The node labels were already supported for zones and regions to add to
the CRUSH map. Now all layers of the CRUSH map will be supported
with the new labels such as topology.rook.io/rack.
The labels will be detected at the osd startup time
similar to the zone and region labels already being detected.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
- Implement exportable TolerationSet with the following differences:
- Change map key to a string to ensure it is deterministic.
The old key was a struct that included a pointer.
- Sort the outputted list by this key to ensure the order is deterministic.
- Get the tolerations from the deployment instead of the pod as pod tolerations
are sometimes modified by the system. We only want user provided tolerations
in our deployment.
- Modify tests to try duplicate keys from different structs. The old way tested duplicate
keys using the same structs.
Signed-off-by: Rohan CJ <rohantmp@gmail.com>
when running OSD on PVC, orchestration should not be started again if there is any change in the device config
map. Added a check to skip orchestration on device CM update when StorageClassDeviceSets are available,
that is, when running osd on pvc.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
If the cluster has previously been initialized and the operator
is restarted, the operator needs to perform the first orchestration
to confirm basic cluster health, then start watching for CR events.
If there was a single mon pod in a failed or pending pod state, the
orchestration was blocked even if just one mon was in this state.
The scenario is when a node is lost and a mon and the operator happen
to be running on that node. The operator will restart, but the mon
will not restart because it is tied to the node that died (unless running
on a PVC). The mon would remain in a pending state while attempting
to schedule on the node that is down indefinitely and the operator would
be blocked indefinitely. Now we will just log the error and attempt
to continue.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Some testing on OpenShift has shown that enabling Hostnetworking causes
issues with ceph-volume creating OSD.
This is a pure Red Hat OpenShift downstream issue.
This is meant to be temporary while we are waiting for the Selinux team
to get back to us.
Signed-off-by: Sébastien Han <seb@redhat.com>
Change the canaries to use the rook image instead of the busybox image to
run `sleep infinity`. This removes our dependency on an external image that
we do not control.
Signed-off-by: Rohan CJ <rohantmp@gmail.com>
Generating keyrings after deployments created a race condition
resulting in intermittent OSD pod failure on the first attempt.
This change creates keyrings prior to creation of OSD deployments
and updates the owner after the creation of a deployment.
Partially fixes: rook#4089
Signed-off-by: egafford <egafford@redhat.com>
The owner reference for the NFS custom resource was using the namespace
instead of the name. This causes the k8s garbage collector to remove the
nfs resources in some scenarios such as restarting etcd.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This will be helpful to list the CSI drivers deployed
in the kubernetes cluster. if we have N number of
CSI drivers deployed in the cluster, the user can
query kubectl get csidriver and get the list of
registered CSI drivers and it requires kube 1.14+
and also the functionality is disabled by default
More info here: https://github.com/ceph/ceph-csi/pull/698
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
In Octopus, this commit
https://github.com/ceph/ceph/pull/30859/commits/c09b82a80a392ccd0da7677c7b424ce5cd3fa5d6
moved the quorum_status command to a socket call. Thus, the `ceph
quorum_status` command does not exist anymore, to use it we need to do
`ceph daemon mon.$ID quorum_status`. However, this command only works
locally so it won't work if we run it from the operator.
The `ceph mon_status` command is a general command that run from
anywhere and returns the mon map, let's use this one on the operator
code.
This is not a breaking change.
Signed-off-by: Sébastien Han <seb@redhat.com>
Even legacy osds were still running with this flag. In my previous patch
I was trying to minimize the impact of the change and was afraid the
config file was holding important information but that appears not to be
true.
The only option in the config could have the keyring path, but it's
passed in the CLI startup line.
Closes: https://github.com/rook/rook/issues/4063
Signed-off-by: Sébastien Han <seb@redhat.com>
The mgr modules take some time to run and have also been known
to hang. While the hang issues should have been resolved separately,
an improvement is still to allow the configuration to happen
in parallel for unrelated modules. All of the module configuration
will be completed before continuing with osd configuration
in order to keep the logging simpler.
