Since pacific is no longer supported, we can remove pacific specific
code.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
(cherry picked from commit f776c0b35e)
Currently, when rook provisions OSDs(in the OSD prepare job), rook effectively run a
c-v command such as the following.
```console
ceph-volume lvm batch --prepare <deviceA> <deviceB> <deviceC> --db-devices <metadataDevice>
```
but c-v lvm batch only supports disk and lvm, instead of disk partitions.
We can resort to `ceph-volume lvm prepare` to implement it.
Signed-off-by: Liang Zheng <zhengliang0901@gmail.com>
The validation logic of checking the number of devices is
wrong when `metadataDevice` is set and `osdsPerDevice` > 1.
`len(cvReports)` is the expected number of OSDs and is
the number of specified data devices multiplied
by `osdsPerDevice`.
Closes: https://github.com/rook/rook/issues/13637
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
This reverts commit 093125904b.
Once we introduced encrypted OSD on partition in #12924.
However, even though `encryptedDevice` field is `true`,
an non-encrypted OSD is created. To prevent the creation
of misconfigured OSD, it's better to revert #12924 for now.
Initially, I intended to correct this problem. However, I found
it will take long time because we need to change the KMS-related
code, init containers of both OSD pod and OSD prepare pod.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
If osd store is updated in the ceph cluster, then
delete OSDs one by one, cleanup disks and provision a new OSD on
the same disk
Signed-off-by: sp98 <sapillai@redhat.com>
few functions got change as they were deprecated
for ex: ioutil.Readfile change to os.Readfile
ioutil.TempFile change to os.CreateTemp
And fixed golang-ci-lint-issues
Signed-off-by: parth-gr <paarora@redhat.com>
It removes the condition that select the devices name prefixed with /dev/mapper as it is causing the ceph-volume command to fail.
Closes: #11301
Signed-off-by: ausias-armesto <ausiasarmesto@gmail.com>
During osd-prepare-job,
The encrypted device is found to be closed in some cases when
the OSD deployment has been removed manually accompanied
by any of following cases:
- node reboot
- csi managed PVC being unmounted etc
while re-opening the block to re-hydrate the OSDInfo,
the dm device `<pvc-name>-block-dmcrypt` clashes with
the one used by OSD pod which is stale by now.
This commit adds cmd to remove this stale dm device.
Error with output "No such device" is ignored.
Signed-off-by: Rakshith R <rar@redhat.com>
This commit implements this corner case during osd-prepare job.
```
The encrypted block is not opened, this is an extreme corner case
The OSD deployment has been removed manually AND the node rebooted
So we need to re-open the block to re-hydrate the OSDInfo.
Handling this case would mean, writing the encryption key on a
temporary file, then call luksOpen to open the encrypted block and
then call ceph-volume to list against the opened encrypted block.
We don't implement this, yet and return an error.
```
When underlying PVC for osd are CSI provisioned, the encrypted device
is closed when PVC is unmounted due to osd pod being deleted.
Therefore, this may occur more frequently and needs to be handled.
This commit implements the fix for the same.
Signed-off-by: Rakshith R <rar@redhat.com>
With octopus coming to end of life, we remove support from
Rook for deploying Ceph Octopus and assume a min version of
Pacific v16. Any checks for octopus or earlier are removed
from the reconciles since they are obsolete.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Once we are done cleaning up the content of the encrypted osd, let's
close the main LUKS device.
This avoids having dm devices on the system after the cleanup.
Closes: https://github.com/rook/rook/issues/10181
Signed-off-by: Sébastien Han <seb@redhat.com>
If a specific disk is configured to have more than one OSD per device,
or if it has a metadata device specified, exclude it from raw mode on an
individual basis.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The OSD prepare job was succeeding even if the OSDs failed to be listed
by ceph-volume. These errors should be returned and fail the job, resulting
in a retry to retrieve the OSDs. Otherwise, the failure is masked and
the admin needs to dig through logs to find why the OSDs were not configured
on that node.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We can eliminate the OSD creation code for Ceph < v15.2.0 because Nautilus(v14.2.z)
is no longer supported. In other words, we can now expect that all newly-created
OSDs on PVC are raw mode.
Please note that the existing lvm mode OSDs on PVCs still be supported after this change.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
In volume.go, remove if condition in `callCephVolume`
method where we always pass false.
In exec.go, removing `ExecuteCommandWithFile*` methods
which was not used anywhere.
Signed-off-by: subhamkrai <srai@redhat.com>
This is handling a tricky scenario where the OSD deployment is manually
removed and the OSD never reconvers. This is unlikely to happen, but
still OSD should be able to run after that action. Essentially after a
manual deletion, we need to run the prepare job again to re-hydrate the
OSD information so that the OSD deployment can be deployed.
On encryption, it is a little bit tricky since ceph-volume list again
the main block won't return anything, so we need to target the encrypted
block to list.
