Add support for Raspberry Pi WiringPi framework // Resolve #372

HISTORY.rst

@@ -4,9 +4,12 @@ Release History
 PlatformIO 2.0
 --------------
 
-2.5.1 (2015-12-??)
+2.6.0 (2015-12-??)
 ~~~~~~~~~~~~~~~~~~
 
+* Added support for Raspberry Pi `WiringPi <http://docs.platformio.org/en/latest/frameworks/wiringpi.html>`__
+  framework
+  (`issue #372 <https://github.com/platformio/platformio/issues/372>`_)
 * Implemented Over The Air (OTA) upgrades for `Espressif <http://docs.platformio.org/en/latest/platforms/espressif.html>`__
   development platform.
   (`issue #365 <https://github.com/platformio/platformio/issues/365>`_)

docs/frameworks/index.rst

@@ -23,3 +23,4 @@ Frameworks
     libopencm3
     mbed
     spl
+    wiringpi

docs/frameworks/wiringpi.rst

@@ -0,0 +1,62 @@
+..  Copyright 2014-2015 Ivan Kravets <me@ikravets.com>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+.. _framework_wiringpi:
+
+Framework ``wiringpi``
+======================
+WiringPi is a GPIO access library written in C for the BCM2835 used in the Raspberry Pi. It's designed to be familiar to people who have used the Arduino "wiring" system.
+
+For more detailed information please visit `vendor site <http://wiringpi.com>`_.
+
+.. contents::
+
+Boards
+------
+
+.. note::
+    * You can list pre-configured boards by :ref:`cmd_boards` command or
+      `PlatformIO Boards Explorer <http://platformio.org/#!/boards>`_
+    * For more detailed ``board`` information please scroll tables below by horizontal.
+
+Raspberry Pi
+~~~~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``raspberrypi_1b``
+      - `Raspberry Pi 1 Model B <https://www.raspberrypi.org>`_
+      - BCM2835
+      - 700 MHz
+      - 524288 Kb
+      - 524288 Kb
+
+    * - ``raspberrypi_2b``
+      - `Raspberry Pi 2 Model B <https://www.raspberrypi.org>`_
+      - BCM2836
+      - 900 MHz
+      - 1048576 Kb
+      - 1048576 Kb
+
+    * - ``raspberrypi_zero``
+      - `Raspberry Pi Zero <https://www.raspberrypi.org>`_
+      - BCM2835
+      - 1000 MHz
+      - 524288 Kb
+      - 524288 Kb

docs/platforms/native.rst

@@ -17,4 +17,47 @@ Native development platform is intended to be used for desktop OS. This platform
 
 For more detailed information please visit `vendor site <http://platformio.org/#!/platforms/native>`_.
 
-.. contents::
+.. contents::
+
+Boards
+------
+
+.. note::
+    * You can list pre-configured boards by :ref:`cmd_boards` command or
+      `PlatformIO Boards Explorer <http://platformio.org/#!/boards>`_
+    * For more detailed ``board`` information please scroll tables below by
+      horizontal.
+
+Raspberry Pi
+~~~~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``raspberrypi_1b``
+      - `Raspberry Pi 1 Model B <https://www.raspberrypi.org>`_
+      - BCM2835
+      - 700 MHz
+      - 524288 Kb
+      - 524288 Kb
+
+    * - ``raspberrypi_2b``
+      - `Raspberry Pi 2 Model B <https://www.raspberrypi.org>`_
+      - BCM2836
+      - 900 MHz
+      - 1048576 Kb
+      - 1048576 Kb
+
+    * - ``raspberrypi_zero``
+      - `Raspberry Pi Zero <https://www.raspberrypi.org>`_
+      - BCM2835
+      - 1000 MHz
+      - 524288 Kb
+      - 524288 Kb

examples/raspberrypi/wiringpi-blink/.gitignore

@@ -0,0 +1 @@
+.pioenvs

examples/raspberrypi/wiringpi-blink/.travis.yml

@@ -0,0 +1,65 @@
+# Continuous Integration (CI) is the practice, in software
+# engineering, of merging all developer working copies with a shared mainline
+# several times a day < http://docs.platformio.org/en/latest/ci/index.html >
+#
+# Documentation:
+#
+# * Travis CI Embedded Builds with PlatformIO
+#   < https://docs.travis-ci.com/user/integration/platformio/ >
+#
+# * PlatformIO integration with Travis CI
+#   < http://docs.platformio.org/en/latest/ci/travis.html >
+#
+# * User Guide for `platformio ci` command
+#   < http://docs.platformio.org/en/latest/userguide/cmd_ci.html >
+#
+#
+# Please choice one of the following templates (proposed below) and uncomment
+# it (remove "# " before each line) or use own configuration according to the
+# Travis CI documentation (see above).
