The 'ceph-volume raw list' command used to list OSDs on nodes by the
rook-ceph-osd-prepare- jobs return user-friendly device names (e.g.,
/dev/sda) rather than persistent device names. Friendly device names
often change when systems reboot, and even persistent device names can
change under certain circumstances (e.g., a disk controller is replaced
with a different one). To prevent OSD Pods created for raw OSDs on
nodes from crashing repeatedly if the device it was created with is
renamed, scan the list of OSDs on the host with 'ceph-volume raw list'
to find the right OSD to activate in the OSD pod's OSD activation init
container.
Fixes#7918
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
The rook.io/v1 package was only an internal implementation detail and
does not have any CRDs that rely on it. The CRD deserialization should
handle the change in internal types without any issue. This separation
gives more flexibility for the storage providers to implement exactly
what is needed for their storage provider instead of forcing to use the
same types and risk affecting another storage provider.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
After mon failover is initiated, there was a time window where if the operator
was restarted, the new mon is started and has joined quorum, but the operator
does not believe the mon should be in quorum after the operator restart.
The operator was mistakenly removing the extra mon prematurely, sometimes
causing quorum to be lost if another mon was also down at the same time.
If the mon does not come back online, steps to recover quroum would need
to be followed from the disaster guide. Now the expected list of mons
will be updated immediately during mon failover if the operator successfully
created the new mon deployment, thus removing the window where restarting
the operator can cause quorum loss.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
A directory is created under dataDirHostPath for each OSD. In host-based cluster,
its name is constructed from kernel device name like _dev_sdb though user specifies
udev persistent device name. We should use unique name among all OSDs.
Closes: https://github.com/rook/rook/issues/7878
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
If the cluster is external we want to periodically rehydrate the mgr
endpoint. This handles the scenarion where the active manager changes,
so we need to update the endpoint with the new IP address.
The create-external-cluster-resources.py script now requires an extra
permission to query the manager service so Rook can discover the active
one and its IP.
Testing:
```
[leseb@tarox~/go/src/github.com/rook/rook][external-active-mgr-change] minikube kubectl -- exec -n rook-ceph deploy/rook-ceph-tools -ti -- ceph mgr stat
{
"epoch": 37,
"available": true,
"active_name": "b",
"num_standby": 1
}
[leseb@tarox~/go/src/github.com/rook/rook][external-active-mgr-change] kubectl -n rook-ceph-external get ep
NAME ENDPOINTS AGE
rook-ceph-mgr-external 172.17.0.12:9283 3m10s
[leseb@tarox~/go/src/github.com/rook/rook][external-active-mgr-change] k scale --replicas=0 deployment rook-ceph-mgr-b
deployment.apps/rook-ceph-mgr-b scaled
[leseb@tarox~/go/src/github.com/rook/rook][external-active-mgr-change] minikube kubectl -- exec -n rook-ceph deploy/rook-ceph-tools -ti -- ceph mgr stat
{
"epoch": 40,
"available": true,
"active_name": "a",
"num_standby": 0
}
[leseb@tarox~/go/src/github.com/rook/rook][external-active-mgr-change] kubectl -n rook-ceph-external get ep
NAME ENDPOINTS AGE
rook-ceph-mgr-external 172.17.0.13:9283 3m55s
```
Signed-off-by: Sébastien Han <seb@redhat.com>
there was confusion regarding crash collector pods
in pending state which was basically due to secret
`rook-ceph-crash-collector-keyring` was not created
till mons are in quorum. this commit creates crash
collector pods after secret `rook-ceph-crash-collector-keyring`
is created.
Signed-off-by: subhamkrai <srai@redhat.com>
We don't need to set log_file to empty string since "log_to_file" is set
to False. This is probably an old leftover/hack we were doing in the
past when "log_to_file" and other related options were not there.
Because of this line
https://github.com/ceph/ceph/blob/master/src/perfglue/heap_profiler.cc#L99,
Ceph looks for the log_file conf option. In our case it was empty, so
the logging would default to the current directory which points to the
container runtime root when not set and we don't have permission to
write there.
We now force it to Ceph's default so that existing cluster will get the
fix after upgrading.
Just removing the option allows us to get dump in /var/log/ceph.
Phew, what a bug!
Signed-off-by: Sébastien Han <seb@redhat.com>
A user with unbalanced system (e.g., some OSDs use a partition which
resides on a device along-side OS partition) may want to have a
fine-grained control on the overall load of specific OSD. While osd
weight affects write-load, primary-affinity affects read-load.
This patch allow user to define osd's primary-affinity (similar to
'DeviceClass' and 'InitialWeight'), which is sent to the osd (via mon)
as part of deployment sequence, using 'ceph osd primary-affinity' command.
Valid values are within the range [0.0, 1.0). If not set, default value
is 1.
ROOK issue: https://github.com/rook/rook/issues/7773
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
Events like node drain can take more than 10-15 minutes. If the node is not update the default monTimeOut of 10 minutes, then rook will attempt to fail over the mon. This failover won't work as the node is still down.
