Removed some obsolete instructions from the 1.1 upgrade
and made a few minor fixes to make the upgrade to 1.2 smoother.
With the addition of the CephClient CRD, the CRD needs to be
created before the upgrade or else the operator log will be
filled with errors until it is created. The CSI driver also
had an error when registering after the upgrade due to an RBAC
change.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Disable the dashboard in the upgrade test because upgrading Ceph from
Mimic to Nautilu with Rook v1.0 can stall for a LONG time when updating
the mgr module. We are pretty sure there is very little risk that the
upgrade test will expose problems with the dashboard module that aren't
caught by other integration tests.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Reset the integration test k8s helper's `RetryLoop` to its original
value, and instead only wait an extra long time to allow the mgr module
updates to take a long time after Ceph is updated from Mimic to Nautilus
as part of Ceph's upgrade integration test.
Updating mgr modules can hang for quite a while, which causes the tests
to time out waiting for the OSDs to be updated. Allow this to take a
long time so the tests aren't as flaky.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
ceph client CRD refactoring
Add info about client crd to documentation
Add tests for client controller CRD
Signed-off-by: Mateusz Los <los.mateusz@gmail.com>
Before starting an integration test, run a job on all nodes to wipe the
disks so that the integration tests will actually test Rook using the
disks for storage.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
During upgrade tests, Rook should verify that it can still run legacy
OSDs. This includes directory-based OSDs, filestore disk OSDs, and
bluestore disk OSDs installed without ceph-volume (i.e., before mimic
v13.2.2) can still be run after upgrade.
This necessitates running the upgrade test twice; once with filestore
and once with bluestore.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
Using the current working directory as the base test directory
fails with an unclear error message when running mkfs for OSDs
if tests are run when the k8s master node is not running on
localhost.
This change creates a new flag for the test suite to set the
base test directory, but uses a default that is safe for
virtualized test environments ("/data").
Fixes: #4205
Signed-off-by: egafford <egafford@redhat.com>
This will be helpful to list the CSI drivers
deployed in the kubernetes cluster. if we have
N number of CSI drivers deployed in the cluster,
the user can query kubectl get csidriver and get
the list of registered CSI drivers and it requires
kube 1.14+
This removes the deployment of Attacher sidecar container,
as we are setting the attacher required to false during
the CSIDriver object creation.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
The topology of the cluster should be based on the node labels rather
than a setting in the cluster CR. This allows a much richer and more
dynamic topology to be configured. The location will now be ignored
if specified in the cluster CR.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
The integration tests were creating several namespace-specific resources
in the system namespace instead of the namespace with the cluster. This
was only affecting the rook-ceph-osd and rook-ceph-mgr service accounts,
which hadn't been exercised until the nodes were queried by osds for
topology awareness.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
We removed the topologyAware CRD option since it was redundant with the
use of an OSD being backed by a PVC.
So now, if an OSD is backed by a PVC we assume the topology aware
decision and will discover zone and region labels on that host.
Signed-off-by: Sébastien Han <seb@redhat.com>
The block integration tests are a source of intermittent failures
in the CI. The PVCs were not being confirmed as removed before the
pools were deleted. Then the pool would not be removed since there
might still be a block image from the PVC that wasn't deleted yet.
Now the tests will ensure the PVCs and their block images are
removed before the pool is deleted.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Creating an object user was always waiting at least 15 seconds before
attempting to create the user. With this change the operator will check
immediately if the object store is already initialized instead
of waiting for the initial 15 seconds delay to elapse.
Signed-off-by: travisn <tnielsen@redhat.com>
K8s 1.16 requires apps/v1 instead of the old extensions/v1beta1 for the
apiVersion of the deployment. The tests were failing when testing on
K8s 1.16 without this change
Signed-off-by: travisn <tnielsen@redhat.com>
Just as with the mon, mgr, mds, rgw, and rbd-mirror daemons, do not
generate a ceph.conf in an init container for directory-based OSDs.
Instead use the mon config database and the commandline to supply all
the needed arguments for running these OSDs.
Also generate a keyring secret to mount to OSD pods. Use this
secret for directory-based OSDs for now with the intention to
use this for other OSDs in the future.
Signed-off-by: Blaine Gardner <blaine.gardner@suse.com>
The tests must ensure that the cluster is cleaned up so that
other test suites will not be affected by cleanup of a previous
test suite. Removing the cluster finalizer is critical to this
cleanup.
Signed-off-by: travisn <tnielsen@redhat.com>
The filesystem test deletes the client test pod by deleting the entire yaml
and sometimes hangs the integration tests. This is the most common intermittent
error in the CI. Now the deletion will happen more directly with a pod delete
command. If it does still fail deletion at least the deletion should timeout
sooner.
Signed-off-by: travisn <tnielsen@redhat.com>
Also:
* `cluster.yaml`: spec.mgr.modules is not explicily nullable
* Removed `required: mon` in `ceph_manifests.go`
Signed-off-by: Sebastian Wagner <sebastian.wagner@suse.com>
There are six test suites and six k8s versions where we currently run
the tests. For efficiency we can restrict the testing to one suite
per k8s version. Bigger or riskier changes should still run the full
set of suites on all versions. To trigger the smaller test matrix, add
[test ceph min] to the PR description
Signed-off-by: travisn <tnielsen@redhat.com>
THe boolean helm settings were only being applied if their value was true.
If the desired value was false, the value would be skipped in the chart
instead of adding it with the value of false.
Signed-off-by: travisn <tnielsen@redhat.com>
Add support for MachineDisruptionBudget controller and MachineLabel controller required for fencing
in OpenShift. This will ensure that machines are only fenced and OSDs are only stopped
when Ceph is in a healthy state.
Co-authored-by: Ashish Ranjan <aranjan@redhat.com>
Signed-off-by: travisn <tnielsen@redhat.com>
We can now enable via the cluster CR any manager module with a
setting under the new mgr element
mgr:
modules:
- name: pg_autoscaler
enabled: true
Co-authored-by: Sébastien Han <seb@redhat.com>
Co-authored-by: travisn <tnielsen@redhat.com>
Signed-off-by: travisn <tnielsen@redhat.com>
- Renamed MDSCOUNT to ActiveMDS & updated Description
This was to remove the confusion about what the count
is actually about (Active or Active+Standby).
Signed-off-by: Umanga Chapagain <chapagainumanga@gmail.com>
Travis Nielsen
Mateusz Los
Blaine Gardner
Sébastien Han
Rohan CJ
egafford
Madhu Rajanna
Sebastian Wagner
RAJAT SINGH
Umanga Chapagain