diff --git a/share/qtcreator/translations/qtcreator_ru.ts b/share/qtcreator/translations/qtcreator_ru.ts index 12b7832f563..d2fa41e295d 100644 --- a/share/qtcreator/translations/qtcreator_ru.ts +++ b/share/qtcreator/translations/qtcreator_ru.ts @@ -1,6 +1,326 @@ + + Analyzer + + Analyzer + Анализатор + + + + Analyzer::AnalyzerManager + + Start &Analyzer + Запустить &анализатор + + + Start + Запустить + + + Stop + Остановить + + + Debug + Отладка + + + Release + Выпуск + + + Run %1 in %2 Mode? + Выполнить %1 в режиме %2? + + + <html><head/><body><p>You are trying to run the tool '%1' on an application in %2 mode. The tool is designed to be used in %3 mode.</p><p>Do you want to continue and run it in %2 mode?</p></body></html> + <html><head/><body><p>Попытка запустить утилиту «%1» для приложения в режиме %2. Она разработана для использования в режиме %3.</p><p>Продолжить запуск в режиме %2?</p></body></html> + + + Tool '%1' started... + Утилита «%1» запущена... + + + Tool '%1' finished, %n issues were found. + + Утилита «%1» завершилась, выявлена %n проблема. + Утилита «%1» завершилась, выявлено %n проблемы. + Утилита «%1» завершилась, выявлено %n проблем. + + + + Tool '%1' finished, no issues were found. + Утилита «%1» завершилась, проблем не выявлено. + + + &Do not ask again + &Больше не спрашивать + + + + Analyzer::AnalyzerProjectSettings + + Analyzer Settings + Настройки анализатора + + + + Analyzer::IAnalyzerTool + + Debug + Отладка + + + Release + Выпуск + + + + Analyzer::Internal + + %1 in %2 + %1 в %2 + + + in %1 + в %1 + + + + Analyzer::Internal::AbstractMemcheckSettings + + Memory Analysis + Анализ памяти + + + + Analyzer::Internal::AnalyzerMode + + Analyze + Анализировать + + + + Analyzer::Internal::AnalyzerOutputPane + + No current analysis tool + Текущий интрументарий анализа отсутствует + + + Analysis + Анализ + + + + Analyzer::Internal::AnalyzerPlugin + + Analyzer + Category under which Analyzer tasks are listed in build issues view + Анализатор + + + + Analyzer::Internal::AnalyzerRunConfigWidget + + Analyzer Settings + Настройки анализатора + + + Available settings: %1 + Доступные настройки: %1 + + + + Analyzer::Internal::AnalyzerRunControl + + Build Issues + Сообщения сборки + + + + Analyzer::Internal::AnalyzerRunControlFactory + + Analyzer + Анализатор + + + + Analyzer::Internal::MemcheckConfigWidget + + Valgrind Suppression File (*.supp);;All Files (*) + Файл игнорирований Valgrind (*.supp);;Все файлы (*) + + + + Analyzer::Internal::MemcheckEngine + + Analyzing Memory + Анализ памяти + + + Analyzing memory of %1 + Анализ памяти %1 + + + + Analyzer::Internal::MemcheckErrorView + + Copy Selection + Копировать выбранное + + + Suppress Error + Игнорировать ошибку + + + + Analyzer::Internal::MemcheckTool + + Analyze Memory + Анализировать память + + + Error Filter + Фильтр ошибок + + + Definite Memory Leaks + Определённые утечки памяти + + + Possible Memory Leaks + Возможные утечки памяти + + + Use of Uninitialized Memory + Использование неинициализированной памяти + + + Invalid Frees + Неверные освобождения + + + These suppression files were used in the last memory analyzer run. + Эти файлы были использованы при последнем запуске анализатора. + + + External Errors + Внешние ошибки + + + Show issues originating outside currently opened projects. + Показывать события, возникшие вне открытых проектов. + + + Suppressions + Игнорирования + + + Internal Error + Внутренняя ошибка + + + Error occurred parsing valgrind output: %1 + Возникла ошибка при разборе вывода valgrind: %1 + + + + Analyzer::Internal::SuppressionDialog + + Select Suppression File + Выбор файла игнорирований + + + Save Suppression + Сохранить игнорирования + + + + Analyzer::Internal::ValgrindConfigWidget + + Valgrind Command + Команда Valgrind + + + + Analyzer::Internal::ValgrindEngine + + Valgrind options: %1 + Параметры Valgrind: %1 + + + Working directory: %1 + Рабочик каталог: %1 + + + Command-line arguments: %1 + Аргументы командной строки: %1 + + + ** Analysing finished ** + ** Анализ завершён ** + + + ** Error: "%1" could not be started: %2 ** + ** Ошибка: Не удалось запустить «%1»: %2 ** + + + ** Error: no valgrind executable set ** + ** Error: программа vlagrind не задана ** + + + ** Process Terminated ** + ** Процесс завершился ** + + + Application Output + Вывод приложения + + + + Analyzer::Internal::ValgrindSettings + + Generic Settings + Общие настройки + + + + AnchorButtons + + Set top anchor + Установить верхнюю привязку + + + Setting anchors in states is not supported. + Установка привязок на состояния не поддерживается. + + + Set bottom anchor + Установить нижнюю привязку + + + Set left anchor + Установить левую привязку + + + Set right anchor + Установить правую привязку + + + Fill to parent + Заполнить предка + + + Set vertical anchor + Установить вертикальную привязку + + + Set horizontal anchor + Установить горизонтальную привязку + + Application @@ -13,7 +333,7 @@ Could not find 'Core.pluginspec' in %1 - Не удалось найти "Core.pluginspec" в %1 + Не удалось найти «Core.pluginspec» в %1 Qt Creator - Plugin loader messages @@ -27,12 +347,16 @@ Запуск отладчика - Executable: - Программа: + &Executable: + &Программа: - Core file: - Файл дампа: + &Core file: + Файл &дампа: + + + &Tool chain: + &Инструментарий: @@ -42,31 +366,12 @@ Запуск отладчика - Attach to process ID: - Поключиться к процессу с ID: - - - - AttachTcfDialog - - Start Debugger - Запуск отладчика + Attach to &process ID: + Поключиться к &процессу с ID: - Host and port: - Хост и порт: - - - Architecture: - Архитектура: - - - Use server start script: - Использовать скрипт: - - - Server start script: - Скрипт запуска сервера: + &Tool chain: + &Инструментарий: @@ -80,6 +385,16 @@ Decimal signed value (big endian): %4 Десятичное беззнаковое (big endian): %2 Десятичное знаковое (little endian): %3 Десятичное знаковое (big endian): %4 + + + Previous decimal unsigned value (little endian): %1 +Previous decimal unsigned value (big endian): %2 +Previous decimal signed value (little endian): %3 +Previous decimal signed value (big endian): %4 + Предыдущее десятичное беззнаковое значение (обратный порядок байт): %1 +Предыдущее десятичное беззнаковое значение (прямой порядок байт): %2 +Предыдущее десятичное знаковое значение (обратный порядок байт): %3 +Предыдущее десятичное знаковое значение (прямой порядок байт): %4 Copying Failed @@ -125,6 +440,499 @@ Decimal signed value (big endian): %4 &Повторить + + Bazaar::Internal::BazaarCommitPanel + + General Information + Основная информация + + + Branch: + Ветка: + + + Perform a local commit in a bound branch. +Local commits are not pushed to the master branch until a normal commit is performed + Осуществлять локальную фиксацию в ветку. +Локальные фиксации не отправляются в основную ветку при выполнении обычных фиксаций + + + Local commit + Локальная фиксация + + + Commit Information + Информация о фиксации + + + Author: + Автор: + + + Email: + Email: + + + Fixed bugs: + Исправленные ошибки: + + + + Bazaar::Internal::BazaarControl + + Bazaar + + + + + Bazaar::Internal::BazaarEditor + + Annotate %1 + Аннотация %1 + + + Annotate parent revision %1 + Аннотация родительской ревизии %1 + + + + Bazaar::Internal::BazaarPlugin + + Bazaar + + + + Annotate Current File + Аннотация текущего файла (annotate) + + + Annotate "%1" + Аннотация «%1» + + + Diff Current File + Сравнить текущий файл + + + Diff "%1" + Сравнить «%1» + + + Log Current File + История текущего файла + + + Log "%1" + История «%1» + + + Status Current File + Состояние текущего файла + + + Status "%1" + Состояние «%1» + + + ALT+Z,Alt+D + + + + ALT+Z,Alt+L + + + + ALT+Z,Alt+S + + + + Add + Добавить + + + Add "%1" + Добавить «%1» + + + Delete... + Удалить... + + + Delete "%1"... + Удалить «%1»... + + + Revert Current File... + Откатить текущий файл... + + + Revert "%1"... + Откатить «%1»... + + + Diff + Сравнить + + + Log + История + + + Revert... + Откатить... + + + Status + Состояние + + + Pull... + Принять (pull)... + + + Push... + Отправить (push)... + + + Update... + Обновить (update)... + + + Commit... + Фиксировать... + + + ALT+Z,Alt+C + + + + Create Repository... + Создать хранилище... + + + Update + Обновление + + + Commit + Фиксировать + + + Diff Selected Files + Сравнить выбранные файлы + + + &Undo + От&менить + + + &Redo + &Повторить + + + There are no changes to commit. + Нет изменений для фиксации. + + + Unable to generate a temporary file for the commit editor. + Не удалось создать временный файл для редактора фиксаций. + + + Unable to create an editor for the commit. + Не удалось создать редактор фиксации. + + + Unable to create a commit editor. + Не удалось создать редактор фиксаций. + + + Commit changes for "%1". + Фиксация изменений «%1». + + + Close Commit Editor + Закрыть редактор фиксаций + + + Do you want to commit the changes? + Желаете зафиксировать изменения? + + + Message check failed. Do you want to proceed? + Не удалось проверить сообщение. Продолжить? + + + + Bazaar::Internal::CloneOptionsPanel + + Options + Параметры + + + Create a stacked branch referring to the source branch. +The new branch will depend on the availability of the source branch for all operations + Сделать многоярусную ветку, ссылающуюся на ветку исходников. +Новая ветка будет зависеть от доступности для всех операций исходной ветки + + + Stacked + Многоярусность + + + Do not use a shared repository, even if available + Не использовать общее хранилище, даже если доступно + + + Standalone + Автономная работа + + + Bind new branch to source location + Привязать новую ветку к размещению исходной + + + Switch the checkout in the current directory to the new branch + Переключить рабочую копию в текущем каталоге на новую ветку + + + Switch checkout + Переключить рабочую копию + + + Hard-link working tree files where possible + По возможности делать жёсткие ссылки в рабочей копии + + + Hardlink + Жёсткие ссылки + + + Create a branch without a working-tree + Создать ветку без рабочей копии + + + No working-tree + Без рабочей копии + + + Revision: + Ревизия: + + + By default, branch will fail if the target directory exists, but does not already have a control directory. +This flag will allow branch to proceed + По умолчанию создание ветки завершится ошибкой, если каталог существует, +но не находится под контролем. Этот флаг позволяет обойти ограничение + + + Use existing directory + Использовать существующий каталог + + + + Bazaar::Internal::CloneWizard + + Clones a Bazaar branch and tries to load the contained project. + Клонирование ветки Bazaar с последующей попыткой загрузки содержащегося там проекта. + + + Bazaar Clone (Or Branch) + Клонирование или ответвление Bazaar + + + + Bazaar::Internal::CloneWizardPage + + Location + Размещение + + + Specify repository URL, clone directory and path. + Выбор URL хранилища, каталога клонирования и пути. + + + Clone URL: + URL для клонирования: + + + + Bazaar::Internal::CommitEditor + + Commit Editor + Редактор фиксаций + + + + Bazaar::Internal::OptionsPage + + Form + + + + Configuration + Настройка + + + Command: + Команда: + + + User + Пользователь + + + Username to use by default on commit. + Имя пользователя используемое по умолчанию при фиксации. + + + Default username: + Имя пользователя: + + + Email to use by default on commit. + Email используемый по умолчанию при фиксации. + + + Default email: + Email по умолчанию: + + + Miscellaneous + Разное + + + Log count: + Количество отображаемых записей истории фиксаций: + + + The number of recent commit logs to show, choose 0 to see all enteries + Количество отображаемых последних сообщений о фиксации, +выберите 0, чтобы видеть все + + + Timeout: + Время ожидания: + + + s + сек + + + Prompt on submit + Спрашивать при фиксации + + + Bazaar + + + + + Bazaar::Internal::OptionsPageWidget + + Bazaar Command + Команда Bazaar + + + + Bazaar::Internal::PullOrPushDialog + + Dialog + + + + Local filesystem: + Файловая система: + + + Options + Параметры + + + Remember specified location as default + Запомнить указанное размещение, как умолчальное + + + Ignore differences between branches and overwrite +unconditionally + Игнорировать отличия между ветками и перезаписывать + + + Overwrite + Перезаписывать + + + Create the path leading up to the branch if it does not already exist + Создавать родительские каталоги ветки, если они не существуют + + + Create prefix + Создавать родительские каталоги + + + Revision: + Ревизия: + + + Perform a local pull in a bound branch. +Local pulls are not applied to the master branch + Производить локальное принятие в выбранную ветку. +Локальное принятие не применяется к основной ветке + + + Local + Локально + + + for example https://[user[:pass]@]host[:port]/[path] + например https://[имя[:пароль]@]адрес[:порт]/[путь] + + + By default, push will fail if the target directory exists, but does not already have a control directory. +This flag will allow push to proceed + По умолчанию, отправка завершится ошибкой, если каталог уже существует, +но не содержит управляющего подкаталога. +Этот флаг позволяет выполнить эту операцию + + + Use existing directory + Использовать существующий каталог + + + Pull Source + Источник приёма (pull source) + + + Push Destination + Назначение отправлений (push) + + + Branch Location + Размещение ветки + + + Default location + По умолчанию + + + Specify URL: + Особый URL: + + + + Bazaar::Internal::RevertDialog + + Revert + Откатить + + + Specify a revision other than the default? + Указать ревизию отличную от умолчальной? + + + Revision: + Ревизия: + + BehaviorDialog @@ -184,6 +992,325 @@ Decimal signed value (big endian): %4 Имя свойства: + + BehaviorSettingsPage + + Form + + + + + BehaviorSettingsWidget + + Tabs and Indentation + Табуляция и отступы + + + Insert &spaces instead of tabs + &Пробелы вместо табов + + + Ta&b size: + Размер &табуляции: + + + Automatically determine based on the nearest indented line (previous line preferred over next line) + Определять автоматически на основе соседних строк с отступами (предыдущая строка имеет приоритет перед следующей) + + + Based on the surrounding lines + На основе соседних строк + + + &Indent size: + Размер отст&упа: + + + Enable automatic &indentation + &Автоотступы + + + Backspace will go back one indentation level instead of one space. + Забой перемещает на позицию, а не на пробел назад. + + + &Backspace follows indentation + &Забой следует отступам + + + Block indentation style: + Стиль отступа блоков: + + + <html><head/><body> +Controls the indentation style of curly brace blocks. + +<ul> +<li>Exclude Braces: The braces are not indented. +<pre> +void foo() +{ + if (a) + { + bar(); + } +} +</pre> +</li> + +<li>Include Braces: The braces are indented. The contents of the block are on the same level as the braces. +<pre> +void foo() + { + if (a) + { + bar(); + } + } +</pre> +</li> + +<li>GNU Style: Indent the braces for blocks in statements. The contents are indented twice. +<pre> +void foo() +{ + if (a) + { + bar(); + } +} +</pre> +</li> +</ul></body></html> + <html><head/><body> +Управляет стилем отступов блоков в фигурных скобоках. + +<ul> +<li>Без скобок: скобки не сдвигаются. +<pre> +void foo() +{ + if (a) + { + bar(); + } +} +</pre> +</li> + +<li>Включая скобки: скобки сдвигаются, а содержимое блока на уровне скобок. +<pre> +void foo() + { + if (a) + { + bar(); + } + } +</pre> +</li> + +<li>Стиль GNU: скобки сдвигаются на размер оператора, а содержимое блока сдвигается дважды. +<pre> +void foo() +{ + if (a) + { + bar(); + } +} +</pre> +</li> +</ul></body></html> + + + Exclude Braces + Без скобок + + + Include Braces + Включая скобки + + + GNU Style + Стиль GNU + + + Tab key performs auto-indent: + Автоотступ по клавише TAB: + + + Never + Никогда + + + Always + Всегда + + + In Leading White Space + Перед текстом + + + Align continuation lines: + Выравнивание продолжений строк: + + + <html><head/><body> +Influences the indentation of continuation lines. + +<ul> +<li>Not At All: Do not align at all. Lines will only be indented to the current logical indentation depth. +<pre> +(tab)int i = foo(a, b +(tab)c, d); +</pre> +</li> + +<li>With Spaces: Always use spaces for alignment, regardless of the other indentation settings. +<pre> +(tab)int i = foo(a, b +(tab) c, d); +</pre> +</li> + +<li>With Regular Indent: Use tabs and/or spaces for alignment, as configured above. +<pre> +(tab)int i = foo(a, b +(tab)(tab)(tab) c, d); +</pre> +</li> +</ul></body></html> + <html><head/><body> +Влияет на отступы продолжений строк. + +<ul> +<li>Не выравнивать: вообще не выравнивать, строки сдвигаются только на текущий логический уровень. +<pre> +(tab)int i = foo(a, b +(tab)c, d); +</pre> +</li> + +<li>Пробелами: всегда использовать пробелы, вне зависимости от установок. +<pre> +(tab)int i = foo(a, b +(tab) c, d); +</pre> +</li> + +<li>Отступами: использовать табуляцию и/или пробелы, в зависимости от настроек выше. +<pre> +(tab)int i = foo(a, b +(tab)(tab)(tab) c, d); +</pre> +</li> +</ul></body></html> + + + Not At All + Не выравнивать + + + With Spaces + Пробелами + + + With Regular Indent + Отступами + + + Cleanup actions which are automatically performed right before the file is saved to disk. + Операции очистки, автоматически выполняемые перед сохранением файла на диск. + + + Cleanups Upon Saving + Очистка перед сохранением + + + Removes trailing whitespace upon saving. + Перед сохранением удаляются незначащие пробелы в конце строк. + + + &Clean whitespace + &Очищать пробелы + + + Clean whitespace in entire document instead of only for changed parts. + Очищать пробелы во всём документе, а не только в изменившихся частях. + + + In entire &document + &Во всём документе + + + Correct leading whitespace according to tab settings. + Исправлять отступы вначале в соответствии с настройками табуляции. + + + Clean indentation + Очищать отступы + + + &Ensure newline at end of file + О&беспечивать пустую строку в конце файла + + + File Encodings + Кодировки файлов + + + Default encoding: + По умолчанию: + + + UTF-8 BOM: + + + + <html><head/><body> +<p>How text editors should deal with UTF-8 Byte Order Marks. The options are:</p> +<ul ><li><i>Add If Encoding Is UTF-8:</i> always add a BOM when saving a file in UTF-8 encoding. Note that this will not work if the encoding is <i>System</i>, as Qt Creator does not know what it actually is.</li> +<li><i>Keep If Already Present: </i>save the file with a BOM if it already had one when it was loaded.</li> +<li><i>Always Delete:</i> never write an UTF-8 BOM, possibly deleting a pre-existing one.</li></ul> +<p>Note that UTF-8 BOMs are uncommon and treated incorrectly by some editors, so it usually makes little sense to add any.</p> +<p>This setting does <b>not</b> influence the use of UTF-16 and UTF-32 BOMs.</p></body></html> + <html><head/><body> +<p>Действия редактора с маркерами порядка байт (Byte Order Mark) UTF-8. Варианты:</p> +<ul> +<li><i>Добавлять, если кодировка UTF-8:</i> всегда добавлять BOM при сохранении в кодировке UTF-8. Не будет работать, если используется <i>Системная</i> кодировка, так как Qt Creator не знает, какая она на самом деле.</li> +<li><i>Сохранять, если уже имеется:</i> записывать BOM в файл, если он был при его загрузке.</li> +<li><i>Всегда удалять:</i> никогда не записывать BOM в файл, даже если он там был изначально.</li> +</ul> +<p>Маркеры порядка байт не часто встречаются и могут некорректно интерпретироваться некоторыми редакторами, поэтому нужно серьезное основание для их добавления.</p> +<p>Эта настройка <b>не влияет</b> на использование маркеров кодировок <b>UTF-16</b> и <b>UTF-32</b>.</p> +</body></html> + + + Add If Encoding Is UTF-8 + Добавлять, если кодировка UTF-8 + + + Keep If Already Present + Сохранять, если уже имеется + + + Always Delete + Всегда удалять + + + Mouse + Мышь + + + Enable &mouse navigation + Включить навигацию &мышью + + + Enable scroll &wheel zooming + Включить масштабирование &колёсиком + + BookmarkDialog @@ -308,11 +1435,11 @@ Decimal signed value (big endian): %4 Ctrl+M - Ctrl+M + Meta+M - Meta+M + Previous Bookmark @@ -320,11 +1447,11 @@ Decimal signed value (big endian): %4 Ctrl+, - Ctrl+, + Meta+, - Meta+, + Next Bookmark @@ -332,11 +1459,11 @@ Decimal signed value (big endian): %4 Ctrl+. - Ctrl+. + Meta+. - Meta+. + Previous Bookmark in Document @@ -378,64 +1505,6 @@ Decimal signed value (big endian): %4 Снизу - - BreakCondition - - Condition: - Условие: - - - Ignore count: - Число пропусков: - - - Thread specification: - Спецификация потока: - - - - BreakpointDialog - - Breakpoint type: - Тип точки останова: - - - File name: - Имя файла: - - - Line number: - Номер строки: - - - Function: - Функция: - - - Condition: - Условие: - - - Ignore count: - Число пропусков: - - - Thread specification: - Спецификация потока: - - - Address: - Адрес: - - - Edit Breakpoint Properties - Изменение свойств точки останова - - - Use full path: - Полный путь: - - BuildSettingsPanel @@ -476,6 +1545,13 @@ Decimal signed value (big endian): %4 &Изменить + + CMakeProjectManager::Internal::CMakeManager + + Run CMake + Запуск CMake + + CMakeProjectManager::Internal::CMakeOpenProjectWizard @@ -557,28 +1633,12 @@ Decimal signed value (big endian): %4 Run CMake - Выполнить CMake + Запуск CMake Arguments Параметры - - Please specify the path to the CMake executable. No CMake executable was found in the path. - Укажите размещение программы CMake, так как она не была найдена автоматически. - - - The CMake executable (%1) does not exist. - Программа CMake (%1) отсутствует. - - - The path %1 is not a valid CMake. - Путь %1 не является корректным путём к программе CMake. - - - The directory %1 already contains a cbp file, which is recent enough. You can pass special arguments or change the used toolchain here and rerun CMake. Or simply finish the wizard directly. - Каталог %1 уже содержит достаточно свежий файл cbp. Можно передать специальные параметры или сменить используемый инструментарий с последующим перезапуском CMake. Либо просто завершить работу с мастером. - The directory %1 does not contain a cbp file. Qt Creator needs to create this file by running CMake. Some projects require command line arguments to the initial CMake call. Каталог %1 не содержит файла cbp. Qt Creator создаст этот файл путём запуска CMake. Некоторые проекты требуют указания дополнительных параметров командной строки для первого запуска CMake. @@ -593,27 +1653,43 @@ Decimal signed value (big endian): %4 Qt Creator needs to run CMake in the new build directory. Some projects require command line arguments to the initial CMake call. - Qt Creator должен выполнить CMake в новом каталоге сборки. Некоторые проекты требуют указания дополнительных параметров командной строки для первого запуска CMake. + Qt Creator должен запустить CMake в новом каталоге сборки. Некоторые проекты требуют указания дополнительных параметров командной строки при первом запуске CMake. Refreshing cbp file in %1. Обновление файла cbp в %1. - NMake Generator - Генератор NMake + MinGW Generator (%1) + Генератор MinGW (%1) + + + No valid cmake executable specified. + Не указана корректная программа cmake. + + + CMake exited with errors. Please check CMake output. + CMake завершился с ошибкой. Проверьте сообщения CMake. NMake Generator (%1) Генератор NMake (%1) - MinGW Generator - Генератор MinGW + Please specify the path to the cmake executable. No cmake executable was found in the path. + Укажите размещение программы cmake, так как она не была найдена автоматически. - No valid CMake executable specified. - Не указана корректная программа CMake. + The cmake executable (%1) does not exist. + Программа cmake (%1) отсутствует. + + + The path %1 is not a valid cmake. + Путь %1 не является корректным путём к программе cmake. + + + The directory %1 already contains a cbp file, which is recent enough. You can pass special arguments or change the used tool chain here and rerun CMake. Or simply finish the wizard directly. + Каталог %1 уже содержит достаточно свежий файл cbp. Можно передать специальные параметры или сменить используемый инструментарий с последующим перезапуском CMake. Либо просто завершить работу с мастером. @@ -670,11 +1746,7 @@ Decimal signed value (big endian): %4 Сборка - <b>Make:</b> %1 %2 - <b>Make:</b> %1 %2 - - - <b>Unknown Toolchain</b> + <b>Unknown tool chain</b> <b>Неизвестный инструментарий</b> @@ -720,7 +1792,7 @@ Decimal signed value (big endian): %4 CVS::Internal::CVSEditor Annotate revision "%1" - Аннотация ревизии "%1" + Аннотация ревизии «%1» @@ -739,7 +1811,7 @@ Decimal signed value (big endian): %4 Add "%1" - Добавить "%1" + Добавить «%1» Alt+C,Alt+A @@ -755,7 +1827,7 @@ Decimal signed value (big endian): %4 Diff "%1" - Сравнить "%1" + Сравнить «%1» Alt+C,Alt+D @@ -771,7 +1843,7 @@ Decimal signed value (big endian): %4 Commit "%1" - Фиксировать "%1" + Фиксировать «%1» Alt+C,Alt+C @@ -783,11 +1855,11 @@ Decimal signed value (big endian): %4 Cannot find repository for '%1' - Не удалось найти хранилище для "%1" + Не удалось найти хранилище для «%1» Filelog "%1" - История '%1' + История «%1» Annotate Current File @@ -795,7 +1867,7 @@ Decimal signed value (big endian): %4 Annotate "%1" - Аннотация "%1" (annotate) + Аннотация «%1» (annotate) Delete... @@ -803,7 +1875,7 @@ Decimal signed value (big endian): %4 Delete "%1"... - Удалить "%1"... + Удалить «%1»... Revert... @@ -811,7 +1883,7 @@ Decimal signed value (big endian): %4 Revert "%1"... - Откатить "%1"... + Откатить «%1»... Edit @@ -819,7 +1891,7 @@ Decimal signed value (big endian): %4 Edit "%1" - Изменить "%1" + Изменить «%1» Unedit @@ -827,7 +1899,7 @@ Decimal signed value (big endian): %4 Unedit "%1" - Отменить изменения "%1" + Отменить изменения «%1» Unedit Repository @@ -835,7 +1907,7 @@ Decimal signed value (big endian): %4 Diff Project "%1" - Сравнить проект "%1" + Сравнить проект «%1» Project Status @@ -843,7 +1915,7 @@ Decimal signed value (big endian): %4 Status of Project "%1" - Состояние проекта "%1" + Состояние проекта «%1» Log Project @@ -851,7 +1923,7 @@ Decimal signed value (big endian): %4 Log Project "%1" - История проекта "%1" + История проекта «%1» Update Project @@ -859,7 +1931,7 @@ Decimal signed value (big endian): %4 Update Project "%1" - Обновить проект "%1" + Обновить проект «%1» Commit Project @@ -867,7 +1939,7 @@ Decimal signed value (big endian): %4 Commit Project "%1" - Фиксировать проект "%1" + Фиксировать проект «%1» Diff Repository @@ -951,11 +2023,11 @@ Decimal signed value (big endian): %4 Would you like to discard your changes to the repository '%1'? - Желаете откатить изменения хранилища "%1"? + Желаете откатить изменения хранилища «%1»? Would you like to discard your changes to the file '%1'? - Желаете откатить изменения файла "%1"? + Желаете откатить изменения файла «%1»? Project status @@ -971,7 +2043,7 @@ Decimal signed value (big endian): %4 Could not find commits of id '%1' on %2. - Не удалось найти фиксацию с идентификатором '%1' на %2. + Не удалось найти фиксацию с идентификатором «%1» на %2. No cvs executable specified! @@ -1073,95 +2145,6 @@ Decimal signed value (big endian): %4 Команда CVS - - CdbCore::CoreEngine - - Unable to set the image path to %1: %2 - Не удалось установить путь к образу "%1": %2 - - - Unable to create a process '%1': %2 - Не удалось создать процесс "%1": %2 - - - Attaching to a process failed for process id %1: %2 - Не удалось поключиться к процессу с ID %1: %2 - - - - CdbOptionsPageWidget - - These options take effect at the next start of Qt Creator. - Данные настройки вступят в силу после перезапуска Qt Creator. - - - Path: - Путь: - - - Debugger Paths - Пути отладчика - - - Symbol paths: - Пути к символам: - - - Source paths: - Пути к исходным текстам: - - - CDB - Placeholder - - - - Other Options - Другие параметры - - - Verbose symbol loading - Наглядная загрузка символов - - - Fast loading of debugging helpers - Быстрая загрузка помощников отладчика - - - Break on exception - Остановиться при исключении - - - - CdbStackFrameContext - - <Unknown Type> - <Неизвестный тип> - - - <Unknown Value> - <Неизвестное значение> - - - <Unknown> - <Неизвестный> - - - - CdbSymbolGroupContext - - <Unknown Type> - <Неизвестный тип> - - - <Unknown Value> - <Неизвестное значение> - - - <Unknown> - <Неизвестный> - - ChangeSelectionDialog @@ -1235,8 +2218,8 @@ Decimal signed value (big endian): %4 Сервер: - Note: Specify the host name for the CodePaster service without any protocol prepended (e.g. codepaster.mycompany.com). - Обратите внимание, что узел сервиса CodePaster нужно задавать без указания протокола (например: codepaster.mycompany.com). + <i>Note: Specify the host name for the CodePaster service without any protocol prepended (e.g. codepaster.mycompany.com).