users & buckets admin capabilities aren't spelled the same
way between rook crd (singular) and ceph (plural). It's a bit
misleading when comparing ceph admin cap and rook users.
Signed-off-by: Peter Goron <peter.goron@gmail.com>
with `requiredDropCapabilities: ["All"]` we can
drop all the default privileges and we can add the
privileges required `allowedCapabilities:` here.
Signed-off-by: subhamkrai <srai@redhat.com>
The go modules are updated to the latest client-go, vault,
and other modules. There does not appear to be a combination
of modules that will allow us to use vault v1.13.3, so we
stick with v1.13.2.
Signed-off-by: travisn <tnielsen@redhat.com>
We add a new field domainName to the Kerberos section. The field is used
to setup /etc/idmapd.conf with the domain name. This allows idmapper to
map to kerberos credential to the correct uid/gid.
We add Spec.Security.Kerberos.DomainName to the CRD
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
1) donot change rgw fqdn to ip if provided,
As now the bucket class supports the
entry of fqdn
2) update crds with new description in EndpointAddress
Signed-off-by: parth-gr <paarora@redhat.com>
The prometheus mgr module and ceph exporter can now be optionally
disabled by the monitoring.metricsDisabled setting in the
CephCluster CR. These will not be disabled by default, rather
than the mgr module being disabled by default from v1.11.4.
Signed-off-by: travisn <tnielsen@redhat.com>
Pare down the available volume sources for NFS config files so that the
CRD isn't unnecessarily huge. This allows us to recommend
`kubectl apply` again in the upgrade doc.
Size of the NFS CRD is reduced by approximately 60%.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The journal size was only applicable to the filestore OSD
format which has not been supported by rook since v1.2.
Remove the remaining obsolete setting from the examples and
code.
Signed-off-by: travisn <tnielsen@redhat.com>
ClusterID uniquely identifies a cluster. It is used as a prefix to
nslookup exported services.
For example: <clusterid>.<svc>.<ns>.svc.clusterset.local
Signed-off-by: sp98 <sapillai@redhat.com>
The defaults in CRDs cause an update and trigger a new
reconcile if the value is not set. For the key rotation
setting, the default was only being updated when the kms
feature was enabled. This update was causing the reconcile
to fail in the kms tests. With the default now in code,
the default can remain empty and no cr update will trigger
a new reconcile unexpectedly.
Signed-off-by: travisn <tnielsen@redhat.com>
The rgw dashboard can be disabled by the setting in the
CephObjectStore `gateway.dashboardEnabled` if set to false.
Signed-off-by: xiaobaowen <xiaobaowen@deeproute.ai>
validate the object store name only if it is not an external cluster
as external cluster won't create the rgw daemon and it's other resource
and there is some legacy external cluster which has more lenght of objectstore
so to run them successfully we are not validating the objectstore name
Signed-off-by: parth-gr <paarora@redhat.com>
This commit adds util function to create key rotation cron job
such as getKeyRotationContainer, getKeyRotationCronPodTemplateSpec
and makeKeyRotationCronJob.
Signed-off-by: Rakshith R <rar@redhat.com>
This commit adds KeyRotationSpec to cephcluster CR
to support encryption key rotation feature.
If enabled Rook will create a cronjob for each
encrypted PVC based OSD with given schedule set
to rotate their respective key encryption key.
Signed-off-by: Rakshith R <rar@redhat.com>
Add a hostNetwork option for a Ganesha server.
This allows you to use host networking for the cluster but still
use regular pod networking for NFS Ganesha servers
Signed-off-by: Richard Bateman <taxilian@gmail.com>
With the new mgr HA implementation (based on readiness probe) we
don't need the mgr sidecar (live-watch) anymore. This commit is
intended to remove all the related code.
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
Enabling msgr v2 and disabling msgr v1 currently requires enabling
either encryption on the wire or compression on the wire.
As more clients are running on the latest kernel, allow
the clients to run on v2 even when encryption and compression
are not enabled. Clusters that are fully running on v2
will more easily be able to change configuration between
enabling or disabling msgr v2 features.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Based on the latest info from the Ceph RGW team, update all probes. Get
rid of the liveness probe entirely. Update startup and readiness probes
to support return codes for misconfiguration (500) and for server-side
throttling (498 or 503).
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The machine disruption budgets for handling openshift
machines and machinesets are now removed since they
have been unused and unmaintained since implemented.
This feature is expected to be handled with the more
common Pod Disruption Budgets. A workaround is for the
cluster admin to set up their machine sets so they
match the zone topology. See the original design
doc from the feature here:
https://github.com/rook/rook/blob/master/design/ceph/ceph-openshift-fencing-mitigation.md
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
For the upgrade case, Rook can fail to set status information
on CephObjectStores after CRDs are updated but before the operator is
updated. To fix this, merely allow the slices to be null in the
CephObjectStore's status.endpoints.
This PR seems to be aggravating the helm filesystem upgrade test. Allow
30 more seconds for CRDs to be done before bailing. In debugging, the
filesystem often needed only an extra 3 seconds to succeed.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
External CephObjectStores already have endpoints defined by
spec.gateway.externalRgwEndpoints, and if the external store is
configured with TLS (HTTPS), the store's certificates will likely not
accept connections intended for the Service endpoint Rook creates. Some
users might not be able to easily add the service endpoint to their
certificates. Therefore, don't even bother creating a Service for
external clusters.
This does introduce a few issues. The Service seems to have been
initially created to allow multiple external RGW endpoints to be
addressable via a single address in Rook. For all connections to an
external CephObjectStore with multiple endpoints, simply choose an
endpoint at random. Random selection will prevent Rook from failing to
create buckets or users on an external store if one of the external
store's endpoints fails.
The latest OBC library (lib-bucket-provisioner) allows updating the
endpoints on ObjectBuckets after they are created. This allows Rook
users to change endpoints on external CephObjectStores without breaking
all existing OBCs. It requires implementation of the new GetUserID()
library call, requires updating Provision() and Grant() calls to be
idempotent, and it requires removing the Update() call.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
If the host network setting is changed in the cluster CR,
the existing mons must continue using the same network
settings or else the operator would update their pod
specs with the incorrect settings and cause mon quorum
to go down. Now the network setting is preserved so
the admin could switch between host and non-host network
configuration without reinstalling.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Remove the health checker for CephObjectStore. The liveness and
readiness probes go through the same code paths in RGW as creating
buckets without as much affect on the storage backend.
Full discussion: https://github.com/rook/rook/issues/11031
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Introduce a new env variable ROOK_CSI_IMAGE_PULL_POLICY in rook operator configmap which should be used to
customize the imagePullPolicy for the csi driver and imagePullPolicy property in cephVersionSpec for ceph pods.
Signed-off-by: Avan Thakkar <athakkar@redhat.com>
The sssd.conf may refer to additional files, like a CA bundle or TLS
certificates. These files need to be made available in the SSSD sidecar.
With the new `sssdGenericFiles` reference to a VolumeSource and a
`MountPath`, a provided `sssd.conf` can use the additional files.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Peter Goron
subhamkrai
dependabot[bot]
travisn
Sachin Prabhu
parth-gr
Jiffin Tony Thottan
s3rj1k
Blaine Gardner
Javier
sp98
xiaobaowen
root
Rakshith R
Redouane Kachach
Richard Bateman
Avan Thakkar
Niels de Vos