+#
+
+
+#
+# Template #1: General project. Test it using existing `platformio.ini`.
+#
+
+# language: python
+# python:
+#     - "2.7"
+#
+# sudo: false
+# cache:
+#     directories:
+#         - "~/.platformio"
+#
+# install:
+#     - pip install -U platformio
+#
+# script:
+#     - platformio run
+
+
+#
+# Template #2: The project is intended to by used as a library with examples
+#
+
+# language: python
+# python:
+#     - "2.7"
+#
+# sudo: false
+# cache:
+#     directories:
+#         - "~/.platformio"
+#
+# env:
+#     - PLATFORMIO_CI_SRC=path/to/test/file.c
+#     - PLATFORMIO_CI_SRC=examples/file.ino
+#     - PLATFORMIO_CI_SRC=path/to/test/directory
+#
+# install:
+#     - pip install -U platformio
+#
+# script:
+#     - platformio ci --lib="." --board=TYPE_1 --board=TYPE_2 --board=TYPE_N

examples/raspberrypi/wiringpi-blink/README.rst

@@ -0,0 +1,29 @@
+..  Copyright 2014-2015 Ivan Kravets <me@ikravets.com>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+How to build PlatformIO based project
+=====================================
+
+1. `Install PlatformIO <http://docs.platformio.org/en/latest/installation.html>`_
+2. Download `source code with examples <https://github.com/platformio/platformio/archive/develop.zip>`_
+3. Extract ZIP archive
+4. Run these commands:
+
+.. code-block:: bash
+
+    # Change directory to example
+    > cd platformio-develop/examples/raspberrypi/wiringpi-blink
+
+    # Process example project
+    > platformio run
+
+    # Run program
+    > .pioenvs/raspberrypi_2b/program

examples/raspberrypi/wiringpi-blink/lib/readme.txt

@@ -0,0 +1,38 @@
+
+This directory is intended for the project specific (private) libraries.
+PlatformIO will compile them to static libraries and link to executable file.
+
+The source code of each library should be placed in separate directory, like
+"lib/private_lib/[here are source files]".
+
+For example, see how can be organised `Foo` and `Bar` libraries:
+
+|--lib
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |- readme.txt --> THIS FILE
+|- platformio.ini
+|--src
+   |- main.c
+
+Then in `src/main.c` you should use:
+
+#include <Foo.h>
+#include <Bar.h>
+
+// rest H/C/CPP code
+
+PlatformIO will find your libraries automatically, configure preprocessor's
+include paths and build them.
+
+See additional options for PlatformIO Library Dependency Finder `lib_*`:
+
+http://docs.platformio.org/en/latest/projectconf.html#lib-install
+

examples/raspberrypi/wiringpi-blink/platformio.ini

@@ -0,0 +1,23 @@
+#
+# Project Configuration File
+#
+# A detailed documentation with the EXAMPLES is located here:
+# http://docs.platformio.org/en/latest/projectconf.html
+#
+
+# A sign `#` at the beginning of the line indicates a comment
+# Comment lines are ignored.
+
+# Simple and base environment
+# [env:mybaseenv]
+# platform = %INSTALLED_PLATFORM_NAME_HERE%
+# framework =
+# board =
+#
+# Automatic targets - enable auto-uploading
+# targets = upload
+
+[env:raspberrypi_2b]
+platform = native
+framework = wiringpi
+board = raspberrypi_2b

examples/raspberrypi/wiringpi-blink/src/blink.c

@@ -0,0 +1,48 @@
+/*
+ * blink.c:
+ *	Standard "blink" program in wiringPi. Blinks an LED connected
+ *	to the first GPIO pin.
+ *
+ * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ ***********************************************************************
+ * This file is part of wiringPi:
+ *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *
+ *    wiringPi is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    wiringPi is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with wiringPi.  If not, see <http://www.gnu.org/licenses/>.
+ ***********************************************************************
+ */
+
+#include <stdio.h>
+#include <wiringPi.h>
+
+// LED Pin - wiringPi pin 0 is BCM_GPIO 17.
