Re-group examples

examples/atmelavr-and-arduino/adafruit-blink/README.rst

@@ -9,7 +9,7 @@ How to buid PlatformIO based project
 .. code-block:: bash
 
     # Change directory to example
-    > cd platformio-develop/examples/digistump/digitstump-blink
+    > cd platformio-develop/examples/atmelavr-and-arduino/adafruit-blink
 
     # Process example project
     > platformio run

examples/atmelavr-and-arduino/arduino-engduino-library/src/src.pde

@@ -1,60 +0,0 @@
-#include <EngduinoLEDs.h>
-#include <EngduinoAccelerometer.h>
-#include <Wire.h>
-
-// Accelerometer demo - level
-//
-// Show a red LED on one side if we're low on that side
-// show nothing if we're high, and show green on both sides
-// if it's level(ish)
-//
-// We delay between readings because it's a bit flashy
-// otherwise - too hard to hold steady
-//
-
-void setup()
-{
-  EngduinoLEDs.begin();
-  EngduinoAccelerometer.begin();
-}
-
-void loop()
-{ float xyz[3];
-
-  // Read the acceleration
-  //
-  EngduinoAccelerometer.xyz(xyz);
-  
-  // And light the appropriate LEDs depending on whether we're level
-  // or not. The LEDs chosen are on opposite sides of the board.
-  //
-  if ((xyz[0] > 0 && xyz[0] < 0.02) || (xyz[0] < 0 && xyz[0] > -0.02)) {
-    EngduinoLEDs.setLED(12, GREEN);
-    EngduinoLEDs.setLED( 4, GREEN);
-  }
-  else if (xyz[0] > 0.02) {
-    EngduinoLEDs.setLED(12, RED);
-    EngduinoLEDs.setLED( 4, OFF);    
-  }
-  else {
-    EngduinoLEDs.setLED(12, OFF);
-    EngduinoLEDs.setLED( 4, RED);
-  }
-  
-  if ((xyz[1] > 0 && xyz[1] < 0.02) || (xyz[1] < 0 && xyz[1] > -0.02)) {
-    EngduinoLEDs.setLED( 9, GREEN);
-    EngduinoLEDs.setLED(15, GREEN);
-  }
-  else if (xyz[1] > 0.02) {
-    EngduinoLEDs.setLED( 9, RED);
-    EngduinoLEDs.setLED(15, OFF);    
-  }
-  else {
-    EngduinoLEDs.setLED( 9, OFF);
-    EngduinoLEDs.setLED(15, RED);
-  }
-  
-  // Wait 50ms, then loop
-  //
-  delay(50);
-}

examples/atmelavr-and-arduino/digitstump-mouse/README.rst

@@ -9,7 +9,7 @@ How to buid PlatformIO based project
 .. code-block:: bash
 
     # Change directory to example
-    > cd platformio-develop/examples/atmelavr-and-arduino/arduino-adafruit-blink
+    > cd platformio-develop/examples/atmelavr-and-arduino/digitstump-mouse
 
     # Process example project
     > platformio run

examples/atmelavr-and-arduino/digitstump-mouse/platformio.ini

@@ -18,16 +18,11 @@
 # targets = upload
 
 [env:digispark-tiny]
-platform = digistump
+platform = atmelavr
 framework = arduino
 board = digispark-tiny
 
 [env:digispark-pro32]
-platform = digistump
+platform = atmelavr
 framework = arduino
 board = digispark-pro32
-
-[env:digix]
-platform = digistump
-framework = arduino
-board = digix

