The OSD PVCs were being detected one by one with a label selector.
This proves to be slow in large clusters. Instead, we now make this
more efficient by querying for all existing PVCs and looking up their
existing in memory with a map.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
this commit handle golangci-lint linter staticcheck error.
`staticcheck` - Staticcheck is a go vet on steroids,
applying a ton of static analysis checks.
To see only `staticcheck` linter output
`golangci-lint run --disable-all -E staticcheck`
Signed-off-by: subhamkrai <srai@redhat.com>
The pvc template name has either been require to be empty, or one of the
expected values such as data and metadata. Those who upgrade from 1.1
may find that if they changed it to something else, their upgrade will
fail when not one of these values. If there is only a single template,
always treat it as the data template.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The OSD deployments have some env vars duplicated in the pod spec for
the daemon container, which may cause the detection for patch changes
to fail. Now we ensure the env vars are not duplicated in the OSD pod
spec.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
this commit will add a new flag to the osd pods
which will be named according to the name of the
storageClassDeviceSet. This will help in differentiate
pods immediately.
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
This allows users to specify additional labels to be added to the components
created by the Rook Ceph operator.
Additionally the rbd mirrors are now getting their annotations and
labels set.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
The operator will now allow the resource limits to be applied below the
recommended minimums. In small clusters, even the recommended minimums
may not be necessary. A warning is still printed to the operator log,
but we allow the configuration to continue.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Added more unit tests scenario for osd on pvc such as:
* block/db/wal
* block encryption
* block/db encryption
* block/db/wal encryption
Signed-off-by: Sébastien Han <seb@redhat.com>
This init container displays the status of the encrypted pvc. This can
be really useful for debugging purpose.
Signed-off-by: Sébastien Han <seb@redhat.com>
We now support the expansion of encrypted osds. We added a new init
container to run "cryptsetup resize".
Signed-off-by: Sébastien Han <seb@redhat.com>
If the deployment spec was updated or restarted, the "encryption-open"
init container would fail to open the device since it was already
opened on the node.
Because they are no reliable post stop hook on Kubernetes, the trick is
to use a small bash init container.
Signed-off-by: Sébastien Han <seb@redhat.com>
The osd prepare resources were only being set on the main container
while the init containers either did not have resources set, or were
inheriting the resource settings from the device set resources for osds.
Now the osd prepare resources will be consistently set based on the
prepareosd resources in the main section of the cluster CR.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This is simply a code simplification to remove an extra check for
whether the OSDs are encrypted. There is no change in functionality.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The osd prepare jobs and osd daemons may have different placement
requirements. In particular, the topology spread constraints
or pod anti-affinity should only work on either the prepare job or
osd daemon, but does not work effectively on both types at the same
time. Therefore, we split out the osd prepare placement to be separate
from the osd daemon placement. If the osd prepare placement is not set
the operator will fall back to the osd daemon placement for
backward compatibility.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Now the metadata pvc will also be encrypted if the storageClassDeviceSet
has the "encrypted" flag turned on.
Signed-off-by: Sébastien Han <seb@redhat.com>
Based on the feature of metadata PVC for OSD: #4818, add the wal device.
For this, you need to create a new volumeClaimTemplates, its name must be "wal", if "wal" is
set, "metadata" device will refers specially for block.db device, and "wal" refers for block.wal
device in BlueStore.
A template will look like this:
```
volumeClaimTemplates:
- metadata:
name: data
spec:
resources:
requests:
storage: 10Gi
# IMPORTANT: Change the storage class depending on your environment (e.g. local-storage, gp2)
storageClassName: gp2
volumeMode: Block
accessModes:
- ReadWriteOnce
- metadata:
name: metadata
spec:
resources:
requests:
storage: 6Gi
# IMPORTANT: Change the storage class depending on your environment (e.g. local-storage, io1)
storageClassName: io1
volumeMode: Block
accessModes:
- ReadWriteOnce
- metadata:
name: wal
spec:
resources:
requests:
storage: 6Gi
# IMPORTANT: Change the storage class depending on your environment (e.g. local-storage, io1)
storageClassName: io1
volumeMode: Block
accessModes:
- ReadWriteOnce
```
We now map block, block.db and block.wal directly inside the container instead of
running ceph-volume activate.
Signed-off-by: Chen, Tingjie <tingjie.chen@intel.com>
We can now encrypted OSD device that were provisioned via a storage
class using the PV interface.