There is another case this PR does not handle, which is the removal of
the OSD deployment and then the node is restarted. This means that the
encrypted container is not opened anymore. However, opening it requires
more work like writing the key on the filesystem (if not coming from the
Kubernete secret, eg,. KMS vault) and then run luksOpen. This is an
extreme corner case probably not worth worrying about for now.
Signed-off-by: Sébastien Han <seb@redhat.com>
Even if we can use raw mode, do NOT use raw mode on disks. Ceph bluestore disks can
sometimes appear as though they have "phantom" Atari (AHDI) partitions created on them
when they don't in reality. This is due to a series of bugs in the Linux kernel when it
is built with Atari support enabled. This behavior does not appear for raw mode OSDs on
partitions, and we need the raw mode to create partition-based OSDs. We cannot merely
skip creating OSDs on "phantom" partitions due to a bug in `ceph-volume raw inventory`
which reports only the phantom partitions (and malformed OSD info) when they exist and
ignores the original (correct) OSDs created on the raw disk.
Resolves https://github.com/rook/rook/issues/7940
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
Currently it is not possible to set resource limits based on device classes
for different OSDs. Now adding an ability to use predefined keys for main
cluster spec Resource section to reflect resource limits for different OSDs
with different device classes.
Closes: https://github.com/rook/rook/issues/8007
Signed-off-by: Denis Egorenko <degorenko@mirantis.com>
When configuring encrypted on-pvc clusters we now set the cluster fsid
in the LUKS header. If needed we can then determine if the encrypted
block is part of our cluster or not. We also attach the pvc_name in case
it might become useful.
Closes: https://github.com/rook/rook/issues/7991
Signed-off-by: Sébastien Han <seb@redhat.com>
The deviceClass was only being set for LVM mode OSDs and was
missed for the raw mode for non-PVC. Now the deviceClass will be set
for all expected scenarios.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This fixes cases where raw provisioning mode still cannot be used for
Rook v1.6 and Ceph Pacific clusters where json.Unmarshal fails to read
the ceph-volume output after OSD provisioning.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
This mops up the last of the multiple-imports within ceph-related
packages, in pkg/daemon/ceph/agent/flexvolume/manager/ceph and
pkg/daemon/ceph/osd.
Signed-off-by: Lars Lehtonen <lars.lehtonen@gmail.com>
Update OSDs in parallel per the design in
design/ceph/update-osds-in-parallel.md
The max number of OSDs updated in parallel is currently fixed at 20.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
When c-v runs after the end of the prepare sequence, it will look for
lvm and raw-based OSDs. The raw mode detects LVM OSDs so we must trim
the list of OSD, only to report the LVM ones if their ID exists.
Closes: https://github.com/rook/rook/issues/7359
Signed-off-by: Sébastien Han <seb@redhat.com>
For simple OSD scenario that don't require the following:
* an encrypted osd
* an osd with a backing device
* multiple osd on the same block device
The OSD will be prepared using the ceph-volume raw mode which does
not use LVM on non-pvc case.
Closes: https://github.com/rook/rook/issues/4768
Signed-off-by: Sébastien Han <seb@redhat.com>
block if not defined was used with osdInfo.Device so not empty anymore
in the loop, which means it will have the same value for all OSDs in the
loop.
This is only called when running on PVC, where a single device is
present so the loop has a single iteration, so not a big issue.
Signed-off-by: Sébastien Han <seb@redhat.com>
With 5f57b6fd3a, we introduced a
regression in the validation code.
If the OSD PV comes from another cluster, GetCephVolumeRawOSDs must
return an error.
The prepare job will crash loop but at least with a useful and
comprehensive message.
Signed-off-by: Sébastien Han <seb@redhat.com>
14.2.15 lvm batch command prepare report changes
output format. This commit skips md check if ceph version
is greater than 14.2.13.
Signed-off-by: shenjiatong <yshxxsjt715@gmail.com>
The deviceClass property was being ignored when creating the
non-pvc OSDs. Now the deviceClass will be specified as a property
for individual devices, all devices on a node, or all OSDs in the
cluster, depending on the level where the config is applied in the
cluster CR.
Co-authored-by: shenjiatong <yshxxsjt715@gmail.com>
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The code was assuming that devices were passed by the user as
"/dev/sda", this is bad! We all know people should be using paths like
/dev/disk/by-id so we must support them.
Closes: https://github.com/rook/rook/issues/6685
Signed-off-by: Sébastien Han <seb@redhat.com>
Satoru Takeuchi
Liang Zheng
sp98
parth-gr
ausias-armesto
Rakshith R
Travis Nielsen
Josh Soref
Sébastien Han
subhamkrai
Blaine Gardner
Jonas Zeiger
Denis Egorenko
Lars Lehtonen
shenjiatong