Doc: Make the instructions for enabling plugins more consistent

- Add the following for documented plugins that are
  disabled by default: \note Enable the <name> plugin to use it
- Add \sa {Enable and disable plugins} for the above plugins and
  describe there how to find the About Plugins dialog on macOS
- For the one occurrence in the QDS Manual, add instructions for
  finding the About Plugins dialog on macOS ("Enable and disable plugins"
  is not included in the QDS Manual
- Mostly remove other kinds of references to enabling plugins

Task-number: QTCREATORBUG-29734
Change-Id: I7b12bd651c1c99e0c6b3ca6f94d3831ebe038438
Reviewed-by: Eike Ziller <eike.ziller@qt.io>

doc/qtcreator/src/analyze/creator-axivion.qdoc

@@ -25,6 +25,8 @@
     The experimental Axivion plugin integrates the Axivion dashboard server into
     \QC.
 
+    \note Enable the Axivion plugin to use it.
+
     To use the plugin, you must set up a project in the Axivion dashboard
     server and link to it from \QC. You can then see style violations in the
     \uicontrol Edit mode and descriptions and issue counts in the
@@ -44,16 +46,6 @@
     To view the issue counts, select \inlineimage icons/home.png
     (\uicontrol {Show Dashboard}).
 
-    \section1 Enabling the Axivion Plugin
-
-    To enable the Axivion plugin:
-
-    \list 1
-        \li Select \uicontrol Help > \uicontrol {About Plugins} >
-            \uicontrol {Code Analyzer} > \uicontrol Axivion to enable the plugin.
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-    \endlist
-
     \section1 Connecting to Axivion Dashboard Servers
 
     To connect to Axivion:
@@ -106,4 +98,6 @@
 
     To clear the view, select \inlineimage icons/clean_pane_small.png
     (\uicontrol Clear).
+
+    \sa {Enable and disable plugins}
 */

doc/qtcreator/src/analyze/creator-coco.qdoc

@@ -42,15 +42,7 @@
 
     To use the plugin, you must download and install Coco.
 
-    \section1 Enabling the Coco Plugin
+    \note Enable the Coco plugin to use it.
-
-    To enable the Coco plugin:
-
-    \list 1
-        \li Select \uicontrol Help > \uicontrol {About Plugins} >
-            \uicontrol Utilities > \uicontrol Coco to enable the plugin.
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-    \endlist
 
     \section1 Configuring Coco
 
@@ -93,5 +85,5 @@
         \li Implicit Manual Coverage Validation
     \endlist
 
-    For more information, see \l{Specifying Text Editor Settings}.
+    \sa {Enable and disable plugins}, {Specifying Text Editor Settings}
 */

doc/qtcreator/src/analyze/creator-cppcheck.qdoc

@@ -15,20 +15,12 @@
     The experimental Cppcheck Diagnostics plugin integrates diagnostics
     that are generated by the Cppcheck tool into the C++ editor.
 
+    \note Enable the Cppcheck plugin to use it.
+
     Cppcheck is automatically run on open files. To select the files to
     check in the currently active project, select \uicontrol Analyze >
     \uicontrol Cppcheck.
 
-    \section1 Enabling the Cppcheck Plugin
-
-    To enable the Cppcheck plugin:
-
-    \list 1
-        \li Select \uicontrol Help > \uicontrol {About Plugins} >
-            \uicontrol {Code Analyzer} > \uicontrol Cppcheck to enable the
-            plugin.
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-    \endlist
 
     \section1 Running Cppcheck on Selected Files
 
@@ -74,4 +66,6 @@
     To specify the settings above for the automatically run checks,
     select \preferences > \uicontrol Analyzer
     > \uicontrol Cppcheck.
+
+    \sa {Enable and disable plugins}
 */

doc/qtcreator/src/baremetal/creator-baremetal-dev.qdoc

@@ -54,18 +54,7 @@
     ST-Link and J-Link debug server providers can be used together with
     the \l {uVision IDE}.
 