Signed-off-by: travisn <tnielsen@redhat.com>
The pools always claimed to be watching all namespaces
when in fact only a single namespace is watched for pools.
Signed-off-by: travisn <tnielsen@redhat.com>
OSD on PVC does not upgrade when the user upgrades the ceph version on cluster-on-pvc yaml.
The solution incudes:
- upgrade osd prepare and daemon pods on upgrade
- skip c-v prepare if filesystem is already present on the pvc device.
- skip lvm release in case of upgrade.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
OSDs can be removed automatically with the current mechanism if a new
setting removeOSDsIfOutAndSafeToRemove is set to true. The default for
all new or upgraded clusters should be false.
Signed-off-by: rohan47 <rohgupta@redhat.com>
If mon deployments need to be created, the operator should
go ahead and create all of them instead of waiting for quorum
in between checking each mon. In particular, if a cluster is
being restored in a disaster recovery situation, none of the mons
deployments will exist. All of them should be created before
checking for quorum.
Signed-off-by: travisn <tnielsen@redhat.com>
Requests to enable mgr modules or call mgr modules should
timeout rather than hang. For example, if creating a self
signed cert request hangs, the mgr should continue with other
actions in the orchestration
Signed-off-by: travisn <tnielsen@redhat.com>
The command `fs new` already enable the application pool settings for
the cephfs pools so we don't need to run that command again.
Signed-off-by: Sébastien Han <seb@redhat.com>
Creating an object user was always waiting at least 15 seconds before
attempting to create the user. With this change the operator will check
immediately if the object store is already initialized instead
of waiting for the initial 15 seconds delay to elapse.
Signed-off-by: travisn <tnielsen@redhat.com>
The osd-prepare jobs should not inherit osd resources since this might
cause scheduling issues.
Instead, we can now use the new CRD property `prepareosd` in the resource section.
Refer to the documentation for more details.
Closes: https://github.com/rook/rook/issues/2502
Signed-off-by: Sébastien Han <seb@redhat.com>
- OSD on PVC provisioning fails if k8s version is less than 1.13.0
- updated document to reflect minimum k8s version required.
- Added check to skip OSD on pvc provisoning if the minimum k8s version requirement is not met.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
This issue is seen in brownfield cases in which max_bucket
size for the user is set to 0. In rgw, if the max_bucket is 0
then the user can create an unlimited no of buckets.
So for preventing users creating new buckets, set the value to
any negative value
Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com>
The current implementation was overriding any previous annotations set on
the object meta.
Moving the logic to its own method as well as adding unit tests.
Closes: https://github.com/rook/rook/issues/4106
Signed-off-by: Sébastien Han <seb@redhat.com>
The clusterdisruption starts up before the Ceph cluster is created and
during the initilization, it'll display invalid error messages such as:
2019-10-14T04:22:21.243679454Z 2019-10-14 04:22:21.243668 E | clusterdisruption-controller: could not check cluster health: failed to get status: exit status 1
2019-10-14T04:22:22.524222494Z 2019-10-14 04:22:22.524179 I | exec: Running command: ceph status --connect-timeout=15 --cluster=openshift-storage --conf=/var/lib/rook/openshift-storage/openshift-storage.config --keyring=/var/lib/rook/openshift-storage/client.admin.keyring --format json --out-file /tmp/605071670
2019-10-14T04:22:22.617370007Z 2019-10-14 04:22:22.617321 I | exec: Error initializing cluster client: ObjectNotFound('error calling conf_read_file',)
That error message is invalid since the cluster is not up and running
YET.
So let's simply log a message.
Signed-off-by: Sébastien Han <seb@redhat.com>
Travis Nielsen
Rohan CJ
Santosh Pillai
Sébastien Han
egafford
Dmitry Yusupov
Ashley Williams
Anton Skriptsov
Song Gao
Madhu Rajanna
rohan47
Owen Tuz
Jiffin Tony Thottan