+
+#define	LED	0
+
+int main (void)
+{
+  printf ("Raspberry Pi blink\n") ;
+
+  wiringPiSetup () ;
+  pinMode (LED, OUTPUT) ;
+
+  for (;;)
+  {
+    digitalWrite (LED, HIGH) ;	// On
+    delay (500) ;		// mS
+    digitalWrite (LED, LOW) ;	// Off
+    delay (500) ;
+  }
+  return 0 ;
+}

examples/raspberrypi/wiringpi-serial/.gitignore

@@ -0,0 +1 @@
+.pioenvs

examples/raspberrypi/wiringpi-serial/.travis.yml

@@ -0,0 +1,65 @@
+# Continuous Integration (CI) is the practice, in software
+# engineering, of merging all developer working copies with a shared mainline
+# several times a day < http://docs.platformio.org/en/latest/ci/index.html >
+#
+# Documentation:
+#
+# * Travis CI Embedded Builds with PlatformIO
+#   < https://docs.travis-ci.com/user/integration/platformio/ >
+#
+# * PlatformIO integration with Travis CI
+#   < http://docs.platformio.org/en/latest/ci/travis.html >
+#
+# * User Guide for `platformio ci` command
+#   < http://docs.platformio.org/en/latest/userguide/cmd_ci.html >
+#
+#
+# Please choice one of the following templates (proposed below) and uncomment
+# it (remove "# " before each line) or use own configuration according to the
+# Travis CI documentation (see above).
+#
+
+
+#
+# Template #1: General project. Test it using existing `platformio.ini`.
+#
+
+# language: python
+# python:
+#     - "2.7"
+#
+# sudo: false
+# cache:
+#     directories:
+#         - "~/.platformio"
+#
+# install:
+#     - pip install -U platformio
+#
+# script:
+#     - platformio run
+
+
+#
+# Template #2: The project is intended to by used as a library with examples
+#
+
+# language: python
+# python:
+#     - "2.7"
+#
+# sudo: false
+# cache:
+#     directories:
+#         - "~/.platformio"
+#
+# env:
+#     - PLATFORMIO_CI_SRC=path/to/test/file.c
+#     - PLATFORMIO_CI_SRC=examples/file.ino
+#     - PLATFORMIO_CI_SRC=path/to/test/directory
+#
+# install:
+#     - pip install -U platformio
+#
+# script:
+#     - platformio ci --lib="." --board=TYPE_1 --board=TYPE_2 --board=TYPE_N

examples/raspberrypi/wiringpi-serial/README.rst

@@ -0,0 +1,29 @@
+..  Copyright 2014-2015 Ivan Kravets <me@ikravets.com>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+How to build PlatformIO based project
+=====================================
+
+1. `Install PlatformIO <http://docs.platformio.org/en/latest/installation.html>`_
+2. Download `source code with examples <https://github.com/platformio/platformio/archive/develop.zip>`_
+3. Extract ZIP archive
+4. Run these commands:
+
+.. code-block:: bash
+
+    # Change directory to example
+    > cd platformio-develop/examples/raspberrypi/wiringpi-serial
+
+    # Process example project
+    > platformio run
+
+    # Run program
+    > .pioenvs/raspberrypi_2b/program

examples/raspberrypi/wiringpi-serial/lib/readme.txt

@@ -0,0 +1,38 @@
+
+This directory is intended for the project specific (private) libraries.
+PlatformIO will compile them to static libraries and link to executable file.
+
+The source code of each library should be placed in separate directory, like
+"lib/private_lib/[here are source files]".
+
+For example, see how can be organised `Foo` and `Bar` libraries:
+
+|--lib
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |- readme.txt --> THIS FILE
+|- platformio.ini
+|--src
+   |- main.c
+
+Then in `src/main.c` you should use:
+
+#include <Foo.h>
+#include <Bar.h>
+
+// rest H/C/CPP code
+
+PlatformIO will find your libraries automatically, configure preprocessor's
+include paths and build them.
+
+See additional options for PlatformIO Library Dependency Finder `lib_*`:
+
+http://docs.platformio.org/en/latest/projectconf.html#lib-install
+

examples/raspberrypi/wiringpi-serial/platformio.ini

@@ -0,0 +1,23 @@
+#
+# Project Configuration File
+#
+# A detailed documentation with the EXAMPLES is located here:
+# http://docs.platformio.org/en/latest/projectconf.html
+#
+
+# A sign `#` at the beginning of the line indicates a comment
+# Comment lines are ignored.