-    \section1 Enabling the Bare Metal Device Plugin
+    \note Enable the Bare Metal plugin to use it.
-
-    To enable the Bare Metal Device plugin:
-
-    \list 1
-
-        \li Select \uicontrol Help > \uicontrol {About Plugins} >
-            \uicontrol {Device Support} > \uicontrol {Bare Metal}.
-
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-
-    \endlist
 
     \section1 Specifying Settings for Debug Server Providers
 
@@ -273,4 +262,6 @@
     You can build applications for and run them on bare metal devices
     in the same way as for and on the desktop. For more information, see
     \l{Building for Multiple Platforms} and \l{Running on Multiple Platforms}.
+
+    \sa {Enable and disable plugins}
 */

doc/qtcreator/src/conan/creator-projects-conan.qdoc

@@ -35,9 +35,7 @@
     your operating system has. For example, on Windows, you can use the
     \c {choco install conan} or \c {pip install conan} command.
 
-    To enable the experimental Conan plugin, select \uicontrol Help >
+    \note Enable the Conan plugin to use it.
-    \uicontrol {About Plugins} > \uicontrol Utilities > \uicontrol Conan.
-    Then select \uicontrol {Restart Now} to restart \QC and load the plugin.
 
     For each project, you must write a
     \l{https://docs.conan.io/en/latest/reference/conanfile.html}{conanfile.py}
@@ -49,4 +47,6 @@
 
     Alternatively, you can automatically set up the Conan package manager for
     use with CMake. For more information, see \l{Using CMake with Conan}.
+
+    \sa {Enable and disable plugins}
 */

doc/qtcreator/src/editors/creator-coding.qdoc

@@ -107,7 +107,7 @@
             You can use \QC to create applications that embed state machines. A
             project wizard creates \l{https://www.w3.org/TR/scxml/}
             {State Chart XML (SCXML)} files with boilerplate code that you can
-            edit using an experimental SCXML editor. You can use the classes in
+            edit using an SCXML editor. You can use the classes in
             the Qt SCXML module to embed state machines created from the files
             in Qt applications.
 

doc/qtcreator/src/editors/creator-only/creator-beautifier.qdoc

@@ -32,6 +32,12 @@
     specified in the Beautifier preferences. You can use a predefined style or
     define your own style.
 
+    \note Enable the Beautifier plugin to use it. Since \QC 10.0.0, the
+    ClangFormat plugin is enabled by default. Select \preferences >
+    \uicontrol {C++} > \uicontrol {Formatting mode} > \uicontrol Disable
+    to turn off ClangFormat if you enable Beautifier because combining
+    them can lead to unexpected results.
+
     To use the Beautifier plugin:
 
     \list 1
@@ -48,17 +54,6 @@
 
             You might have to build the tools from sources for some platforms.
 
-        \li Select \uicontrol Help > \uicontrol {About Plugins} > \uicontrol {C++} >
-            \uicontrol Beautifier to enable the plugin.
-
-            \note Since \QC 10.0.0, the ClangFormat plugin is enabled by
-            default. Select \preferences >
-            \uicontrol {C++} > \uicontrol {Formatting mode} > \uicontrol Disable
-            to turn off ClangFormat if you enable Beautifier because combining
-            them can lead to unexpected results.
-
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-
         \li Select \preferences >
             \uicontrol Beautifier to specify settings for beautifying files.
 
@@ -168,4 +163,6 @@
     select it when no text is selected, the whole file is formatted by default.
     To disable this behavior, deselect the
     \uicontrol {Format entire file if no text was selected} check box.
+
+    \sa {Enable and disable plugins}
 */

doc/qtcreator/src/editors/creator-only/creator-compilation-database.qdocinc

@@ -25,6 +25,8 @@
     the files in a compilation database with access to all the editing features
     of the Clang code model.
 
+    \note Enable the Compilation Database Project Manager plugin to use it.
+
     To switch between header and source files, select \uicontrol Tools >
     \uicontrol C++ > \uicontrol {Switch Header/Source}.
 
