qt-creator/doc/api/first-plugin.qdoc

/**************************************************************************
**
** Copyright (C) 2015 The Qt Company Ltd.
** Contact: http://www.qt.io/licensing
**
** This file is part of Qt Creator
**
**
** GNU Free Documentation License
**
** Alternatively, this file may be used under the terms of the GNU Free
** Documentation License version 1.3 as published by the Free Software
** Foundation and appearing in the file included in the packaging of this
** file.
**
**
**************************************************************************/

/*!
    \page first-plugin.html
    \title Creating Your First Plugin

    This section describes how to create a \QC plugin by using the plugin
    template provided by \QC, and get the first impression of what a plugin
    consists of and what its general structure is.

    \section1 Creating a Plugin Project

    \QC comes with a wizard for \QC plugins, that creates a runable, \e minimal
    plugin for you. We strongly suggest that you use two different \QC instances
    for developing and testing your plugin with. Otherwise your plugin will also
    be loaded in your development environment, which can make that unstable
    while your plugin is still unstable. You can just create a copy of your \QC
    build and use one for actually developing, and the other for testing your
    plugin with.

    You need to make sure that you use the same \QC version that you want to
    develop for to create the plugin. Because of the \l{Binary and Source
    Compatibility} rules of \QC, the \QC plugin wizard creates a plugin that
    might only compile and run with the same \QC version that it was created
    with.

    \list 1
        \li Select \uicontrol File > \uicontrol {New File or Project} >
            \uicontrol Library > \uicontrol {Qt Creator Plugin} >
            \uicontrol Choose.

            \image firstplugin-wizard.png "Choose the \QC Plugin Wizard"

            The \uicontrol{Introduction and Project Location} dialog opens.

            \image firstplugin-nameandpath.png "Choose Name and Place of the Project"

        \li Give your project a name and specify in which path this project will
            be created. The actual plugin's name can be different from the
            project name. You will choose that name later in the wizard.
            Continue to the next page.

            The \uicontrol {Kit Selection} dialog opens.

            \image firstplugin-kitselection.png "Choose the kit to build and run your project with"

        \li Select the \l{glossary-buildandrun-kit}{kit} to build and run your
            project with. For a \QC plugin this needs to be a kit with
            \uicontrol Desktop device type, and a Qt version that is compatible
            with the Qt version that your \QC was built with (in the best case
            the exact same build). If you use an incompatible Qt version to
            build your plugin, you will get errors while \QC tries to load your
            plugin. Continue to the next page.

            The \uicontrol {Plugin Information} dialog opens.

            \image firstplugin-pluginsetup.png "Specify Your Plugin Details"

        \li In the \uicontrol {Plugin name} field, type \uicontrol Example. The
            name of the plugin is used as its identifier, and also is the base
            for the file names and classes in the code.

        \li The values of the following fields are mainly informational, and
            are shown in the detailed view in \QC's plugin overview
            (\uicontrol Help > \uicontrol {About Plugins}, or
            \uicontrol {Qt Creator} > \uicontrol {About Plugins} on Mac).

            \list
                \li \uicontrol {Vendor name} is a short one-word name of the
                    company or organization that created the plugin. This is
                    also used for the path name where the plugin will be
                    deployed to.

                \li \uicontrol Copyright is a one-line, short copyright string.

                \li \uicontrol License is a multi-line license text (but
                    shouldn't be pages over pages long, since the interface
                    doesn't allow nice reading of long texts).

                \li \uicontrol{Description} is a relatively short, but possibly
                    multi-line description of what the plugin does.

                \li \uicontrol URL is a website where the user can find more
                    information about the plugin and/or organization providing
                    it.
           \endlist

        \li Set the \uicontrol {Qt Creator sources} and
            \uicontrol{Qt Creator build} fields to the source and build
            directory of the \QC instance you want to use to test your plugin
            with, respectively. If you don't do that correctly you will get
            compile errors for your plugin, and your plugin might not show up in
            \QC at all.

        \li In the \uicontrol {Deploy into} list, select
            \uicontrol {Qt Creator build}. This sets your \c {.pro} file up to
            deploy your plugin directly into your \QC build's plugin directory
            (requires you to have write permissions there). The other option,
            \uicontrol {Local user settings}, sets your \c {.pro} file up to
            deploy your plugin into \QC's user plugin path (for example
            \c {~/.config/QtProject/qtcreator/plugins} on Unix systems). We
            choose \uicontrol {Qt Creator build} because we use a self-compiled
            \QC, and want the plugin to be only loaded by that \QC
            instance. Continue to the next page.