+
+# Simple and base environment
+# [env:mybaseenv]
+# platform = %INSTALLED_PLATFORM_NAME_HERE%
+# framework =
+# board =
+#
+# Automatic targets - enable auto-uploading
+# targets = upload
+
+[env:raspberrypi_2b]
+platform = native
+framework = wiringpi
+board = raspberrypi_2b

examples/raspberrypi/wiringpi-serial/src/serialTest.c

@@ -0,0 +1,75 @@
+/*
+ * serialTest.c:
+ *	Very simple program to test the serial port. Expects
+ *	the port to be looped back to itself
+ *
+ * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ ***********************************************************************
+ * This file is part of wiringPi:
+ *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *
+ *    wiringPi is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    wiringPi is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with wiringPi.  If not, see <http://www.gnu.org/licenses/>.
+ ***********************************************************************
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+
+#include <wiringPi.h>
+#include <wiringSerial.h>
+
+int main ()
+{
+  int fd ;
+  int count ;
+  unsigned int nextTime ;
+
+  if ((fd = serialOpen ("/dev/ttyAMA0", 115200)) < 0)
+  {
+    fprintf (stderr, "Unable to open serial device: %s\n", strerror (errno)) ;
+    return 1 ;
+  }
+
+  if (wiringPiSetup () == -1)
+  {
+    fprintf (stdout, "Unable to start wiringPi: %s\n", strerror (errno)) ;
+    return 1 ;
+  }
+
+  nextTime = millis () + 300 ;
+
+  for (count = 0 ; count < 256 ; )
+  {
+    if (millis () > nextTime)
+    {
+      printf ("\nOut: %3d: ", count) ;
+      fflush (stdout) ;
+      serialPutchar (fd, count) ;
+      nextTime += 300 ;
+      ++count ;
+    }
+
+    delay (3) ;
+
+    while (serialDataAvail (fd))
+    {
+      printf (" -> %3d", serialGetchar (fd)) ;
+      fflush (stdout) ;
+    }
+  }
+
+  printf ("\n") ;
+  return 0 ;
+}

platformio/__init__.py

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-VERSION = (2, 5, "1.dev1")
+VERSION = (2, 6, "0.dev0")
 __version__ = ".".join([str(s) for s in VERSION])
 
 __title__ = "platformio"

platformio/boards/raspberrypi.json

@@ -0,0 +1,53 @@
+{
+    "raspberrypi_1b": {
+        "build": {
+            "extra_flags": "-DRASPBERRYPI -DRASPBERRYPI1",
+            "f_cpu": "700000000L",
+            "mcu": "bcm2835"
+        },
+        "frameworks": ["wiringpi"],
+        "name": "Raspberry Pi 1 Model B",
+        "platform": "native",
+        "upload": {
+            "maximum_ram_size": 536870912,
+            "maximum_size": 536870912
+        },
+        "url": "https://www.raspberrypi.org",
+        "vendor": "Raspberry Pi"
+    },
+
+    "raspberrypi_2b": {
+        "build": {
+            "core": "esp8266",
+            "extra_flags": "-DRASPBERRYPI -DRASPBERRYPI2",
+            "f_cpu": "900000000L",
+            "mcu": "bcm2836"
+        },
+        "frameworks": ["wiringpi"],
+        "name": "Raspberry Pi 2 Model B",
+        "platform": "native",
+        "upload": {
+            "maximum_ram_size": 1073741824,
+            "maximum_size": 1073741824
+        },
+        "url": "https://www.raspberrypi.org",
+        "vendor": "Raspberry Pi"
+    },
+
+    "raspberrypi_zero": {
+        "build": {
+            "extra_flags": "-DRASPBERRYPI -DRASPBERRYPIZERO",
+            "f_cpu": "1000000000L",
+            "mcu": "bcm2835"
+        },
+        "frameworks": ["wiringpi"],
+        "name": "Raspberry Pi Zero",
+        "platform": "native",
+        "upload": {
+            "maximum_ram_size": 536870912,
+            "maximum_size": 536870912
+        },
+        "url": "https://www.raspberrypi.org",
+        "vendor": "Raspberry Pi"
+    }
+}

platformio/builder/scripts/frameworks/wiringpi.py

@@ -0,0 +1,65 @@
+# Copyright 2014-2015 Ivan Kravets <me@ikravets.com>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""
+WiringPi
+
+WiringPi is a GPIO access library written in C for the BCM2835 used in the
+Raspberry Pi. It's designed to be familiar to people who have used the Arduino
+"wiring" system.
