-off-by: Sébastien Han <seb@redhat.com>
Add a `rook-version` label to all controller resources used by Ceph:
deployments, daemonsets, and jobs. Labels are added to controller
resources only and not to the pod templates within because changing pod
templates causes updates due to the label change. The controller
resources themselves are not updated with the label addition and
therefore don't cause an unnecessary upgrade.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
All usages of k8s go client are now also using the versioned `AppsV1() `
call for the client.
Updated MySQL and Wordpress, and Kube Registy examples to use apps/v1
Deployments.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
Make the Ceph operator more cautious about when it decides to remove
nodes from the Rook-Ceph cluster which are acting as osd hosts.
When `useAllNodes` is set to `true` we assume that the user wants to
have the most hands-off experience. Node removals are allowed when a
node is delted from Kubernetes and when a node has its taints/affinities
modified by the user (but not by automatic k8s modification as much as
possible).
When `useAllnodes` is set to `false` the only time a node is removed is
if it is removed from the Ceph cluster definition.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
The basic idea here is to replace the release name in the ClusterInfo
object with the fine grained version information queried at runtime.
This patch also removes the Name field from the cluster spec, which was
also runtime determined and was redundant with ClusterInfo relase name.
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
If someone sets limits to pod, we want to ensure the possible
experience, so we want to make sure that people do not configure
inapropriate values for certain daemons.
We decide to fail if the memory.limit is too low.
Signed-off-by: Sébastien Han <seb@redhat.com>
If the spec of the OSD daemon contains resource limits, especially
memory.limit we will use that value for setting the osd memory target
value so the bluestore OSD knows the amount of memory available for its
cache.
Signed-off-by: Sébastien Han <seb@redhat.com>
The mgr orchestrator modules need the container image to run
the ceph image for blinking the lights when a disk is down
Signed-off-by: travisn <tnielsen@redhat.com>
this is needed as cryptsetup in the pod and udev on the host coordinate
via a semaphore that must be visible in both contexts.
note that additionally the host needs to have dmcrypt compiled with udev
synchronization, which at least one minikube version does not have.
fixes: #923
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
Configure the Ceph mds daemon completely from the operator a la the
recent changes to the Ceph mon and mgr operators.
Create the mds deployments first and then
create the keyring secrets for them with their owner reference as the
corresponding deployment. This will mean that the secrets do not need to
be micromanaged. When the deployment is deleted, the secret is also
deleted. This has not been necessary for the mons or the manager since
the mons share a keyring with a lifespan of the cluster, as does the
mgr, which currently has single-mgr support only.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
All devices detected by the discovery pod were being passed to the OSD provisioning pod
thus not always honoring the desired device list that should be provisioned.
Now the provisioning pod will be given the desired state from the crd,
then apply that state depending on the actual devices detected.
Also added a helper to ensure OSDsPerDevice is always valid.
Signed-off-by: travisn <tnielsen@redhat.com>
This commit introduces the necessary changes to support the new
messenger feature coming with Ceph Nautilus (currently in development).
What changes? Now the monitor listens on two port:
* old 6789 for messenger v1, which will help us support older client
(e,g: krbd)
* new 3300 for messengers v2, which brings new improvement in the
messaging layer. This new transport layer brings numerous advantages
such as encryption improvement, speed improvement, pluggable nature to
support different network stack than TCP and many more.
We still have one Service IP, however it has 2 ports, see:
```
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
rook-ceph-mon-a ClusterIP 10.106.217.160 <none> 3300/TCP,6789/TCP 4h
rook-ceph-mon-b ClusterIP 10.99.36.175 <none> 3300/TCP,6789/TCP 4h
rook-ceph-mon-c ClusterIP 10.108.220.74 <none> 3300/TCP,6789/TCP 4h
````
The `ceph.conf` has changed and we don't force the port when using an IP
address (public addr etc). Ceph, depending on its version will naturally
start the monitors on their right port, 6789.
A new --ceph-version-name CLI argument has been added to the Rook binary
so that when the pod starts it passes the ceph version name and the
configuration of the ceph.conf, as well as daemon startup flags, happen
properly.
Given that the Rook Operator remembers the port of all the monitors it
deployed (through Pod definition), this change is not an issue and will
maintain backward compatibility.
Note that to test this you must build rook with dev container image,
which contains the dev Nautilus version. So you should do something
like:
`make -j4 BASEIMAGE='ceph/daemon-base:latest-master' IMAGES='ceph' build`
Resolves: #2525
Signed-off-by: Sébastien Han <seb@redhat.com>
Rook's behavior should not be to create a default OSD in dataDirHostPath
when no devices are present on a node. Any preexisting fallback osd
should be kept as long as no dirs or disks have been specified to keep
the legacy behavior for those clusters running with these osds in place.
The legacy deletion behavior is also kept, removing the osd as soon as
any dir or device is specified other than the dataDirHostPath dir.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>