@@ -32,9 +34,7 @@
     database projects in the \uicontrol Projects mode. For more information,
     see \l{Adding Custom Build Steps} and \l {Specifying Run Settings}.
 
-    To enable the plugin, select \uicontrol Help > \uicontrol {About Plugins} >
+    \sa {Enable and disable plugins}
-    \uicontrol {Build Systems} > \uicontrol {Compilation Database Project Manager}.
-    Then select \uicontrol {Restart Now} to restart \QC and load the plugin.
 
 //! [using compilation databases]
 */

doc/qtcreator/src/editors/creator-only/creator-copilot.qdoc

@@ -31,17 +31,6 @@
             {Copilot.vim/Readme.md}.
     \endlist
 
-    \section1 Enabling the Copilot Plugin
-
-    To enable the Copilot plugin:
-
-    \list 1
-        \li Select \uicontrol Help (or \uicontrol {\QC} on \macos) >
-            \uicontrol {About Plugins} > \uicontrol Utilities >
-            \uicontrol Copilot to enable the plugin.
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-    \endlist
-
     \section1 Setting Copilot Preferences
 
     To set preferences for using Copilot:
@@ -117,4 +106,6 @@
     select \uicontrol Projects > \uicontrol {Project Settings} >
     \uicontrol Copilot, and then select or deselect the
     \uicontrol {Enable Copilot} check box.
+
+    \sa {Enable and disable plugins}
 */

doc/qtcreator/src/editors/creator-only/creator-scxml.qdoc

@@ -22,12 +22,11 @@
     \e event, but also on earlier events. With state charts, you
     can easily share this information.
 
-    \QC has a project wizard for adding \l{https://www.w3.org/TR/scxml/}
+    With the \QC project wizard you can add \l{https://www.w3.org/TR/scxml/}
-    {State Chart XML (SCXML)} files with boilerplate code to projects and an
+    {State Chart XML (SCXML)} files with boilerplate code to projects. Edit
-    experimental SCXML editor for editing the state charts. You can use the
+    the state charts with the SCXML editor to add \e states and \e transitions
-    SCXML editor to add \e states and \e transitions to the files. You can then
+    to the files. Then, use the classes in the Qt SCXML module to embed the
-    use the classes in the Qt SCXML module to embed the state machines created
+    state machines created from the files in Qt applications.
-    from the files in Qt applications.
 
     \image qtcreator-scxml-editor.png SXCML Editor
 
@@ -83,11 +82,6 @@
 
     \list 1
 
-        \li Select \uicontrol Help > \uicontrol {About Plugins} >
-            \uicontrol Modeling > \uicontrol ScxmlEditor.
-
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-
         \li Select \uicontrol File > \uicontrol {New File} >
             \uicontrol {Files and Classes} > \uicontrol Modeling >
             \uicontrol {State Chart} > \uicontrol Choose to create an empty

doc/qtcreator/src/editors/creator-search.qdoc

@@ -219,7 +219,9 @@
     \section1 Enabling Silver Searcher
 
     You can use Silver Searcher as a search engine in \QC if you install
-    Silver Searcher on the development PC and enable the experimental plugin.
+    Silver Searcher on the development PC.
+
+    \note Enable the SilverSearcher plugin to use it.
 
     To use Silver Searcher:
 
@@ -232,12 +234,6 @@
             You might have to build Silver Searcher from sources for some
             platforms.
 
-        \li Select \uicontrol Help > \uicontrol {About Plugins} >
-            \uicontrol {Utilities} > \uicontrol {SilverSearcher} to enable the
-            plugin.
-
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-
         \li When searching, select \uicontrol {Silver Searcher} in the
             \uicontrol {Search engine} field.
 
@@ -248,5 +244,7 @@
             and add the entry \c{PATH=/path/to/bin:${PATH}}.
 