</i> + <i>Обратите внимание, что узел сервиса CodePaster нужно задавать без указания протокола (например: codepaster.mycompany.com).</i> @@ -1267,7 +2250,7 @@ Decimal signed value (big endian): %4 Empty snippet received for "%1". - Для "%1" получен пустой фрагмент. + Для «%1» получен пустой фрагмент. @@ -1413,6 +2396,28 @@ Decimal signed value (big endian): %4 Скопировать ссылку в буфер обмена + + ColorGroupBox + + Color editor + Редактор цвета + + + + ColorTypeButtons + + Solid color + Сплошной цвет + + + Gradient + Градиент + + + Transparent + Прозрачность + + CommandMappings @@ -1431,10 +2436,6 @@ Decimal signed value (big endian): %4 Target Цель - - Defaults - По умолчанию - Import... Импорт... @@ -1455,6 +2456,18 @@ Decimal signed value (big endian): %4 Reset Сбросить + + Reset all to default + Сбросить всё в исходное состояние + + + Reset All + Сбросить всё + + + Reset to default + Сбросить в исходное состояние + CommonOptionsPage @@ -1486,10 +2499,6 @@ Decimal signed value (big endian): %4 Register Qt Creator for debugging crashed applications. Зарегистрировать Qt Creator для отладки приложений, завершённых аварийно. - - GUI Behavior - Особенности интерфейса пользователя - Use Qt Creator for post-mortem debugging Назначить Qt Creator системным отладчиком @@ -1510,6 +2519,10 @@ Decimal signed value (big endian): %4 Switch to previous mode on debugger exit Переключаться в предыдущий режим при завершении отладчика + + Behavior + Поведение + CommonSettingsPage @@ -1541,7 +2554,7 @@ name <email> alias <email> A simple file containing lines with field names like "Reviewed-By:" which will be added below the submit editor. - Простой файл, содержащий строки типа "Reviewed-By:", которые будут добавлены ниже редактора сообщения. + Простой файл, содержащий строки типа «Reviewed-By:», которые будут добавлены ниже редактора сообщения. User fields configuration file: @@ -1562,7 +2575,7 @@ should a repository require SSH-authentication (see documentation on SSH and the CompletionSettingsPage Automatically insert (, ) and ; when appropriate. - Автоматически вставлять '(, )' и ';', когда потребуется. + Автоматически вставлять «(», «)» и «;», когда потребуется. &Automatically insert brackets @@ -1610,7 +2623,7 @@ should a repository require SSH-authentication (see documentation on SSH and the When Triggered - По необходимости + Явно требуется Always @@ -1790,7 +2803,7 @@ should a repository require SSH-authentication (see documentation on SSH and the Failed to open an editor for '%1'. - Не удалось открыть редактор для '%1'. + Не удалось открыть редактор для «%1». [read only] @@ -1871,10 +2884,6 @@ Would you like to overwrite them? Go Forward Перейти вперёд - - Open in External Editor - Открыть во внешнем редакторе - Revert File to Saved Вернуть файл к сохранённому состоянию @@ -1944,8 +2953,24 @@ Would you like to overwrite them? Удалить все разделения - The file <i>%1</i> is read only. - Файл <i>%1</i> только для чтения. + Ad&vanced + &Дополнительно + + + Full path of the current document including file name. + Полный путь с именем файла к текущему документу. + + + Full path of the current document excluding file name. + Полный путь без имени файла к текущему документу. + + + X-coordinate of the current editor's upper left corner, relative to screen. + Координата X левого верхнего угла окна редактора относительно экрана. + + + Y-coordinate of the current editor's upper left corner, relative to screen. + Координата Y левого верхнего угла окна редактора относительно экрана. Save %1 &As... @@ -1979,14 +3004,6 @@ Would you like to overwrite them? %1,o %1,o - - &Advanced - &Дополнительно - - - Alt+V,Alt+I - - Opening File Открытие файла @@ -1995,22 +3012,10 @@ Would you like to overwrite them? Cannot open file %1! Не удалось открыть файл %1! - - File is Read Only - Файл только для чтения - - - Open with VCS (%1) - Открыть с помощью VCS (%1) - Make writable Сделать записываемым - - Save as ... - Сохранить как... - Failed! Не удалось! @@ -2023,6 +3028,10 @@ Would you like to overwrite them? Could not set permissions to writable. Не удалось разрешить запись. + + Qt Creator + + <b>Warning:</b> You are changing a read-only file. <b>Внимание:</b> Вы изменяете файл, доступный только для чтения. @@ -2055,10 +3064,6 @@ Would you like to overwrite them? Cancel Отмена - - <table border=1 cellspacing=0 cellpadding=3><tr><th>Variable</th><th>Expands to</th></tr><tr><td>%f</td><td>file name</td></tr><tr><td>%l</td><td>current line number</td></tr><tr><td>%c</td><td>current column number</td></tr><tr><td>%x</td><td>editor's x position on screen</td></tr><tr><td>%y</td><td>editor's y position on screen</td></tr><tr><td>%w</td><td>editor's width in pixels</td></tr><tr><td>%h</td><td>editor's height in pixels</td></tr><tr><td>%W</td><td>editor's width in characters</td></tr><tr><td>%H</td><td>editor's height in characters</td></tr><tr><td>%%</td><td>%</td></tr></table> - <table border=1 cellspacing=0 cellpadding=3><tr><th>Переменная</th><th>Значение</th></tr><tr><td>%f</td><td>имя файла</td></tr><tr><td>%l</td><td>номер текущей строки</td></tr><tr><td>%c</td><td>номер текущего столбца</td></tr><tr><td>%x</td><td>положение редактора по горизонтали</td></tr><tr><td>%y</td><td>положение редактора по вертикали</td></tr><tr><td>%w</td><td>ширина редактора в пикселях</td></tr><tr><td>%h</td><td>высота редактора в пикселях</td></tr><tr><td>%W</td><td>ширина редактора в символах</td></tr><tr><td>%H</td><td>высота редактора в символах</td></tr><tr><td>%%</td><td>%</td></tr></table> - Core::EditorToolBar @@ -2075,23 +3080,34 @@ Would you like to overwrite them? Файл записываемый + + Core::ExternalToolManager + + Configure... + Настроить... + + + External + Внешние + + + Error while parsing external tool %1: %2 + Ошибка разбора внешней утилиты %1: %2 + + + Error: External tool in %1 has duplicate id + Ошибка: Внешняя утилита в %1 имеет повторяющийся id + + Core::FileManager - - Cannot save file - Не удалось сохранить файл - - - Cannot save changes to '%1'. Do you want to continue and lose your changes? - Не удалось сохранить изменения в '%1'. Продолжить с потерей изменений? - Overwrite? Перезаписать? An item named '%1' already exists at this location. Do you want to overwrite it? - Элемент с названием '%1' уже существует в указанном месте. Желаете его перезаписать? + Элемент с названием «%1» уже существует в указанном месте. Желаете его перезаписать? Save File As @@ -2101,6 +3117,26 @@ Would you like to overwrite them? Open File Открыть файл + + File is Read Only + Файл только для чтения + + + The file <i>%1</i> is read only. + Файл <i>%1</i> только для чтения. + + + Open with VCS (%1) + Открыть с помощью VCS (%1) + + + Make writable + Сделать записываемым + + + Save as ... + Сохранить как... + Core::HelpManager @@ -2123,65 +3159,6 @@ Would you like to overwrite them? Редактор - - Core::Internal::EditorSplitter - - Split Left/Right - Разделить горизонтально - - - Split Top/Bottom - Разделить вертикально - - - Unsplit - Объединить - - - Default Splitter Layout - Исходное размещение разделителя - - - Save Current as Default - Сохранить состояние как исходное - - - Restore Default Layout - Восстановить исходное размещение - - - Previous Document - Предыдущий документ - - - Alt+Left - Alt+Left - - - Next Document - Следующий документ - - - Alt+Right - Alt+Right - - - Previous Group - Предыдущая группа - - - Next Group - Следующая группа - - - Move Document to Previous Group - Переместить документ в предыдущую группу - - - Move Document to Next Group - Переместить документ в следующую группу - - Core::Internal::EditorView @@ -2193,24 +3170,186 @@ Would you like to overwrite them? Закрыть + + Core::Internal::ExternalTool + + Could not open tool specification %1 for reading: %2 + Не удалось открыть для чтения спецификацию %1 утилиты: %2 + + + Could not write tool specification %1: %2 + Не удалось записать спецификацию утилиты %1: %2 + + + + Core::Internal::ExternalToolConfig + + Form + + + + Add tool + Добавить утилиту + + + Add + Добавить + + + Remove tool + Удалить утилиту + + + Remove + Удалить + + + Revert tool to default + Откатить утилиту в исходное состояние + + + Reset + Сбросить + + + Description: + Описание: + + + Executable: + Программа: + + + Arguments: + Параметры: + + + Working directory: + Рабочий каталог: + + + Output: + Стандартный вывод: + + + Ignore + Игнорировать + + + Error output: + Вывод ошибок: + + + Text to pass to the executable via standard input. Leave empty if the executable should not receive any input. + Текст, оправляемый программе через стандартный ввод. Оставьте пустым, если приложению это не требуется. + + + Input: + Стандартный ввод: + + + If the tool modifies the current document, set this flag to ensure that the document is saved before running the tool and is reloaded after the tool finished. + Если утилита изменяет текущий документ, то установите флажок, чтобы документ сохранялся перед её запуском и перезагружался по завершении. + + + Modifies current document + Изменяет текущий документ + + + Add Tool + Добавить утилиту + + + Add Category + Добавить категорию + + + <html><head/><body> +<p>What to do with the executable's standard output. +<ul><li>Ignore: Do nothing with it</li><li>Show in pane: Show it in the general output pane</li><li>Replace selection: Replace the current selection in the current document with it</li></ul></p></body></html> + + <html><head/><body> +<p>Что делать со стандартным выводом приложения. +<ul><li>Игнорировать: Не делать ничего</li><li>Показать в консоли: Показать в основной панели вывода</li><li>Заменить выделенное: Заменить текущий выделенный текст в документе на этот вывод</li></ul></p></body></html> + + + <html><head><body> +<p >What to do with the executable's standard error output.</p> +<ul><li>Ignore: Do nothing with it</li> +<li>Show in pane: Show it in the general output pane</li> +<li>Replace selection: Replace the current selection in the current document with it</li> +</ul></body></html> + <html><head/><body> +<p>Что делать со стандартным выводом ошибок приложения. +<ul><li>Игнорировать: Не делать ничего</li><li>Показать в консоли: Показать в основной панели вывода</li><li>Заменить выделенное: Заменить текущий выделенный текст в документе на этот вывод</li></ul></p></body></html> + + + Show in Pane + Показать в консоли + + + Replace Selection + Заменить выделенное + + + + Core::Internal::ExternalToolModel + + Uncategorized + Без катагории + + + Tools that will appear directly under the External Tools menu. + Утилиты, отображаемые непосредственно в меню внешних утилит. + + + New Category + Новая категория + + + New Tool + Новая утилита + + + This tool prints a line of useful text + Этаутилита выводит строку полезного текста + + + /c echo Useful text + /c echo Полезный текст + + + Useful text + Полезный текст + + + + Core::Internal::ExternalToolRunner + + Could not find executable for '%1' (expanded '%2') + + Не удалось найти программу для «%1» (полностью «%2») + + + + Starting external tool '%1' %2 + Запускается внешняя утилита '%1' %2 + + + '%1' finished + «%1» завершилась + + Core::Internal::GeneralSettings Reset to default Сбросить к исходному состоянию - - R - С - Terminal: Терминал: - - External editor: - Внешний редактор: - ? ? @@ -2259,10 +3398,6 @@ Would you like to overwrite them? System Система - - Default file encoding: - Кодировка файла по умолчанию: - Always Ask Всегда спрашивать @@ -2275,6 +3410,10 @@ Would you like to overwrite them? Ignore Modifications Игнорировать изменения + + Reset + Сбросить + Core::Internal::MainWindow @@ -2367,7 +3506,7 @@ Would you like to overwrite them? В&ставить - &Select All + Select &All Вы&делить всё @@ -2431,6 +3570,82 @@ Would you like to overwrite them? Основные сообщения + + Core::Internal::MimeTypeMagicDialog + + Magic Header + Заголовок-признак + + + Error + Ошибка + + + Not a valid byte pattern. + Неверный шаблон байта. + + + + Core::Internal::MimeTypeSettings + + MIME Types + Типы MIME + + + + Core::Internal::MimeTypeSettingsModel + + MIME Type + Тип MIME + + + Handler + Обработчик + + + Undefined + Неопределён + + + Invalid MIME Type + Неверный тип MIME + + + Conflicting pattern(s) will be discarded. + Конфликтующие шаблоны будут опущены. + + + %n pattern(s) already in use. + + %n шаблон уже используется. + %n шаблона уже используются. + %n шаблонов уже используются. + + + + + Core::Internal::MimeTypeSettingsPrivate + + Error + Ошибка + + + No MIME type selected. + Тип MIME не выбран. + + + No magic header selected. + Заголовок-признак не выбран. + + + MIME Types + Типы MIME + + + Changes will take effect in the next time you start Qt Creator. + Изменения вступят в силу при следующем запуске Qt Creator. + + Core::Internal::NavigationSubWidget @@ -2471,17 +3686,17 @@ Would you like to overwrite them? Open Documents Открытые документы - - Close %1 - Закрыть %1 - Close Editor Закрыть документ - Close All Except %1 - Закрыть все, кроме %1 + Close "%1" + Закрыть «%1» + + + Close All Except "%1" + Закрыть всё, кроме «%1» Close Other Editors @@ -2503,7 +3718,7 @@ Would you like to overwrite them? Core::Internal::OpenWithDialog Open file '%1' with: - Открыть файл '%1' с помощью: + Открыть файл «%1» с помощью: @@ -2605,89 +3820,6 @@ Would you like to overwrite them? Параметры - - Core::Internal::SftpChannelPrivate - - Server could not start sftp subsystem. - Серверу не удалось запустить подсистему sftp. - - - Unexpected packet of type %1. - Неожиданный пакет типа %1. - - - Protocol version mismatch: Expected %1, got %2 - Недопустимая версия протокола: требуется %1, а фактически %2 - - - Unknown error. - Неизвестная ошибка. - - - Created remote directory '%1'. - Создан внешний каталог "%1". - - - Remote directory '%1' already exists. - Внешний каталог "%1" уже существует. - - - Error creating directory '%1': %2 - Ошибка создания каталога "%1": %2 - - - Could not open local file '%1': %2 - Не удалось открыть локальный файл "%1": %2 - - - Remote directory could not be opened for reading. - Не удалось открыть внешний каталог для чтения. - - - Failed to list remote directory contents. - Не удалось список файлов внешнего каталога. - - - Failed to close remote directory. - Не удалось закрыть внешний каталог. - - - Failed to open remote file for reading. - Не удалось открыть внешний файл для чтения. - - - Failed retrieve information on the remote file ('stat' failed). - Не удалось получить информацию о внешнем файле (ошибка 'stat'). - - - Cannot append to remote file: Server does not support the file size attribute. - Не удалось добавить к внешнему файлу: сервер не поддерживает атрибут размера файла. - - - Failed to read remote file. - Не удалось прочитать внешний файл. - - - Failed to close remote file. - Не удалось закрыть внешний файл. - - - Failed to open remote file for writing. - Не удалось открыть внешний файл для записи. - - - Failed to write remote file. - Не удалось записать во внешний файл. - - - Server could not start session. - Серверу не удалось запустить сессию. - - - Error reading local file: %1 - Ошибка чтения локального файла: %1 - - Core::Internal::ShortcutSettings @@ -2730,64 +3862,6 @@ Would you like to overwrite them? Закрыть - - Core::Internal::SshChannelManager - - Invalid channel id %1 - Неверный идентификатор канала %1 - - - - Core::Internal::SshConnectionPrivate - - SSH Protocol error: %1 - Ошибка протокола SSH: %1 - - - Botan library exception: %1 - Исключение библиотеки Botan: %1 - - - Invalid protocol version: Expected '2.0', got '%1'. - Недопустимая версия протокола: требуется "2.0", а фактически "%1". - - - Invalid server id '%1'. - Недопустимый идентификатор "%1". - - - Unexpected packet of type %1. - Неожиданный пакет типа %1. - - - Could not read private key file: %1 - Не удалось прочитать файл секретного ключа: %1 - - - Password expired. - Время действия пароля истекло. - - - Server rejected password. - Сервер отклонил пароль. - - - Server rejected key. - Сервер отклонил ключ. - - - Server closed connection: %1 - Сервер закрыл подключение: %1 - - - Connection closed unexpectedly. - Соединение неожиданно закрылось. - - - Timeout waiting for reply from server. - Вышло время ожидания ответа от сервера. - - Core::Internal::SystemEditor @@ -2795,6 +3869,13 @@ Would you like to overwrite them? Не удалось открыть ссылку %1. + + Core::Internal::ToolSettings + + External Tools + Внешние утилиты + + Core::Internal::VersionDialog @@ -2857,6 +3938,34 @@ Would you like to overwrite them? Новый %1 + + Core::VariableChooser + + Variables + Переменные + + + Select a variable to insert. + Выберите переменную для вставки. + + + Insert variable + Вставить переменную + + + + Core::VcsManager + + Version Control + Контроль версий + + + Would you like to remove this file from the version control system (%1)? +Note: This might remove the local file. + Отменить контроль версий (%1) для этого файла? +Замечание: Это может привести к удалению файла. + + CppEditor @@ -2879,7 +3988,7 @@ Would you like to overwrite them? - CppEditor::Internal::CPPEditor + CppEditor::Internal::CPPEditorWidget Sort Alphabetically Сортировать по алфавиту @@ -2930,6 +4039,17 @@ Would you like to overwrite them? Подробнее + + CppEditor::Internal::CppOutlineTreeView + + Expand All + Развернуть всё + + + Collapse All + Свернуть всё + + CppEditor::Internal::CppPlugin @@ -2989,6 +4109,13 @@ Would you like to overwrite them? Ctrl+Shift+U + + CppEditor::Internal::CppSnippetProvider + + C++ + + + CppEditor::Internal::CppTypeHierarchyFactory @@ -3003,6 +4130,13 @@ Would you like to overwrite them? Иерархия типов недоступна + + CppEditor::Internal::InsertQtPropertyMembers + + Generate missing Q_PROPERTY members... + Создание отсутствующих членов Q_PROPERTY... + + CppFileSettingsPage @@ -3075,13 +4209,13 @@ Would you like to overwrite them? ** Шаблон лицензии заголовочного файлы Qt Creator ** Специальные ключевые слова: %USER% %DATE% %YEAR% ** Переменные среды: %$VARIABLE% -** Если требуется символ "процент", то используйте '%%'. +** Если требуется символ «процент», то используйте «%%». **************************************************************************/ - Edit... - Изменить... + Edit + Изменить Choose Location for New License Template File @@ -3128,6 +4262,10 @@ Would you like to overwrite them? Parsing Разбор + + unnamed + безымянный + CppTools::Internal::CppToolsPlugin @@ -3278,36 +4416,48 @@ Would you like to overwrite them? <Encoding error> <Ошибка кодировки> - - - Debugger::Cdb - Unable to load the debugger engine library '%1': %2 - Не удалось загрузить библиотеку отладчика "%1": %2 + Debugging Helper + Помощник отладчика - Unable to resolve '%1' in the debugger engine library '%2' - Отсутствует символ "%1" в библиотеке отладчика "%2" + Choose DebuggingHelper Location + Выберите размещение помощника + + + Ctrl+Shift+F11 + + + + + Debugger::Cdb::CdbBreakEventWidget + + C++ exception + Исключение C++ + + + Thread creation + Создание потока + + + Thread exit + Завершение потока + + + Load Module: + Загрузка модуля: + + + Unload Module: + Выгрузка модуля: + + + Output: + Вывод: Debugger::DebuggerEngine - - Symbol - Символ - - - Address - Адрес - - - Code - Код - - - Symbols in "%1" - Символы в "%1" - Launching Запуск @@ -3317,86 +4467,117 @@ Would you like to overwrite them? %1 (установлено в параметрах отладчика) - Open Qt4 Options - Открыть опции Qt4 + This debugger cannot handle user input. + Этот отладчик не поддерживает пользовательский ввод. - Turn off Helper Usage - Не использовать помощника + Watchpoint %1 (%2) at 0x%3 triggered. + Сработала контрольная точка %1 (%2) на 0x%3. - Continue Anyway - Всё равно продолжить + Internal watchpoint %1 at 0x%2 triggered. + Сработала внутренняя контрольная точка %1 на 0x%2. - Debugging Helper Missing - Отсутствует помощник отладчика + Watchpoint %1 (%2) at 0x%3 in thread %4 triggered. + Сработала контрольная точка %1 (%2) на 0x%3 в потоке %4. - The debugging helper is used to nicely format the values of some Qt and Standard Library data types. It must be compiled for each used Qt version separately. On the Qt4 options page, select a Qt installation and click Rebuild. - Помощник отладчика используется для преобразования значений некоторых типов данных Qt и стандартной библиотеки к наглядному виду. Он должен быть собран отдельно для каждой версии Qt. Это можно сделать в опциях Qt4, выбрав профиль Qt и нажав на 'Пересобрать' в строке 'Помощник отладчика'. + Internal watchpoint %1 at 0x%2 in thread %3 triggered. + Сработала внутренняя контрольная точка %1 на 0x%2 в потоке %3. - The debugger could not load the debugging helper library. - Отладчик не смог загрузить библиотеку помощника отладчика. + Stopped at breakpoint %1 (%2) in thread %3. + Остановлено на точке останова %1 (%2), поток %3. + + + Stopped at internal breakpoint %1 in thread %2. + Остановлено на внутренней точке останова %1, поток %2. + + + Stopped. + Остановлено. + + + Stopped: "%1" + Остановлено: «%1» + + + Stopped: %1 (Signal %2). + Остановлено: %1 (сигнал %2). + + + Stopped in thread %1 by: %2. + Поток %1 остановлен по причине: %2. + + + Interrupted. + Прервано. + + + <Unknown> + name + <Неизвестно> + + + <Unknown> + meaning + <Неизвестно> + + + <p>The inferior stopped because it received a signal from the Operating System.<p><table><tr><td>Signal name : </td><td>%1</td></tr><tr><td>Signal meaning : </td><td>%2</td></tr></table> + <p>Приложение остановлено, так как оно получило сигнал от операционной системы.<p><table><tr><td>Сигнал: </td><td>%1</td></tr><tr><td>Назначение: </td><td>%2</td></tr></table> + + + Signal received + Получен сигнал + + + <p>The inferior stopped because it triggered an exception.<p>%1 + <p>Приложение остановлено из-за исключения.