For all of the controllers besides the cluster controller,
the logging now includes the namespaced name of the resource
that is being reconciled. This will help with log troubleshooting
to help analyze logs consistently for the resource being
reconciled.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Add a resource watch to reconcile clusters when any referenced Secrets
in cephConfigFromSecret are updated. This matches the behaviour of
reconciling clusters when cephConfig changes. Without this change, if a
Secret that is referenced by cephConfigFromSecret is updated, then the
cluster is not immediately updated, so the cluster state will not match
the configuration until something else triggers a reconcile.
Resolves#16371
Signed-off-by: Martin Rowe <martin.p.rowe@gmail.com>
The logger names are seen on each line of logging. As
long as they are unique, they really don't need to be
long and descriptive, so let's make them a bit more
concise, and independent from controller names.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When writing to the operator log, where possible
the namespace of the resource on which the operator
is working will be logged as a standard prefix
to more easily troubleshoot what resource is being reconciled
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Use a sync map for the clusterMap in the cluster controller
and fix other issues to allow for concurrent cluster
reconcile.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The cephcluster controller allows setting concurrent reconciles
with a setting in the operator configmap.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
`cluster.monitoringRoutines` stores three types of
daemon health: "mon", "osd", and "status". These are
used by three goroutines respectively, resulting in:
fatal error: concurrent map reads and map writes.
Signed-off-by: Yite Gu <guyite@bytedance.com>
this commit add watcher for cm `rook-ceph-operator-config`
to look for updated value of `ROOK_USE_CSI_OPERATOR` before
adding this watcher we had to restart rook operator pod
so that it reconciles and create cephConnection CR.
Signed-off-by: subhamkrai <srai@redhat.com>
Cleanup up overall usage of CephX statuses in CephCluster.
Convert all CephX statuses to non-pointer types. There is no specific
need for pointer types, and keeping these as non-pointers means there is
not a risk of nil pointer exceptions in all the various Rook controllers
for upgraded clusters.
Move initialization of CephCluster CephX status items to
`preMonStartupActions()`. This helps resolve 2 issues:
1. 'Uninitialized' state was being set for external CephClusters where
CephX statuses are not relevant.
2. 'Uninitialized' state was being set for upgraded clusters whose key
status cannot be determined.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
add RecoverAndLogException() helper to log panics with stack trace.
added defer call in all rook controller Reconcile() methods for
better error visibility in operator logs
Signed-off-by: Oded Viner <oviner@redhat.com>
This PR implements the CSI cephx key rotation feature,
which follows overlapping rotation for non-daemon keys.
Refer to the cephx rotation API from design PR 15915 for details.
Signed-off-by: subhamkrai <srai@redhat.com>
update comment to correctly state that reconcilecephcluster
manages the cephcluster object, not cephfilesystem.
Signed-off-by: Oded Viner <oviner@redhat.com>
When finalizers are added to the CRs, a follow-up reconcile
will be triggered due to the increased generation on the CR.
Therefore, abort the initial reconcile when adding the finalizer,
and allow the follow-up reconcile to complete the configuration.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
All existing controller runtime watches are converted to use "typed"
handlers and predicates instead of operating on `client.Object`. The
intent is to be bug for bug equivalent with the existing logic while
replacing run time type assertions and switch statements with compile
time type constraints and type casts. In several cases, functions using
assertions were split up such that each function only handles a single
Kind at a time. It is hoped that this will improve readability and
maintainability while facilitating future refactoring such as migrating
some watches to using IndexFields.
Of particular note is that the massive switch statement in
`WatchControllerPredicate()` from
`pkg/operator/ceph/controller/predicate.go` has been replaced with
generics, reflection, and splitting the obc logic into its own predicate
function. There are still many helper functions operating on
`client.Object`. These were not updated unless required by the compiler
in order to limit the size of this change. The type safety of these
funcs should be improved as followup work.
It is strongly suggested that going forward, handlers and predicates
only handle a single Kind (generic or not) and that switches / type
assertions are heavily discouraged or forbidden. This PR removed all
but a single switch statement in a predicate, which should be addressed
in future work.