     \endlist
+
+    \sa {Enable and disable plugins}
     \endif
 */

doc/qtcreator/src/howto/creator-keyboard-shortcuts.qdoc

@@ -453,7 +453,11 @@
     You can specify shortcuts for executing actions in a way that is familiar to
     \l{https://www.gnu.org/software/emacs/manual/html_node/emacs/index.html}
     {Emacs} editor users. The actions are not bound to any key combinations by
-    default. The following actions are available:
+    default.
+
+    \note Enable the EmacsKeys plugin to use the shortcuts.
+
+    The following actions are available:
 
     \list
         \li Copy
@@ -790,7 +794,11 @@
     \endif
 
     \sa {Assign keyboard shortcuts}, {Find keyboard shortcuts},
-        {Import and export keyboard shortcuts}
+    {Import and export keyboard shortcuts}
+
+    \if defined(qtcreator)
+    \sa {Enable and disable plugins}
+    \endif
 */
 
 /*!

doc/qtcreator/src/howto/creator-only/creator-how-to-enable-plugins.qdoc

@@ -9,6 +9,18 @@
 
     \title Enable and disable plugins
 
+    \QC uses standard names and locations on Linux, \macos, and Windows for
+    standard features, such as \e about dialogs.
+
+    \table
+        \header
+            \li Linux and Windows
+            \li \macos
+        \row
+            \li \uicontrol Help > \uicontrol {About Plugins}
+            \li \uicontrol {\QC} > \uicontrol {About Plugins}
+    \endtable
+
     New \QC plugins are often introduced as \e {experimental plugins} to let you
     try them out before they are fully supported. Experimental plugins are
     disabled by default and you must enable them for them to become visible
@@ -24,7 +36,7 @@
     To enable and disable plugins:
 
     \list 1
-        \li Select \uicontrol Help > \uicontrol {About Plugins}.
+        \li Go to \uicontrol {About Plugins}.
         \li Start typing in the \uicontrol Filter field to find a plugin.
             \image qtcreator-installed-plugins.webp {Installed Plugins dialog}
         \li Select the \uicontrol Load check box to enable a plugin, or deselect
@@ -34,5 +46,5 @@
             take effect.
     \endlist
 
-    \sa {Install plugins}{How To: Install plugins}
+    \sa {Install plugins}
 */

doc/qtcreator/src/howto/creator-only/creator-how-to-install-plugins.qdoc

@@ -22,8 +22,7 @@
     To install plugins:
 
     \list 1
-        \li Select \uicontrol Help > \uicontrol {About Plugins} >
+        \li Go to \uicontrol {About Plugins} > \uicontrol {Install Plugins}.
-            \uicontrol {Install Plugins}.
         \li In the \uicontrol Source dialog, enter the path to the archive
             or library that has the plugin.
             \image qtcreator-install-plugin-source.png
@@ -39,5 +38,5 @@
         \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
     \endlist
 
-    \sa {Enable and disable plugins}{How To: Enable and disable plugins}
+    \sa {Enable and disable plugins}
 */

doc/qtcreator/src/howto/creator-only/creator-squish.qdoc

@@ -42,15 +42,7 @@
     To use the plugin, you must download and install Squish, create a connection
     to the Squish Server, and specify AUTs to run.
 
-    \section1 Enabling the Squish Plugin
+    \note Enable the Squish plugin to use it.
-
-    To enable the Squish plugin:
-
-    \list 1
-        \li Select \uicontrol Help > \uicontrol {About Plugins} >
-            \uicontrol Utilities > \uicontrol Squish to enable the plugin.
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-    \endlist
 
     \section1 Specifying a Squish Server
 
@@ -328,4 +320,6 @@
     output, \uicontrol {Runner/Server Log} tab.
 
     \image qtcreator-squish-output-runner-server-log.png "Runner and Server Log output"
+
+    \sa {Enable and disable plugins}
 */

doc/qtcreator/src/howto/creator-only/creator-vcpkg.qdoc

@@ -18,15 +18,7 @@
     You can use \QC to create and edit vcpkg.json files to specify packages to
     build as part of your project when using CMake as the build system.
 