<p>%1 + + + Exception Triggered + Возникло исключение Taking notice of pid %1 Получено уведомление от pid %1 - - - Debugger::DebuggerEnginePrivate - Remove Breakpoint - Удалить точку останова + Run to Address 0x%1 + Выполнить до адреса 0x%1 - Remove Breakpoint %1 - Удалить точку останова %1 + Run to Line %1 + Выполнить до строки %1 - Disable Breakpoint - Отключить точку останова + Jump to Address 0x%1 + Перейти на адрес 0x%1 - Disable Breakpoint %1 - Отключить точку останова %1 - - - Enable Breakpoint - Включить точку останова - - - Enable Breakpoint %1 - Включить точку останова %1 - - - Edit Breakpoint... - Изменить точку останова... - - - Edit Breakpoint %1... - Изменить точку останова %1... - - - Set Breakpoint at 0x%1 - Установить точку останова на 0x%1 - - - Set Breakpoint at line %1 - Установить точку останова на строку %1 + Jump to Line %1 + Перейти к строке %1 Debugger::DebuggerPlugin - Option '%1' is missing the parameter. - У настройки "%1" пропущен параметр. + Debug + Отладка - The parameter '%1' of option '%2' is not a number. - Параметр "%1" настройки "%2" не является числом. + Option '%1' is missing the parameter. + У настройки «%1» пропущен параметр. + + + The parameter '%1' of option '%2' does not match the pattern <server:port>@<executable>@<architecture>. + Параметр «%1» настройки «%2» не соответствует шаблону <сервер:порт>@<программа>@<архитектура>. + + + The parameter '%1' of option '%2' does not match the pattern <handle>:<pid>. + Параметр «%1» настройки «%2» не соответствует шаблону <handle>:<pid>. Invalid debugger option: %1 @@ -3404,194 +4585,35 @@ Would you like to overwrite them? The application requires the debugger engine '%1', which is disabled. - Приложению требуется движок отладчика "%1", который отключён. - - - - Debugger::DebuggerPluginPrivate - - Continue - Продолжить + Приложению необходим отладчик «%1», отключённый в данный момент. - Interrupt - Прервать + The debugger engine '%1' is disabled. + Отладчик «%1» отключён. - Debugger is Busy - Отладчик занят + The debugger engine '%1' required for debugging binaries of the type '%2' is not configured correctly. + Отладчик «%1», необходимый для отладки программ типа «%2», настроен неверно. - Abort Debugging - Прервать отладку + None of the debugger engines '%1' capable of debugging binaries of the type '%2' is configured correctly. + Ни один из отладчиков «%1», способных отлаживать программы типа «%2», не настроен верно. - Aborts debugging and resets the debugger to the initial state. - Прервать отладку и сбросить отладчик в исходное состояние. - - - Step Over - Перейти через - - - Step Into - Войти в - - - Step Out - Выйти из функции - - - Run to Line - Выполнить до строки - - - Run to Outermost Function - Выполнить до внешней функции - - - Immediately Return From Inner Function - Немедленно выйти из функции - - - Jump to Line - Перейти на строку - - - Toggle Breakpoint - Поставить/снять точку останова - - - Add to Watch Window - Добавить в окно наблюдения - - - Reverse Direction - Обратное направление - - - Move to Called Frame - Перейти в вызванный кадр - - - Move to Calling Frame - Перейти в вызывающий кадр - - - Error evaluating command line arguments: %1 - Ошибка определения параметров командной строки: %1 - - - Start and Debug External Application... - Запустить внешнее приложение для отладки... - - - Attach to Running External Application... - Подключить к запущенному внешнему приложению... - - - Attach to Core... - Подключить к дампу... - - - Attach to Running Tcf Agent... - Подключить к запущенному агенту Tcf... - - - This attaches to a running 'Target Communication Framework' agent. - Подключает к работающему агенту "Target Communication Framework". - - - Start and Attach to Remote Application... - Запустить и подключить к удалённому приложению... - - - Detach Debugger - Отцепить отладчик - - - Reset Debugger - Сбросить отладчик - - - Threads: - Потоки: - - - Warning - Предупреждение - - - Cannot attach to PID 0 - Невозможно подключиться к PID 0 - - - Remote: "%1" - Внешний: "%1" - - - Attaching to PID %1. - Подключение к PID %1. - - - Attaching to remote server %1. - Подключение к внешнему серверу %1. - - - Attaching to core %1. - Подключение к дампу %1. - - - Stop Debugger - Остановить отладчик - - - QML Script Console - Консоль сценария QML - - - Create Snapshot - Создать снимок - - - Interrupt Debugger - Прервать отладку - - - Process %1 - Процесс %1 - - - Core file "%1" - Файл дампа "%1" - - - Save Debugger Log - Сохранить журнал отладчика + The preferred debugger engine for debugging binaries of type '%1' is not available. +The debugger engine '%2' will be used as a fallback. +Details: %3 + Предпочтительный отладчик для программ типа «%1» не доступен. +В качестве него будет использоваться резервный отладчик «%2». +Подробности: %3 Debugger::DebuggerRunControl - - There is no debugging engine available for post-mortem debugging. - Отсутствует движок отладчика для системной отладки. - - - Cannot debug '%1' (tool chain: '%2'): %3 - Не удалось отладить "%1" (инструментарий: "%2"): %3 - - - Warning - Предупреждение - Debugger Отладчик - - Starting debugger '%1' for tool chain '%2'... - Запускается отладчик "%1" из инструментария "%2"... - Debugging starts Отладка запущена @@ -3614,29 +4636,18 @@ Would you like to overwrite them? - Debugger::DebuggerRunControlFactory + Debugger::Internal::AbstractDebuggerToolTipWidget - Debug - Отладка - - - - Debugger::DebuggerUISwitcher - - Memory... - Память... - - - Debugger Toolbar - Панель отладчика + Previous + Назад Debugger::Internal::AbstractGdbAdapter - The Gdb process could not be stopped: + The gdb process could not be stopped: %1 - Невозможно остановить процесс Gdb: + Невозможно остановить процесс gdb: %1 @@ -3732,25 +4743,18 @@ Qt Creator не может подключиться к нему. - Debugger::Internal::AttachTcfDialog + Debugger::Internal::BreakCondition - Select Executable - Выбор программы - - - - Debugger::Internal::BinaryToolChainDialog - - Select binary and toolchains - Выбор программы и инструментария + &Condition: + &Условие: - Gdb binary - Программа gdb + &Ignore count: + &Количество пропусков: - Path: - Путь: + &Thread specification: + &Спецификация потока: @@ -3767,6 +4771,99 @@ Qt Creator не может подключиться к нему. Breakpoint Number: Номер точки останова: + + New + Новая + + + Insertion requested + Потребована вставка + + + Insertion proceeding + Вставка выполняется + + + Change requested + Потребовано изменение + + + Change proceeding + Изменение выполняется + + + Breakpoint inserted + Точка останова вставлена + + + Removal requested + Потребовано удаление + + + Removal proceeding + Удаление выполняется + + + Dead + Удалена + + + <invalid state> + Invalid breakpoint state. + <неверное состояние> + + + Breakpoint at "%1" + Точка останова на «%1» + + + Breakpoint by File and Line + Точка останова по файлу и строке + + + Breakpoint by Function + Точка останова по функции + + + Breakpoint by Address + Точка останова по адресу + + + Breakpoint at Function "main()" + Точка останова на функции «main()» + + + Unknown Breakpoint Type + Неизвестный тип точки останова + + + Watchpoint at 0x%1 + Контрольная точка на 0x%1 + + + Enabled + Включена + + + Disabled + Отключена + + + , pending + , ожидает + + + Engine: + Отладчик: + + + Extra Information: + Дополнительно: + + + Corrected Line Number: + Исправленный номер строки: + Breakpoint Address: Адрес точки останова: @@ -3779,17 +4876,9 @@ Qt Creator не может подключиться к нему. Breakpoint Type: Тип точки останова: - - Breakpoint - Точка останова - Watchpoint - Точка наблюдения - - - Unknown breakpoint type - Неизвестный тип точки останова + Контрольная точка State: @@ -3820,8 +4909,16 @@ Qt Creator не может подключиться к нему. Номер строки: - Corrected Line Number: - Исправленный номер строки: + Module: + Модуль: + + + Multiple Addresses: + Несколько адресов: + + + Command: + Команда: Condition: @@ -3900,7 +4997,7 @@ Qt Creator не может подключиться к нему. Delete Breakpoints of "%1" - Удалить точки останова в файле "%1" + Удалить точки останова в файле «%1» Delete Breakpoints of File @@ -3910,10 +5007,6 @@ Qt Creator не может подключиться к нему. Adjust Column Widths to Contents Выравнить ширину столбцов по содержимому - - Always Adjust Column Widths to Contents - Всегда выравнивать ширину столбцов по содержимому - Edit Breakpoint... Изменить точку останова... @@ -3951,16 +5044,8 @@ Qt Creator не может подключиться к нему. Добавить точку останова... - Edit Breakpoint Properties - Изменить свойства точки останова - - - Set Breakpoint at "throw" - Установить точку останова на "throw" - - - Set Breakpoint at "catch" - Установить точку останова на "catch" + Add Breakpoint + Добавить точку останова @@ -3974,13 +5059,136 @@ Qt Creator не может подключиться к нему. Название функции - Function "main()" - Функция "main()" + Break when C++ Exception is Thrown + Остановиться при возникновении исключения C++ + + + Break when C++ Exception is Caught + Остановиться при поимке исключения C++ + + + Break when Function "main()" Starts + Остановиться при запуске функции «main()» + + + Break when a new Process is Forked + Остановиться при создании нового процесса + + + Break when a new Process is Executed + Остановиться при запуске нового процесса + + + Break when a System Call is Executed + Остановиться при выполнении системного вызова + + + Break on Data Access (Watchpoint) + Остановиться при доступе к данным (контрольная точка) + + + Specifying the module (base name of the library or executable) +for function or file type breakpoints can significantly speed up +debugger start-up times (CDB, LLDB). + Указание модуля (имени библиотеки или программы) для +точек останова на функциях или исходниках может значительно +повысить скорость запуска отладчика (CDB, LLDB). + + + Debugger command to be executed when the breakpoint is hit. +GDB allows for specifying a sequence of commands separated by the delimiter '\n'. + Команда отладчика, исполняемая при срабатывании точки останова. +GDB позволяет указывать последовательность команд, разделённых «\n». + + + <html><head/><body><p>Determines how the path is specified when setting breakpoints:</p><ul><li><i>Use Engine Default</i>: Preferred setting of the debugger engine.</li><li><i>Use Full Path</i>: Pass full path, avoiding ambiguities should files of the same name exist in several modules. This is the engine default for CDB and LLDB.</li><li><i>Use File Name</i>: Pass the file name only. This is useful when using a source tree whose location does not match the one used when building the modules. It is the engine default for GDB as using full paths can be slow with this engine.</li></ul></body></html> + <html><head/><body> +<p>Определяет, как задаётся путь при установке точек останова:</p> +<ul><li><i>По умолчанию</i>: Предпочтительный для отладчика вариант.</li> +<li><i>Полный</i>: Путь будет передаваться полностью, что исключит проблемы файлов с одинаковыми именами. По умолчанию для CDB и LLDB.</li> +<li><i>Только имя файла</i>: Передаваться будет только имя файла. Наилучший вариант при сборке модулей в отдельном от исходников каталоге. По умолчанию для GDB, для которого использование полных путей приводит к замедлению работы.</li></ul> +</body></html> Address Адрес + + Edit Breakpoint Properties + Изменение свойств точки останова + + + Basic + Основное + + + Breakpoint &type: + &Тип точки останова: + + + &File name: + &Имя файла: + + + &Line number: + &Номер строки: + + + &Enabled: + &Включено: + + + &Address: + &Адрес: + + + Fun&ction: + &Функция: + + + Advanced + Дополнительно + + + T&racepoint only: + Только т&рассировка: + + + &Module: + &Модуль: + + + &Command: + &Команда: + + + C&ondition: + &Условие: + + + &Ignore count: + Ко&личество пропусков: + + + Pat&h: + Пут&ь: + + + Use Engine Default + По умолчанию + + + Use Full Path + Полный + + + Use File Name + Только имя файла + + + &Thread specification: + &Спецификация потока: + Debugger::Internal::CacheDirectoryDialog @@ -3998,7 +5206,7 @@ Qt Creator не может подключиться к нему. A file named '%1' already exists. - Файл с именем "%1" уже существует. + Файл с именем «%1» уже существует. Cannot Create @@ -4006,233 +5214,70 @@ Qt Creator не может подключиться к нему. The folder '%1' could not be created. - Невозможно создать каталог "%1". - - - - Debugger::Internal::CdbDumperHelper - - injection - внедрение - - - debugger call - вызов отладчика - - - Loading the custom dumper library '%1' (%2) ... - Загружается особая библиотека дампера '%1' (%2)... - - - Loading of the custom dumper library '%1' (%2) failed: %3 - Загрузка особой библиотеки дампера '%1' (%2) не удалась: %3 - - - Loaded the custom dumper library '%1' (%2). - Загружена особая библиотека дампера '%1' (%2). - - - Stopped / Custom dumper library initialized. - Остановлено / инициализирована библиотека особого дампера. - - - Disabling dumpers due to debuggee crash... - Отключение дамперов из-за сбоя отлаживаемой программы... - - - The debuggee does not appear to be Qt application. - Отлаживаемая программа не является приложением Qt. - - - Initializing dumpers... - Инициализация дамперов... - - - The custom dumper library could not be initialized: %1 - Не удалось инициализировать библиотеку дампера: %1 - - - Querying dumpers for '%1'/'%2' (%3) - Запрос дамперов для '%1'/'%2' (%3) + Невозможно создать каталог «%1». Debugger::Internal::CdbEngine - The function "%1()" failed: %2 - Function call failed - Сбой функции "%1()": %2 + The CDB debug engine required for %1 is currently disabled. + Отладчик CDB, необходимый для инструментария %1, сейчас отключён. - An instance of the CDB engine is still running; cannot create an a new instance. - Уже запущен экземпляр отладчика GDB. Запустить ещё один невозможно. + There is no CDB binary available for binaries in format '%1' + Отсутствует CDB для программ в формате «%1» - Version: %1 - Версия: %1 + The CDB engine does not support start mode %1. + Отладчик CDB не поддерживает режим запуска %1. - <html>The installed version of the <i>Debugging Tools for Windows</i> (%1) is rather old. Upgrading to version %2 is recommended for the proper display of Qt's data types.</html> - <html>Установлена слишком старая версия <i>Debugging Tools for Windows</i> (%1). Рекомендуется обновить до версии %2 для корректного отображения типов данных Qt.</html> + The CDB debug engine does not support the %1 ABI. + Отладчик CDB не поддерживает ABI %1. - Debugger - Отладчик - - - <html><head/><body><p>The debugger is not configured to use the public <a href="%1">Microsoft Symbol Server</a>. This is recommended for retrieval of the symbols of the operating system libraries.</p><p><i>Note:</i> A fast internet connection is required for this to work smoothly. Also, a delay might occur when connecting for the first time.</p><p>Would you like to set it up?</p></br></body></html> - <html><head/><body><p>Отладчик не настроен на использование публичного <a href="%1">сервера символов Microsoft</a>. Это рекомендуется для получения символов системных библиотек.</p><p>Для комфортной работы необходимо быстрое соединение с Internet. Также возможна задержка при первом подключении.</p><p>Желаете настроить?</p></br></body></html> - - - Symbol Server - Сервер символов - - - Do not ask again - Больше не спрашивать - - - The dumper library was not found at %1. - Библиотека дампера не найдена в %1. - - - The console stub process was unable to start '%1'. - Не удалось запустить процесс консоли '%1'. - - - The process exited with exit code %1. - Процесс завершился с кодом %1. - - - <not supported> - <не поддерживается> - - - Continuing with '%1'... - Продолжение '%1'... - - - Unable to continue: %1 - Не удалось продолжить: %1 - - - Reverse stepping is not implemented. - Реверсивное движение не реализовано. - - - Thread %1 cannot be stepped. - Невозможно двигаться по потоку %1. - - - Stepping %1 - Шаг %1 - - - Running requested... - Потребовано выполнение... - - - Running up to %1:%2... - Выполнение до строки %1:%2... - - - Running up to function '%1()'... - Выполнение до функции '%1()'... - - - Jump to line is not implemented - Переход на строку не реализован - - - Assigning '%1' to '%2' (%3)... - Arguments: New value, name, (type) - Присваивание "%2" (%3) значения "%1"... - - - Can assign only scalar values. - Можно присваивать только скалярные значения. - - - Cannot assign values of type '%1'. Only POD-types can be assigned. - Нельзя присваивать значения типа "%1". Присваивать можно только POD-типы. - - - Unable to assign the value '%1' to '%2' (%3): %4 - Arguments: New value, name, (type): Error - Невозможно присвоить "%2" значение "%1" (%3): %4 - - - The CDB debug engine does not support the %1 toolchain. - %1 is something like "GCCE" or "Intel C++ Compiler (Linux)" (see ToolChain context) - Движок отладчика CDB не поддерживает инструментарий %1. - - - Attaching to core files is not supported. - Подключение к файлам дампа не поддерживается. - - - Unable to retrieve %1 bytes of memory at 0x%2: %3 - Не удалось получить %1 байт памяти начиная с 0x%2: %3 - - - Cannot retrieve symbols while the debuggee is running. - Не удалось получить символы во время работы отлаживаемой программы. + The console process '%1' could not be started. + Не удалось запустить процесс «%1». Debugger Error Ошибка отладчика - Ignoring initial breakpoint... - Начальная точка останова пропущена... + There is no CDB executable specified. + Программа CDB не указана. - <interrupt thread> - <прерывание потока> + CDB crashed + CDB завершился крахом - Breakpoint - Точка останова + CDB exited (%1) + CDB завершился (%1) - Interrupted in thread %1, current thread: %2 - Прервано в потоке %1, текущий поток: %2 + Unable to add expression + Не удалось добавить выражение - Stopped, current thread: %1 - Остановлено, текущий поток: %1 + Interrupting is not possible in remote sessions. + Прерывание в удалённых сессиях невозможно. - Changing threads: %1 -> %2 - Смена потоков: %1 -> %2 + Malformed stop response received. + Получен неверный ответ на требование остановки. - stopped - остановлен + Switching to main thread... + Переключение в основной поток... - Stopped at %1:%2 in thread %3. - Остановлено на %1:%2 в потоке %3. + "Select Widget to Watch": Please stop the application first. + «Выбрать виджет для слежения»: Сначала остановить приложение. - Stopped at %1 in thread %2 (missing debug information). - Остановлено на %1 в потоке %2 (нет отладочной информации). - - - Stopped at %1 (%2) in thread %3 (missing debug information). - Остановлено на %1 (%2) в потоке %3 (нет отладочной информации). - - - Stopped in thread %1 (missing debug information). - Остановлено в потоке %1 (нет отладочной информации). - - - Breakpoint: %1 - Точка остановка: %1 - - - Watchpoint: %1 - Точка наблюдения: %1 + "Select Widget to Watch": Not supported in state '%1'. + «Выбрать виджет для слежения»: Не поддерживается в состоянии «%1». @@ -4245,35 +5290,29 @@ Qt Creator не может подключиться к нему. Debugger::Internal::CdbOptionsPageWidget - <html><body><p>Specify the path to the <a href="%1">Debugging Tools for Windows</a> (%2) here.</p><p><b>Note:</b> Restarting Qt Creator is required for these settings to take effect.</p></p></body></html> - Label text for path configuration. %2 is "x-bit version". - <html><body><p>Укажите путь к <a href="%1">Debugging Tools for Windows</a> (%2).</p><p><b>Замечание:</b> Для вступления изменений в силу необходим перезапуск Qt Creator.</p></p></body></html> + Debugger Paths + Пути отладчика - 64-bit version - 64-х битная версия + Break on: + Остановка на: - 32-bit version - 32-х битная версия + Additional &arguments: + &Дополнительные параметры: - Autodetect - Автоопределение + &Symbol paths: + Пути к &символам: - "Debugging Tools for Windows" could not be found. - Не удалось обнаружить "Debugging Tools for Windows". + S&ource paths: + Пути к &исходникам: - Checked: -%1 - Проверено: -%1 - - - Autodetection - Автоопределение + Startup + Placeholder + Запуск @@ -4286,6 +5325,31 @@ Qt Creator не может подключиться к нему. Adds the Microsoft symbol server providing symbols for operating system libraries.Requires specifying a local cache directory. Добавляет сервер символов Microsoft, который предоставляет символы для файлов операционной системы. Требует указания каталога локального кэша. + + <html><head/><body><p>The debugger is not configured to use the public <a href="%1">Microsoft Symbol Server</a>. This is recommended for retrieval of the symbols of the operating system libraries.</p><p><i>Note:</i> A fast internet connection is required for this to work smoothly. Also, a delay might occur when connecting for the first time.</p><p>Would you like to set it up?</p></br></body></html> + <html><head/><body><p>Отладчик не настроен на использование публичного <a href="%1">сервера символов Microsoft</a>. Рекомендуется настроить для получения символов системных библиотек.</p><p>Для комфортной работы необходимо быстрое соединение с Internet. Также возможна задержка при первом подключении.</p><p>Желаете настроить?</p></br></body></html> + + + Symbol Server + Сервер символов + + + Do not ask again + Больше не спрашивать + + + + Debugger::Internal::CodaGdbAdapter + + Process started, PID: 0x%1, thread id: 0x%2, code segment: 0x%3, data segment: 0x%4. + Процесс запущен, PID: 0x%1, ID потока: 0x%2, сегмент кода: 0x%3, сегмент данных: 0x%4. + + + Connecting to CODA server adapter failed: + + Не удалось подключиться к адаптеру CODA сервера: + + Debugger::Internal::Console @@ -4297,18 +5361,6 @@ Qt Creator не может подключиться к нему. Save Contents Сохранить содержимое - - Log File - Файл журнала - - - Write Failure - Ошибка записи - - - Unable to write log contents to '%1': %2 - Не удалось записать журнал в "%1": %2 - Debugger::Internal::ConsoleWindow @@ -4358,15 +5410,19 @@ Qt Creator не может подключиться к нему. Attach to core "%1" failed: - Не удалось подключиться к дампу "%1": + Не удалось подключиться к дампу «%1»: - Debugger::Internal::DebugMode + Debugger::Internal::DebuggerMainWindowPrivate - Debug - Отладка + Memory... + Память... + + + Debugger Toolbar + Панель отладчика @@ -4379,17 +5435,272 @@ Qt Creator не может подключиться к нему. Save Contents Сохранить содержимое + + + Debugger::Internal::DebuggerPluginPrivate - Log File - Файл журнала + QML Script Console + Консоль сценария QML - Write Failure - Ошибка записи + Continue + Продолжить - Unable to write log contents to '%1': %2 - Не удалось записать журнал в "%1": %2 + Exit Debugger + Выйти из отладчика + + + Interrupt + Прервать + + + Debugger is Busy + Отладчик занят + + + Abort Debugging + Прервать отладку + + + Aborts debugging and resets the debugger to the initial state. + Прервать отладку и сбросить отладчик в исходное состояние. + + + Step Over + Перейти через + + + Step Into + Войти в + + + Step Out + Выйти из функции + + + Run to Line + Выполнить до строки + + + Immediately Return From Inner Function + Немедленно выйти из функции + + + Jump to Line + Перейти на строку + + + Toggle Breakpoint + Поставить/снять точку останова + + + Add to Watch Window + Добавить в окно наблюдения + + + Reverse Direction + Обратное направление + + + Move to Called Frame + Перейти в вызванный кадр + + + Move to Calling Frame + Перейти в вызывающий кадр + + + Error evaluating command line arguments: %1 + Ошибка определения параметров командной строки: %1 + + + No function selected. + Функция не выбрана. + + + Running to function "%1". + Выполнение до функции «%1». + + + Attaching to local process %1. + Подключение к локальному процессу %1. + + + Attaching to core file %1. + Подключение к дампу %1. + + + Crashed process %1 + Завершившийся крахом процесс %1 + + + Attaching to crashed process %1 + Подключение к завершившемуся крахом процессу %1 + + + Run to Selected Function + Выполнить до выбранной функции + + + Start Debugging + Начать отладку + + + Start and Debug External Application... + Запустить внешнее приложение для отладки... + + + Start and Debug External Application with External Engine... + Запустить внешнее приложение для отладки под внешним отладчиком... + + + Attach to Running External Application... + Подключить к запущенному внешнему приложению... + + + Attach to Core... + Подключить к дампу... + + + Start and Attach to Remote Application... + Запустить и подключить к удалённому приложению... + + + Attach to Remote CDB Session... + Подключиться к удалённой сессии CDB... + + + Detach Debugger + Отцепить отладчик + + + Stop Debugger + Остановить отладчик + + + Interrupt Debugger + Прервать отладку + + + Reset Debugger + Сбросить отладчик + + + Threads: + Потоки: + + + Warning + Внимание + + + Cannot attach to PID 0 + Невозможно подключиться к PID 0 + + + Process %1 + Процесс %1 + + + Core file "%1" + Файл дампа «%1» + + + Remote: "%1" + Внешний: «%1» + + + Attaching to remote server %1. + Подключение к внешнему серверу %1. + + + Remove Breakpoint %1 + Удалить точку останова %1 + + + Disable Breakpoint %1 + Отключить точку останова %1 + + + Enable Breakpoint %1 + Включить точку останова %1 + + + Edit Breakpoint %1... + Изменить точку останова %1... + + + Set Breakpoint at 0x%1 + Установить точку останова на 0x%1 + + + Set Breakpoint at line %1 + Установить точку останова на строку %1 + + + Save Debugger Log + Сохранить журнал отладчика + + + User commands are not accepted in the current state. + Команды пользователя в этом режиме не принимаются. + + + Open Qt4 Options + Открыть опции Qt4 + + + Turn off Helper Usage + Не использовать помощника + + + Continue Anyway + Всё равно продолжить + + + Debugging Helper Missing + Отсутствует помощник отладчика + + + The debugger could not load the debugging helper library. + Отладчик не смог загрузить библиотеку помощника отладчика. + + + The debugging helper is used to nicely format the values of some Qt and Standard Library data types. It must be compiled for each used Qt version separately. On the Qt4 options page, select a Qt installation and click Rebuild. + Помощник отладчика используется для преобразования значений некоторых типов данных Qt и стандартной библиотеки к наглядному виду. Он должен быть собран отдельно для каждой версии Qt. Это можно сделать в опциях Qt4, выбрав профиль Qt и нажав на «Пересобрать» в строке «Помощник отладчика». + + + Starting debugger '%1' for ABI '%2'... + Запускается отладчик «%1» для ABI «%2»... + + + Debugger finished. + Отладчик завершился. + + + Symbol + Символ + + + Address + Адрес + + + Code + Код + + + Section + Секция + + + Name + Название + + + Symbols in "%1" + Символы в «%1» @@ -4408,10 +5719,6 @@ Qt Creator не может подключиться к нему. Debugger Properties... Параметры отладчика... - - Adjust Column Widths to Contents - Выравнить ширину столбцов по содержимому - Always Adjust Column Widths to Contents Всегда выравнивать ширину столбцов по содержимому @@ -4438,7 +5745,7 @@ Qt Creator не может подключиться к нему. Show "std::" Namespace in Types - Показывать пространство имён "std::" в типах + Показывать пространство имён «std::» в типах Show Qt's Namespace in Types @@ -4452,10 +5759,6 @@ Qt Creator не может подключиться к нему. Use Debugging Helpers Использовать помощников отладчика - - Debug Debugging Helpers - Отлаживать помощников отладчика - Use Code Model Использовать модель кода @@ -4475,15 +5778,15 @@ Qt Creator не может подключиться к нему. Not all source code lines generate executable code. Putting a breakpoint on such a line acts as if the breakpoint was set on the next line that generated code. Selecting 'Adjust Breakpoint Locations' shifts the red breakpoint markers in such cases to the location of the true breakpoint. - Не все строки исходника приводят к созданию кода. Размещение на такой строке точки останова фактически приведёт к установке её на следующую строку, создавшую код. Выбор "Подстраивать размещение точек останова" сдвинет красные метки на строки, где они фактически сработают. + Не все строки исходника приводят к созданию кода. Размещение на такой строке точки останова фактически приведёт к установке её на следующую строку, создавшую код. Выбор «Подстраивать размещение точек останова» сдвинет красные метки на строки, где они фактически сработают. Break on "throw" - Остановиться на "throw" + Остановиться на «throw» Break on "catch" - Остановиться на "catch" + Остановиться на «catch» Automatically Quit Debugger @@ -4513,11 +5816,6 @@ Qt Creator не может подключиться к нему. Skip Known Frames Пропустить известные кадры - - Selecting this results in well-known but usually not interesting frames belonging to reference counting and signal emission being skipped while single-stepping. - Включение приведёт при пошаговой отладке к пропуску известных, -но неинтересных кадров (например, подсчёт ссылок и генерация сигнала). - Enable Reverse Debugging Включить реверсивную отладку @@ -4534,10 +5832,6 @@ Qt Creator не может подключиться к нему. Create Full Backtrace Вывести полный стек вызовов - - Execute Line - Выполнить строку - Use tooltips in main editor when debugging Подсказки в основном редакторе при отладке @@ -4573,61 +5867,85 @@ Qt Creator не может подключиться к нему. - Debugger::Internal::DebuggingHelperOptionPage + Debugger::Internal::DebuggerSourcePathMappingWidget - Debugging Helper - Помощник отладчика + <new source> + <исходный путь> - Choose DebuggingHelper Location - Выберите размещение помощника + <new target> + <путь назначения> - Ctrl+Shift+F11 - Ctrl+Shift+F11 + Source path + Исходный путь + + + Target path + Путь назначения + + + Add + Добавить + + + Add Qt sources... + Добавить исходники Qt... + + + Remove + Удалить + + + Source Paths Mapping + Сопоставление каталогов исходников + + + <html><head/><body><p>Mappings of source file folders to be used in the debugger can be entered here.