+
+http://wiringpi.com
+"""
+
+from os.path import join
+
+from SCons.Script import DefaultEnvironment
+
+env = DefaultEnvironment()
+
+env.Replace(
+    CPPFLAGS=[
+        "-O2",
+        "-Wformat=2",
+        "-Wall",
+        "-Winline",
+        "-pipe",
+        "-fPIC"
+    ],
+
+    LIBS=["pthread"]
+)
+
+env.Append(
+    CPPDEFINES=[
+        "_GNU_SOURCE"
+    ],
+
+    CPPPATH=[
+        join("$BUILD_DIR", "FrameworkWiringPi")
+    ]
+)
+
+
+#
+# Target: Build Core Library
+#
+
+libs = []
+libs.append(env.BuildLibrary(
+    join("$BUILD_DIR", "FrameworkWiringPi"),
+    join("$PIOPACKAGES_DIR", "framework-wiringpi", "wiringPi")
+))
+
+env.Append(LIBS=libs)

platformio/builder/tools/platformio.py

@@ -46,7 +46,10 @@ def BuildProgram(env):
         env.get("BUILD_FLAGS"),
         getenv("PLATFORMIO_BUILD_FLAGS"),
     ])
-    env.BuildFramework()
+
+    if env.get("FRAMEWORK"):
+        env.BuildFrameworks([
+            f.lower().strip() for f in env.get("FRAMEWORK", "").split(",")])
 
     # build dependent libs
     deplibs = env.BuildDependentLibraries("$PROJECTSRC_DIR")
@@ -171,23 +174,26 @@ def LookupSources(env, variant_dir, src_dir, duplicate=True, src_filter=None):
     return sources
 
 
-def BuildFramework(env):
+def BuildFrameworks(env, frameworks):
-    if "FRAMEWORK" not in env or "uploadlazy" in COMMAND_LINE_TARGETS:
+    if not frameworks or "uploadlazy" in COMMAND_LINE_TARGETS:
         return
 
-    if env['FRAMEWORK'].lower() in ("arduino", "energia"):
+    board_frameworks = env.get("BOARD_OPTIONS", {}).get("frameworks")
-        env.ConvertInoToCpp()
+    if frameworks == ["platformio"]:
-
+        if board_frameworks:
-    for f in env['FRAMEWORK'].split(","):
+            frameworks.insert(0, board_frameworks[0])
-        framework = f.strip().lower()
-        if framework in env.get("BOARD_OPTIONS", {}).get("frameworks"):
-            SConscript(
-                env.subst(join("$PIOBUILDER_DIR", "scripts", "frameworks",
-                               "%s.py" % framework))
-            )
         else:
-            Exit("Error: This board doesn't support %s framework!" %
+            Exit("Error: Please specify board type")
-                 framework)
+
+    for f in frameworks:
+        if f in ("arduino", "energia"):
+            env.ConvertInoToCpp()
+
+        if f in board_frameworks:
+            SConscript(env.subst(
+                join("$PIOBUILDER_DIR", "scripts", "frameworks", "%s.py" % f)))
+        else:
+            Exit("Error: This board doesn't support %s framework!" % f)
 
 
 def BuildLibrary(env, variant_dir, src_dir, src_filter=None):
@@ -351,7 +357,7 @@ def generate(env):
     env.AddMethod(IsFileWithExt)
     env.AddMethod(VariantDirWrap)
     env.AddMethod(LookupSources)
-    env.AddMethod(BuildFramework)
+    env.AddMethod(BuildFrameworks)
     env.AddMethod(BuildLibrary)
     env.AddMethod(BuildDependentLibraries)
     return env

scripts/docspregen.py

@@ -226,6 +226,18 @@ def generate_framework(type_, data):
     print "Processing framework: %s" % type_
     lines = []
 
+    lines.append("""..  Copyright 2014-2015 Ivan Kravets <me@ikravets.com>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+""")
+
     lines.append(".. _framework_%s:" % type_)
     lines.append("")
 
@@ -248,15 +260,19 @@ Platforms
     * - Name
       - Description""")
 
+    _found_platform = False
     for platform in sorted(PlatformFactory.get_platforms().keys()):
         if not is_compat_platform_and_framework(platform, type_):
             continue
+        _found_platform = True
         p = PlatformFactory.newPlatform(platform)
         lines.append("""
     * - :ref:`platform_{type_}`
       - {description}""".format(
             type_=platform,
             description=p.get_description()))
+    if not _found_platform:
+        del lines[-1]
 
     lines.append("""
 Boards

tests/test_examples.py

@@ -28,7 +28,7 @@ def pytest_generate_tests(metafunc):
     example_dirs = normpath(join(dirname(__file__), "..", "examples"))
     project_dirs = []
     for root, _, files in walk(example_dirs):
-        if "platformio.ini" not in files:
+        if "platformio.ini" not in files or ".skiptest" in files:
             continue
         project_dirs.append(root)
     project_dirs.sort()