This commit adds the flexibility to configure kube apiserver qps
as per the user requirement and also keeps the existing values as
the default one.
Signed-off-by: yite.gu <yitegu0@gmail.com>
(cherry picked from commit 80541a23c9)
initially, we have the limit of 40 char set on
storageclassdeviceset.Name but seems like that is not enough and
upgrade clusters can face issue with this. So, increasing the limit to
50.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit 1dcc99ec1d)
When the clusters reach full, nearfull, or backfill full thresholds
ceph will raise health warnings and stop allowing IO or backfill
depending on the threshold. These settings require special ceph
commands instead of being generic ceph config. Allow these settings
to be set from the CephCluster CR in the spec.storage
section.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit e479b051bc)
This PR adds a `settings` option in the `Module` struct
which can help users to futher customize the `balancer`
module with a differet mode.
Signed-off-by: sp98 <sapillai@redhat.com>
(cherry picked from commit 1ad37ecce9)
LVM-based OSDs on PVCs are legacy and are not well tested.
Therefore, we add status to the cephcluster CR that at least
gives a clue that the OSDs should be replaced.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 3628e83892)
there are some cases where storageClassDeviceSets length
are more 63 chars and osd provisioned failed due to this.
with error
```
failed to run osd provisioning job for PVC "ocs-deviceset-*-local-volume-storageclass-0-data-*": Job.batch "rook-ceph-osd-prepare-*" is invalid: [spec.template.spec.volumes[10].name: Invalid value: "ocs-deviceset-*-local-volume-storageclass-0-data-*": must be no more than 63 characters, spec.template.spec.containers[0].volumeMounts[9].name: Not found: "ocs-deviceset-*-local-volume-storageclass-0-data-*",
```
Using x-validator to limit the maxLength to the deviceClassSet.Name to
40 chars and adding code check that overall pvc name should be less than
63 chars.
Signed-off-by: subhamkrai <srai@redhat.com>
(cherry picked from commit 6f5cc9b01d)
The following printcolumns were added
CephBlockPoolRadosNamespace: Phase,
BlockPoolName, Age
CephFilesystemSubVolumeGroup: Phase,
FilesystemName, PinningConfig, Age
Also improved the error messages in
SubVolumeGroupClient
Signed-off-by: NymanRobin <nyman.robin@gmail.com>
(cherry picked from commit 70a7e61da5)
For check if cluster PGs are healthy before osd updates
Which helps gainning more confidence in the osd upgrades
Signed-off-by: mmaoyu <wupiaoyu61@gmail.com>
(cherry picked from commit 6d4afe23e5)
cephfs subvolumegroup supports creating svg
with quota and the datapool, This PR adds the
support for the same.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit f57a8b6bbe)
The csi images in the operator helm chart previously were a single
image name including the repository and tag in a single string.
Now the repository and tag values are separated to allow for
greater customization of the repository from the version tags.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 64f71d9258)
make the kubectl output for crds more verbose.
Following changes was done for each crd:
CephBlockPool:
Added print columns:
- Type
- FailureDomain
- Replication
- EC-CodingChunks
- EC-DataChunks
- Age
Extended info field of status to include:
type and failureDomain
CephObjectStore:
Added print columns:
- Endpoint
- SecureEndpoint
- Age
Added Age to print columns of following crds:
CephObjectStoreUser, CephObjectZoneGroup,
CephObjectZone, CephBucketTopic, CephClient,
CephRBDMirror, CephFilesystemMirror,
CephFilesystemSubVolumeGroup
Signed-off-by: NymanRobin <nyman.robin@gmail.com>
(cherry picked from commit 17adb16d0b)
Few day's back go 1.22 is release. Let's add that
as valid version to build on. Also, adding 1.22 as
test matric for linux build CI.
https://tip.golang.org/doc/go1.22
Signed-off-by: subhamkrai <srai@redhat.com>
Add new CSI_DISABLE_HOLDER_PODS option for rook-ceph-operator.
This option will disable holder pods when set to "true".
In the long term, Rook plans to deprecate the holder pods entirely.
This new option will allow users to choose to migrate their clusters to
non-holder clusters when they are ready and able, giving them time to
gracefully migrate before the holders are permanently removed.
This option is set to "false" by default so that upgrading users don't
have their CSI pods modified unexpectedly.
Example manifests are modified to set this value to true so that new
clusters will not deploy holder pods.
Migrating users are provided with documentation to instruct them about
the new requirements they need to satisfy to successfully remove holder
pods, a procedure for migrating pods from holder to non-holder mounts,
and a way to delete holder pods once they are no longer in use.
When users set CSI_DISABLE_HOLDER_PODS="true", the CSI controller will
no longer deploy or update the holder pod Daemonsets, but it does not
delete any existing Daemonsets. This allows already-attached PVCs to
continue operating normally with their network connection continuing to
exist in the current holder pod. This is critical to avoid causing
ia cluster-wide storage outage.
More info: https://github.com/rook/rook/issues/13055
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Until now, an object store would create all the necessary
metadata pools and the data pool that were exclusively
for its own object store. When isolation between object
stores is necessary, this would cause many pools and
PGs to be created in the cluster, which was not
manageable.
Now one set of pools can be created to be shared
by any number of object stores. The metadata and data
between each object store is isolated by
RADOS namespaces, which by design will keep the
data safe for multi-tenancy.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
add an option to set prefix for the name of obc provisioner instead of
ceph cluster namespace.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
volumegroupsnapshot feature will be enabled
by default if the required CRD's are present
if not its disabled and user will have an option
to disable it if they dont require this feature.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Reduce CRD size by removing some descriptions for things that
(a) are long, (b) are repeated, and (c) are commong kubernetes types.
Remove the `Status` field from VolumeClaimTemplates (a.k.a. PVCs) in
types.go to remove all unnecessary status-related fields.
Use `yq` to go through generated `crds.yaml` to strip out descriptions
for well-known k8s types that are long and repeated where we can't
remove them from types.go. This is mostly placement descriptions and
volumeSource descriptions.
The overall `crds.yaml` file is reduced to less than 60% of its original
size.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
Co-authored-by: Blaine Gardner <blaine.gardner@ibm.com>
Rook has been setting the application automatically on all
pools to rbd for CephBlockPools, rook-ceph-rgw for
CephObjectStores, mgr on the built-in .mgr pool,
and nfs on the built-in .nfs pool.
The legacy pool device_health_metrics is long gone
from Pacific which is no longer supported, so we can
remove special handling for that pool in the upgrade
guide and in the code.
The application setting is now available on the pool spec
although it is not expected to commonly need to override
the default applications set by Rook.
The application for CephFilesystem pools is now being
set to cephfs, where it was previously blank.
Signed-off-by: travisn <tnielsen@redhat.com>
since networkFence is a cluster-based resource so that we don't need
the namespace and ownerReferences as it cause garbage-collector errors.
Also, now we create the networkFence with clusteUID label so when doing
cleanup we match the cephCluster uid and networkFence label clusterUID.
Signed-off-by: subhamkrai <srai@redhat.com>
yite.gu
Travis Nielsen
Blaine Gardner
subhamkrai
sp98
Praveen M
NymanRobin
mmaoyu
Madhu Rajanna
Liang Zheng
parth-gr
Hyeonki Hong
Redouane Kachach
Jiffin Tony Thottan