-    \section1 Enabling the vcpkg Plugin
+    \note Enable the Vcpkg plugin to use it.
-
-    To enable the vcpkg plugin:
-
-    \list 1
-        \li Select \uicontrol Help > \uicontrol {About Plugins} >
-            \uicontrol Utilities > \uicontrol Vcpkg to enable the plugin.
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-    \endlist
 
     \section1 Setting vcpkg Preferences
 
@@ -86,4 +78,6 @@
     To set the path to the directory where you installed vcpkg, select
     \inlineimage icons/settings.png
     (\uicontrol Configure) on the editor toolbar.
+
+    \sa {Enable and disable plugins}
 */

doc/qtcreator/src/howto/creator-telemetry.qdoc

@@ -34,7 +34,9 @@
     {Enable Usage Statistics} in the splash screen that appears when you first
     launch \QDS. If the splash screen does not appear, you can enable the
     telemetry plugin by selecting \uicontrol Help > \uicontrol {About Plugins} >
-    \uicontrol Utilities > \uicontrol UsageStatistic.
+    \uicontrol Utilities > \uicontrol UsageStatistic on Linux and Windows (or
+    \uicontrol {\QDS} > \uicontrol {About Plugins} > \uicontrol Utilities >
+    \uicontrol UsageStatistic on \macos).
     \image studio-usage-statistics.png "Enabling Usage Statistics"
     \endif
 

doc/qtcreator/src/meson/creator-projects-meson.qdoc

@@ -23,8 +23,7 @@
     \c PATH. You can add paths to other Meson or Ninja executables and use them
     in different build and run \l{glossary-buildandrun-kit}{kits}.
 
-    \note Meson build plugin is disabled by default, see
+    \note Enable the Meson plugin to use it.
-    \l{Enable and disable plugins}{How To: Enable and disable plugins}.
 
     \section1 Adding Meson Tools
 
@@ -86,5 +85,6 @@
         \li Adding files to Meson projects from \QC.
     \endlist
 
-    \sa {Open projects}, {Meson Build Configuration}, {Specifying Run Settings}
+    \sa {Enable and disable plugins}, {Open projects},
+    {Meson Build Configuration}, {Specifying Run Settings}
 */

doc/qtcreator/src/projects/creator-only/creator-projects-autotools.qdoc

@@ -12,11 +12,9 @@
     \brief \QC can open projects that use the Autotools build system. You can
     build and run the projects directly from \QC.
 
-    The AutotoolsProjectManager is a plugin for autotools support. It is
+    The AutotoolsProjectManager is a plugin for autotools support.
-    disabled by default. To enable the plugin, select \uicontrol Help >
+
-    \uicontrol {About Plugins} > \uicontrol {Build Systems} >
+    \note Enable the Autotools plugin to use it.
-    \uicontrol AutotoolsProjectManager. Then select \uicontrol {Restart Now}
-    to restart \QC and load the plugin.
 
     To work with your Autotools project in \QC:
 
@@ -47,4 +45,6 @@
 
             \image qtcreator-autotools-buildsettings.png
     \endlist
+
+    \sa {Enable and disable plugins}
 */

doc/qtcreator/src/projects/creator-only/creator-projects-nimble.qdoc

@@ -17,10 +17,7 @@
     \l{https://nim-lang.org/}{Nim} and uses the Nim compiler to generate
     executables that are supported on Windows, Linux, and \macos.
 
-    To use \QC for Nim development, you need to enable the experimental
+    \note Enable the Nim plugin to use Nimble and Nim.
-    Nim plugin. Select \uicontrol Help > \uicontrol {About Plugins} >
-    \uicontrol {Other Languages} > \uicontrol Nim. Then select
-    \uicontrol {Restart Now} to restart \QC and load the plugin.
 
