Rook has been setting the application automatically on all
pools to rbd for CephBlockPools, rook-ceph-rgw for
CephObjectStores, mgr on the built-in .mgr pool,
and nfs on the built-in .nfs pool.
The legacy pool device_health_metrics is long gone
from Pacific which is no longer supported, so we can
remove special handling for that pool in the upgrade
guide and in the code.
The application setting is now available on the pool spec
although it is not expected to commonly need to override
the default applications set by Rook.
The application for CephFilesystem pools is now being
set to cephfs, where it was previously blank.
Signed-off-by: travisn <tnielsen@redhat.com>
The pg_autoscaler is always enabled by ceph and cannot be disabled.
In a previous PR the pg_autoscaler config was removed from the main example.
Now the remaining config for the pg_autoscaler is removed as well.
Signed-off-by: travisn <tnielsen@redhat.com>
to keep the code consistent and to propogate
more details about error rook uses error wraping.
updating current code whereever its required to
wrap the details.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The cephfs PVC might exist on the kubernetes
node object but due to some timing issues the
ip might not be visible on the ceph cluster or
the client might already got evicted or disconnected
from ceph cluster. In this case we will not be
able to get IP details for the subvolume and we dont
have any check for empty ip's in the code and rook
tries to create NetworkFence CR with empty Ip's
and the NetworkFence will get moved to the Failed state.
This PR adds the necessary check and logging to prevent
this one.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
since networkFence is a cluster-based resource so that we don't need
the namespace and ownerReferences as it cause garbage-collector errors.
Also, now we create the networkFence with clusteUID label so when doing
cleanup we match the cephCluster uid and networkFence label clusterUID.
Signed-off-by: subhamkrai <srai@redhat.com>
Mgr sidecar was using a privileged security context because it needed
to create the /var/lib/rook directory, generate the config on it, and
then copy it to the /etc/ceph directory. This change creates empty
directories on /var/lib/rook and /etc/ceph so the mgr sidecar can use
them, removing the need for using a privileged security context.
Fixes: https://github.com/rook/rook/issues/13719
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
Fixes: #13692
Since the introduction of the "host" network provider, the legacy
"hostNetwork" setting is intended to be used only in combination with
the default network provider (""), but the code did not enforce this.
This change adds the required validation checks to throw errors
in invalid constellations.
These checks are added both in the operator's input validation code
and as kubernetes x-validation admission policies in the Cepcluster CRD.
Signed-off-by: Michael Adam <obnox@samba.org>
since networkFence is a cluster-based resource so that we don't need
the namespace and ownerReferences as it cause garbage-collector errors.
Signed-off-by: subhamkrai <srai@redhat.com>
Currently, when rook provisions OSDs(in the OSD prepare job), rook effectively run a
c-v command such as the following.
```console
ceph-volume lvm batch --prepare <deviceA> <deviceB> <deviceC> --db-devices <metadataDevice>
```
but c-v lvm batch only supports disk and lvm, instead of disk partitions.
We can resort to `ceph-volume lvm prepare` to implement it.
Signed-off-by: Liang Zheng <zhengliang0901@gmail.com>
The validation logic of checking the number of devices is
wrong when `metadataDevice` is set and `osdsPerDevice` > 1.
`len(cvReports)` is the expected number of OSDs and is
the number of specified data devices multiplied
by `osdsPerDevice`.
Closes: https://github.com/rook/rook/issues/13637
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
This commit removes the `CSI_ENABLE_READ_AFFINITY` since
it is no longer utilized after addition of the read affinity
option per cluster via CSIDriverSpec.
Signed-off-by: Praveen M <m.praveen@ibm.com>
If the configmap rook-config-override is empty,
there is no need to trigger the reconcile to update
the ceph daemons. This configmap update is causing
unnecessary reconciles periodically in some clusters
even when it is empty.
Signed-off-by: travisn <tnielsen@redhat.com>
This commit resolves the issue where the netNamespaceFilePath
was not being updated for all clusterIDs present in the csi configMap.
Signed-off-by: Praveen M <m.praveen@ibm.com>
Corrected the NetNamespaceFilePath generation in the
subvolumegroup & radosnamespace controller by replacing
the cephCluster.Name with cephCluster.Namespace.
Signed-off-by: Praveen M <m.praveen@ibm.com>
The name for cephcosi driver should be ceph-cosi-driver and namespace
should same as the rook operator. Otherwise request need to be failed.
Fixes: #13025
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
there was a bug in the code which doesn't
sets realm if we try to get the zonegoup
so because of that 1.12 this backport pr
for original change was not working
Signed-off-by: parth-gr <partharora1010@gmail.com>
The exporter service and service monitor should not
be deleted if an individual daemon is being removed
from a node. As long as the exporter is enabled with
v18 and newer, the exporter service and service monitor
should exist. Clusters were seeing their metrics stop
collection when the exporter service and service monitor
would disappear, especially when multiple clusters are
configured.
Signed-off-by: travisn <tnielsen@redhat.com>
previous code was calling the following command to create the
dashboard user:
> ceph dashboard ac-user-create <username> -i <password-file>
this works the first time when the user doesn't exist, however subsequent
calls for example when the password has changed or when the secret was
deleted from k8s, will not take place as this command will succeeded
because the user already exists but the password is not updated in
this case. The fix consists in adding an explicit call to the command:
> ceph dashboard ac-user-set-password <username> -i <password-file>
which ensures the password is updated correctly in the access control db
Fixes: https://github.com/rook/rook/issues/13594
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
The changes made to cosi driver are reflected. Add the cosidriver crd to
predicate workflow.
Fixes: #12545
Signed-off-by: Jiffin Tony Thottan <thottanjiffin@gmail.com>
For now we are using the operator namespace name
as the prefix for the csi driver, This PR provides
an option for the users if someone wants to have
their own prefix for the csi driver, if someone tries
to change the prefix for existing csi driver rook
operator will fail to reconcile the csi driver.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
we dont set removeMgrDaemonConfiguration to true unless all the
delete operations went successfull.
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
this commit updates the name of network fence CR to
node name + driver name, which will allow the creation of
multiple network fence per drivers on the same node, and
modifies the unit test and deletion procedure for the
same.
Signed-off-by: Riya Singhal <rsinghal@redhat.com>
with controller runtime v0.17.0, fake client
set TypeMeta for unstructured only, for other
types we need to add TypeMeta.
Signed-off-by: subhamkrai <srai@redhat.com>
subhamkrai
Travis Nielsen
Madhu Rajanna
dependabot[bot]
subham rai
Redouane Kachach
Michael Adam
Satoru Takeuchi
Liang Zheng
Praveen M
Jiffin Tony Thottan
parth-gr
Blaine Gardner
Riya Singhal