            The \uicontrol {Project Management} dialog opens.

            \image firstplugin-summary.png "Summary of Created Files"

        \li Review the files that will be created, choose a version control
            system that \QC should use for your project (always a good idea!),
            and finish the wizard.
    \endlist

    \section1 Building and Running the Plugin

    If you passed the correct \QC source and build paths in the project wizard,
    your plugin should just build fine when pressing the build button. When you
    try to run your project, \QC will ask you for the executable to run and you
    are presented the following dialog:

    \image firstplugin-runsettings.png "Specify the Executable to Run"

    Select the path to the \QC executable from the build that you specified in
    the \uicontrol {Qt Creator build} setting in the project wizard and click
    \uicontrol OK. \QC starts up, and you can verify that your plugin
    successfully loaded by looking for a menu entry \uicontrol Tools >
    \uicontrol Example and by looking for the plugin in the
    \uicontrol {About Plugins} dialog.

    \image firstplugin-menuitem.png "Menu Registered by the Plugin"

    \section1 File Structure

    The plugin wizard creates a set of basic files that a plugin needs or should
    have. We will have a look at some of them in detail in the following
    sections, here is a short overview:

    \table
    \header
        \li File

        \li Role
    \row
        \li \c {Example.json.in}

        \li Plugin meta data template. QMake creates an \c {Example.json}
            from this file, which is compiled into the plugin as meta data.
            The meta data is read by \QC to find out about the plugin.
    \row
        \li \c {example.pro}

        \li Project file, used by QMake to generate a Makefile that then is used to
            build the plugin.
    \row
        \li \c {example_global.h}

        \li Contains macro definitions that are useful when this plugin should export
            symbols to other plugins.
    \row
        \li \c {exampleconstants.h}

        \li Header defining constants used by the plugin code.
    \row
        \li \c{exampleplugin.h/.cpp}

        \li C++ header and source files that define the plugin class that will be
            instanciated and run by \QC's plugin manager.
    \endtable

    \section1 qmake Project

    The qmake project file \c {example.pro} defines how your plugin should be
    compiled. \QC plugins need to have a specific setup there, in addition to
    telling qmake which files need to be compiled (or handled by \c moc or
    \c uic). Let us have a look at what the project wizard generated for you in
    detail.

    \snippet exampleplugin/example.pro 1

    The first section of the .pro file lets the compiler pass an
    \c EXAMPLE_LIBRARY define to the compiled code, which is used in the
    \c {example_global.h} header, but is not really of interest for now. You
    should not need to change that section of the \c {.pro} file.

    \snippet exampleplugin/example.pro 2

    This section tells qmake about the files of your project that it should let
    compile or otherwise handle. You need to expand that section with any files
    you add to the project.

    \snippet exampleplugin/example.pro 3

    To compile and deploy your plugin, the project needs access to the \QC
    sources and build. This section contains the logic that looks for the
    information about the location of the sources and build in the
    \c {QTC_SOURCE} and \c {QTC_BUILD} environment variables. If these are not
    defined, it uses the defaults you set in the project wizard.

    So, if someone else opens your plugin project on their machine, they do not
    need to edit the .pro file, but instead they should set the \c {QTC_SOURCE}
    and \c {QTC_BUILD} environment variables correctly for the plugin's build
    environment.

    You should not need to change this section, except perhaps to adapt the
    defaults.

    \snippet exampleplugin/example.pro 4

    \QC plugins can either be installed into the \QC installation's plugin
    directory (requires write access there), or to a user specific plugin
    directory. The \c USE_USER_DESTDIR switch in the .pro file defines which
    method is used for building the plugin (which is independent from what you
    can later use for distributing your plugin to other users).

    \snippet exampleplugin/example.pro 5

    This section defines the name and dependencies of your plugin. The
    \c {QTC_PLUGIN_NAME} variable defines the name of your plugin, and the name
    of the dynamic library that is created for it. The \c {QTC_LIB_DEPENDS}
    variable is a list of library names of the \QC utility libraries that your
    plugin depends on. Typical values would be \c aggregation,
    \c extensionsystem and \c utils. The \c {QTC_PLUGIN_DEPENDS} variable
    defines the \QC plugins that your plugin depends on. Almost all \QC plugins
    will depend on the \c coreplugin. The \c {QTC_PLUGIN_RECOMMENDS} variable
    defines the \QC plugins that your plugin optionally depends on. For more
    information, see \l{Optional Dependencies}.

