This commit:
- adds the pull section on the CephObjectRealm spec
to enables realms to be pulled instead of created.
- creates the system user and generates the access
key and secret key for the user and zones in a realm.
- adds "omitempty" to fields in multisite CRs that
are not required
Signed-off-by: Ali Maredia <amaredia@redhat.com>
We can now connect an external prometheus exporter to Rook to collect
metrics and generate alerts from Prometheus.
Just enable this in the CephCluster CR:
```
spec:
external:
enable: true
monitoring:
enabled: true
rulesNamespace: rook-ceph
externalMgrEndpoints:
- ip: 192.168.39.182
```
Closes: https://github.com/rook/rook/issues/5516
Signed-off-by: Sébastien Han <seb@redhat.com>
We currently don't use the module, so let's speed up the bootstrap
progress as well as the reconcile by not always enabling it.
It can always be enabled via the spec mgr section.
Signed-off-by: Sébastien Han <seb@redhat.com>
The external creds have been loaded from their own key. For
backward compatibility we need to check that key if the
new key is not found.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
To provide more context for executing commands in a ceph cluster,
the full clusterInfo is now passed to the ceph execution commands.
All information about the cluster will now be available throughout
all the areas of the operator. The namespace, ceph credentials,
mon endpoints, and other info is a core part of that cluster info.
Arguments passed through the controllers are also simplified for
mons, mgr, osds, and other daemons where the parameters had
become too complex.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The ceph config and client packages are conceptually the same.
To avoid circular dependencies in some cases, we simplify by combining
the packages into the client package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The operator should only connect to ceph with a single set of creds.
In a converged cluster this will be the admin creds and in an external
cluster it will be lower-privileged creds. Independent clusters were
implemented with a separate set of creds. To simplify the code these
are now merged to a single set.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When a PodAntiAffinity is set to mon, detect-version may not be scheduled because detect-version has the same PodAntiAffinity with mon.
This commit fixes this issue.
Closes#5810
Signed-off-by: Hiroshi Muraoka <h.muraoka714@gmail.com>
Add the ability to provision Ceph OSDs with Drive Groups.
This adds Drive Groups to the CephCluster CRD, and it sets code
in place for propagating this config to the OSD provisioning pod.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
This commit allows us to configure status check for each daemon:
* "mon": health check on the ceph monitors (quorum)
* "osd": health check on the ceph osds
* "status": ceph health status check
Each check is controlled by the following settings:
* disabled: whether to disable the check (default: false)
* internal: interval to run the check
* timeout: only valid for mons, is the timeout for unresponsive mon
before failling over.
Example to disable the status health check:
```yaml
healthCheck:
daemonHealth:
status:
disabled: true
```
As part of that, pod's livenessprobe can now be configured via the
following settings:
* disabled: whether to enable or not
* probe: override the current probe in place by a new one
```yaml
healthCheck:
livenessProbe:
mon:
disabled: true
```
Closes: https://github.com/rook/rook/issues/5772
Signed-off-by: Sébastien Han <seb@redhat.com>
The OSD daemon has been missing critical flags for logging to stderr
where k8s can capture the logs. Without the --log-to-stderr=true,
all the OSD logging was essentially lost until now.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Update the base operator image and cluster examples to use the latest
octopus release v15.2.4. Also cleanup some old examples and unit tests
that were still based on mimic.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The stuck mons were only being force deleted in the mon health checker.
After an operator restart, the health check may not be executed
for 20 minutes until after the timeout during the main reconcile
which is holding onto a lock for mon reconcile. Now the stuck mon
will be deleted during the reconcile as well.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
If the mon is backed by a pvc, ensure the pvc is deleted when
the mon is failed over. The pvc is being left in a bound state
even though it will no longer be used in the cluster.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
During mon failover if the mon fails to be removed, the new mon
config was not being saved. The mon removal anyway is not retried
if it fails, so it should make a best effort to remove all the
resources related to the mon, and then always update the mon
config after the failover.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit fixes an argument of the CreateCrashCollectorSecret function as
it is expected to be the namespace of the cluster.
Signed-off-by: binoue <banji-inoue@cybozu.co.jp>
When the operator loads the mons and checks for a valid maxMonId
the check of the id against the currently running mons was outdated
from legacy mon ids. The check now has to parse the new id which is
just the letter instead of having a number from legacy mon ids.
Without this fix, the maxMonId would stay incorrect if it was somehow
corrupted.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We can now explicitly set any property on a given pool by using the new
Property field in the CephBlockPool Spec.
Also, this fixes the case where both `CephBlockPool` and `CephCluster`
are created at the same time. When Rook creates the pool, the cluster is
still being bootstrapped and the global option
`osd_pool_default_pg_autoscale_mode` has not bee set yet. So the pool
gets created but its `pg_autoscale_mode` property is set to `warn`
instead of `on`.