</p><p>This is useful when using a copy of the source tree at a location different from the one at which the modules where built, for example, while doing remote debugging.</body></html> + <html><head/><body><p>Сопоставление каталогов исходников используется отладчиком.</p><p>Это нужно, когда исходники находятся в отличном от каталога сборки месте, например, при отладке удалённого приложения.</p></body></html> + + + Add a mapping for Qt's source folders when using an unpatched version of Qt. + Добавление каталогов исходников Qt при использование неизменённой версии Qt. + + + The source path contained in the executable's debug information as reported by the debugger + Путь к исходнику, заданный отладочной информацие программы + + + &Source path: + &Исходный путь: + + + The actual location of the source tree on the local machine + Фактическое размещение каталога с исходниками на локальной машине + + + &Target path: + Путь &назначения: + + + Qt Sources + Исходники Qt - Debugger::Internal::GdbChooserWidget + Debugger::Internal::DebuggerToolChainComboBox - Unable to run '%1': %2 - Не удалось запустить "%1": %2 + %1 (%2) + %1 (%2) - Binary - Программа - - - Toolchains - Инструментарий - - - Duplicate binary - Идентичная программа - - - The binary '%1' already exists. - Программа "%1" уже присутствует. + <html><head/><body><table><tr><td>ABI:</td><td><i>%1</i></td></tr><tr><td>Debugger:</td><td>%2</td></tr> + <html><head/><body><table><tr><td>ABI:</td><td><i>%1</i></td></tr><tr><td>Отладчик:</td><td>%2</td></tr> Debugger::Internal::GdbEngine - - The Gdb process crashed some time after starting successfully. - Процесс Gdb вылетел через некоторое время после успешного запуска. - The last waitFor...() function timed out. The state of QProcess is unchanged, and you can try calling waitFor...() again. У последней функции waitFor...() истекло время ожидания. Состояние QProcess не изменилось, и вы можете попробовать вызвать waitFor...() снова. - - An error occurred when attempting to write to the Gdb process. For example, the process may not be running, or it may have closed its input channel. - Возникла ошибка при отправке данных процессу Gdb. Например, процесс может уже не работать или он мог закрыть свой входной канал. - - - An error occurred when attempting to read from the Gdb process. For example, the process may not be running. - Возникла ошибка при получении данных от процесса Gdb. Например, процесс может уже не работать. - Reading %1... Чтение %1... @@ -4642,6 +5960,28 @@ You can choose between waiting longer or abort debugging. Library %1 loaded Библиотека %1 загружена + + The gdb process failed to start. Either the invoked program '%1' is missing, or you may have insufficient permissions to invoke the program. +%2 + Процесс gdb не смог запуститься. Или вызываемая программа «%1» отсутствует, или недостаточно прав на её запуск. +%2 + + + The gdb process crashed some time after starting successfully. + Процесс gdb завершился крахом через некоторое время после успешного запуска. + + + An error occurred when attempting to write to the gdb process. For example, the process may not be running, or it may have closed its input channel. + Возникла ошибка при отправке данных процессу gdb. Например, процесс может уже не работать или он мог закрыть свой входной канал. + + + An error occurred when attempting to read from the gdb process. For example, the process may not be running. + Возникла ошибка при получении данных от процесса gdb. Например, процесс может уже не работать. + + + An unknown error in the gdb process occurred. + Неизвестная ошибка возникла у процесса gdb. + Library %1 unloaded Библиотека %1 выгружена @@ -4674,6 +6014,14 @@ You can choose between waiting longer or abort debugging. Processing queued commands Обработка очереди команд + + GDB not responding + GDB не отвечает + + + Give GDB more time + Дать GDB ещё время + Process failed to start Процессу не удалось запуститься @@ -4699,37 +6047,39 @@ You can choose between waiting longer or abort debugging. Загружается %1... - Watchpoint %1 at %2 triggered: - Точка наблюдения %1 на %2 переключена: + Normal + Нормальный - Stopped at breakpoint %1 in thread %2 - Остановлено на точке останова %1 потока %2 - - - <p>The inferior stopped because it received a signal from the Operating System.<p><table><tr><td>Signal name : </td><td>%1</td></tr><tr><td>Signal meaning : </td><td>%2</td></tr></table> - <p>Приложение остановлено, так как оно получило сигнал от операционной системы.<p><table><tr><td>Сигнал: </td><td>%1</td></tr><tr><td>Назначение: </td><td>%2</td></tr></table> - - - Signal received - Получен сигнал - - - Stopped: %1 by signal %2 - Остановлено по причине %1 (сигнал %2) + Displayed + Отображённый Stopped. Остановлено. - Stopped: "%1" - Остановлено: "%1" + There is no gdb binary available for binaries in format '%1' + Отсутствует GDB для программ в формате «%1» Continuing after temporary stop... Продолжение после временного останова... + + The GDB installed at %1 cannot find a valid python installation in its %2 subdirectory. +You may set the environment variable PYTHONPATH to point to your installation. + Отладчик GDB, установленный в %1, не может найти python в его подкаталоге %2. +Можно установить переменную PYTHONPATH указывающую на установленный Python. + + + GDB I/O Error + Ошибка вводы/вывода GDB + + + Unexpected GDB Exit + Неожиданный выход GDB + The debugging helper library was not found at %1. Библиотека помощника отладчика не обнаружена в %1. @@ -4757,8 +6107,16 @@ You can choose between waiting longer or abort debugging. Закончено получение данных - There is no gdb binary available for '%1' - Отсутствует программа gdb для "%1" + Cannot read widget data: %1 + Не удалось считать данные виджета: %1 + + + Could not find a widget. + Не удалсь найти виджет. + + + The gdb location must be given as an absolute path in the debugger settings (%1). + Размещение gdb должно быть указано в настройках отладчика (%1) в виде полного пути. Cannot find debugger initialization script @@ -4766,11 +6124,7 @@ You can choose between waiting longer or abort debugging. The debugger settings point to a script file at '%1' which is not accessible. If a script file is not needed, consider clearing that entry to avoid this warning. - В настройках указан файл скрипта '%1', который сейчас недоступен. Если файл скрипта не обязателен, просто очистите поле, чтобы не было этого предупреждения. - - - Unable to run '%1': %2 - Не удалось запустить "%1": %2 + В настройках указан файл скрипта «%1», который сейчас недоступен. Если файл скрипта не обязателен, просто очистите поле, чтобы не было этого предупреждения. Retrieving data for stack view... @@ -4784,10 +6138,6 @@ You can choose between waiting longer or abort debugging. Дампер версии %1, обнаружено %n пользовательских дамперов. - - An unknown error in the Gdb process occurred. - Неизвестная ошибка возникла у процесса Gdb. - Stop requested... Потребована остановка... @@ -4797,23 +6147,25 @@ You can choose between waiting longer or abort debugging. Программа завершилась с ошибкой - Gdb not responding - Gdb не отвечает + An exception was triggered. + Возникло исключение. - The Gdb process failed to start. Either the invoked program '%1' is missing, or you may have insufficient permissions to invoke the program. -%2 - Процесс Gdb не смог запуститься. Или вызываемая программа "%1" отсутствует, или у вас нет прав на её вызов. -%2 - - - Give gdb more time - Дать gdb ещё время + An exception was triggered: + Возникло исключение: Stop debugging Прервать отладку + + Setting breakpoints failed + Не удалось установить точки останова + + + Executable Failed + Программа завершилась с ошибкой + Executable failed: %1 Программа завершилась с ошибкой: %1 @@ -4827,14 +6179,8 @@ You can choose between waiting longer or abort debugging. Строка достигнута. Остановлено - <Unknown> - name - <Неизвестный> - - - <Unknown> - meaning - <Неизвестно> + Value changed from %1 to %2. + Значение изменилось с %1 на %2. Raw structure @@ -4891,10 +6237,12 @@ You can choose between waiting longer or abort debugging. Потребован немедленный выход из функции... - <unknown> - address - End address of loaded module - <неизвестно> + Cannot Read Symbols + Не удалось прочитать символы + + + Cannot read symbols for module "%1". + Не удалось прочитать символы из модуля «%1». Retrieving data for stack view thread 0x%1... @@ -4966,24 +6314,12 @@ This might yield incorrect results. Не удалось дизассемблировать: %1 - Gdb I/O Error - Ошибка вводы/вывода gdb + The gdb process crashed. + Процесс gdb завершился крахом. - Unexpected Gdb Exit - Неожиданный выход gdb - - - The gdb process exited unexpectedly (%1). - Процесс gdb неожиданно завершился (%1). - - - crashed - завершился крахом - - - code %1 - код %1 + The gdb process exited unexpectedly (code %1) + Процесс gdb неожиданно завершился (код %1) Setting up inferior... @@ -5009,14 +6345,21 @@ This might yield incorrect results. Debugger::Internal::GdbOptionsPage - Gdb - Gdb + GDB + Choose Location of Startup Script File Выбор размещения скрипта начальных действий + + Debugger::Internal::IPCEngineHost + + Fatal engine shutdown. Incompatible binary or IPC error. + Фатальное завершение работы отладчика. Несовместимая программа или ошибка IPC. + + Debugger::Internal::InputPane @@ -5024,6 +6367,28 @@ This might yield incorrect results. Нажмите Ctrl-<Ввод> для выполнения строки. + + Debugger::Internal::LldbEngineHost + + qtcreator-lldb failed to start: %1 + Не удалось запустить qtcreator-lldb: %1 + + + Fatal engine shutdown. Consult debugger log for details. + Фатальное завершение отладчика. В его журнале должны быть подробности. + + + SSH connection error: %1 + Ошибка подключения SSH: %1 + + + + Debugger::Internal::LldbOptionsPage + + LLDB + + + Debugger::Internal::LocalPlainGdbAdapter @@ -5043,9 +6408,25 @@ Setting breakpoints by file name and line number may fail. Debugger Log Журнал отладки + + Command: + Команда: + + + Log File + Файл журнала + + + Write Failure + Ошибка записи + + + Unable to write log contents to '%1': %2 + Не удалось записать журнал в «%1»: %2 + - Debugger::Internal::MemoryViewAgent + Debugger::Internal::MemoryAgent Memory $ Память $ @@ -5105,6 +6486,12 @@ Setting breakpoints by file name and line number may fail. fast быстрый + + <unknown> + address + End address of loaded module + <неизвестный> + Debugger::Internal::ModulesWindow @@ -5118,7 +6505,7 @@ Setting breakpoints by file name and line number may fail. Show Source Files for Module "%1" - Показать исходники для модуля "%1" + Показать исходники для модуля «%1» Load Symbols for All Modules @@ -5140,25 +6527,36 @@ Setting breakpoints by file name and line number may fail. Show Symbols Показать символы + + Show Dependencies + Показать зависимости + Load Symbols for Module "%1" - Загрузить символы для модуля "%1" + Загрузить символы для модуля «%1» Edit File "%1" - Изменить файл "%1" + Изменить файл «%1» Show Symbols in File "%1" - Показать символы в файле "%1" + Показать символы в файле «%1» + + + Show Dependencies of "%1" + Показать зависимости «%1» Adjust Column Widths to Contents Выравнить ширину столбцов по содержимому + + + Debugger::Internal::MultiBreakPointsDialog - Always Adjust Column Widths to Contents - Всегда выравнивать ширину столбцов по содержимому + Edit Breakpoint Properties + Изменить свойства точки останова @@ -5184,7 +6582,7 @@ Setting breakpoints by file name and line number may fail. Unable to start pdb '%1': %2 - Не удалось запустить pdb "%1": %2 + Не удалось запустить pdb «%1»: %2 Adapter start failed @@ -5196,7 +6594,7 @@ Setting breakpoints by file name and line number may fail. '%1' contains no identifier - "%1" не содержит идентификаторов + «%1» не содержит идентификаторов String literal %1 @@ -5204,7 +6602,7 @@ Setting breakpoints by file name and line number may fail. Cowardly refusing to evaluate expression '%1' with potential side effects - Робкий отказ вычислить выражение "%1" с возможными побочными эффектами + Робкий отказ вычислить выражение «%1» с возможными побочными эффектами Pdb I/O Error @@ -5212,7 +6610,7 @@ Setting breakpoints by file name and line number may fail. The Pdb process failed to start. Either the invoked program '%1' is missing, or you may have insufficient permissions to invoke the program. - Процесс Pdb не смог запуститься. Или вызываемая программа "%1" отсутствует, или у вас нет прав на её вызов. + Процесс Pdb не смог запуститься. Или вызываемая программа «%1» отсутствует, или у вас нет прав на её вызов. The Pdb process crashed some time after starting successfully. @@ -5235,6 +6633,91 @@ Setting breakpoints by file name and line number may fail. Неизвестная ошибка возникла у процесса Pdb. + + Debugger::Internal::QmlCppEngine + + The slave debugging engine required for combined QML/C++-Debugging could not be created: %1 + Не удалось создать ведомый отладчик для комбинированной отладки QML/C++: %1 + + + %1 debugger activated + Отладчик %1 активирован + + + + Debugger::Internal::QmlEngine + + QML Debugger connected. + Отладчик QML подключён. + + + Qt Creator + + + + Could not connect to the in-process QML debugger. +Do you want to retry? + Не удалось подключиться к внутрипроцессному отладчику QML. +Повторить? + + + QML Debugger: Remote host closed connection. + Отладчик QML: соединение было закрыто удалённой стороной. + + + QML Debugger: Could not connect to service '%1'. + Отладчик QML: не удалось подключиться к сервису «%1». + + + Could not connect to the in-process QML debugger: +%1 + %1 is detailed error message + Не удалось подключиться к внутрипроцессному отладчику QML. +%1 + + + <p>An uncaught exception occurred:</p><p>%1</p> + <p>Возникло не пойманное исключение:</p><p>%1</p> + + + <p>An uncaught exception occurred in <i>%1</i>:</p><p>%2</p> + <p>Возникло непойманное исключение в <i>%1</i>:</p><p>%2</p> + + + The port seems to be in use. + Error message shown after 'Could not connect ... debugger:" + Похоже, порт уже используется. + + + The application is not set up for QML/JS debugging. + Error message shown after 'Could not connect ... debugger:" + Приложение не настроено для отладки QML/JS. + + + Starting %1 %2 + Запускается %1 %2 + + + Failed to start application + Не удалось запустить приложение + + + Application startup failed: %1 + Запуск приложения не удался: %1 + + + Stopped. + Остановлено. + + + Uncaught Exception + Непойманное исключение + + + QML Debugger disconnected. + Отладчик QML отключён. + + Debugger::Internal::RegisterHandler @@ -5284,16 +6767,12 @@ Setting breakpoints by file name and line number may fail. Adjust Column Widths to Contents Выравнить ширину столбцов по содержимому - - Always Adjust Column Widths to Contents - Всегда выравнивать ширину столбцов по содержимому - Debugger::Internal::RemoteGdbProcess - Connection could not be established. - Невозможно установить подключение. + Connection failure: %1. + Ошибка подключения: %1. Could not create FIFO. @@ -5304,12 +6783,12 @@ Setting breakpoints by file name and line number may fail. Процесс чтения вывода приложения неожиданно завершился. - Remote gdb failed to start. - Не удалось запустить внешний gdb. + Remote GDB failed to start. + Не удалось запустить удалённый GDB. - Remote gdb crashed. - Внешний gdb завершился крахом. + Remote GDB crashed. + Удалённый GDB завершился крахом. @@ -5382,7 +6861,7 @@ Setting breakpoints by file name and line number may fail. '%1' contains no identifier - '%1' не содержит идентификаторов + «%1» не содержит идентификаторов String literal %1 @@ -5390,7 +6869,7 @@ Setting breakpoints by file name and line number may fail. Cowardly refusing to evaluate expression '%1' with potential side effects - Робкий отказ вычислить выражение '%1' с возможными побочными эффектами + Робкий отказ вычислить выражение «%1» с возможными побочными эффектами Stopped at %1:%2. @@ -5430,10 +6909,6 @@ Setting breakpoints by file name and line number may fail. Adjust Column Widths to Contents Выравнить ширину столбцов по содержимому - - Always Adjust Column Widths to Contents - Всегда выравнивать ширину столбцов по содержимому - Debugger::Internal::SourceFilesHandler @@ -5462,35 +6937,11 @@ Setting breakpoints by file name and line number may fail. Open File "%1"' - Открыть файл "%1"' + Открыть файл «%1» Debugger::Internal::StackHandler - - Address: - Адрес: - - - Function: - Функция: - - - File: - Файл: - - - Line: - Строка: - - - From: - Из: - - - To: - В: - ... ... @@ -5547,12 +6998,12 @@ Setting breakpoints by file name and line number may fail. Открыть дизассемблер - Adjust Column Widths to Contents - Выравнить ширину столбцов по содержимому + Try to Load Unknown Symbols + Попытаться загрузить неизвестные символы - Always Adjust Column Widths to Contents - Всегда выравнивать ширину столбцов по содержимому + Adjust Column Widths to Contents + Выравнить ширину столбцов по содержимому @@ -5565,13 +7016,20 @@ Setting breakpoints by file name and line number may fail. Select Working Directory Выбор рабочего каталога + + + Debugger::Internal::StartRemoteCdbDialog - Executable: - Программа: + <html><body><p>The remote CDB needs to load the matching Qt Creator CDB extension (<code>%1</code> or <code>%2</code>, respectively).</p><p>Copy it onto the remote machine and set the environment variable <code>%3</code> to point to its folder.</p><p>Launch the remote CDB as <code>%4 &lt;executable&gt;</code> to use TCP/IP as communication protocol.</p><p>Enter the connection parameters as:</p><pre>%5</pre></body></html> + <html><body><p>Удалённый CDB должен загрузить подходящее Qt Creator расширение (<code>%1</code> или <code>%2</code>, соответственно).</p><p>Скопируйте его на удалённую машину и задайте переменной среды <code>%3</code> путь к каталогу с расширением.</p><p>Запустите удалённых CDB так: <code>%4 &lt;программа&gt;</code> при использовании протокола TCP/IP.</p><p>Введите следующие параметры соединения:</p><pre>%5</pre></body></html> - Arguments: - Параметры: + Start a CDB Remote Session + Запуск удалённой сессии CDB + + + &Connection: + &Подключение: @@ -5593,38 +7051,6 @@ Setting breakpoints by file name and line number may fail. Выбор скрипта запуска - - Debugger::Internal::TcfEngine - - %1. - %1. - - - Running requested... - Потребован запуск... - - - Stopped. - Остановлено. - - - - Debugger::Internal::TcfTrkGdbAdapter - - Process started, PID: 0x%1, thread id: 0x%2, code segment: 0x%3, data segment: 0x%4. - Процесс запущен, PID: 0x%1, ID потока: 0x%2, сегмент кода: 0x%3, сегмент данных: 0x%4. - - - The reported code segment address (0x%1) might be invalid. Symbol resolution or setting breakoints may not work. - Сообщённый адрес сегмента кода (0x%1) может быть неверным. Разрешение имён и установка точек останова может не работать. - - - Connecting to TRK server adapter failed: - - Не удалось подключиться к адаптеру TRK сервера: - - - Debugger::Internal::TermGdbAdapter @@ -5644,7 +7070,7 @@ Setting breakpoints by file name and line number may fail. Name: - Имя: + Название: State: @@ -5652,7 +7078,7 @@ Setting breakpoints by file name and line number may fail. Core: - Дамп: + Ядро: Stopped&nbsp;at: @@ -5701,25 +7127,6 @@ Setting breakpoints by file name and line number may fail. Adjust Column Widths to Contents Выравнить ширину столбцов по содержимому - - Always Adjust Column Widths to Contents - Всегда выравнивать ширину столбцов по содержимому - - - - Debugger::Internal::ToolChainSelectorWidget - - Desktop/General - Настольный/Стандартный - - - Symbian - - - - Maemo - - Debugger::Internal::TrkGdbAdapter @@ -5729,7 +7136,7 @@ Setting breakpoints by file name and line number may fail. Unable to acquire a device on '%1'. It appears to be in use. - Не удалось получить доступ к устройству через "%1". Возможно, оно уже используется. + Не удалось получить доступ к устройству через «%1». Возможно, оно уже используется. Process started, PID: 0x%1, thread id: 0x%2, code segment: 0x%3, data segment: 0x%4. @@ -5766,8 +7173,12 @@ Setting breakpoints by file name and line number may fail. Выражение - Type - Тип + Internal Type + Внутренний тип + + + Displayed Type + Отображаемый тип ... <cut off> @@ -5813,6 +7224,14 @@ Setting breakpoints by file name and line number may fail. <not accessible> <недоступно> + + <more than %n items> + + <более, чем %n элемент> + <более, чем %n элемента> + <более, чем %n элементов> + + <%n items> @@ -5829,10 +7248,6 @@ Setting breakpoints by file name and line number may fail. %1 Object at Unknown Address Объект типа %1 по неизвестному адресу - - Locals & Watchers - Переменные - Root Корень @@ -5916,24 +7331,20 @@ Setting breakpoints by file name and line number may fail. Переменные - Change Format for Type - Сменить формат типа - - - Change Format for Type "%1" - Сменить формат типа "%1" + Change Display for Type "%1": + Сменить отображение для типа «%1»: Automatic Автоматический - Change Format for Object Named "%1" - Сменить формат объекта с именем "%1" + Change Display for Object Named "%1": + Сменить отображение объекта с именем «%1»: - Change Format for Object - Сменить формат объекта + Change Display for Type or Item... + Сменить отображение для типа или элемента... Insert New Watch Item @@ -5953,19 +7364,27 @@ Setting breakpoints by file name and line number may fail. Open Memory Editor at Referenced Address (0x%1) - Открыть редактор памяти по адресу указателя (0x%1) + Открыть редактор памяти по косвенному адресу (0x%1) - Break on Changes at Object's Address (0x%1) - Останов при изменении по адресу объекта (0x%1) + Add Watchpoint + Добавить контрольную точку - Break on Changes at Referenced Address (0x%1) - Останов при изменении по адресу указателя (0x%1) + Close Editor Tooltips + Закрыть подсказки редактора - Break on Changing Contents - Останов при изменении содержимого + Enter watch expression + Ввод наблюдаемого выражения + + + Expression: + Выражение: + + + Locals & Watchers + Переменные Watch Expression @@ -5973,7 +7392,7 @@ Setting breakpoints by file name and line number may fail. Watch Expression "%1" - Наблюдать выражение "%1" + Наблюдать выражение «%1» Remove Watch Expression @@ -5981,7 +7400,43 @@ Setting breakpoints by file name and line number may fail. Remove Watch Expression "%1" - Удалить наблюдаемое выражение "%1" + Удалить наблюдаемое выражение «%1» + + + Change Display Format... + Сменить формат отображения... + + + Treat All Characters as Printable + Считать все символы печатными + + + Show Unprintable Characters as Octal + Отображать непечатные символы в восьмеричной системе + + + Show Unprintable Characters as Hexadecimal + Отображать непечатные символы в шестнадцатеричной системе + + + Use Display Format Based on Type + Использовать формат отображения основанный на типе + + + Remove All Watch Items + Удалить все наблюдаемые элементы + + + Open Memory Editor at Object's Address + Открыть редактор памяти по адресу объекта + + + Open Memory Editor at Referenced Address + Открыть редактор памяти по косвенному адресу + + + Copy Contents to Clipboard + Скопировать содержимое в буфер обмена Refresh Code Model Snapshot @@ -5996,8 +7451,16 @@ Setting breakpoints by file name and line number may fail. Выравнить ширину столбцов по содержимому - Always Adjust Column Widths to Contents - Всегда выравнивать ширину столбцов по содержимому + Add Watchpoint at Object's Address (0x%1) + Добавить контрольную точку на адрес объекта (0x%1) + + + Add Watchpoint at Referenced Address (0x%1) + Добавить контрольную точку по косвенному адресу (0x%1) + + + Setting a watchpoint on an address will cause the program to stop when the data at the address it modified. + Установка контрольной точки на адрес приведёт к остановке программы при изменении данных по этому адресу. @@ -6038,78 +7501,38 @@ Setting breakpoints by file name and line number may fail. закрытие... - Error: Cannot connect to debug service '%1'. Debugging functionality will be limited. - Ошибка: Невозможно подключиться к сервису отладки "%1". Возможности отладки будут ограничены. + Debug service '%1' became unavailable. + Сервис отладки «%1» похоже недоступен. Connected to debug service '%1'. - Подключено к сервису отладки "%1". + Подключено к сервису отладки «%1». Not connected to debug service '%1'. - Не подключено к сервису отладки "%1". + Не подключено к сервису отладки «%1». - Debugger::QmlCppEngine + DebuggerEngine - %1 debugger activated - Отладчик %1 активирован + Debugging complex command lines is currently not supported under Windows + Отладка сложных командных строк под Windows пока не поддерживаеться - Debugger::QmlEngine + DebuggerRunControl - QML Debugger connected. - Отладчик QML подключён. + Debug + Отладка - Failed to connect to debugger - Не удалось подключиться к отладчику + Debugger + Отладчик - Could not connect to QML debugger server at %1:%2. - Не удалось подключиться к серверу отладчика QML (%1:%2). - - - QML Debugger: Remote host closed connection. - Отладчик QML: соединение было закрыто удалённой стороной. - - - QML Debugger: Could not connect to service '%1'. - Отладчик QML: не удалось подключиться к сервису "%1". - - - QML Debugger connecting... - Отладчик QML подключается... - - - Failed to start application - Не удалось запустить приложение - - - Application startup failed: %1 - Запуск приложения не удался: %1 - - - Trying to stop while process is no longer running. - Попытка остановить, когда процесс уже не работает. - - - Stopped. - Остановлено. - - - <p>An Uncaught Exception occured in <i>%1</i>:</p><p>%2</p> - <p>Возникло непойманное исключение в <i>%1</i>:</p><p>%2</p> - - - Uncaught Exception - Непойманное исключение - - - QML Debugger disconnected. - Отладчик QML отключён. + Unable to create a debugger engine of the type '%1' + Не удалось создать отладчик типа «%1» @@ -6122,10 +7545,6 @@ Setting breakpoints by file name and line number may fail. Location: Размещение: - - Debug debugging helper - Отладить помощника отладчика - Makes use of Qt Creator's code model to find out if a variable has already been assigned a value at the point the debugger interrupts. Включить использование модели кода Qt Creator для определения @@ -6135,18 +7554,24 @@ Setting breakpoints by file name and line number may fail. Use code model Использовать модель кода - - <html><head/><body> -<p>The debugging helper is only used to produce a nice display of objects of certain types like QString or std::map in the &quot;Locals and Watchers&quot; view.