     In addition, you have to download and install Nim and set up a Nim kit
     in \QC.
@@ -62,4 +59,6 @@
             \image qtcreator-project-nimble.png
         \li Select \uicontrol Next to create the project.
     \endlist
+
+    \sa {Enable and disable plugins}
 */

doc/qtcreator/src/qtquick/creator-only/qtquick-designer-plugin.qdoc

@@ -21,13 +21,5 @@
 
     For more information about using \QMLD, see \l{Qt Design Studio Manual}.
 
-    \section1 Enabling the \QMLD Plugin
+    \sa {Enable and disable plugins}
-
-    To enable the \QMLD plugin:
-
-    \list 1
-        \li Select \uicontrol Help > \uicontrol {About Plugins} >
-            \uicontrol {Qt Quick} > \uicontrol {QmlDesigner}.
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-    \endlist
 */

doc/qtcreator/src/user-interface/creator-only/creator-reference-to-do-entries-view.qdoc

@@ -9,6 +9,8 @@
 
     \title To-Do Entries
 
+    \note Enable the Todo plugin to use it.
+
     \brief Lists the BUG, FIXME, NOTE, TODO, and WARNING keywords from the
     current file, from all project files, or from a subproject.
 
@@ -21,17 +23,6 @@
     analysis tools in \l Issues. For more information, see
     \l{Show task list files in Issues}.
 
-    \section1 Enabling the To-Do Plugin
-
-    The Todo plugin is disabled by default. To enable it:
-
-    \list 1
-        \li Select \uicontrol Help > \uicontrol {About Plugins} >
-            \uicontrol Utilities > \uicontrol Todo.
-        \li Select \uicontrol OK.
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-    \endlist
-
     \section1 To-Do Preferences
 
     To add keywords, select \preferences >

doc/qtcreator/src/vcs/creator-only/creator-vcs-gitlab.qdoc

@@ -15,16 +15,13 @@
     GitLab servers and use \l{Git} to manage your local and remote
     repositories.
 
-    To enable the experimental GitLab plugin, select \uicontrol Help >
-    \uicontrol {About Plugins} > \uicontrol {Version Control} >
-    \uicontrol GitLab. Then select \uicontrol {Restart Now} to
-    restart \QC and load the plugin.
-
     To use GitLab, you must create a connection to the GitLab server and clone
     the projects you want to work on. You can also link previously cloned
     projects to GitLab in the project settings. This enables you to receive
     event notifications in the \l {View output}{Version Control} pane.
 
+    \note Enable the GitLab plugin to use it.
+
     \section1 Connecting to GitLab Servers
 
     To connect to a GitLab server, you need to specify the server host name and
@@ -125,6 +122,6 @@
     To stop the reception of event notifications, select
     \uicontrol {Unlink from GitLab}.
 
-    \sa {Set up version control systems}, {Use common VCS functions},
+    \sa {Enable and disable plugins}, {Set up version control systems},
-    {Version Control Systems}, {Git}
+    {Use common VCS functions}, {Version Control Systems}, {Git}
 */

doc/qtcreator/src/vcs/creator-only/creator-vcs-perforce.qdoc

@@ -20,15 +20,7 @@
     Perforce is a fast software configuration management system developed by
     Perforce Software.
 
-    \section1 Enabling the Perforce Plugin
+    \note Enable the Perforce plugin to use it.
-
-    To enable the Perforce plugin:
-
-    \list 1
-        \li Select \uicontrol Help > \uicontrol {About Plugins} >
-        \uicontrol {Version Control} > \uicontrol Perforce.
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-    \endlist
 
     \section1 Configuring Perforce
 
@@ -69,6 +61,6 @@
     To view information about change lists and the files in them, select
     \uicontrol Tools > \uicontrol Perforce > \uicontrol Describe.
 