The encryption works at the storageClassDeviceSets level, which means we
can have encrypted and non-encrypted sets.
Using the new key `encrypted` we can turn it on.
Signed-off-by: Sébastien Han <seb@redhat.com>
The labels cannot be updated on a deployment match selector.
In v1.4 a new label was added for ceph_daemon_type that is intended
to be on the pod labels, but cannot be applied to the match selectors.
Therefore, we suppress any new labels that are added to the daemons.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Rename PodLabels function to CephDaemonAppLabels for more clarity about
what the function's purpose is.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
this commit handles all the gosec g601
error code (i.e Implicit memory aliasing
of items from a range statement).
Signed-off-by: subhamkrai <subhamkumarrai03@gmail.com>
The admin needs to start the toolbox and run a command such as ceph osd tree to see the device classes for each OSD. This PR simplifies it by storing the deviceclass info in the CephCluster CR status
closes: https://github.com/rook/rook/issues/5754
Signed-off-by: kesavan <kvellalo@redhat.com>
A long-standing issue that was only solved via a documentation note. Now,
during the prepare pod instantiation, we check for the presence of the
lvm binary on the host. Success will indicate that we can bootstrap
OSDs where failure will refuse to prepare the OSD.
Closes: https://github.com/rook/rook/issues/5627
Signed-off-by: Sébastien Han <seb@redhat.com>
Pass desired devices to the OSD provisioning container by
JSON-marshalling/-unmarshalling a disk ID with StorageConfig settings.
This will allow disks to be specified that contain special characters.
Notably, this will support /dev/disk/by-path/pci-HHHH:HH:HH.H devices
that were unsupported previously due to the format which separated
devices from params with colons (:).
Fixes#5056Fixes#5535
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
To provide more context for executing commands in a ceph cluster,
the full clusterInfo is now passed to the ceph execution commands.
All information about the cluster will now be available throughout
all the areas of the operator. The namespace, ceph credentials,
mon endpoints, and other info is a core part of that cluster info.
Arguments passed through the controllers are also simplified for
mons, mgr, osds, and other daemons where the parameters had
become too complex.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The ceph config and client packages are conceptually the same.
To avoid circular dependencies in some cases, we simplify by combining
the packages into the client package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The operator should only connect to ceph with a single set of creds.
In a converged cluster this will be the admin creds and in an external
cluster it will be lower-privileged creds. Independent clusters were
implemented with a separate set of creds. To simplify the code these
are now merged to a single set.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Add the ability to provision Ceph OSDs with Drive Groups.
This adds Drive Groups to the CephCluster CRD, and it sets code
in place for propagating this config to the OSD provisioning pod.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
This commit allows us to configure status check for each daemon:
* "mon": health check on the ceph monitors (quorum)
* "osd": health check on the ceph osds
* "status": ceph health status check
Each check is controlled by the following settings:
* disabled: whether to disable the check (default: false)
* internal: interval to run the check
* timeout: only valid for mons, is the timeout for unresponsive mon
before failling over.
Example to disable the status health check:
```yaml
healthCheck:
daemonHealth:
status:
disabled: true
```
As part of that, pod's livenessprobe can now be configured via the
following settings:
* disabled: whether to enable or not
* probe: override the current probe in place by a new one
```yaml
healthCheck:
livenessProbe:
mon:
disabled: true
```
Closes: https://github.com/rook/rook/issues/5772
Signed-off-by: Sébastien Han <seb@redhat.com>
The OSD daemon has been missing critical flags for logging to stderr
where k8s can capture the logs. Without the --log-to-stderr=true,
all the OSD logging was essentially lost until now.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Update the base operator image and cluster examples to use the latest
octopus release v15.2.4. Also cleanup some old examples and unit tests
that were still based on mimic.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The volume sources for an OSD on PVC were relying on the ordering
of the volume sources slice. While this was working, it was causing
headaches and potential future developer error when being
interpreted incorrectly. The addition of the wal pvc device
would make the issue even more pronounced. Now each PVC used
for the OSD will be identified in a map by name such as data
and metadata.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When the PVC template increases in size for the storageClassDeviceSet
in the cluster CR, we need to increase the size of the PVC and restart
the OSD. The OSD is restarted by changing a variable on the pod spec
that indicates the desired size of the OSD.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The operator should only print helpful info messages
when an OSD is going to be updated. If the OSD hasn't
changed it is just a debug message.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>