This PR retries once before the mon failover if the mon pod is not scheduled
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
The VolumeSource type was only used internally when loading
the storageClassDeviceSets. The volumeSource element is never
expected to be specified in the CephCluster CR, so it is now
removed from the schema. The VolumeSource type is renamed to
deviceSet for clarity.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Because of the recent CRD changes made, the mon count had a minimum of
1, making the configuration of the external cluster impossible. The
operator would fail to add the finalizer:
```
2021-04-29 16:57:38.429451 E | ceph-cluster-controller: failed to reconcile. failed to add finalizer: failed to add finalizer "cephcluster.ceph.rook.io" on "test-external": CephCluster.ceph.rook.io "test-external" is invalid: spec.mon.count: Invalid value: 0: spec.mon.count in body should be greater than or equal to 1
```
We now fixed the CRD as well as adding the CR status.
Signed-off-by: Sébastien Han <seb@redhat.com>
When DEBUG logging is enabled in the operator, there are a number of overwhelming messages in the log that are very overwhelming and don't seem useful, which makes debug mode difficult to use
Updated and Cutted down the messages that are not useful in debug mode
Closes: https://github.com/rook/rook/issues/7499
Signed-off-by: parth-gr <paarora@redhat.com>
The ValidateConnectionDetails() contains `clusterSpec` assuming `SecuritySpec` only
part to `cephCluster` CRD. But we may need to validate same for `SecuritySpec` in
`cephObjectStore` CRD. Hence modifying the signature of the api.
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
The ceph upgrade blocks if the ceph heatlh is HEALTH_ERR. If the user
wants to force the upgrade despite the health error, they will need
to set skipUpgradeChecks: true in the cephcluster CR. This message
will hopefully make that setting more discoverable.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The nodeAffinity for portable OSDs is needed to ensure the OSDs are
tied to the same zone or other failure domain where the OSD was
prepared and where it is expected to run. During upgrade the topology
affinity was not being detected since the osd prepare job is skipped
in that case. Now the topology will be detected from the running
OSD daemon pod's node.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
delete updatePVCIfChanged method on "Cluster" from osd package and use
the common one ExpandPVCIfRequired from k8sutil pkg
Signed-off-by: Nitin Goyal <nigoyal@redhat.com>
When the node get added to the cluster the operator always watches for node events and starts a reconcile when a node is ready.
Checking the Node if they already have OSDs present and stopping them from reconcile.
Closes: https://github.com/rook/rook/issues/7534
Signed-off-by: parth-gr <paarora@redhat.com>
OSDs not automatically started when adding nodes to existing cluster.
Call the helper NormalizeCrushName(name) to make sure the node name can match the name in the crush map before querying for the node in the crush map, and reconcile when new nodes get added.
Closes: https://github.com/rook/rook/issues/7462
Signed-off-by: parth-gr <partharora1010@gmail.com>
Ceph support the option '--osd-crush-initial-weight' upon OSD start,
which sets an explicit weight (in TiB units) to specific OSD. Allow
passing this option all the way from the user (similar to
'DeviceClass'), for the special case where end users wants it cluster
to have non-even balance over specific OSDs (e.g., one of the OSDs is
placed over a partition alongside OS-partition).
ROOK issue: https://github.com/rook/rook/issues/7448
Signed-off-by: Shachar Sharon <ssharon@redhat.com>
After the peer is imported via a token, ceph internally stores the
information of the remote cluster. So the rbd-mirror daemon does not
need to have files (key and config) for the remote site.
This means lighter code for us, as well no more restarts for the
rbd-mirror daemon once a peer is added to the configuration.
Signed-off-by: Sébastien Han <seb@redhat.com>
The metadata name must be unique for a storageClassDeviceSet since
only one each of the sections data, metadata, and wal can be specified.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
If the cluster is deleted and the mon canaries cannot be scheduled for
any reasons, let's not wait and return.
Signed-off-by: Sébastien Han <seb@redhat.com>
CephCluster.Spec.Labels takes a key "monitoring". This is used
to inject labels into all the monitoring resources created by
the Rook operator.
Signed-off-by: Umanga Chapagain <chapagainumanga@gmail.com>
If the health spec of the CephCluster CRD has a timeout set to 0 like
so:
```
healthCheck:
daemonHealth:
mon:
disabled: false
interval: 45s
timeout: 0
```
And the mon goes out of quorum then Rook will not fail over the mon.
This is interesting when doing maintenance on a monitor and we don't
want to create a new one.
Signed-off-by: Sébastien Han <seb@redhat.com>
With the Ceph Pacific release coming this week we add support
in Rook for Pacific with the Rook v1.6 release coming soon.
The integration tests will now run across nautilus, octopus,
and pacific to cover all supported Ceph versions. The default
examples still specify Octopus until there is more bake time
for Pacific.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
OSD directories were removed in v1.2, this is some more cleanup
of dir configuration that is no longer needed.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
With Pacific comes the support for dualstack where ceph daemons can
listen on both ipv4 and ipv6 stacks.
A new field in the network spec has been added: `dualStack`
Signed-off-by: Sébastien Han <seb@redhat.com>
Travis Nielsen
Blaine Gardner
Nitin Goyal
Sébastien Han
Satoru Takeuchi
subhamkrai
Shachar Sharon
Santosh Pillai
parth-gr
Jiffin Tony Thottan
parth-gr
Lars Lehtonen
Umanga Chapagain
rohan47
Blaine Gardner