</p> -<p> It is not strictly necessary for debugging with Qt Creator. </p></body></html> - <html><head/><body> -<p>Помощник отладчика используется только для корректного отображения объектов некоторых типов, вроде QString и std::map в обзоре &quot;Переменные&quot; режима отладки.</p> -<p>Он не является необходимым для отладки с помощью Qt Creator.</p></body></html> - Use Debugging Helper Использовать помощник отладчика + + Displays names of QThread based threads. + Отображать названия потоков основанных на QThread. + + + Display thread names + Отображать названия потоков + + + <html><head/><body> +<p>The debugging helper is only used to produce a nice display of objects of certain types like QString or std::map in the &quot;Locals and Watchers&quot; view. It is not strictly necessary for debugging with Qt Creator. </p></body></html> + <html><head/><body> +<p>Помощник отладчика используется только для корректного отображения объектов некоторых типов, вроде QString и std::map в обзоре «Переменные» режима отладки. Он не является необходимым для отладки с помощью Qt Creator.</p></body></html> + DependenciesModel @@ -6202,13 +7627,13 @@ Setting breakpoints by file name and line number may fail. The generated header of the form '%1' could not be found. Rebuilding the project might help. - Не удалось найти сгенерированный заголовочный файл для формы "%1". + Не удалось найти сгенерированный заголовочный файл для формы «%1». Пересборка проекта может помочь. The generated header '%1' could not be found in the code model. Rebuilding the project might help. - Не удалось найти сгенерированный заголовочный файл "%1" в модели кода. + Не удалось найти сгенерированный заголовочный файл «%1» в модели кода. Пересборка проекта может помочь. @@ -6302,12 +7727,12 @@ Rebuilding the project might help. Форма Qt Designer - Creates a Qt Designer form along with a matching class (C++ header and source file) for implementation purposes. You can add the form and class to an existing Qt C++ Project. - Создание формы дизайнера Qt и соответствующего класса (исходный и заголовочный файлы C++) для реализации. Их можно будет добавить к существующему проекту Qt C++. + Creates a Qt Designer form that you can add to a Qt Widget Project. This is useful if you already have an existing class for the UI business logic. + Создание формы дизайнера Qt для добавления к существующему проекту Qt Widget. Это полезно в случае, если уже имеется класс бизнес-логики интерфеса пользователя. - Creates a Qt Designer form that you can add to a Qt C++ project. This is useful if you already have an existing class for the UI business logic. - Создание формы дизайнера Qt для добавления к существующему проекту Qt C++. Это полезно в случае, если уже имеется класс бизнес-логики интерфеса пользователя. + Creates a Qt Designer form along with a matching class (C++ header and source file) for implementation purposes. You can add the form and class to an existing Qt Widget Project. + Создание формы дизайнера Qt и соответствующего класса (исходный и заголовочный файлы C++) для реализации. Их можно будет добавить к существующему проекту Qt Widget. Qt Designer Form Class @@ -6477,7 +7902,7 @@ Rebuilding the project might help. Designer::Internal::QtCreatorIntegration The class definition of '%1' could not be found in %2. - Не удалось найти в %2 определение класса '%1'. + Не удалось найти в %2 определение класса «%1». Error finding/adding a slot. @@ -6490,7 +7915,7 @@ Rebuilding the project might help. No documents matching '%1' could be found. Rebuilding the project might help. - Не удалось найти документы соответствующие '%1'. + Не удалось найти документы соответствующие «%1». Возможно, пересборка проекта поможет. @@ -6504,10 +7929,6 @@ Rebuilding the project might help. Registered Documentation Зарегистрированная документация - - Add... - Добавить... - Remove Удалить @@ -6516,6 +7937,10 @@ Rebuilding the project might help. Add and remove compressed help files, .qch. Добавление и удаление сжатых файлов справки, .qch. + + Add + Добавить + EasingContextPane @@ -6553,7 +7978,7 @@ Rebuilding the project might help. Overshoot - Отклонение + Превышение Play simulation @@ -6581,7 +8006,7 @@ Rebuilding the project might help. Easing overshoot for a back curve - Отклонение перехода кубической кривой + Перерегулирование перехода кубической кривой @@ -6915,11 +8340,11 @@ Reason: %3 "%1" %2 %3L, %4C written - "%1" %2 %3L, %4C записано + «%1» %2 %3L, %4C записано "%1" %2L, %3C - "%1" %2L, %3C + «%1» %2L, %3C %n lines filtered @@ -6947,7 +8372,7 @@ Reason: %3 Mark '%1' not set - Отметить "%1" не установленным + Отметить «%1» не установленным Unknown option: @@ -6955,15 +8380,15 @@ Reason: %3 File "%1" exists (add ! to override) - Файл "%1" уже существует (добавьте ! для перезаписи) + Файл «%1» уже существует (добавьте ! для перезаписи) Cannot open file "%1" for writing - Не удалось открыть файл "%1" для записи + Не удалось открыть файл «%1» для записи Cannot open file "%1" for reading - Не удалось открыть файл "%1" для чтения + Не удалось открыть файл «%1» для чтения %n lines %1ed %2 time @@ -7356,6 +8781,49 @@ Add, modify, and remove document filters, which determine the documentation set Replace Заменить + + Collapse All + Свернуть всё + + + + FlickableSpecifics + + Flickable + Пролистываемо + + + Content Size + Размер содержимого + + + Flickable Direction + Направление пролистывания + + + Bounds Behavior + Поведение границ + + + Interactive + Интерактивность + + + Max. Velocity + Макс. скорость + + + Maximum Flick Velocity + Максимальная скорость полистывания + + + Deceleration + Замедление + + + Flick Deceleration + Замедление пролистывания + FontGroupBox @@ -7376,28 +8844,73 @@ Add, modify, and remove document filters, which determine the documentation set Стиль + + GLSLEditor + + GLSL + + + + + GLSLEditor::GLSLFileWizard + + New %1 + Создание %1 + + + + GLSLEditor::Internal::FunctionArgumentWidget + + %1 of %2 + %1 из %2 + + + + GLSLEditor::Internal::GLSLEditorPlugin + + GLSL + GLSL sub-menu in the Tools menu + + + + Creates a fragment shader in the OpenGL/ES 2.0 Shading Language (GLSL/ES). Fragment shaders generate the final pixel colors for triangles, points and lines rendered with OpenGL. + Создание фрагментного шейдера на языке шейдеров OpenGL/ES 2.0 (GLSL/ES). Фрагментные шейдеры определяют окончательные пиксельные цвета треугольников, точек и линий, отрисовываемых OpenGL. + + + Fragment Shader (OpenGL/ES 2.0) + Фрагментный шейдер (OpenGL/ES 2.0) + + + Creates a vertex shader in the OpenGL/ES 2.0 Shading Language (GLSL/ES). Vertex shaders transform the positions, normals and texture co-ordinates of triangles, points and lines rendered with OpenGL. + Создание вершинного шейдера на языке шейдеров OpenGL/ES 2.0 (GLSL/ES). Вершинные шейдеры изменяют положение, нормали и текстурные координаты треугольников, точек и линий, отрисовываемых OpenGL. + + + Vertex Shader (OpenGL/ES 2.0) + Вершинный шейдер (OpenGL/ES 2.0) + + + Creates a fragment shader in the Desktop OpenGL Shading Language (GLSL). Fragment shaders generate the final pixel colors for triangles, points and lines rendered with OpenGL. + Создание фрагментного шейдера на языке шейдеров OpenGL (GLSL). Фрагментные шейдеры определяют окончательные пиксельные цвета треугольников, точек и линий, отрисовываемых OpenGL. + + + Fragment Shader (Desktop OpenGL) + Фрагментный шейдер (настольный OpenGL) + + + Creates a vertex shader in the Desktop OpenGL Shading Language (GLSL). Vertex shaders transform the positions, normals and texture co-ordinates of triangles, points and lines rendered with OpenGL. + Создание вершинного шейдера на языке шейдеров OpenGL (GLSL). Вершинные шейдеры изменяют положение, нормали и текстурные координаты треугольников, точек и линий, отрисовываемых OpenGL. + + + Vertex Shader (Desktop OpenGL) + Вершинный шейдер (настольный OpenGL) + + GdbOptionsPage - - Environment: - Переменные среды окружения: - - - This is either empty or points to a file containing gdb commands that will be executed immediately after gdb starts up. - Указывает на файл, который содержит команды gdb, которые выполняются сразу после запуска. Поле может быть пустым. - - - Gdb startup script: - Сценарий запуска gdb: - This is the slowest but safest option. Это самый медленный, но и самый надеждый вариант. - - Try to set breakpoints in plugins always automatically. - Всегда автоматически ставить точки останова в модулях. - Try to set breakpoints in selected plugins Ставить точки останова в выбранных модулях @@ -7410,37 +8923,10 @@ Add, modify, and remove document filters, which determine the documentation set Never set breakpoints in plugins automatically Никогда не ставить точки останова автоматически - - Gdb timeout: - Время ожидания ответа gdb: - - - This is the number of seconds Qt Creator will wait before -it terminates non-responsive gdb process. The default value of 20 seconds -should be sufficient for most applications, but there are situations when -loading big libraries or listing source files takes much longer than that -on slow machines. In this case, the value should be increased. - Столько секунд будет ждать Qt Creator перед тем, как завершит -неотвечающий процесс gdb. 20 секунд, которые установлены по -умолчанию, должно быть достаточно в большинстве случаев, но -бывают ситуации, когда загрузка больших библиотек или просмотр -исходных файлов могут занять гораздо больше времени, особенно на -медленных машинах. В этом случае это число должно быть увеличено. - - - Gdb - - Enable reverse debugging Включить реверсивную отладку - - When this option is checked, 'Step Into' compresses several steps into one in certain situations, leading to 'less noisy' debugging. So will, e.g., the atomic - reference counting code be skipped, and a single 'Step Into' for a signal emission will end up directly in the slot connected to it. - Когда включён данный параметр, в определенных ситуациях 'Зайти в' объединяет несколько шагов в один, позволяя 'снизить шум' при отладке. -Например, будет пропущен атомарный код подсчета ссылок и единственная операция "Зайти в" инициации сигнала завершится прямо в слоте, который подключён к данному сигналу. - Skip known frames when stepping Пропускать известные этапы при пошаговой отладке @@ -7454,9 +8940,71 @@ on slow machines. In this case, the value should be increased. Поведение точек останова, устанавливаемых в модулях - Adjust Breakpoint Locations + Adjust breakpoint locations Подстраивать размещение точек останова + + Load .gdbinit file on startup + Загружать файл .gdbinit при запуске + + + Use asynchronous mode to control the inferior + Использовать асинхронный режим для работы с программой + + + GDB + + + + This is either empty or points to a file containing GDB commands that will be executed immediately after GDB starts up. + Указывает на файл, который содержит команды GDB, которые выполняются сразу после запуска отладчика. Поле может быть пустым. + + + GDB startup script: + Сценарий запуска GDB: + + + GDB timeout: + Время ожидания ответа GDB: + + + This will show a message box as soon as your application receives a signal like SIGSEGV during debugging. + Включает отображение сообщения при получении приложением во время отладки сигнала, например SIGSEGV. + + + GDB allows setting breakpoints on source lines for which no code was generated. In such situations the breakpoint is shifted to the next source code line for which code was actually generated. This option reflects such temporary change by moving the breakpoint markers in the source code editor. + GDB позволяет устанавливать точки останова на строки исходников, для которых не создаётся код. В этом случае, она передвигается на следующую строку, для которой код создаётся. Это может проявляется в редакторе, как временное перемещение маркера точки останова. + + + This allows or inhibits reading the user's default .gdbinit file on debugger startup. + Разрешает или запрещает при запуске отладчика загрузку пользовательского файла настроек .gdbinit. + + + Enable reverse debugging Selecting this enables reverse debugging. NOTE: This feature is very slow and unstable on the GDB side. It exhibits unpredictable behaviour when going backwards over system calls and is very likely to destroy your debugging session. + Включение обратной отладки. Внимание! Эта функция очень медленна и нестабильна на стороне GDB. Может привести к непредсказуемому поведению при обратном проходе через системный вызов, что скорее всего приведёт к краху отладочной сессии. + + + This is the number of seconds Qt Creator will wait before +it terminates a non-responsive GDB process. The default value of 20 seconds +should be sufficient for most applications, but there are situations when +loading big libraries or listing source files takes much longer than that +on slow machines. In this case, the value should be increased. + Столько секунд будет ждать Qt Creator перед тем, как завершит +неотвечающий процесс gdb. 20 секунд, которые установлены по +умолчанию, должно быть достаточно в большинстве случаев, но +бывают ситуации, когда загрузка больших библиотек или просмотр +исходных файлов могут занять гораздо больше времени, особенно на +медленных машинах. В этом случае это число должно быть увеличено. + + + Allows 'Step Into' to compress several steps into one step for less noisy debugging. For example, the atomic reference + counting code is skipped, and a single 'Step Into' for a signal emission ends up directly in the slot connected to it. + После включения этого параметра, в определенных ситуациях «Зайти в» объединит несколько шагов в один, позволяя «снизить шум» при отладке. Например, будет пропущен атомарный код подсчета ссылок, а после входа в инициацию сигнала окажетесь прямо в слоте, который подключён к нему. + + + Try to set breakpoints in plugins always automatically + Всегда автоматически ставить точки останова в модулях + GeneralSettingsPage @@ -7496,10 +9044,6 @@ on slow machines. In this case, the value should be increased. Use &Blank Page &Пустая страница - - Restore to Default - По умолчанию - Help Bookmarks Закладки справки @@ -7560,6 +9104,14 @@ on slow machines. In this case, the value should be increased. Return to editor on closing the last page Возврат в режим редактирования при закрытии последней страницы + + Reset to default + Восстановить страницу по умолчанию + + + Reset + Сбросить + GenericMakeStep @@ -7613,6 +9165,10 @@ on slow machines. In this case, the value should be increased. Generic Manager Базовое управление + + <Invalid tool chain> + <Неверный инструментарий> + GenericProjectManager::Internal::GenericMakeStep @@ -7632,10 +9188,6 @@ on slow machines. In this case, the value should be increased. Override %1: Заменить %1: - - <b>Make:</b> %1 %2 - <b>Make:</b> %1 %2 - GenericProjectManager::Internal::GenericProjectWizard @@ -7675,7 +9227,7 @@ on slow machines. In this case, the value should be increased. GenericProjectManager::Internal::Manager Failed opening project '%1': Project already open - Не удалось открыть проект "%1": проект уже открыт + Не удалось открыть проект «%1»: проект уже открыт @@ -7720,6 +9272,25 @@ on slow machines. In this case, the value should be increased. Удалить ветку master после клонирования хранилища. + + Git::Internal::BaseGitDiffArgumentsWidget + + Use the patience algorithm for calculating the diff + Использовать устойчивый алгоритм для расчёта различий + + + Patience + Устойчивый + + + Ignore whitespace only changes + Пропускать изменения пробелов + + + Ignore Whitespace + Пропускать пробелы + + Git::Internal::BranchDialog @@ -7748,7 +9319,7 @@ on slow machines. In this case, the value should be increased. Would you like to delete the branch '%1'? - Желаете удалить ветку '%1'? + Желаете удалить ветку «%1»? Failed to delete branch @@ -7768,7 +9339,7 @@ on slow machines. In this case, the value should be increased. Would you like to create a local branch '%1' tracking the remote branch '%2'? - Желаете создать локальную вертку '%1', отслеживающую удалённую ветку '%2'? + Желаете создать локальную вертку «%1», отслеживающую удалённую ветку «%2»? Create branch @@ -7817,6 +9388,25 @@ on slow machines. In this case, the value should be increased. Клонировать хранилище Git + + Git::Internal::GitBlameArgumentsWidget + + Do not show the date a change was made in the output + Не показывать в выводе дату изменений + + + Omit Date + Пропускать дату + + + Ignore whitespace only changes + Пропускать изменения пробелов + + + Ignore Whitespace + Пропускать пробелы + + Git::Internal::GitClient @@ -7849,7 +9439,7 @@ on slow machines. In this case, the value should be increased. Cannot describe '%1'. - Не удалось описать "%1". + Не удалось описать «%1». Git Show %1 @@ -7932,15 +9522,15 @@ on slow machines. In this case, the value should be increased. Unable to run a 'git branch' command in %1: %2 - Не удалось выполнить команду "git branch" в %1: %2 + Не удалось выполнить команду «git branch» в %1: %2 Unable to run 'git show' in %1: %2 - Не удалось выполнить команду "git show" в %1: %2 + Не удалось выполнить команду «git show» в %1: %2 Unable to run 'git clean' in %1: %2 - Не удалось выполнить команду "git clean" в %1: %2 + Не удалось выполнить команду «git clean» в %1: %2 There were warnings while applying %1 to %2: @@ -8019,7 +9609,7 @@ on slow machines. In this case, the value should be increased. Unable to resolve stash message '%1' in %2 Look-up of a stash via its descriptive message failed. - Не удалось найти спрятанное по сообщению "%1" в %2 + Не удалось найти спрятанное по сообщению «%1» в %2 Changes @@ -8079,7 +9669,7 @@ on slow machines. In this case, the value should be increased. The command 'git pull --rebase' failed, aborting rebase. - Не удалось выполнить команду "git pull --rebase", перебазирование прервано. + Не удалось выполнить команду «git pull --rebase», перебазирование прервано. There are no modified files. @@ -8120,7 +9710,7 @@ on slow machines. In this case, the value should be increased. Log of "%1" - История "%1" + История «%1» Alt+G,Alt+L @@ -8132,7 +9722,7 @@ on slow machines. In this case, the value should be increased. Blame for "%1" - Аннотация для "%1" (Blame) + Аннотация для «%1» (Blame) Alt+G,Alt+B @@ -8148,7 +9738,7 @@ on slow machines. In this case, the value should be increased. Diff of "%1" - Изменения "%1" + Изменения «%1» Log Current File @@ -8156,7 +9746,7 @@ on slow machines. In this case, the value should be increased. Stage "%1" for Commit - Подготовить "%1" к фиксации (stage) + Подготовить «%1» к фиксации (stage) Alt+G,Alt+A @@ -8168,7 +9758,7 @@ on slow machines. In this case, the value should be increased. Unstage "%1" from Commit - Не фиксировать "%1" (unstage) + Не фиксировать «%1» (unstage) Diff Current Project @@ -8176,7 +9766,7 @@ on slow machines. In this case, the value should be increased. Diff Project "%1" - Сравнить проект "%1" + Сравнить проект «%1» Undo Uncommited Changes... @@ -8202,7 +9792,7 @@ on slow machines. In this case, the value should be increased. Log Project "%1" - История проекта "%1" + История проекта «%1» Alt+G,Alt+K @@ -8250,7 +9840,7 @@ on slow machines. In this case, the value should be increased. Undo Unstaged Changes for "%1" - Отменить неподготовленные к фиксации изменения "%1" + Отменить неподготовленные к фиксации изменения «%1» Undo Uncommitted Changes @@ -8258,7 +9848,7 @@ on slow machines. In this case, the value should be increased. Undo Uncommitted Changes for "%1" - Отменить незафиксированные изменения "%1" + Отменить незафиксированные изменения «%1» Clean Project... @@ -8266,11 +9856,11 @@ on slow machines. In this case, the value should be increased. Clean Project "%1"... - Очистить проект "%1"... + Очистить проект «%1»... Apply "%1" - Наложить "%1" + Наложить «%1» Create Repository... @@ -8294,7 +9884,7 @@ on slow machines. In this case, the value should be increased. Restores changes saved to the stash list using "Stash". - Восстанавить изменения сохранённые в список спрятанного командой "Спрятать". + Восстанавить изменения сохранённые в список спрятанного командой «Спрятать». Commit... @@ -8332,6 +9922,10 @@ on slow machines. In this case, the value should be increased. Closing Git Editor Закрытие редактора Git + + Git will not accept this commit. Do you want to continue to edit it? + Git не примет эту фиксацию. Желаете продолжить её редактирование? + Repository Clean Очистка хранилища @@ -8380,10 +9974,6 @@ on slow machines. In this case, the value should be increased. Do you want to commit the change? Желаете зафиксировать изменение? - - The commit message check failed. Do you want to commit the change? - Сообщение о фиксации содержит ошибки. Желаете продолжить фиксацию? - Unable to retrieve file list Не удалось получить список файлов @@ -8405,7 +9995,42 @@ on slow machines. In this case, the value should be increased. Git::Internal::GitSettings The binary '%1' could not be located in the path '%2' - Программа '%1' отсутствует в '%2' + Программа «%1» отсутствует в «%2» + + + + Git::Internal::GitShowArgumentsWidget + + Select the pretty printing format + Выбор удобного формата печати + + + oneline + однострочный + + + short + краткий + + + medium + средний + + + full + полный + + + fuller + полнейший + + + email + + + + raw + исходный @@ -8501,10 +10126,6 @@ Perl через переменные среды окружения.Prompt on submit Спрашивать при фиксации - - Use "patience diff" algorithm - Использовать алгоритм "устойчивого" сравнения - Pull with rebase Принимать (pull) с перебазированием @@ -8527,15 +10148,7 @@ Perl через переменные среды окружения. Set "HOME" environment variable - Установить переменную среды "HOME" - - - Omit date from blame output - Пропускать дату при выводе аннотации - - - Ignore whitespace changes in blame and diff - Пропускать изменения пробельных символов в аннотации и при сравнении + Установить переменную среды «HOME» @@ -8545,7 +10158,7 @@ Perl через переменные среды окружения. - Присвоить переменной среды HOME значение "%1" + Присвоить переменной среды HOME значение «%1» (%2). Это приведёт к тому, что msysgit будет при запуске извне git bash искать ключи SSH в указанном месте, а не в каталоге установки. @@ -8556,7 +10169,7 @@ instead of its installation directory when run outside git bash. currently set to '%1' - сейчас "%1" + сейчас «%1» @@ -8672,7 +10285,7 @@ You can choose between stashing the changes or discarding them. '%1' failed (exit code %2). -Ошибка "%1" (код завершения %2). +Ошибка «%1» (код завершения %2). @@ -8680,7 +10293,7 @@ You can choose between stashing the changes or discarding them. '%1' completed (exit code %2). -"%1" выполнено (код завершения %2). +«%1» выполнено (код завершения %2). @@ -8688,11 +10301,11 @@ You can choose between stashing the changes or discarding them. Gitorious::Internal::Gitorious Error parsing reply from '%1': %2 - Ошибка разбора ответа от '%1': %2 + Ошибка разбора ответа от «%1»: %2 Request failed for '%1': %2 - Запрос для '%1' не удался: %2 + Запрос для «%1» не удался: %2 Open source projects that use Git. @@ -8775,7 +10388,7 @@ You can choose between stashing the changes or discarding them. Choose a project from '%1' - Выберите проект из '%1' + Выберите проект из «%1» @@ -8802,7 +10415,7 @@ You can choose between stashing the changes or discarding them. Choose a repository of the project '%1'. - Выберите хранилище проекта "%1". + Выберите хранилище проекта «%1». Mainline Repositories @@ -8825,256 +10438,6 @@ You can choose between stashing the changes or discarding them. Частные хранилища - - GradientDialog - - Edit Gradient - Изменить градиент - - - - GradientEditor - - Start X - X начала - - - Start Y - Y начала - - - Final X - X конца - - - Final Y - Y конца - - - Central X - X центра - - - Central Y - Y центра - - - Focal X - X фокуса - - - Focal Y - Y фокуса - - - Radius - Радиус - - - Angle - Угол - - - Linear - Линейный - - - Radial - Радиальный - - - Conical - Конический - - - Pad - Равномерная - - - Repeat - Цикличная - - - Reflect - Зеркальная - - - Form - Форма - - - Gradient Editor - Редактор градиента - - - This area shows a preview of the gradient being edited. It also allows you to edit parameters specific to the gradient's type such as start and final point, radius, etc. by drag & drop. - Эта область отображает предварительный вариант настраиваемого градиента. Также она позволяет менять с помощью перетаскивания характерные для градиента параметры, такие как: начальная и конечная точки, радиус и пр. - - - 1 - 1 - - - 2 - 2 - - - 3 - 3 - - - 4 - 4 - - - 5 - 5 - - - Gradient Stops Editor - Редактор опорных точек градиента - - - This area allows you to edit gradient stops. Double click on the existing stop handle to duplicate it. Double click outside of the existing stop handles to create a new stop. Drag & drop the handle to reposition it. Use right mouse button to popup context menu with extra actions. - Эта область позволяет редактировать опорные точки градиента. Двойной щелчок на существующей точке создаст её копию. Двойной клик вне существующей точки создаст новую. Точки можно перемещать путем удерживания левой кнопки. По правой кнопке можно получить контекстное меню дополнительных действий. - - - Zoom - Масштаб - - - Reset Zoom - 100% - - - Position - Положение - - - Hue - Оттенок - - - H - H - - - Saturation - Насыщенность - - - S - S - - - Sat - Насыщение - - - Value - Значение - - - V - V - - - Val - Значение - - - Alpha - Альфа - - - A - A - - - Type - Тип - - - Spread - Заливка - - - Color - Цвет - - - Current stop's color - Цвет текущей точки - - - Show HSV specification - Настройки в виде HSV - - - HSV - HSV - - - Show RGB specification - Настройки в виде RGB - - - RGB - RGB - - - Current stop's position - Положение текущей точки - - - % - % - - - Zoom In - Увеличить - - - Zoom Out - Уменьшить - - - Toggle details extension - Показать/скрыть детальные настройки - - - > - > - - - Linear Type - Линейный тип - - - ... - ... - - - Radial Type - Радиальный тип - - - Conical Type - Конический тип - - - Pad Spread - Равномерная заливка - - - Repeat Spread - Цикличная заливка - - - Reflect Spread - Зеркальная заливка - - Help @@ -9127,15 +10490,15 @@ You can choose between stashing the changes or discarding them. The filter "%1" will show every documentation file available, as no attributes are specified. - Фильтр "%1" позволит отображаться каждому доступному файлу документации, как-будто атрибуты не заданы. + Фильтр «%1» позволит отображаться каждому доступному файлу документации, как-будто атрибуты не заданы. The filter "%1" will only show documentation files that have the attribute %2 specified. - Фильтр "%1" позволит отображаться только тем файлам документации, у которых задан атрибут %2. + Фильтр «%1» позволит отображаться только тем файлам документации, у которых задан атрибут %2. The filter "%1" will only show documentation files that have the attributes %2 specified. - Фильтр "%1" позволит отображаться только тем файлам документации, у которых заданы атрибуты %2. + Фильтр «%1» позволит отображаться только тем файлам документации, у которых заданы атрибуты %2. No user defined filters available or no filter selected. @@ -9237,42 +10600,14 @@ You can choose between stashing the changes or discarding them. Increase Font Size Увеличить шрифт - - Ctrl++ - - Decrease Font Size Уменьшить шрифт - - Ctrl+- - - Reset Font Size Восстановить размер шрифта - - Ctrl+0 - - - - Alt+Tab - - - - Alt+Shift+Tab - - - - Ctrl+Tab - - - - Ctrl+Shift+Tab - - Activate Search in Help mode Открыть поиск справки @@ -9373,23 +10708,23 @@ You can choose between stashing the changes or discarding them. Ограничить до префикса - + - + Add + Добавить - - - + Remove + Удалить - Double click to edit item. + Double-click to edit item. Двойной щелчок для изменения. Help::Internal::RemoteHelpFilter - Online Documentation - Интернет-документация + Web Search + Поиск в сети @@ -9441,8 +10776,8 @@ You can choose between stashing the changes or discarding them. - <title>Error 404...