Closes: https://github.com/rook/rook/issues/5608V
Signed-off-by: Sébastien Han <seb@redhat.com>
The volume sources for an OSD on PVC were relying on the ordering
of the volume sources slice. While this was working, it was causing
headaches and potential future developer error when being
interpreted incorrectly. The addition of the wal pvc device
would make the issue even more pronounced. Now each PVC used
for the OSD will be identified in a map by name such as data
and metadata.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This commit contains CR implementations for:
CephObjectRealm
CephObjectZoneGroup
CephObjectZone
Also there are changes made to the objectstore
to add rgws in the object-store to zones and
zone groups in a multisite configuration and
the removal of the --default parameter for any
realms/zonegroups/zones that are created.
Signed-off-by: Ali Maredia <amaredia@redhat.com>
When running Octopus, we still need to turn on the balancer module. The
distinction is tricky, the module is "enabled" but it has to be "turned
on" and configured.
This was only working when the `pg_autoscaler` module was explicitly
listed in the CephCluster spec mgr section module section but not
automatically configured when running Octopus (the `pg_autoscaler`
module is already enabled).
Signed-off-by: Sébastien Han <seb@redhat.com>
The mgr crash module is always enabled so we don't need to run the
command again. It saves some orchestration time.
Signed-off-by: Sébastien Han <seb@redhat.com>
When the PVC template increases in size for the storageClassDeviceSet
in the cluster CR, we need to increase the size of the PVC and restart
the OSD. The OSD is restarted by changing a variable on the pod spec
that indicates the desired size of the OSD.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When integrating rook with istio, service port names need to be prefixed by their protocol.
Trying to fix this by removing static port names in favor of configurable names.
Closes: #5587
add protocol prefix to service port names, hardcoded as discussed. renamed container ports
Signed-off-by: Alex Flom <alexander.flom@gmail.com>
When the cluster is using HostNetworking, Rook was either picking up the
external or internal IP of the node. This resulted in mon endpoints have
public IP addresses. Those IP are not reachable from within the cluster
so OSD/CSI couldn't access the monitors from the configmap endpoint.
Also, exposing the cluster on a public network does not seem realistic,
so sticky with private/internal IP addresses is better.
Closes: https://github.com/rook/rook/issues/5495
Signed-off-by: Sébastien Han <seb@redhat.com>
If a mon is stuck in terminating state on a failed node,
force delete the pod so it can attempt to restart. If
the mon is backed by a PV the mon can start on another
node as well.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The operator should only print helpful info messages
when an OSD is going to be updated. If the OSD hasn't
changed it is just a debug message.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The osd health check every 5 min is not frequent enough to respond
quickly enough to osds going down. Reducing the time interval
to one minute for faster response time.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The pod deletion is needed by other daemons besides the osds,
so we move the helper method into the k8sutil package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Now, we can not only cleanup monitor data, logs and crashes but the
disks too. As part of the cleanupPolicy CR spec, we have a new setting
called sanitizeDisks which holds more details:
* confirmation: the confirmation message to sanitize disks,
use "yes-really-sanitize-disks" to confirm
This will **only** wipe the metadata, so it's a fast cleanup allowing
you to re-install later but won't remove all the data from the drive.
Signed-off-by: Sébastien Han <seb@redhat.com>
The crash collector was missing the security context to properly run on
OCP, thus crashing when trying to post a crash dump.
Signed-off-by: Sébastien Han <seb@redhat.com>
As of Nautilus Ceph auto-tunes its osd_memory_target on the fly so we don't need to force it.
ROok does not support Mimic anymore so this can be removed.
Signed-off-by: Sébastien Han <seb@redhat.com>
In 1.3 we added support for the metadata pvcs, thus requiring the name
to be set on the templates to differentiate between data and metadata.
For backward compatibility we need to assume the template is for data
if it is not set.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
During cluster delection, the finalizer will not be removed until
all the PVCs are removed. Since this could wait for a long time,
as long as the deletion event is re-queued, we need to cancel
the goroutine that is watching for cluster deletion so it can
avoid running multiple goroutines as the event runs again
and again.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When a cluster is requested for deletion there is no longer
a reason to monitor the cluster health such as whether mons
are in quorum, osds are up and in, or monitor the ceph status.
The cluster will wait potentially for a long time if the
PVCs are not deleted by the admin, therefore we stop monitoring
the cluster even before the finalizer is removed.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
If the admin key is available, set the external creds struct
to use that admin username and key instead of requiring the
callers to check every time if they should use the admin
key or the external key.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The Ceph version information is not needed to be passed
to the osd health checker since mimic support was dropped.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The ceph username is all that needs to be passed to the goroutines
that are monitoring the health of Ceph. This simplifies the
initialization of the goroutines.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The monitoring goroutines that check for mon and osd health,
the ceph cluster status, and the bucket provisioner should
only be started once for each cluster. Previous to this change
and since the controller runtime conversion the goroutines were
being started again every time a reconcile was run. This means
you could potentially have many goroutines monitoring the same
thing.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
During cluster deletion, we currently only retry for a couple minutes
to wait for the pvcs to be deleted. After the timeout, we proceed
with the cluster deletion. To properly protect the pvcs for proper
cleanup, the finalizer should not be removed until the pvcs
are all confirmed to be deleted. In order to not block other cluster
events, we re-queue the deletion event to run again every 10s
until the pvcs are deleted or the finalizer is manually removed.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The controller setting for requeuing an event moved to the
opcontroller package and was no longer needed in the main
controller package.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>