Signed-off-by: Joshua Hoblitt <josh@hoblitt.com>
The operator settings loaded from the configmap have proven
inefficient for load time and frequently checking the configmap.
To avoid this ineffenciency, the configmap is only loaded once
each time it is created or updated. The values in the configmap
are applied as environment variables, which then are very efficient
to query throughout the various controllers, without needing
to be concerned about loading the configmap again.
Co-authored-by: Dmitry Mishin <dmitry.mishin@gmail.com>
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
adding code changes,rbac changes required for create the new
Ceph-CSI operator CR named cephCluster in api group 'csi.ceph.io'.
Signed-off-by: subhamkrai <srai@redhat.com>
currently, it was blocking both the mds ip
instead its should block ip of of mds which is in
the same node which is down.
Signed-off-by: subhamkrai <srai@redhat.com>
since networkFence is a cluster-based resource so that we don't need
the namespace and ownerReferences as it cause garbage-collector errors.
Also, now we create the networkFence with clusteUID label so when doing
cleanup we match the cephCluster uid and networkFence label clusterUID.
Signed-off-by: subhamkrai <srai@redhat.com>
It's better to move most of discover daemon setting
from env to configmap rook-ceph-operator-config.
Although, we are moving to configmap, we keep reading settings
from env but the priority will be configmap settings.
Signed-off-by: subhamkrai <srai@redhat.com>
in the existing node watcher, we'll check for node update
event and see if there are `out-of-service` taints are applied
and `ROOK_WATCH_FOR_NODE_FAILURE` is enabled in rook-ceph-operator-configmap,
if then we'll create the networkFence cr and delete the cr if nodes come back.
And, added the unit test too.
Signed-off-by: subhamkrai <srai@redhat.com>
Removing the finalizers from cluster resources can intermittently fail
in the CI if other updates are made at similar times. The controller
runtime will retry after the failure, but if something external
removes the finalizer on the cephcluster CR, the deletion will not
continue with the removal of finalizers from the other configmap
and secret critical resources.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
if Multus is enabled the clusterinfo should be updated with
network as multus as to run the ceph cmds in remote
executor
Signed-off-by: parth-gr <paarora@redhat.com>
The cluster-wide encryption feature now
supports KMIP (Key Management Interoperability Protocol)
kms.
KMIP is an extensible communication protocol that defines
message formats for the manipulation of cryptographic keys
on a key management server.
For more information, refer:
https://en.wikipedia.org/wiki/Key_Management_Interoperability_Protocol
Signed-off-by: Rakshith R <rar@redhat.com>
The RGW support server side encryption with help of s3 protocol, till
now the `sse:kms` was support in which keys will be provided by the user
and but it will be saved in external management service like vault. Now
the support for `sse:s3` is added so the entire encryption key
management is performed by RGW itsels.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
Some context canceled were missed and not reported correctly. We had
multiple reconcilers running in //. Since they all run in goroutine then
will continue to run until they timeout (if timeout is available,
otherwise would run forever until the op is restarted).
Signed-off-by: Sébastien Han <seb@redhat.com>
Previously, the struct maintaining the list of cluster was still
initialized with a cluster item. Then the monitoring check will see that
the cluster is part of the struct already and thus won't run the
monitoring go routine again.
Now each time we cancel the context, we also remove the cluster item
from the map so that when the controller runs again, the monitoring
struct is re-populated and the go routine runs and statuses are updated.
Closes: https://github.com/rook/rook/issues/9911
Signed-off-by: Sébastien Han <seb@redhat.com>
adding observedGeneration field in the cephcluster cr
status for having better control on reconciling,
as observedGeneration field will be updated by the controller
Closes: https://github.com/rook/rook/issues/9673
Signed-off-by: parth-gr <paarora@redhat.com>
ReportReconcileResult should never be given an object that is nil. It is
impossible to force compile-time checking for this because the object's
type is an interface. We can't force this, but we can rework the
function definition to handle more cases where the object may not be
returned fully-complete, and we can rework callers to return structs
(not pointers-to-structs) so it is less likely a caller will pass nil
to the function.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The rook-ceph-csi-config config map now includes CephFS subvolumegroups
when a subvolumegroup CR is created. It is useful for ceph-csi to
understand which subvolumegroup to use for a given cluster.