    \snippet exampleplugin/example.pro 6

    The included file \c{qtcreatorplugin.pri} makes sure that you build a plugin
    that is suitable for use in \QC, by using the information you gave above.

    For more information about qmake, and writing \c {.pro} files in general,
    see the \l{qmake Manual}.

    \section1 Plugin Meta Data Template

    The \c {.json} file is a JSON file that contains information that is needed
    by the plugin manager to find your plugin and resolve its dependencies
    before actually loading your plugin's library file. We will only have a
    short look at it here. For more information, see \l{Plugin Meta Data}.

    The wizard doesn't actually create a .json file directly, but instead a
    \c {.json.in} file. qmake uses this to generate the actual plugin .json
    meta data file, replacing variables like \c {QTCREATOR_VERSION} with their
    actual values. Therefore you need to escape all backslashes and quotes in
    the \c {.json.in} file (i.e. you need to write \c {\} to get a backslash
    and \c{\"} to get a quote in the generated plugin JSON meta data).

    \snippet exampleplugin/Example.json.in 1

    The first items in the meta data that is created by the wizard define the
    name of your plugin, its version, and with what version of this plugin the
    current version is binary compatible with.

    \snippet exampleplugin/Example.json.in 2

    After that you'll find the information about the plugin that you gave in the
    project wizard.

    \snippet exampleplugin/Example.json.in 3

    The \c {$$dependencyList} variable is automatically replaced by the
    dependency information in \c {QTC_PLUGIN_DEPENDS} and
    \c {QTC_PLUGIN_RECOMMENDS} from your plugin's \c {.pro} file.

    \section1 Plugin Class

    The files \c {exampleplugin.h} and \c {exampleplugin.cpp} define the plugin
    implementation of your little plugin. We'll concentrate on some highlights
    here, and give pointers to more detailed information for the various parts.

    \section2 Header File

    The header file \c {exampleplugin.h} defines the interface of the plugin
    class.

    \snippet exampleplugin/exampleplugin.h namespaces

    The plugin is defined in a \c {Example::Internal} namespace, which conforms
    to the coding rules for \l{coding-rules-namespacing}{namespacing}
    in \QC sources.

    \snippet exampleplugin/exampleplugin.h base class

    All \QC plugins must be derived from \l{ExtensionSystem::IPlugin} and
    are QObjects. The \c {Q_PLUGIN_METADATA} macro is necessary to create a
    valid Qt plugin. The \c IID given in the macro must be
    \c {org.qt-project.Qt.QtCreatorPlugin}, to identify it as a \QC plugin, and
    \c FILE must point to the plugin's meta data file as described in
    \l{Plugin Meta Data}.

    \snippet exampleplugin/exampleplugin.h plugin functions

    The base class defines basic functions that are called during the life cycle
    of a plugin, which are here implemented for your new plugin. These functions
    and their roles are described in detail in \l{The Plugin Life Cycle}.

    \snippet exampleplugin/exampleplugin.h slot

    The plugin has an additional custom slot, that is used to pop up a dialog
    when the user chooses the menu item that this plugin adds.

    \section2 Source File

    The source file contains the actual implementation of the plugin, which
    registers a new menu and menu item, and opens a message box when that item
    is triggered.

    All the necessary header files from the plugin code itself, from the \c
    Core plugin, and from Qt are included in the beginning of the file. The
    setup of the menu and menu item is done in the plugin's \c initialize
    function, which is the first thing called after the plugin constructor. In
    that function, the plugin can be sure that the basic setup of plugin's that
    it depends on has been done, for example the Core plugin's \c ActionManager
    instance has been created.

    For more information about implementing the plugin interface, see the
    \l{ExtensionSystem::IPlugin} API documentation and \l{Plugin Life Cycle}.

    \snippet exampleplugin/exampleplugin.cpp add action

    This part of the code creates a new \c QAction, registers it as a new
    \c Command in the action manager, and connects it to the plugin's slot. The
    action manager provides a central place where the user can assign and change
    keyboard shortcuts, and manages cases where for example a menu item should
    be directed to different plugins under different circumstances, as well as a
    few other things. This is described in more detail in
    \l{Menus and Menu Items}.

    \snippet exampleplugin/exampleplugin.cpp add menu

    Here a new menu item is created, the created command added to it, and the
    menu added to the \uicontrol Tools menu in the menu bar. Again, this is
    covered in more detail in \l{Menus and Menu Items}.

    \snippet exampleplugin/exampleplugin.cpp slot implementation

    This part defines the code that is called when the menu item is triggered.
    It uses the Qt API to open a message box that displays informative text and
    an \uicontrol OK button.
*/