</title><div align="center"><br><br><h1>The page could not be found</h1><br><h3>'%1'</h3></div> - <title>Ошибка 404...</title><div align="center"><br><br><h1>Страница отсутствует</h1><br><h3>'%1'</h3></div> + <html><head><meta http-equiv="content-type" content="text/html; charset=UTF-8"><title>Error 404...</title></head><body><div align="center"><br><br><h1>The page could not be found</h1><br><h3>'%1'</h3></div></body> + <html><head><meta http-equiv="content-type" content="text/html; charset=UTF-8"><title>Ошибка 404...</title></head><body><div align="center"><br><br><h1>Не удалось найти страницу</h1><br><h3>«%1»</h3></div></body> @@ -9482,6 +10817,49 @@ You can choose between stashing the changes or discarding them. <p>Определения подсветки предоставляются <a href="http://kate-editor.org/">текстовым редактором Kate</a>.</p></body></html> + + Html5AppWizardSourcesPage + + WizardPage + + + + Main HTML File + Основой HTML файл + + + Generate an index.html file + Создать файл index.html + + + Import an existing .html file + Импортировать существующий файл .html + + + Load a URL + Загрузить по ссылке + + + http:// + + + + Note: Unless you chose to load a URL, all files and directories that reside in the same directory as the main HTML file are deployed. You can modify the contents of the directory any time before deploying. + Если выбрать не загрузку по ссылке, то будут установлены все файлы и каталоги, находящиеся там же, где и основной HTML файл. Можно изменить содержимое каталога в любое время до установки. + + + Touch optimized navigation + Навигация касаниями + + + Enable touch optimized navigation + Включить навигацию, оптимизированную под касания + + + Touch optimized navigation will make the HTML page flickable and enlarge the area of touch sensitive elements. If you use a JavaScript framework which optimizes the touch interaction, leave the checkbox unchecked. + Оптимизация навигации под касания сделает страницу HTML прокручиваемой и увеличит зоны чувствительных элементов. Оставьте опцию отключённой при использовании оптимизированной под касания среды JavaScript. + + ImageSpecifics @@ -9498,11 +10876,11 @@ You can choose between stashing the changes or discarding them. Aliasing - Сглаживание + Ступенчатость Smooth - Использовать + Гладкий Source Size @@ -9548,17 +10926,17 @@ You can choose between stashing the changes or discarding them. - Switch background + Switch Background Включить/отключить фон + + Switch Outline + Включить/отключить обзор + Ctrl+[ - - Switch outline - Включить/отключить обзор - Ctrl+] @@ -9625,6 +11003,30 @@ Ids must begin with a lowercase letter. %2 + + JsFileOptionsPage + + Options + Параметры + + + Stateless library + Библиотека без сохранения состояния + + + Usually each QML component instance has a unique copy of +imported JavaScript libraries. Indicating that a library is +stateless means that a single instance will be shared among +all components. Stateless libraries will not be able to access +QML component instance objects and properties directly. + Обычно, каждый экземпляр элемента QML содержит копии +загруженных библиотек JavaScript. Если указано, что +библиотека без сохранения состояния, то её единственный +экземпляр будет использоваться всеми элементами. Библиотеки +без состояния не имеют прямого доступа к объектам и свойствам +QML. + + Layout @@ -9652,6 +11054,17 @@ Ids must begin with a lowercase letter. Отступ + + LldbOptionsPageWidget + + Enable LLDB + Включить LLDB + + + Use GDB Python dumpers + Использовать дамперы GDB на питоне + + Locator @@ -9733,14 +11146,6 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Limit to prefix Ограничить до префикса - - Add... - Добавить... - - - Edit... - Изменить... - Remove Удалить @@ -9753,6 +11158,14 @@ To do this, you type this shortcut and a space in the Locator entry field, and t File types: Типы файлов: + + Add + Добавить + + + Edit + Изменить + Locator::Internal::FileSystemFilter @@ -9866,6 +11279,125 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Период обновления: + + Macros::Internal::MacroLocatorFilter + + Macros + Сценарии + + + + Macros::Internal::MacroOptionsWidget + + Form + + + + Preferences + Настройки + + + Name + Имя + + + Description + Описание + + + Macro + Макрос + + + Description: + Описание: + + + Shortcut + Сочетание клавиш + + + Remove + Удалить + + + + Macros::Internal::MacrosPlugin + + &Macros + С&ценарии + + + Record Macro + Записать сценарий + + + Ctrl+( + + + + Alt+( + + + + Stop Recording Macro + Остановить запись сценария + + + Play Last Macro + Воспроизвести последний сценарий + + + Save Last Macro + Сохранить последний сценарий + + + Ctrl+) + + + + Alt+) + + + + Alt+R + + + + + Macros::Internal::SaveDialog + + Name: + Название: + + + Description: + Описание: + + + Save Macro + Сохранить сценарий + + + + Macros::MacroManager + + Playing Macro + Воспроизведение сценария + + + An error occured while replaying the macro, execution stopped. + Возникла ошибка при воспроизведении сценария, оно остановлено. + + + Macro mode. Type "%1" to stop recording and "%2" to play it + Режим сценария. Нажмите «%1» для остановки записи и «%2» для воспроизведения + + + Stop Recording Macro + Остановить запись сценария + + MaemoConfigTestDialog @@ -9895,12 +11427,297 @@ To do this, you type this shortcut and a space in the Locator entry field, and t <b>Files to install for subproject:</b> <b>Устанавливаемые файлы подпроекта:</b> + + Add Desktop File + Добавить файл .desktop + + + Add Launcher Icon ... + Добавить значок запуска... + + + Edit the project file to add or remove entries. + Изменение файла проекта для добавления/удаления элементов. + + + <a href="irrelevant">Manage device configurations</a> + <a href="irrelevant">Управление конфигурациями устройств</a> + - MaemoDeviceConfig + MaemoDeviceConfigWizardCheckPreviousKeySetupPage - (Invalid device) - (Неверное устройство) + WizardPage + + + + Has a passwordless (key-based) login already been set up for this device? + Настроен ли доступ без пароля (по ключу) для этого устройства? + + + Yes, and the private key is located at + Да, и ключ находится + + + No + Нет + + + + MaemoDeviceConfigWizardKeyCreationPage + + WizardPage + + + + Qt Creator will now generate a new pair of keys. Please enter the directory to save the key files in and then press "Create Keys". + Qt Creator создаст пару новых ключей. Выберите каталог для их сохранения, а затем нажмите «Создать ключи». + + + Directory: + Каталог: + + + Create Keys + Создать ключи + + + + MaemoDeviceConfigWizardKeyDeploymentPage + + WizardPage + + + + Device address: + Адрес устройства: + + + Password: + Пароль: + + + Deploy Key + Установить ключ + + + To deploy the public key to your device, please execute the following steps: +<ul> +<li>Connect the device to your computer (unless you plan to connect via WLAN).</li> +<li>On the device, start the "%%%maddev%%%" application.</li> +<li>In "%%%maddev%%%", configure the device's IP address to the one shown below (or edit the field below to match the address you have configured).</li> +<li>In "%%%maddev%%%", press "Developer Password" and enter it in the field below.</li> +<li>Click "Deploy Key"</li> + + Для установки открытого ключа на устройство необходимо выполнить следующие этапы: +<ul> +<li>Подключить устройство к компьютеру (если не планируется подключение по WLAN).</li> +<li>Запустить на устройстве приложение «%%%maddev%%%».</li> +<li>Задать в «%%%maddev%%%» указанный ниже IP адрес устройства или изменить здесь, чтобы совпадал с уже настроенным.</li> +<li>В «%%%maddev%%%» нажать «Developer Password» и ввести его в поле «Пароль».</li> +<li>Нажать «Установить ключ»</li> + + + + + MaemoDeviceConfigWizardReuseKeysCheckPage + + WizardPage + + + + Do wou want to re-use an existing pair of keys or should a new one be created? + Желаете использовать имеющуюся пару ключей или нужно создать новую? + + + Re-use existing keys + Использовать существующую + + + File containing the public key: + Файл содержащий открытый ключ: + + + File containing the private key: + Файл содержащий закрытый ключ: + + + Create new keys + Создать новую + + + + MaemoDeviceConfigWizardStartPage + + WizardPage + + + + The name to identify this configuration: + Название этой конфигурации: + + + The system running on the device: + Система устройства: + + + Maemo 5 (Fremantle) + + + + Maemo 6 (Harmattan) + + + + Meego + + + + The kind of device: + Тип устройства: + + + Emulator (Qemu) + Эмулятор (Qemu) + + + Hardware Device + Реальное + + + The device's host name or IP address: + Имя узла или IP адрес устройства: + + + + MaemoDeviceConfigurationsSettingsWidget + + Maemo Device Configurations + Конфигурации устройств Maemo + + + &Configuration: + &Конфигурация: + + + Device type: + Тип устройства: + + + Authentication type: + Тип авторизации: + + + Password + Пароль + + + &Key + К&люч + + + &Host name: + &Имя хоста: + + + IP or host name of the device + IP или имя узла устройства + + + &SSH port: + Порт &SSH: + + + Free ports: + Свободные порты: + + + You can enter lists and ranges like this: 1024,1026-1028,1030 + Можно ввести списки и диапазоны, например: 1024,1026-1028,1030 + + + TextLabel + + + + Connection time&out: + &Время ожидания: + + + s + сек + + + &Username: + &Пользователь: + + + &Password: + П&ароль: + + + Show password + Отображать + + + Set as Default + Использовать всегда + + + &Add + &Добавить + + + &Remove + &Удалить + + + &Test + П&роверить + + + &Generate SSH Key ... + Создать кл&юч SSH... + + + &Deploy Public Key ... + &Установить ключ... + + + Remote Processes ... + Внешние процессы... + + + Private key file: + Файл секретного ключа: + + + Click here to check whether this device is properly set up to run Maemo projects. + Щёлкните, чтобы проверить, корректно ли настроено устройство для запуске проектов Maemo. + + + This will enable you to log into the device without a password. + Это позволяет входить на устройство без пароля. + + + Click here to see which processes are running on the device. + Щёлкните, чтобы узнать, какие процессы запущены на устройстве. + + + Set As Default + Использовать всегда + + + &Name: + &Название: + + + OS type: + Операционная система: + + + Click here if you do not have an SSH key yet. + Щёлкните, если у вас ещё нет SSH ключа. @@ -9925,21 +11742,41 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Skip packaging step Пропустить этап сборки пакета - - <b>Version number:</b> - <b>Номер версии:</b> - - - <b>Adapt Debian file:</b> - <b>Приспособить файл Debian:</b> - Edit Изменить - <b>Package Manager icon:</b> - <b>Значок менеджера пакетов:</b> + Size is 48x48 pixels + Размер 48x48 пикселей + + + Adapt Debian file: + Использовать файл Debian: + + + Package name: + Имя пакета: + + + Package version: + Версия пакета: + + + Short package description: + Краткое описание пакета: + + + Name to be displayed in Package Manager: + Имя, отображаемое менеджером пакетов: + + + Icon to be displayed in Package Manager: + Значок, отображаемый менеджером пакетов: + + + Edit spec file + Изменить файл .spec @@ -9949,124 +11786,133 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Установка Maemo - The project files listed below do not contain Maemo deployment information, which means the respective targets cannot be deployed to and/or run on a device. Qt Creator can add the missing information to these files. - Перечисленные ниже файлы проектов не содержат информации для установки на Maemo, поэтому соответствующие цели нельзя будет установить и/или запустить на устройстве. Qt Creator может добавить отсутствующую информацию в эти файлы. + &Check all + &Включить всё - Check all - Включить всё + &Uncheck All + О&тключить всё - Uncheck All - Отключить всё + The project files listed below do not contain Maemo deployment information, which means the respective targets cannot be deployed to and/or run on a device. Qt Creator will add the missing information to these files if you check the respective rows below. + Перечисленные ниже файлы проектов не содержат информации для установки на Maemo, поэтому соответствующие цели нельзя будет установить и/или запустить на устройстве. Qt Creator может добавить отсутствующую информацию в эти файлы, если включите нужные строки. - MaemoSettingsWidget + MaemoPublishingFileSelectionDialog - Maemo Device Configurations - Настройки устройства Maemo + Choose Package Contents + Выбор содержимого пакета - Device type: - Тип устройства: + <b>Please select the files you want to be included in the source tarball.</b> + + <b>Выберите файлы, которые должны быть включены в архив исходников.</b> + + + + + MaemoPublishingResultPageFremantleFree + + WizardPage + WizardPage - Authentication type: - Тип авторизации: + Progress + Выполнение + + + + MaemoPublishingUploadSettingsPageFremantleFree + + WizardPage + WizardPage - Password - Пароль + Upload Settings + Параметры отправки - Key - Ключ - - - Password: - Пароль: + Garage account name: + Учётная запись Garage: Private key file: Файл секретного ключа: - Add - Добавить + Server address: + Адрес сервера: - Remove - Удалить + Target directory on server: + Целевой каталог на сервере: - Test - Проверить + <a href="https://garage.maemo.org/account/register.php">Get an account</a> + <a href="https://garage.maemo.org/account/register.php">Регистрация</a> - Configuration: - Конфигурация: + <a href="https://garage.maemo.org/extras-assistant/index.php">Request upload rights</a> + <a href="https://garage.maemo.org/extras-assistant/index.php">Запрос прав на выгрузку</a> + + + + MaemoPublishingWizardPageFremantleFree + + WizardPage + WizardPage - Name - Название + Choose build configuration: + Выберите конфигурацию сборки: - IP or host name of the device - IP или имя узла устройства + Only create source package, do not upload + Создавать пакет исходников, но не отправлять + + + MaemoQemuSettingsWidget - Generate SSH Key ... - Создать ключ SSH... - - - s - сек - - - Deploy Public Key ... - Установить ключ... - - - Remote device - Внешнее - - - Maemo emulator - Эмулятор Maemo - - - Host name: - Имя хоста: - - - Connection timeout: - Время ожидания: - - - Username: - Имя пользователя: - - - Show password - Отображать - - - SSH port: - Порт SSH: - - - Free ports: - Свободные порты: - - - You can enter lists and ranges like this: 1024,1026-1028,1030 - Можно ввести списки и диапазоны, например: 1024,1026-1028,1030 - - - TextLabel + Form + + OpenGL Mode + Режим OpenGL + + + &Auto-detect + А&втоматическое определение + + + &Hardware acceleration + &Аппаратное ускорение + + + &Software rendering + &Программная отрисовка + + + + MaemoRemoteProcessesDialog + + List of Remote Processes + Список внешних процессов + + + &Filter by process name: + &Отобрать по имени процесса: + + + &Update List + О&бновить список + + + &Kill Selected Process + &Завершить процесс + MaemoSshConfigDialog @@ -10074,45 +11920,45 @@ To do this, you type this shortcut and a space in the Locator entry field, and t SSH Key Configuration Настройка ключа SSH - - Generate SSH Key - Создать ключ SSH - - - Close - Закрыть - Options Параметры - - Key size: - Размер ключа: - Key algorithm: Алгоритм ключа: - - RSA - - - - DSA - - Key Ключ - Save Public Key... - Сохранить открытый... + Key &size: + &Размер ключа: - Save Private Key... - Сохранить секретный... + &RSA + + + + &DSA + + + + &Generate SSH Key + &Создать ключ SSH + + + Save P&ublic Key... + Сохранить &открытый... + + + Save Pr&ivate Key... + Сохранить с&екретный... + + + &Close + &Закрыть @@ -10153,6 +11999,33 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Обратить выделение + + MemcheckConfigWidget + + Backtrace frame count: + Количество кадров стека: + + + Suppressions: + Игнорировать: + + + Add + Добавить + + + Remove + Удалить + + + Track origins of uninitialized memory + Находить источники неинициализированной памяти + + + Memory Analysis Options + Параметры анализа памяти + + Mercurial::Internal::CloneWizard @@ -10196,18 +12069,6 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Cannot parse output: %1 Не удалось разобрать вывод: %1 - - Hg Annotate %1 - Hg аннотация %1 (annotate) - - - Hg diff %1 - Hg сравнение %1 - - - Hg log %1 - Hg история %1 - Hg incoming %1 Hg входящие %1 @@ -10216,10 +12077,6 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Hg outgoing %1 Hg исходящие %1 - - Working... - Выполнение... - Mercurial::Internal::MercurialCommitPanel @@ -10274,17 +12131,6 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Аннотация родительской ревизии %1 - - Mercurial::Internal::MercurialJobRunner - - Unable to start mercurial process '%1': %2 - Не удалось запустить процесс mercurial "%1": %2 - - - Timed out after %1s waiting for mercurial process to finish. - Вышло время ожидания (%1 сек) завершения процесса mercurial. - - Mercurial::Internal::MercurialPlugin @@ -10297,7 +12143,7 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Annotate "%1" - Аннотация "%1" (annotate) + Аннотация «%1» (annotate) Diff Current File @@ -10305,7 +12151,7 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Diff "%1" - Сравнить "%1" + Сравнить «%1» Alt+H,Alt+D @@ -10317,7 +12163,7 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Log "%1" - История "%1" + История «%1» Alt+H,Alt+L @@ -10329,7 +12175,7 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Status "%1" - Состояние "%1" + Состояние «%1» Alt+H,Alt+S @@ -10341,7 +12187,7 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Add "%1" - Добавить "%1" + Добавить «%1» Delete... @@ -10349,7 +12195,7 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Delete "%1"... - Удалить "%1"... + Удалить «%1»... Revert Current File... @@ -10357,7 +12203,7 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Revert "%1"... - Откатить "%1"... + Откатить «%1»... Diff @@ -10455,13 +12301,9 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Unable to create an editor for the commit. Не удалось создать редактор фиксации. - - Unable to create a commit editor. - Не удалось создать редактор фиксаций. - Commit changes for "%1". - Фиксация изменений "%1". + Фиксация изменений «%1». Do you want to commit the changes? @@ -10627,6 +12469,26 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Qt Designer file Файл Qt Designer + + GLSL Shader file + Файл шейдера GLSL + + + GLSL Fragment Shader file + Файл фрагментного шейдера GLSL + + + GLSL/ES Fragment Shader file + Файл фрагментного шейдера GLSL/ES + + + GLSL Vertex Shader file + Файл вершинного шейдера GLSL + + + GLSL/ES Vertex Shader file + Файл вершинного шейдера GLSL/ES + QML file Файл QML @@ -10753,13 +12615,111 @@ To do this, you type this shortcut and a space in the Locator entry field, and t Qt Creator Generic Assembler - Ассемблер Qt Creator + Стандартный ассемблер Qt Creator Differences between files Разница между файлами + + MimeTypeMagicDialog + + Dialog + + + + Value: + Значение: + + + Type + Тип + + + String + Строка + + + Byte + Байт + + + Use Recommended + Использовать рекомендации + + + Start range: + Начало диапазона: + + + End range: + Конец диапазона: + + + Priority: + Приоритет: + + + <i>Note: Wide range values might impact on Qt Creator's performance when opening files.</i> + <i>Широкий диапазон может снизить скорость Qt Creator при открытии файлов.</i> + + + + MimeTypeSettingsPage + + Form + + + + Details + Подробнее + + + Patterns: + Шаблоны: + + + Magic Header + Заголовок-признак + + + Type + Тип + + + Range + Диапазон + + + Priority + Приоритет + + + Add + Добавить + + + Edit + Изменить + + + Remove + Удалить + + + Reset all to default + Сбросить всё в исходное состояние + + + Reset All + Сбросить всё + + + Registered MIME Types + Зарегистрированные типы MIME + + MobileAppWizard @@ -10776,14 +12736,36 @@ Preselects Qt for Simulator and mobile targets if available. - MobileAppWizardOptionPage + MobileAppWizardGenericOptionsPage WizardPage - WizardPage + - General - Основное + Orientation behavior: + Поведение ориентации: + + + + MobileAppWizardMaemoOptionsPage + + WizardPage + + + + Application icon (64x64): + Значок приложения (64x64): + + + + MobileAppWizardSymbianOptionsPage + + WizardPage + + + + Application icon (.svg): + Значок приложения (.svg): Target UID3: @@ -10793,26 +12775,6 @@ Preselects Qt for Simulator and mobile targets if available. Enable network access Включить доступ по сети - - Orientation behavior: - Поведение ориентации: - - - Symbian Specific - Особенности Symbian - - - Application icon (.svg): - Значок приложения (.svg): - - - Maemo Specific - Особенности Maemo - - - Application icon (64x64): - Значок приложения (64x64): - MobileLibraryWizardOptionPage @@ -10828,6 +12790,10 @@ Preselects Qt for Simulator and mobile targets if available. Target UID3: Целевой UID3: + + Plugin's directory name: + Название каталога модуля: + Modifiers @@ -10851,137 +12817,6 @@ Preselects Qt for Simulator and mobile targets if available. Н/Д - - NameDemanglerPrivate - - Premature end of input - Данные на входе преждевременно закончились - - - Invalid encoding - Некорректная кодировка - - - Invalid name - Некорректное имя - - - Invalid nested-name - Некорректный nested-name - - - Invalid template args - Некорректные аргументы шаблона - - - Invalid template-param - Некорректный template-param - - - Invalid qualifiers: unexpected 'volatile' - Некорректный спецификатор: неожиданный 'volatile' - - - Invalid qualifiers: 'const' appears twice - Некорректный спецификатор: 'const' указан дважды - - - Invalid non-negative number - Некорректное неотрицательное число - - - Invalid template-arg - Некорректный template-arg - - - Invalid expression - Некорректное выражение - - - Invalid primary expression - Некорректное основное выражение - - - Invalid expr-primary - Некорректное expr-primary - - - Invalid type - Некорректный тип - - - Invalid built-in type - Некорректный встроенный тип - - - Invalid builtin-type - Некорректный встроенный тип - - - Invalid function type - Некорректный тип функции - - - Invalid unqualified-name - Некорректный unqualified-name - - - Invalid operator-name '%s' - Некорректное имя оператора '%s' - - - Invalid array-type - Некорректный array-type - - - Invalid pointer-to-member-type - Некорректный тип указателя на член класса - - - Invalid substitution - Некорректная подстановка - - - Invalid substitution: element %1 was requested, but there are only %2 - Некорректная подстановка: необходим элемент %1, но есть только %2 - - - Invalid substitution: There are no elements - Некорректная подстановка: нет элементов - - - Invalid special-name - Некорректный special-name - - - Invalid local-name - Некорректный local-name - - - Invalid discriminator - Некорректный классификатор - - - Invalid ctor-dtor-name - Некорректное имя конструктора/деструктора - - - Invalid call-offset - Некорректный call-offset - - - Invalid v-offset - Некорректный v-offset - - - Invalid digit - Некорректная цифра - - - At position %1: - Со смещением %1: - - NickNameDialog @@ -11035,6 +12870,10 @@ Preselects Qt for Simulator and mobile targets if available. Image Viewer Просмотр изображений + + GLSL Editor + Редактор GLSL + OpenWithDialog @@ -11059,12 +12898,12 @@ Preselects Qt for Simulator and mobile targets if available. Префикс сервера: - <html><head/><body> -<p><a href="http://pastebin.com">pastebin.com</a> allows to send posts to custom subdomains (eg. creator.pastebin.com). Fill in the desired prefix.