If the health spec of the CephCluster CRD has a timeout set to 0 like
so:
```
healthCheck:
daemonHealth:
mon:
disabled: false
interval: 45s
timeout: 0
```
And the mon goes out of quorum then Rook will not fail over the mon.
This is interesting when doing maintenance on a monitor and we don't
want to create a new one.
Signed-off-by: Sébastien Han <seb@redhat.com>
With the Ceph Pacific release coming this week we add support
in Rook for Pacific with the Rook v1.6 release coming soon.
The integration tests will now run across nautilus, octopus,
and pacific to cover all supported Ceph versions. The default
examples still specify Octopus until there is more bake time
for Pacific.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
OSD directories were removed in v1.2, this is some more cleanup
of dir configuration that is no longer needed.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
With Pacific comes the support for dualstack where ceph daemons can
listen on both ipv4 and ipv6 stacks.
A new field in the network spec has been added: `dualStack`
Signed-off-by: Sébastien Han <seb@redhat.com>
With simultaneous node drains, a mon can go down while another mon is failing over. This results in two mons down and ceph become inaccessible. The commit makes maxUnavailable=0 while a mon is failing over and updates it back to maxUnavailable=1 after the failover. This update action is best effort. Any errors while updating the maxUnavailable mon pdb is only logged
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
- Update mon PDB to use maxUnavailable=1 instead of minAvailable. The maxUnavailable will always be 1 irrespective of the number of mons in the cluster
- Move mon PDB reconcile logic from Disruption Controller to Cluster Controller
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Update OSDs in parallel per the design in
design/ceph/update-osds-in-parallel.md
The max number of OSDs updated in parallel is currently fixed at 20.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
When a private docker registry is used and an image pull secret is specified in the chart, the pods with default Service Account fail to pull the image due to authentication issues.
Added rook-ceph-default service account and modify the pods specifications by adding the serviceAccountName.
Closes: https://github.com/rook/rook/issues/6673
Co-authored-by: Tareq Sharafy <tareq.sha@gmail.com>
Signed-off-by: parth-gr <partharora1010@gmail.com>
Document codespell flags that are necessary. Remove codespell flags with
minor code changes if possible.
Signed-off-by: Blaine Gardner <blaine.gardner@redhat.com>
When no VAULT_BACKEND_PATH is specified we default to the API one which
is set to "secret/", we could use a different variable but we don't want
to break the library support. Bonus point this will also fix issue with
users passing a slash at the end of the path.
Signed-off-by: Sébastien Han <seb@redhat.com>
Previously, `interval` was just a string so no special validation was
done by the OpenAPI validator. Now that it is advertised as metav1.Duration
the server will introspect it correctly. Underneath the type is still a
string so no update issue to be worried about.
Signed-off-by: Sébastien Han <seb@redhat.com>
When running encrypted OSDs on multipath the expand container was
failing to find the underlying device of the encrypted block. This was
because the underlying block was located in /dev/mapper and this path
wasn't mounted in the init container "expand-encrypted-bluefs".
This will manifest like so:
```
Underlying device for crypt device ocs-deviceset-block-dev-from-san-1-data-0-5qkmm-block-dmcrypt disappeared.
```
Signed-off-by: Sébastien Han <seb@redhat.com>
Once we are done opening the block device, we should remove the key even
though it is mounted on a tmpfs.
Signed-off-by: Sébastien Han <seb@redhat.com>
Other resources such as the service monitor need to match
the labels on the services to the active mgr, thus the active
mgr name is now set on the labels for the metrics service
and dashboard service.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
In the case of PVC,
We are giving lower priority to all placement.
We want deviceSet placement to applied and
override in case of overlapping settings and
we are merging nodeAffinity if applied in both
all placement and deviceSet.
In case of non-PVC,
we apply spec.placement
Signed-off-by: subhamkrai <srai@redhat.com>
Co-authored-by: Travis Nielsen <tnielsen@redhat.com>
The integration tests have long been painful to maintain with
settings in various places and copied to multiple types,
inconsistent variable names, and otherwise difficult to maintain
code. Now the settings for a test suite are all in one place and
they remain in the same settings type throughout the test.
The multi-cluster suite is also refactored to use the same install
and uninstall helpers as the other suites.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
For testing purposes, we need to configure the flex driver
and discovery daemon with the operator settings configmap.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
All clusters are configured with bluestore as the store type
therefore we can remove the settings where mentioned in the
docs and dead code.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
deletion of cluster is stuck when cluster is not configured. The PR skips the cleanup and removes the finalizers if the cluster was not configured, that is, if clusterInfo could not be loaded.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
It's better to validate ownerReferences when setting them. In addition, we should use
controllerrutil.Set{Controller,Owner}Reference, that have such validation, as possible.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Finally! We can now stop editing manually our crds definition. Simply
run `make crds-gen`. These two files:
* `cluster/examples/kubernetes/ceph/crds.yaml`
* `cluster/charts/rook-ceph/templates/resources.yaml`
will be autogenerated for us.
We rely on the controller-gen tool, it reads our API definitions from
`pkg/apis/` and produces the CRD files accordingly.
It uses "markers" to add extra yaml fields to the CRD, for instance we
have a lot fields with:
```
nullable: true
x-kubernetes-preserve-unknown-fields: true
```
The corresponding API type markers are:
```
// +kubebuilder:pruning:PreserveUnknownFields
// +nullable
```
For more API convention see
https://github.com/kubernetes/community/blob/master/contributors/devel/sig-architecture/api-conventions.md#optional-vs-required
and for the markers see: https://book.kubebuilder.io/reference/markers/crd-validation.html
Signed-off-by: Sébastien Han <seb@redhat.com>
If the count of mgr daemons is reduced, we remove the extra one.
The check is made during each reconcile.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
In Pacific the simple command to retrieve the active mgr is with
ceph mgr stat instead of retrieving the full ceph mgr dump.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
If there are multiple mgrs running, the operator will automatically
add pod antiaffinity across hosts by default. For stretch clusters,
antiaffinity across the stretch failure domain (e.g. zones)
will be added. Required antiaffinity will be created unless the
test setting allowMultiplePerNode is set to true.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
If there are two mgr daemons, they should be running on different
hosts or zones, depending on the failure domain.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The mgr daemon may be failed over by ceph if the active mgr is not
responding and the standby mgr is available. If the active mgr changes
the services for the dashboard and metrics will be updated with a
label selector for the new active mgr. The services cannot direct
traffic to the standby mgr or else they will be incorrectly redirected
to the active mgr.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The active mgr should match the labels on the services that
are available for prometheus and the dashboard. The selector
labels must be updated whenever there is a new active mgr.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
For simple OSD scenario that don't require the following:
* an encrypted osd
* an osd with a backing device
* multiple osd on the same block device
The OSD will be prepared using the ceph-volume raw mode which does
not use LVM on non-pvc case.
Closes: https://github.com/rook/rook/issues/4768
Signed-off-by: Sébastien Han <seb@redhat.com>
The conditions on the cephcluster CR were being set to false
when not in progress, which is misleading to the purpose of
conditions. The conditions will now always represent current
state of the cluster. Transient conditions that show progress of
a reconcile will be removed from the status.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>