Signed-off-by: Sébastien Han <seb@redhat.com>
The cluster-wide encryption feature now has a new supported key
management system: IBM Key protect. More information about the backend
can be found in Rook documentation under the
Today's implementation stores OSD encryption keys has "Standard" keys.
Signed-off-by: Sébastien Han <seb@redhat.com>
Rook does not support running multiple clusters in the same namespace,
so the operator should not reconcile if a new cluster is added.
The scenario where a cluster is added while the operator is down is also
handled. CR updates are also handled.
When the operator detects more than one cluster it will refuse to
reconcile the CephCluster, and child CRDs will block too until the
operator is ready.
The user must remove one of the clusters before can continue to perform
any reconcile.
Closes: https://github.com/rook/rook/issues/9452
Signed-off-by: Sébastien Han <seb@redhat.com>
The original PR which added event reporting unnecessarily "optimized" to
prevent spamming the API controller[1].
It is sometimes important to get events as they happen and not hide new
events behind preexisting older events. For example, in integration
tests, we may often want to wait for a controller to finish processing
an update, and the best way to do that is to wait for the
"ReconcileSucceeded" event. In order for this to be useful, the events
must be reported each time.
If we begin having problems with events being reported too often, then
we should fix the underlying issue of reconciles happening too often
instead of relying on a time-based "optimization" that hides recent
event reports that may be useful.
[1]: https://github.com/rook/rook/pull/7222
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
This commit adds context parameter to utilities in opcontroller to
remove context.TODO use in opcontroller. By this, we can handle
cancellation of reconcilers in a fine-grained way.
Signed-off-by: Yuichiro Ueno <y1r.ueno@gmail.com>
Adding finalizers to rook-ceph-mon secrets
and rook-ceph-mon-endpoints configmap
We don't want to delete this resources during disaster
because these details are needed during disaster recovery
Closes: https://github.com/rook/rook/issues/8369
Signed-off-by: parth-gr <paarora@redhat.com>
The flex driver has been fully deprecated and thus removed from Rook.
Before upgrading to v1.8, users will need to convert existing flex volumes
from flex to csi volumes.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit is a large refactor on how the operator starts, stops and
how it starts various sub-components such as the ceph-csi driver. It
also refines the way we cancel orchestrations. We don't use breakpoints
anymore but send our self a SIGUP to reload our controller runtime
manager.
The reload will happen under different circonstances like:
* a new adminission controller secret is created/deleted/changed
* a CephCluster CR is edited
As mentioned earlier, the csi driver now has its own controller, just
like flex. It reacts to change in the operator config map for particular
ROOK_CSI_ fields.
A second new controller for the operator's general config has been
created, it manages:
* the logging level
* the ceph CLI command timeout
* the discovery daemon
The operator reacts much more rapidly to cancellation events by stopping
the manager's context and reloading it.
Signed-off-by: Sébastien Han <seb@redhat.com>
They are scenarios where the mirroring information want to be shared
between clusters prior to creating pool. Because the bootstrap peer
import command needs a pool name to operate this is not suitable. So
additionally now each time the cluster is reconciled and on any new
clusters a new secret will be created that contains a boostrap peer
token. It can be exchanged with another cluster.
Signed-off-by: Sébastien Han <seb@redhat.com>
Travis Nielsen
Martin Rowe
Yite Gu
subhamkrai
Blaine Gardner
Oded Viner
Santosh Pillai
Joshua Hoblitt
Madhu Rajanna
parth-gr
Rakshith R
Jiffin Tony Thottan
Sébastien Han
Divyansh Kamboj
Blaine Gardner
Yuichiro Ueno