</p> -<p>Note that the plugin will use this for posting as well as fetching.</p></body></html> - <html><head/><body> -<p><a href="http://pastebin.com">pastebin.com</a> позволяет отправлять данные на пользовательские субдомены (например, creator.pastebin.com). Поэтому укажите желаемый префикс.</p> -<p>Модуль будет использовать его как для отправки, так и для получения.</p></body></html> + <i>Note: The plugin will use this for posting as well as fetching.</i> + <i>Модуль будет использовать префикс, как для отправки, так и для получения.</i> + + + <a href="http://pastebin.com">pastebin.com</a> allows for sending posts to custom subdomains (eg. creator.pastebin.com). Fill in the desired prefix. + <a href="http://pastebin.com">pastebin.com</a> позволяет отправлять данные на пользовательские субдомены (например, creator.pastebin.com). Поэтому укажите желаемый префикс. @@ -11105,19 +12944,19 @@ Preselects Qt for Simulator and mobile targets if available. "%1" timed out after %2ms. - У "%1" вышло время через %2 мс. + У «%1» вышло время через %2 мс. Unable to launch "%1": %2 - Не удалось запустить "%1": %2 + Не удалось запустить «%1»: %2 "%1" crashed. - "%1" завершилась аварийно. + «%1» завершилась аварийно. "%1" terminated with exit code %2: %3 - "%1" завершилась с кодом %2: %3 + «%1» завершилась с кодом %2: %3 The client does not seem to contain any mapped files. @@ -11130,14 +12969,14 @@ Preselects Qt for Simulator and mobile targets if available. The repository "%1" does not exist. - Хранилище "%1" отсутствует. + Хранилище «%1» отсутствует. Perforce::Internal::PerforceEditor Annotate change list "%1" - Аннотация списка изменений "%1" + Аннотация списка изменений «%1» @@ -11152,7 +12991,7 @@ Preselects Qt for Simulator and mobile targets if available. Edit "%1" - Изменить "%1" + Изменить «%1» Alt+P,Alt+E @@ -11168,7 +13007,7 @@ Preselects Qt for Simulator and mobile targets if available. Add "%1" - Добавить "%1" + Добавить «%1» Alt+P,Alt+A @@ -11188,7 +13027,7 @@ Preselects Qt for Simulator and mobile targets if available. Revert "%1" - Откатить "%1" + Откатить «%1» Alt+P,Alt+R @@ -11204,7 +13043,7 @@ Preselects Qt for Simulator and mobile targets if available. Diff "%1" - Сравнить "%1" + Сравнить «%1» Diff Current Project/Session @@ -11212,7 +13051,7 @@ Preselects Qt for Simulator and mobile targets if available. Diff Project "%1" - Сравнить проект "%1" + Сравнить проект «%1» Alt+P,Alt+D @@ -11244,7 +13083,7 @@ Preselects Qt for Simulator and mobile targets if available. Update Project "%1" - Обновить проект "%1" + Обновить проект «%1» Describe... @@ -11256,7 +13095,7 @@ Preselects Qt for Simulator and mobile targets if available. Annotate "%1" - Аннотация "%1" (annotate) + Аннотация «%1» (annotate) Annotate... @@ -11268,7 +13107,7 @@ Preselects Qt for Simulator and mobile targets if available. Filelog "%1" - История "%1" + История «%1» Alt+P,Alt+F @@ -11288,11 +13127,11 @@ Preselects Qt for Simulator and mobile targets if available. Delete "%1"... - Удалить "%1"... + Удалить «%1»... Log Project "%1" - История проекта "%1" + История проекта «%1» Log Project @@ -11300,7 +13139,7 @@ Preselects Qt for Simulator and mobile targets if available. Submit Project "%1" - Фиксировать проект "%1" + Фиксировать проект «%1» Update Current Project @@ -11312,7 +13151,7 @@ Preselects Qt for Simulator and mobile targets if available. Revert Unchanged Files of Project "%1" - Откатить неизменённые файлы проекта "%1" + Откатить неизменённые файлы проекта «%1» Revert Project @@ -11320,7 +13159,7 @@ Preselects Qt for Simulator and mobile targets if available. Revert Project "%1" - Откатить проект "%1" + Откатить проект «%1» Repository Log @@ -11352,7 +13191,7 @@ Preselects Qt for Simulator and mobile targets if available. Do you want to revert all changes to the project "%1"? - Желаете откатить все изменения проекта "%1"? + Желаете откатить все изменения проекта «%1»? Another submit is currently executed. @@ -11393,7 +13232,7 @@ Preselects Qt for Simulator and mobile targets if available. Error running "where" on %1: %2 Failed to run p4 "where" to resolve a Perforce file name to a local file system name. - Ошибка выполнения "where" на %1: %2 + Ошибка выполнения «where» на %1: %2 The file is not mapped @@ -11414,7 +13253,7 @@ Preselects Qt for Simulator and mobile targets if available. Could not start perforce '%1'. Please check your settings in the preferences. - Не удалось запустить Perforce '%1'. Пожалуйста, проверьте настройки. + Не удалось запустить Perforce «%1». Пожалуйста, проверьте настройки. Perforce did not respond within timeout limit (%1 ms). @@ -11599,7 +13438,7 @@ Preselects Qt for Simulator and mobile targets if available. PluginManager The plugin '%1' does not exist. - Модуль "%1" не существует. + Модуль «%1» не существует. Unknown option %1 @@ -11618,19 +13457,19 @@ Preselects Qt for Simulator and mobile targets if available. PluginSpec '%1' misses attribute '%2' - В '%1' пропущен атрибут '%2' + В «%1» пропущен атрибут «%2» '%1' has invalid format - '%1' имеет некорректный формат + «%1» имеет некорректный формат Invalid element '%1' - Некорректный элемент '%1' + Некорректный элемент «%1» Unexpected closing element '%1' - Неожиданный закрывающий элемент '%1' + Неожиданный закрывающий элемент «%1» Unexpected token @@ -11638,7 +13477,7 @@ Preselects Qt for Simulator and mobile targets if available. Expected element '%1' as top level element - Ожидается элемент '%1' в качестве корневого элемента + Ожидается элемент «%1» в качестве корневого элемента Resolving dependencies failed because state != Read @@ -11646,7 +13485,7 @@ Preselects Qt for Simulator and mobile targets if available. Could not resolve dependency '%1(%2)' - Не удалось разрешить зависимость '%1(%2)' + Не удалось разрешить зависимость «%1(%2)» Loading the library failed because state != Resolved @@ -11658,7 +13497,7 @@ Preselects Qt for Simulator and mobile targets if available. Initializing the plugin failed because state != Loaded - Не удалось инициализировать модуль, так как state не равен "Loaded" + Не удалось инициализировать модуль, так как state не равен «Loaded» Internal error: have no plugin instance to initialize @@ -11693,24 +13532,24 @@ Preselects Qt for Simulator and mobile targets if available. Starting: "%1" %2 - Запускается "%1" %2 + Запускается «%1» %2 The process "%1" exited normally. - Процесс "%1" завершился нормально. + Процесс «%1» завершился нормально. The process "%1" exited with code %2. - Процесс "%1" завершился с кодом %2. + Процесс «%1» завершился с кодом %2. The process "%1" crashed. - Процесс "%1" завершился крахом. + Процесс «%1» завершился крахом. Could not start process "%1" %2 - Невозможно запустить процесс "%1" %2 + Невозможно запустить процесс «%1» %2 @@ -11810,7 +13649,7 @@ Preselects Qt for Simulator and mobile targets if available. When executing build step '%1' - Во время выполнения сборки на этапе "%1" + Во время выполнения сборки на этапе «%1» Running build steps for project %1... @@ -11839,18 +13678,24 @@ Preselects Qt for Simulator and mobile targets if available. Error running '%1' in %2: %3 - Ошибка работы "%1" в %2: %3 + Ошибка работы «%1» в %2: %3 - Building helper library '%1' in %2 + Building helper '%1' in %2 - Сборка библиотеки помощника "%1" в %2 + Сборка помощника «%1» в %2 Running %1 %2... Выполнение %1 %2... + + + + Running %1 %2 ... + + Выполнение %1 %2 ... @@ -11890,7 +13735,7 @@ Preselects Qt for Simulator and mobile targets if available. Run %1 - Выполнить %1 + Запустить %1 @@ -11934,6 +13779,10 @@ Preselects Qt for Simulator and mobile targets if available. Object Class-name: Имя класса объекта: + + URI: + + The project name and the object class-name cannot be the same. Название проекта и имя класса объекта не могут совпадать. @@ -12043,31 +13892,6 @@ Reason: %2 Конфигурация установки - - ProjectExplorer::EnvironmentModel - - Variable - Переменная - - - Value - Значение - - - <VALUE> - Value when inserting a new variable - <значение> - - - <VARIABLE> - Name when inserting a new variable - <переменная> - - - <UNSET> - <не задано> - - ProjectExplorer::EnvironmentWidget @@ -12121,45 +13945,6 @@ Reason: %2 Ш&аблон: - - ProjectExplorer::Internal::BuildConfigDialog - - Change build configuration && continue - Сменить конфигурацию сборки и продолжить - - - Cancel - Отмена - - - Continue anyway - Всё равно продолжить - - - Run configuration does not match build configuration - Конфигурация запуска не совпадает с конфигурацией сборки - - - The active build configuration builds a target that cannot be used by the active run configuration. - Цель, создаваемая текущей конфигурацией сборки, не может использоваться текущей конфигурацией запуска. - - - This can happen if the active build configuration uses the wrong Qt version and/or tool chain for the active run configuration (for example, running in Symbian emulator requires building with the WINSCW tool chain). - Это может произойти, если текущая конфигурация сборки использует неверные для текущей конфигурации запуска версию Qt и/или инструментарий (например, для выполнения на эмуляторе Symbian требуется сборка с использованием инструментария WINSCW). - - - Active run configuration - Активная конфигурация запуска - - - Choose build configuration: - Выберите конфигурацию сборки: - - - No valid build configuration found. - Корректная конфигурация сборки не найдена. - - ProjectExplorer::Internal::BuildSettingsWidget @@ -12274,12 +14059,12 @@ Reason: %2 ProjectExplorer::Internal::CopyTaskHandler error: - Task is of type error + Task is of type: error ошибка: warning: - Task is of type warning + Task is of type: warning предупреждение: @@ -12305,10 +14090,6 @@ Reason: %2 Current Project Текущий проект - - File &pattern: - Ш&аблон: - ProjectExplorer::Internal::CustomExecutableConfigurationWidget @@ -12377,15 +14158,12 @@ Reason: %2 ProjectExplorer::Internal::EditorSettingsPropertiesPage - Default file encoding: - Кодировка файла по умолчанию: + Use global settings + Использовать глобальные настройки - - - ProjectExplorer::Internal::EditorSettingsWidget - Default - По умолчанию + Restore Global Values + Восстановить глобальные значения @@ -12396,7 +14174,7 @@ Reason: %2 Open "%1" - Открыть "%1" + Открыть «%1» Open with @@ -12454,7 +14232,7 @@ Reason: %2 '%1' returned the following error: %2 - "%1" вернул следующую ошибку: + «%1» вернул следующую ошибку: %2 @@ -12482,6 +14260,31 @@ Reason: %2 Согласовать с редактором + + ProjectExplorer::Internal::GccToolChainConfigWidget + + &Compiler path: + Путь к &компилятору: + + + &ABI: + + + + + ProjectExplorer::Internal::GccToolChainFactory + + GCC + + + + + ProjectExplorer::Internal::LinuxIccToolChainFactory + + Linux ICC + + + ProjectExplorer::Internal::LocalApplicationRunControl @@ -12497,7 +14300,14 @@ Reason: %2 ProjectExplorer::Internal::LocalApplicationRunControlFactory Run - Выполнить + Запустить + + + + ProjectExplorer::Internal::MingwToolChainFactory + + MinGW + @@ -12554,6 +14364,36 @@ Reason: %2 Запуск: + + ProjectExplorer::Internal::MsvcDebuggerConfigLabel + + <html><body><p>Specify the path to the <a href="%1">Windows Console Debugger executable</a> (%2) here.</p></body></html> + Label text for path configuration. %2 is "x-bit version". + <html><body><p>Укажите здесь путь к <a href="%1">исполняемому файлу Windows Console Debugger</a> (%2).</p></body></html> + + + 64-bit version + 64-х битная версия + + + 32-bit version + 32-х битная версия + + + + ProjectExplorer::Internal::MsvcToolChainConfigWidget + + The CDB debugger could not be found in %1 + Не удалось найти отладчик CDB в %1 + + + + ProjectExplorer::Internal::MsvcToolChainFactory + + MSVC + + + ProjectExplorer::Internal::OutputPane @@ -12598,12 +14438,13 @@ Reason: %2 ProjectExplorer::Internal::ProcessStepConfigWidget - <b>%1</b> %2 %3 %4 - <b>%1</b> %2 %3 %4 + Custom Process Step + Особый - (disabled) - (отключён) + %1 (disabled) + %1 is the custom process step summary + %1 (выключено) @@ -12662,10 +14503,6 @@ Reason: %2 Save all files before build Сохранять все файлы перед сборкой - - Show compiler output on building - Показывать вывод компилятора при сборке - Clear old application output on a new run Очищать старый вывод приложения при новом запуске @@ -12686,6 +14523,22 @@ Reason: %2 Word-wrap application output Переносить вывод приложения + + Ask before terminating the running application in response to clicking the stop button in Application Output. + Спрашивать перед остановкой запущенного приложения при нажатии на кнопку остановки консоли вывода приложения. + + + Always ask before stopping applications + Всегда спрашивать перед остановкой приложений + + + Open compiler output pane when building + Показывать вывод компилятора при сборке + + + Open application output pane when running + Показывать вывод приложения при запуске + ProjectExplorer::Internal::ProjectFileFactory @@ -12694,10 +14547,6 @@ Reason: %2 ProjectExplorer::ProjectFileFactory display name. Фабрика проектных файлов - - Could not open the following project: '%1' - Не удалось открыть указанный проект: "%1" - All Projects Все проекты @@ -12725,22 +14574,22 @@ No project selected Failed to add subproject '%1' to project '%2'. - Не удалось добавить подпроект "%1" -в проект "%2". + Не удалось добавить подпроект «%1» +в проект «%2». Failed to add one or more files to project '%1' (%2). Не удалось добавить один или более файлов в проект -'%1' (%2). +«%1» (%2). A version control system repository could not be created in '%1'. - Не удалось создать хранилище системы контроля версий в "%1". + Не удалось создать хранилище системы контроля версий в «%1». Failed to add '%1' to the version control system. - Не удалось добавить '%1' в контроль версий. + Не удалось добавить «%1» в контроль версий. @@ -12827,7 +14676,26 @@ to project '%2'. Files to be added in - Будут добавлены файлы + Добавляемые файлы + + + + ProjectExplorer::Internal::PublishingWizardSelectionDialog + + Publishing Wizard Selection + Выбор мастера публикации + + + Available Wizards: + Доступные мастера: + + + Start Wizard + Запуск мастера + + + Publishing is currently not possible for project '%1'. + Для проекта «%1» публикация не доступна. @@ -12910,16 +14778,12 @@ to project '%2'. Symbian SDK и исходные файлы проекта должны располагаться на одном диске. - The Symbian SDK was not found for Qt version %1. - Не найден Symbian SDK для профиля Qt %1. + The Symbian tool chain does not handle spaces in the project path '%1'. + Инструментарий Symbian не способен обрабатывать пробелы в пути проекта «%1». - The "Open C/C++ plugin" is not installed in the Symbian SDK or the Symbian SDK path is misconfigured for Qt version %1. - У профиля Qt %1 путь к Symbian SDK неверен или в него не установлен "Open C/C++ plugin". - - - The Symbian toolchain does not handle special characters in a project path well. - Инструментарий Symbian не способен обрабатывать специальные символы в пути проекта. + The Symbian tool chain does not handle special characters in the project name '%1' well. + Инструментарий Symbian не способен корректно обрабатывать специальные символы в имени проекта «%1». @@ -12946,7 +14810,7 @@ to project '%2'. &Switch to - &Открыть + &Активировать New session name @@ -13009,7 +14873,7 @@ to project '%2'. ProjectExplorer::Internal::TargetSelector Run - Выполнить + Запустить Build @@ -13030,7 +14894,7 @@ to project '%2'. Do you really want to remove the "%1" target? Действительно желаете удалить -цель "%1"? +цель «%1»? @@ -13062,6 +14926,40 @@ to project '%2'. Отбор по категориям + + ProjectExplorer::Internal::ToolChainModel + + Auto-detected + Автоопределённая + + + Manual + Особые + + + <nobr><b>ABI:</b> %1 + + + + not up-to-date + не обновлено + + + Name + Имя + + + Type + Тип + + + + ProjectExplorer::Internal::ToolChainOptionsPage + + Tool Chains + Инструментарии + + ProjectExplorer::Internal::VcsAnnotateTaskHandler @@ -13072,12 +14970,8 @@ to project '%2'. ProjectExplorer::Internal::WinGuiProcess - The process could not be started! - Не удалось запустить процесс! - - - Cannot retrieve debugging output! - Не удалось получить отладочный вывод! + The process could not be started: %1 + Не удалось запустить процесс: %1 @@ -13116,10 +15010,6 @@ to project '%2'. ProjectExplorer::ProjectExplorerPlugin - - Projects - Проекты - &Build &Сборка @@ -13170,16 +15060,12 @@ to project '%2'. Close Project "%1" - Закрыть проект "%1" + Закрыть проект «%1» Close All Projects Закрыть все проекты - - Session - Сессии - Build All Собрать всё @@ -13206,7 +15092,7 @@ to project '%2'. Build Project "%1" - Собрать проект "%1" + Собрать проект «%1» Ctrl+B @@ -13218,7 +15104,7 @@ to project '%2'. Rebuild Project "%1" - Пересобрать проект "%1" + Пересобрать проект «%1» Deploy Project @@ -13226,7 +15112,15 @@ to project '%2'. Deploy Project "%1" - Установить проект "%1" + Установить проект «%1» + + + Publish Project... + Опубликовать проект... + + + Publish Project "%1"... + Опубликовать проект «%1»... Clean Project @@ -13234,7 +15128,7 @@ to project '%2'. Clean Project "%1" - Очистить проект "%1" + Очистить проект «%1» Build Without Dependencies @@ -13254,7 +15148,7 @@ to project '%2'. Run - Выполнить + Запустить Ctrl+R @@ -13264,10 +15158,6 @@ to project '%2'. Cancel Build Отменить сборку - - Start Debugging - Начать отладку - Add New... Добавить новый... @@ -13285,10 +15175,23 @@ to project '%2'. Remove project from parent profile (Project explorer view); will not physically delete any files. Убрать проект... + + Full path of the current project's main file, including file name. + Полный путь с именем файла к основному файлу проекта. + + + Full path of the current project's main file, excluding file name. + Полный путь без имени файла к основному файлу проекта. + Do Not Close Не закрывать + + New Subproject + Title of dialog + Создание подпроекта + Adding Files to Project Failed Не удалось добавить файлы в проект @@ -13309,6 +15212,14 @@ to project '%2'. Delete File... Удалить файл... + + Recent Sessions + Последние сессии + + + New Subproject... + Новый подпроект... + Rename Переименовать @@ -13354,14 +15265,6 @@ to project '%2'. Do you want to cancel the build process and close Qt Creator anyway? Желаете все-таки закрыть Qt Creator, прервав процесс сборки? - - Cannot run without a project. - Невозможно запустить без проекта. - - - Cannot debug without a project. - Невозможно запустить отладку без проекта. - New File Title of dialog @@ -13420,6 +15323,13 @@ to version control (%2)? Все файлы (*) + + ProjectExplorer::ProjectsMode + + Projects + Проекты + + ProjectExplorer::QmlDumpTool @@ -13457,12 +15367,8 @@ Reason: %2 Приложение ещё выполняется - %1 is still running. - %1 ещё выполняется. - - - Force it to quit? - Завершить её принудительно? + <html><head/><body><center><i>%1</i> is still running.<center/><center>Force it to quit?</center></body></html> + <html><head/><body><center><i>%1</i> ещё выполняется.<center/><center>Завершить принудительно?</center></body></html> Force Quit @@ -13472,6 +15378,10 @@ Reason: %2 Keep Running Продолжить выполнение + + Do not ask again + Больше не спрашивать + ProjectExplorer::SessionManager @@ -13507,17 +15417,39 @@ Reason: %2 Could not save session to file %1 Не удалось сохранить сессию %1 - - Qt Creator - Qt Creator - Untitled Безымянная + + ProjectExplorer::ToolChain + + Clone of %1 + Клон %1 + + + + ProjectExplorer::ToolChainConfigWidget + + &Debugger: + &Отладчик: + + + Autodetect + Автоопределение + + ProjectExplorer::UserFileAccessor + + Using Old Project Settings File + Используется старый файл настроект проекта + + + <html><head/><body><p>A versioned backup of the .user settings file will be used, because the non-versioned file was created by an incompatible newer version of Qt Creator.</p><p>Project settings changes made since the last time this version of Qt Creator was used with this project are ignored, and changes made now will <b>not</b> be propagated to the newer version.</p></body></html> + <html><head/><body><p>Будет использоваться резервная копия файла настроек (*.user) более старой версии, так как текущий файл создан несовместимой версией Qt Creator.</p><p>Изменения настроек проекта сделанные с момента последнего запуска этой версии Qt Creator не учитываются, а изменения вносимые сейчас <b>не будут</b> сохранены в новую версию файла проекта.</p></body></html> + Project Settings File from a different Environment? Настройки проекта из другой среды? @@ -13583,6 +15515,10 @@ Do you still want to load the settings file? Debug and release Отладка и релиз + + Link QML debugging library: + Подключить библиотеку отладки QML: + QmlDesigner::AllPropertiesBox @@ -13607,11 +15543,11 @@ Do you still want to load the settings file? Cannot save to file "%1": permission denied. - Не удалось сохранить в файл "%1": недостаточно прав. + Не удалось сохранить в файл «%1»: недостаточно прав. Parent folder "%1" for file "%2" does not exist. - Родительский каталог "%1" файла "%2" не существует. + Родительский каталог «%1» файла «%2» не существует. Error @@ -13619,7 +15555,7 @@ Do you still want to load the settings file? Cannot write file: "%1". - Не удалось записать файл: "%1". + Не удалось записать файл: «%1». @@ -13636,6 +15572,10 @@ Do you still want to load the settings file? Only select items with content (S) Выделять только элементы с содержимым (S) + + Reset view (R) + Сбросить вид (R) + QmlDesigner::Internal::BauhausPlugin @@ -13684,7 +15624,7 @@ Do you still want to load the settings file? Delete "%1" - Удалить "%1" + Удалить «%1» Cu&t @@ -13692,7 +15632,7 @@ Do you still want to load the settings file? Cut "%1" - Вырезать "%1" + Вырезать «%1» &Copy @@ -13700,7 +15640,7 @@ Do you still want to load the settings file? Copy "%1" - Копировать "%1" + Копировать «%1» &Paste @@ -13708,7 +15648,7 @@ Do you still want to load the settings file? Paste "%1" - Удалить "%1" + Удалить «%1» Select &All @@ -13716,7 +15656,7 @@ Do you still want to load the settings file? Select All "%1" - Выделить все "%1" + Выделить все «%1» Toggle Full Screen @@ -13779,57 +15719,29 @@ Do you still want to load the settings file? Snapping Привязка - - Item spacing - Межэлементное -расстояние - - - Snap margin - Отступ от края - Qt Quick Designer Дизайнер Qt Quick - - - QmlDesigner::Internal::StatesEditorModel - base state - Implicit default state - исходное состояние + Snap margin: + Отступ от края: - Invalid state name - Неверное название состояния + Item spacing: + Межэлементное расстояние: - The empty string as a name is reserved for the base state. - Пустая строка зарезервирована, как название исходного состояния. + Canvas + Холст - Name already used in another state - Название уже используется другим состоянием - - - - QmlDesigner::Internal::StatesEditorWidgetPrivate - - base state - исходное состояние + Width + Ширина - State%1 - Default name for newly created states - - - - - QmlDesigner::Internal::SubComponentManagerPrivate - - QML Components - Компоненты QML + Height + Высота @@ -13840,7 +15752,7 @@ Do you still want to load the settings file? - QmlDesigner::ItemLibrary + QmlDesigner::ItemLibraryWidget Library Title of library view @@ -13864,6 +15776,10 @@ Do you still want to load the settings file? QmlDesigner::NavigatorTreeModel + + Unknown item: %1 + Неизвестный элемент: %1 + Invalid Id Неверный идентификатор @@ -13872,6 +15788,10 @@ Do you still want to load the settings file? %1 is an invalid id %1 является неверным идентификатором + + %1 already exists + %1 уже существует + Warning Предупреждение @@ -13906,6 +15826,10 @@ Do you still want to load the settings file? %1 is an invalid id %1 является неверным идентификатором + + %1 already exists + %1 уже существует + QmlDesigner::QmlModelView @@ -13926,7 +15850,7 @@ Do you still want to load the settings file? "%1" - "%1" + «%1» line %1 @@ -13937,6 +15861,38 @@ Do you still want to load the settings file? столбец %1 + + QmlDesigner::StatesEditorModel + + base state + Implicit default state + исходное состояние + + + Invalid state name + Неверное название состояния + + + The empty string as a name is reserved for the base state. + Пустая строка зарезервирована, как название исходного состояния. + + + Name already used in another state + Название уже используется другим состоянием + + + + QmlDesigner::StatesEditorView + + State%1 + Default name for newly created states + Состояние%1 + + + base state + исходное состояние + + QmlDesigner::StatesEditorWidget @@ -14027,7 +15983,7 @@ Do you still want to load the settings file? QmlJS::Check '%1' is not a valid property name - "%1" не является корректным именем свойства + «%1» не является корректным именем свойства unknown type @@ -14037,17 +15993,61 @@ Do you still want to load the settings file? unknown value for enum неизвестное значение для enum + + ids must be lower case or start with underscore + id должен быть в нижнем регистре или начинаться с подчёркивания + + + ids must be unique + идентификаторы должны быть уникальными + + + unknown identifier + неизвестный идентификатор + + + could not resolve + не удалось разрешить + + + does not have members + не содержит членов + + + unknown member + неизвестный член + + + == and != perform type coercion, use === or !== instead to avoid + == и != производят преобразование типов, используйте вместо них === или !