-    \sa {Set up version control systems}, {Use common VCS functions},
+    \sa {Enable and disable plugins}, {Set up version control systems},
-    {Version Control Systems}
+    {Use common VCS functions}, {Version Control Systems}
 */

doc/qtcreator/src/vcs/creator-only/creator-vcs.qdoc

@@ -35,21 +35,15 @@
         \row
             \li \l{ClearCase}
             \li \l{http://www-01.ibm.com/software/awdtools/clearcase/}
-            \li Disabled by default. To enable the plugin, select
+            \li Enable the plugin to use it.
-                \uicontrol Help > \uicontrol {About Plugins} >
-                \uicontrol {Version Control} > \uicontrol ClearCase.
-                Then select \uicontrol {Restart Now} to restart \QC
-                and load the plugin.
         \row
             \li \l{CVS}
             \li \l{http://www.nongnu.org/cvs/}
-            \li
+            \li Enable the plugin to use it.
         \row
             \li \l{Fossil}
             \li \l{https://fossil-scm.org/index.html/doc/trunk/www/index.wiki}
-            \li Disabled by default. To enable the plugin, select
+            \li Enable the plugin to use it.
-                \uicontrol Help > \uicontrol {About Plugins} >
-                \uicontrol {Version Control} > \uicontrol Fossil.
              \row
             \li \l{Git}
             \li \l{http://git-scm.com/}
@@ -59,7 +53,7 @@
         \row
             \li \l{GitLab}
             \li \l{http://gitlab.com/}
-            \li Experimental
+            \li Enable the plugin to use it.
         \row
             \li \l{Mercurial}
             \li \l{http://mercurial.selenic.com/}
@@ -69,16 +63,14 @@
             \li \l{http://www.perforce.com}
             \li Server version 2006.1 and later
 
-                Disabled by default. To enable the plugin, select
+                Enable the plugin to use it.
-                \uicontrol Help > \uicontrol {About Plugins} >
-                \uicontrol {Version Control} > \uicontrol Perforce.
         \row
             \li \l{Subversion}
             \li \l{http://subversion.apache.org/}
             \li Subversion version 1.7.0 and later
     \endtable
 
-    \sa {Create VCS repositories for new projects},
+    \sa {Create VCS repositories for new projects}, {Enable and disable plugins},
     {Set up version control systems}, {Use common VCS functions}
 */
 

doc/qtcreator/src/webassembly/creator-webassembly.qdoc

@@ -21,6 +21,8 @@
     You can change the web browser in the project's \l{Specifying Run Settings}
     {run settings}.
 
+    \note Enable the WebAssembly plugin to use it.
+
     To build applications for the web and run them in a web browser, you need to
     install Qt for WebAssembly and the tool chain for compiling to WebAssembly.
 
@@ -56,16 +58,6 @@
             {Install Emscripten}.
         \endlist
 
-    \section2 Enabling the WebAssembly Plugin
-
-    To enable the plugin:
-
-    \list 1
-        \li In \QC, select \uicontrol Help > \uicontrol {About Plugins} >
-            \uicontrol {Device Support} > \uicontrol {WebAssembly}.
-        \li Select \uicontrol {Restart Now} to restart \QC and load the plugin.
-    \endlist
-
     \section2 Specifying WebAssembly Settings
 
     To configure \QC for building Qt apps for the web:
@@ -119,4 +111,6 @@
     You can now build Qt applications in WebAssembly format and run them in
     a web browser as described in \l {Building for Multiple Platforms} and
     \l{Running on Multiple Platforms}.
+
+    \sa {Enable and disable plugins}
 */

doc/qtcreator/src/widgets/qtdesigner-plugins.qdoc

@@ -47,7 +47,8 @@
     located in \c {<Qt_version>\<compiler>\bin} in the Qt installation
     directory. It fetches plugins from the \c {\plugins\designer} subdirectory
     of \c bin. To check which plugins were loaded successfully and which failed,
-    choose \uicontrol Help > \uicontrol {About Plugins}.
+    choose \uicontrol Help > \uicontrol {About Plugins} on Linux and Windows
+    (or \uicontrol {\QC} > \uicontrol {About Plugins} on \macos).
 
     \section1 Matching Build Keys