examples/atmelavr-and-arduino/digitstump-mouse/src/Mouse.ino

@@ -0,0 +1,41 @@
+// DigiMouse test and usage documentation
+// CAUTION!!!! This does click things!!!!!!!!
+// Originally created by Sean Murphy (duckythescientist)
+
+#include <DigiMouse.h>
+
+void setup() {
+  DigiMouse.begin(); //start or reenumerate USB - BREAKING CHANGE from old versions that didn't require this
+}
+
+void loop() {
+  // If not using plentiful DigiMouse.delay(), make sure to call
+  // DigiMouse.update() at least every 50ms
+  
+  // move across the screen
+  // these are signed chars
+  DigiMouse.moveY(10); //down 10
+  DigiMouse.delay(500);
+  DigiMouse.moveX(20); //right 20
+  DigiMouse.delay(500);
+  DigiMouse.scroll(5);
+  DigiMouse.delay(500);
+  
+  // or DigiMouse.move(X, Y, scroll) works
+  
+  // three buttons are the three LSBs of an unsigned char
+  DigiMouse.setButtons(1<<0); //left click
+  DigiMouse.delay(500);
+  DigiMouse.setButtons(0); //unclick all
+  DigiMouse.delay(500);
+
+  //or you can use these functions to click
+  DigiMouse.rightClick();
+  DigiMouse.delay(500);
+  DigiMouse.leftClick();
+  DigiMouse.delay(500);
+  DigiMouse.middleClick();
+  DigiMouse.delay(500);
+
+  //for compatability with other libraries you can also use DigiMouse.move(X, Y, scroll, buttons)
+}

examples/atmelavr-and-arduino/engduino-magnetometer/README.rst

@@ -9,7 +9,7 @@ How to buid PlatformIO based project
 .. code-block:: bash
 
     # Change directory to example
-    > cd platformio-develop/examples/atmelavr-and-arduino/arduino-engduino-library
+    > cd platformio-develop/examples/atmelavr-and-arduino/engduino-magnetometer
 
     # Process example project
     > platformio run

examples/atmelavr-and-arduino/engduino-magnetometer/src/Magnetometer.ino

@@ -0,0 +1,44 @@
+#include <EngduinoMagnetometer.h>
+#include <Wire.h>
+
+// Magnetometer demo
+//
+// Print the field strength values
+//
+
+void setup()
+{ 
+  EngduinoMagnetometer.begin();
+}
+
+void loop()
+{ 
+  float magneticField[3];
+
+  // Read magnetic field strength. The values range from -20000
+  // to +20000 counts and are based on internal calibration
+  // values
+  //
+  EngduinoMagnetometer.xyz(magneticField);
+  
+  float x = magneticField[0];
+  float y = magneticField[1];
+  float z = magneticField[2];
+  Serial.print("Magnetic field strength: x = ");
+  Serial.print(x);
+  Serial.print(" counts y = ");
+  Serial.print(y);
+  Serial.print(" counts z = ");
+  Serial.print(z);
+  Serial.println(" counts");
+  
+  // Note that this is an uncalibrated temperature
+  // of the die itself. Whilst it should be a value
+  // in degrees C, the lack of calibration could mean
+  // that it's anything.
+  int8_t t = EngduinoMagnetometer.temperature();
+  Serial.print("Temperature: ");
+  Serial.println(t);
+  
+  delay(1000);
+}

examples/digistump/digitstump-blink/src/Blink.ino

@@ -1,29 +0,0 @@
-/*
-  Blink
-  Turns on an LED on for one second, then off for one second, repeatedly.
-
-  Most Arduinos have an on-board LED you can control. On the Uno and
-  Leonardo, it is attached to digital pin 13. If you're unsure what
-  pin the on-board LED is connected to on your Arduino model, check
-  the documentation at http://arduino.cc
-
-  This example code is in the public domain.
-
-  modified 8 May 2014
-  by Scott Fitzgerald
- */
-
-
-// the setup function runs once when you press reset or power the board
-void setup() {
-  // initialize digital pin 13 as an output.
-  pinMode(13, OUTPUT);
-}
-
-// the loop function runs over and over again forever
-void loop() {
-  digitalWrite(13, HIGH);   // turn the LED on (HIGH is the voltage level)
-  delay(1000);              // wait for a second
-  digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW
-  delay(1000);              // wait for a second
-}