== + + + blocks do not introduce a new scope, avoid + блоки не вводят новой области видимости, следует убрать + + + use of the with statement is not recommended, use a var instead + не рекомендуется использовать оператор with, вместо него следует использовать var + + + use of void is usually confusing and not recommended + использование void сбивает с толку и не рекомендуется + + + avoid comma expressions + не следует использовать выражения с запятой + + + expression statements should be assignments, calls or delete expressions only + выражениями должны быть только присваивания, вызовы и удаления + '%1' does not have members - "%1" не содержит членов + «%1» не содержит членов '%1' is not a member of '%2' - "%1" не является членом "%2" - - - value might be 'undefined' - значение возможно "undefined" + «%1» не является членом «%2» enum value is not a string or number @@ -14065,6 +16065,14 @@ Do you still want to load the settings file? string value expected требуется строковое значение + + not a valid url + некорректный url + + + file or directory does not exist + файл или каталог не существует + not a valid color некорректный цвет @@ -14073,6 +16081,38 @@ Do you still want to load the settings file? expected anchor line требуется строка привязки + + declarations should be at the start of a function + объявления должны быть в начале функции + + + already a formal parameter + уже формальный параметр + + + already declared as function + уже объявлен, как функция + + + duplicate declaration + повторное объявление + + + variable is used before being declared + переменная используется перед объявлением + + + already declared as var + уже объявлен, как var + + + function is used before being declared + функция используется перед объявлением + + + properties can only be assigned once + свойства могут устанавливаться только раз + expected id требуется id @@ -14082,8 +16122,12 @@ Do you still want to load the settings file? не рекомендуется использовать строковые литералы в качестве id - ids must be lower case - id должен быть в нижнем регистре + avoid assignments in conditions + не используйте присваивание в условиях + + + case does not end with return, break, continue or throw + case не завершён return, break, continue или throw @@ -14098,24 +16142,31 @@ Do you still want to load the settings file? invalid value '%1' for attribute %2 in <%3> - Неверное значение "%1" атрибута %2 в <%3> + Неверное значение «%1» атрибута %2 в <%3> <%1> has no valid %2 attribute У <%1> нет корректного атрибута %2 - - %1: %2 - - QmlJS::Link + + Library contains C++ plugins, type dump is in progress. + Библиотека содержит С++ модуль, производится получение типов. + package not found пакет не найден + + QmlJS::TypeDescriptionReader + + %1: %2 + + + QmlJSEditor::ComponentFromObjectDef @@ -14124,7 +16175,7 @@ Do you still want to load the settings file? Move Component into '%1.qml' - Переместить компоненту в "%1.qml" + Переместить компоненту в «%1.qml» @@ -14149,23 +16200,6 @@ Do you still want to load the settings file? Неверный путь - - QmlJSEditor::Internal::ModelManager - - Indexing - Индексация - - - Type dump of QML plugin in %0 failed. -Errors: -%1 - - Не удалось получить типы от модуля QML в %0. -Ошибки: -%1 - - - QmlJSEditor::Internal::QmlJSEditorFactory @@ -14190,7 +16224,7 @@ Errors: Do you want to enable the experimental Qt Quick Designer? After enabling it, you can access the visual design capabilities by switching to Design Mode. This can affect the overall stability of Qt Creator. To disable Qt Quick Designer again, visit the menu '%1' and disable 'QmlDesigner'. - Желаете включить экспериментальный дизайнер Qt Quick? После его включения доступ к возможностям визуального дизайна можно будет получить переключением в режим дизайна. Это может повлиять на общую стабильность Qt Creator. Чтобы снова выключить дизайнер Qt Quick, необходимо зайти в меню "%1" и выключить "QmlDesigner". + Желаете включить экспериментальный дизайнер Qt Quick? После его включения доступ к возможностям визуального дизайна можно будет получить переключением в режим дизайна. Это может повлиять на общую стабильность Qt Creator. Чтобы снова выключить дизайнер Qt Quick, необходимо зайти в меню «%1» и выключить «QmlDesigner». Cancel @@ -14215,6 +16249,14 @@ Errors: QML File Файл QML + + Creates a JavaScript file. + Создание файлы JavaScript. + + + JS File + Файл JS + Follow Symbol Under Cursor Перейти к символу под курсором @@ -14237,6 +16279,17 @@ Errors: + + QmlJSEditor::Internal::QmlJSOutlineTreeView + + Expand All + Развернуть всё + + + Collapse All + Свернуть всё + + QmlJSEditor::Internal::QmlJSOutlineWidget @@ -14258,30 +16311,10 @@ Errors: - QmlJSEditor::Internal::QmlJSTextEditor + QmlJSEditor::Internal::QmlJSSnippetProvider - Show Qt Quick ToolBar - Показать панель Qt Quick - - - Rename... - Переименовать... - - - New id: - Новый id: - - - Unused variable - Неиспользуемая переменная - - - Refactoring - Рефакторинг - - - Rename id '%1'... - Переименовать id '%1'... + QML + @@ -14311,6 +16344,40 @@ Errors: Закрепить панель Qt Quick + + QmlJSEditor::JsFileWizard + + New %1 + Новый %1 + + + + QmlJSEditor::QmlJSTextEditorWidget + + Show Qt Quick ToolBar + Показать панель Qt Quick + + + Rename... + Переименовать... + + + New id: + Новый id: + + + Unused variable + Неиспользуемая переменная + + + Refactoring + Рефакторинг + + + Rename id '%1'... + Переименовать id «%1»... + + QmlJSEditor::QuickFix @@ -14335,12 +16402,32 @@ Errors: QML Observer Обозреватель QML + + Filter properties + Свойства фильтра + - QmlJSInspector::Internal::QmlInspectorToolbar + QmlJSInspector::Internal::QmlInspectorToolBar + + Apply Changes on Save + Применять изменения при сохранении + + + Show application on top + Показывать приложение поверх всех + + + Observer Mode + Режим наблюдения + + + Play/Pause Animations + Воспроизвести/приостановить анимации + Select - Выделить + Выбрать Zoom @@ -14350,49 +16437,25 @@ Errors: Color Picker Выбор цвета - - Pause - Приостановить - - - Observer Mode - Режим наблюдения - - - Apply Changes on Save - Применять изменения при сохранении - - - Play/Pause Animations - Воспроизвести/приостановить анимации - - - Live Preview Changes in QML Viewer - Применить изменения к QML Viewer - - - Animation Speed - Скорость анимации - 1x - + 1x 0.5x - + 0.5x 0.25x - + 0.25x 0.125x - + 0.125x 0.1x - + 0.1x @@ -14417,20 +16480,24 @@ Errors: You can continue debugging, but behavior can be unexpected. Можно продолжить отладку, только поведение может быть неожиданным. - - Reload - Перезагрузить - - QmlJSInspector::Internal::QmlJSObjectTree + QmlJSInspector::Internal::QmlJSPropertyInspector - Go to file - Перейти к файлу + Enter expression + Ввести выражение - Url: - Ссылка: + Choose color + Выбрать цвет + + + JavaScript expression for %1 + Выражение JavaScript для %1 + + + Color selection for %1 + Выбор цвета для %1 @@ -14440,6 +16507,66 @@ Errors: Скопировать цвет + + QmlJSTools::Internal::FunctionFilter + + Functions + Функции + + + + QmlJSTools::Internal::ModelManager + + Indexing + Индексация + + + + QmlJSTools::Internal::PluginDumper + + Type dump of QML plugin in %1 failed. +Errors: +%2 + + Не удалось получить типы от модуля QML в %1. +Ошибки: +%2 + + + + Type dump of C++ plugin failed. +First 10 lines or errors: + +%1 +Check 'General Messages' output pane for details. + Не удалось получить типы от C++ модуля. + +%1 +В окне «Основные сообщения» могут быть подробности. + + + Type dump of C++ plugin failed. Parse error: +'%1' + Не удалось получить типы от C++ модуля. Ошибка разбора: +«%1» + + + Could not open file '%1' for reading. + Не удалось открыть файл «%1» для чтения. + + + Failed to parse '%1'. +Error: %2 + Не удалось разобрать «%1». +Ошибка: %2 + + + Could not locate the helper application for dumping type information from C++ plugins. +Please build the debugging helpers on the Qt version options page. + Не удалось обнаружить программу-помощник для получения информации о типах из C++ модуля. +Соберите помощников отладчика в Инструменты - Параметры - Qt4. + + QmlJsEditor @@ -14464,14 +16591,14 @@ Errors: Unclosed string at end of line Незакрытый литерал в конце строки - - Illegal escape squence - Недопустимая ESC-последовательность - Illegal unicode escape sequence Недопустимая ESC-последовательность юникода + + Illegal escape sequence + Недопустимая ESC-последовательность + Unclosed comment at end of file Незакрытый комментарий в конце файла @@ -14490,7 +16617,7 @@ Errors: Invalid regular expression flag '%0' - Некорректный флаг регулярного выражения '%0' + Некорректный флаг регулярного выражения «%0» Unterminated regular expression backslash sequence @@ -14506,11 +16633,11 @@ Errors: Unexpected token `%1' - Неожиданная лексема "%1" + Неожиданная лексема «%1» Expected token `%1' - Ожидаемая лексема "%1" + Ожидаемая лексема «%1» @@ -14524,7 +16651,7 @@ Errors: QmlProjectManager::Internal::Manager Failed opening project '%1': Project already open - Не удалось открыть проект "%1": проект уже открыт + Не удалось открыть проект «%1»: проект уже открыт @@ -14541,24 +16668,6 @@ You can review Qt Quick UI projects in the QML Viewer and you need not build the Проекты Qt Quick можно просматривать в QML Viewer и они не требуют сборки. Для создания и запуска проектов данного типа не требуется установка на компьютер среды разработки. - - File generated by QtCreator - qmlproject Template - Comment added to generated .qmlproject file - Файл созданный QtCreator - - - Include .qml, .js, and image files from current directory and subdirectories - qmlproject Template - Comment added to generated .qmlproject file - Включает файлы .qml, .js и изображений из текущего каталога и его подкаталогов - - - List of plugin directories passed to QML runtime - qmlproject Template - Comment added to generated .qmlproject file - Список каталогов модулей, передаваемый среде выполнения QML - QmlProjectManager::Internal::QmlProjectApplicationWizardDialog @@ -14575,7 +16684,42 @@ You can review Qt Quick UI projects in the QML Viewer and you need not build the QmlProjectManager::Internal::QmlProjectRunConfigurationFactory Run QML Script - Выполнить сценарий QML + Запустить сценарий QML + + + + QmlProjectManager::Internal::QmlProjectRunConfigurationWidget + + Manage Qt versions + Управление профилями Qt + + + Qt version: + Профиль Qt: + + + Arguments: + Параметры: + + + Main QML file: + Основной файл QML: + + + Debugger: + Отладчик: + + + Run Environment + Среда выполнения + + + System Environment + Системная среда + + + Invalid Qt version + Некорректный профиль Qt @@ -14600,7 +16744,7 @@ You can review Qt Quick UI projects in the QML Viewer and you need not build the QmlProjectManager::Internal::QmlRunControlFactory Run - Выполнить + Запустить Open Qt4 Options @@ -14620,14 +16764,14 @@ You can review Qt Quick UI projects in the QML Viewer and you need not build the QML Observer is used to offer debugging features for QML applications, such as interactive debugging and inspection tools. It must be compiled for each used Qt version separately. On the Qt4 options page, select the current Qt installation and click Rebuild. - Обозреватель QML предоставляет дополнительные возможности для отладки приложений QML такие, как интерактивная отладка и инструменты инспектирования. Он должен быть собран отдельно для каждого используемого профиля Qt. На странице настроек Qt4 следует выбрать установка Qt и щёлкнуть "Пересобрать". + Обозреватель QML предоставляет дополнительные возможности для отладки приложений QML такие, как интерактивная отладка и инструменты инспектирования. Он должен быть собран отдельно для каждого используемого профиля Qt. На странице настроек Qt4 следует выбрать установка Qt и щёлкнуть «Пересобрать». QmlProjectManager::QmlProject - Error while loading project file! - Ошибка при загрузке файла проекта! + Error while loading project file %1. + Ошибка при загрузке файла проекта %1. @@ -14637,30 +16781,6 @@ You can review Qt Quick UI projects in the QML Viewer and you need not build the QMLRunConfiguration display name. Просмотр QML - - Manage Qt versions - Управление профилями Qt - - - Qt version: - Профиль Qt: - - - Arguments: - Аргументы: - - - Debugger: - Отладчик: - - - Main QML file: - Основной файл QML: - - - Invalid Qt version - Некорректный профиль Qt - QmlProjectManager::QmlTarget @@ -14670,29 +16790,6 @@ You can review Qt Quick UI projects in the QML Viewer and you need not build the Просмотр QML - - QtQuickAppWizardSourcesPage - - WizardPage - - - - Main QML File - Основной файл QML - - - Import an existing .qml file - Импортировать существующий файл .qml - - - Generate a main.qml file - Создать файл main.qml - - - Note: All files and directories that reside in the same directory as the main QML file are deployed. You can modify the contents of the directory any time before deploying. - Все файлы и подкаталоги, находящиеся в том же каталоге, что и основной файл QML, будут установлены. В любое время можно изменить содержимое этого каталога перед установкой. - - QrcEditor @@ -14727,6 +16824,19 @@ You can review Qt Quick UI projects in the QML Viewer and you need not build the + + Qt4DefaultTargetSetupWidget + + <b>Error:</b> + Severity is Task::Error + <b>Ошибка:</b> + + + <b>Warning:</b> + Severity is Task::Warning + <b>Предупреждение:</b> + + Qt4ProjectManager @@ -14738,38 +16848,136 @@ You can review Qt Quick UI projects in the QML Viewer and you need not build the Профили Qt - Qt C++ Project - Проект Qt С++ + Qt Widget Project + Проект Qt Widget + + + Maemo + Qt4ProjectManager::AbstractMobileApp Could not open desktop file template - Не удалось открыть шаблон файла рабочего стола + Не удалось открыть шаблон файла ярлыка Could not open main.cpp template '%1'. - Не удалось открыть шаблон main.cpp "%1". + Не удалось открыть шаблон main.cpp «%1». Could not open project file template '%1'. - Не удалось открыть шаблонный файл проекта "%1". + Не удалось открыть шаблонный файл проекта «%1». Could not open template file '%1'. - Не удалось открыть шаблонный файл "%1". + Не удалось открыть шаблонный файл «%1». - Qt4ProjectManager::Internal::AbstractMobileAppWizardDialog + Qt4ProjectManager::AbstractMobileAppWizardDialog Qt Versions Профили Qt - Application Options - Опции приложения + Mobile Options + Мобильные параметры + + + Symbian Specific + Особенности Symbian + + + Maemo Specific + Особенности Maemo + + + + Qt4ProjectManager::Internal::AbstractDebBasedQt4MaemoTarget + + Debian changelog file '%1' has unexpected format. + Файл журнала изменений Debian «%1» имеет неожиданный формат. + + + Error writing Debian changelog file '%1': %2 + Ошибка записи журнала изменений Debian «%1»: %2 + + + Invalid icon data in Debian control file. + Неверные данные значка в управляющем файле Debian. + + + Could not read image file '%1'. + Невозможно прочитать файл изображения «%1». + + + Could not export image file '%1'. + Невозможно экспортировать файл изображения «%1». + + + Error writing file '%1': %2 + Ошибка записи файла «%1»: %2 + + + Unable to create Debian templates: dh_make failed (%1) + Не удалось создать шаблоны Debian: ошибка dh_make (%1) + + + Unable to create debian templates: dh_make failed (%1) + Не удалось создать шаблоны debian: ошибка dh_make (%1) + + + Unable to move new debian directory to '%1'. + Невозможно переместить новый каталог debian в «%1». + + + Packaging Error: Cannot open file '%1'. + Ошибка создания пакета: Невозможно открыть файл «%1». + + + Packaging Error: Cannot write file '%1'. + Ошибка создания пакета: Невозможно записать файл «%1». + + + + Qt4ProjectManager::Internal::AbstractQt4MaemoTarget + + File '%1' does not exist + Файл «%1» отсутствует + + + Cannot open file '%1': %2 + Невозможно открыть файл «%1»: %2 + + + Qt Creator + + + + Do you want to remove the packaging file(s) associated with the target '%1'? + Желаете удалить файлы сборки пакета связанные с целью «%1»? + + + Error creating Maemo packaging directory '%1'. + Не удалось создать каталог пакетов Maemo «%1». + + + Add Packaging Files to Project + Добавить в проект файлы создания пакета + + + Qt Creator has set up the following files to enable packaging: + %1 +Do you want to add them to the project? + Qt Creator настроил следующие файлы для создания пакета: + %1 +Желаете добавить их в проект? + + + Error creating Maemo templates + Ошибка создания шаблонов Maemo @@ -14798,8 +17006,8 @@ You can review Qt Quick UI projects in the QML Viewer and you need not build the Модули - Qt Versions - Профили Qt + Targets + Цели @@ -14924,6 +17132,81 @@ You can review Qt Quick UI projects in the QML Viewer and you need not build the Удалить класс %1 из списка? + + Qt4ProjectManager::Internal::CodaRunControl + + No device is connected. Please connect a device and try again. + Устройство не подключено. Подключите устройство и попробуйте снова. + + + Executable file: %1 + Исполняемый файл: %1 + + + Connecting to %1:%2... + Подключение к %1: %2... + + + Error: %1 + Ошибка: %1 + + + Connected. + Подключено. + + + Process has finished. + Процесс завершился. + + + Thread has crashed: %1 + Поток завершился крахом: %1 + + + The device '%1' has been disconnected + Устройство «%1» было отключено + + + The process is already running on the device. Please first close it. + Процесс уже запущен на устройстве. Сначала завершите его. + + + Connecting to '%1'... + Подключение к «%1»... + + + Unable to create CODA connection. Please try again. + Не удалось создать подключение CODA. Попробуйте ещё раз. + + + Could not open serial device: %1 + Не удалось открыть последовательное устройство: %1 + + + Launching: %1 + Запуск: %1 + + + Launched. + Запущено. + + + Launch failed: %1 + Не удалось запустить: %1 + + + Waiting for CODA + Ожидание CODA + + + Qt Creator is waiting for the CODA application to connect.<br>Please make sure the application is running on your mobile phone and the right IP address and/or port are configured in the project settings. + Qt Creator ожидает подключения приложения CODA.<br>Убедитесь, что приложение работает на мобильном телефоне, и указаны корректные IP адрес и порт в настройках проекта. + + + Canceled. + Отменено. + + Qt4ProjectManager::Internal::ConsoleAppWizard @@ -14936,7 +17219,7 @@ You can review Qt Quick UI projects in the QML Viewer and you need not build the Preselects a desktop Qt for building the application if available. Создание проекта, содержащего один файл main.cpp с простейшей реализацией. -Выбирается профиль Qt "Настольный" для сборки приложения, если он доступен. +Выбирается профиль Qt «Настольный» для сборки приложения, если он доступен. @@ -15034,6 +17317,57 @@ Preselects a desktop Qt for building the application if available. Подробнее о модуле + + Qt4ProjectManager::Internal::DebuggingHelper + + Used to extract QML type information from library-based plugins. + Используется для извлечения информации о типах QML из модулей. + + + Build + Собрать + + + Show compiler output of last build. + Показывать вывод компилятора последней сборки. + + + Show Log + Показать журнал + + + Compile debugging helpers that are checked. + Собрать выбранных помощников отладчика. + + + Build All + Собрать всё + + + QML Dump: + Дампер QML: + + + A modified version of qmlviewer with support for QML/JS debugging. + Изменённая версия qmlviewer с поддержкой отладки Qml/JS. + + + QML Observer: + Обозреватель QML: + + + QML Debugging Library: + Отладочная библиотека QML: + + + Helps showing content of Qt types. Only used in older versions of GDB. + Помогает отображать содержимое типов Qt. Используется только в старых версиях GDB. + + + GDB Helper: + Помощник GDB: + + Qt4ProjectManager::Internal::DesignerExternalEditor @@ -15067,6 +17401,14 @@ Preselects a desktop Qt for building the application if available. External Library Внешняя + + System Package + Системный пакет + + + Specify the package to link to + Выберите пакет для компоновки + Internal Library Внутренняя @@ -15094,11 +17436,11 @@ Preselects a desktop Qt for building the application if available. Qt4ProjectManager::Internal::ExternalQtEditor Unable to start "%1" - Не удалось запустить "%1" + Не удалось запустить «%1» The application "%1" could not be found. - Не удалось найти приложение "%1". + Не удалось найти приложение «%1». @@ -15112,6 +17454,21 @@ Preselects a desktop Qt for building the application if available. Укажите базовую информацию о классах, для которых желаете создать шаблоны файлов исходных текстов. + + Qt4ProjectManager::Internal::GcceToolChainFactory + + GCCE + + + + GCCE from Qt version + GCCE из профиля Qt + + + GCCE (%1) + + + Qt4ProjectManager::Internal::GettingStartedWelcomePage @@ -15159,7 +17516,7 @@ Preselects a desktop Qt for building the application if available. <p>The project you are about to open is located in the write-protected location:</p><blockquote>%1</blockquote><p>Please select a writable location below and click "Copy Project and Open" to open a modifiable copy of the project or click "Keep Project and Open" to open the project in location.</p><p><b>Note:</b> You will not be able to alter or compile your project in the current location.</p> - <p>Открываемый проект находится в защищённом от записи каталоге:</p><blockquote>%1</blockquote><p>Ниже выберите каталог, в который разрешена запись, и щёлкните "Скопировать и открыть", для открытия изменяемой копии проекта, или "Открыть для чтения", чтобы открыть проект в текущем каталоге.</p><p><b>Изменение и сборка проекта, расположенного в данном каталоге, недоступны.</b></p> + <p>Открываемый проект находится в защищённом от записи каталоге:</p><blockquote>%1</blockquote><p>Ниже выберите каталог, в который разрешена запись, и щёлкните «Скопировать и открыть», для открытия изменяемой копии проекта, или «Открыть для чтения», чтобы открыть проект в текущем каталоге.</p><p><b>Изменение и сборка проекта, расположенного в данном каталоге, недоступны.</b></p> &Location: @@ -15297,25 +17654,6 @@ Preselects a desktop Qt for building the application if available. Примеры Qt Quick: - - Qt4ProjectManager::Internal::GnuPocS60DevicesWidget - - Step 1 of 2: Choose GnuPoc folder - Шаг 1 из 2: Выбор каталога GnuPoc - - - Step 2 of 2: Choose Qt folder - Шаг 2 из 2: Выбор каталога Qt - - - Adding GnuPoc - Добавление GnuPoc - - - GnuPoc and Qt folders must not be identical. - Каталоги GnuPoc и Qt не должны совпадать. - - Qt4ProjectManager::Internal::GuiAppWizard @@ -15328,11 +17666,11 @@ Preselects a desktop Qt for building the application if available. Preselects a desktop Qt for building the application if available. Создание приложения Qt для настольных компьютеров. Включает основное окно в виде формы дизайнера Qt. -Выбирается профиль Qt "Настольный" для сборки приложения, если он доступен. +Выбирается профиль Qt «Настольный» для сборки приложения, если он доступен. The template file '%1' could not be opened for reading: %2 - Файл шаблона '%1' не может быть открыт для чтения: %2 + Файл шаблона «%1» не может быть открыт для чтения: %2 @@ -15346,6 +17684,43 @@ Preselects a desktop Qt for building the application if available. Подробнее + + Qt4ProjectManager::Internal::Html5AppWizard + + HTML5 Application + Приложение HTML5 + + + Creates an HTML5 application project that can contain both HTML5 and C++ code and includes a WebKit view. + +You can build the application and deploy it on desktop and mobile target platforms. For example, you can create signed Symbian Installation System (SIS) packages for this type of projects. + Создание проекта приложения HTML5, который может содержать код как HTML5, так и на С++, а так же включает просмотрщик WebKit. + +Можно создать приложение и установить его на настольный компьютер и мобильные платформы. Например, можно создать подписанный пакет Symbian Installation System (SIS) для этого типа проектов. + + + + Qt4ProjectManager::Internal::Html5AppWizardDialog + + New HTML5 Application + Новое приложение HTML5 + + + This wizard generates a HTML5 application project. + Этот мастер создаст проект приложения HTML5. + + + HTML Options + Параметры HTML + + + + Qt4ProjectManager::Internal::Html5AppWizardOptionsPage + + Select HTML File + Выбор файла HTML + + Qt4ProjectManager::Internal::LibraryDetailsController @@ -15437,15 +17812,19 @@ Preselects a desktop Qt for building the application if available. Library inside "debug" or "release" subfolder - Библиотека в подкаталоге "debug" или "release" + Библиотека в подкаталоге «debug» или «release» Add "d" suffix for debug version - Добавить суффикс "d" для отладочной версии + Добавить суффикс «d» для отладочной версии Remove "d" suffix for release version - Удалить суффикс "d" для выпускаемой версии + Удалить суффикс «d» для выпускаемой версии + + + Package: + Пакет: @@ -15468,6 +17847,14 @@ Neither the path to the library nor the path to its includes is added to the .pr Компоновка с системной библиотекой. Пути к выбранной библиотеке и её подключаемым файлам не будут добавлены в .pro файл. + + System package + Системный пакет + + + Links to a system library using pkg-config. + Компоновка с системной библиотекой используя pkg-config. + External library Внешняя @@ -15533,6 +17920,10 @@ Adds the library and include paths to the .pro file. Qt4ProjectManager::Internal::MaemoConfigTestDialog + + Testing configuration. This may take a while. + Проверка конфигурации. Это может занять время. + Testing configuration... Тестовая конфигурация... @@ -15560,8 +17951,24 @@ Qemu уже запущен? Неподходящий профиль Qt! Требуется Qt на устройстве: 4.6.2 и выше. - Mad Developer is not installed.<br>You will not be able to deploy to this device. - Mad Developer не установлен.<br>Установка на это устройство невозможна. + %1 is not installed.<br>You will not be able to deploy to this device. + %1 не установлен.<br>Установка на это устройство невозможна. + + + Please switch the device to developer mode via Settings -> Security. + Переключите устройство в режим разработчика в Settings -> Security. + + + Error retrieving list of used ports: %1 + Ошибка получения списка используемых портов: %1 + + + All specified ports are available. + Все указанные порты доступны. + + + The following supposedly free ports are being used on the device: + На устройстве используются следующие обычно свободные порты: Device configuration okay. @@ -15600,21 +18007,21 @@ Qemu уже запущен? Qt4ProjectManager::Internal::MaemoDebugSupport - - No device configuration set for run configuration. - Не выбрана конфигурация устройства для запуска. - Preparing remote side ... Подготовка удалённой стороны... + + SSH connection error: %1 + Ошибка подключения SSH: %1 + Upload failed: Could not open file '%1' - Ошибка при отправке: Не удалось открыть файл "%1" + Ошибка при отправке: Не удалось открыть файл «%1» Started uploading debugging helpers ('%1'). - Запущена отправка помощников отладчика ("%1"). + Запущена отправка помощников отладчика («%1»). Could not upload debugging helpers: %1. @@ -15628,6 +18035,10 @@ Qemu уже запущен? Initial setup failed: %1 Не удалось выполнить начальную настройку: %1 + + Not enough free ports on device for debugging. + Для отладки не достаточно свободных портов на устройстве. + Qt4ProjectManager::Internal::MaemoDeployStep @@ -15635,6 +18046,10 @@ Qemu уже запущен? Deployment failed: No valid device set. Ошибка установки: Не указано корректное устройство. + + Connection error: %1 + Ошибка подключения: %1 + Connecting to device... Подключение к устройству... @@ -15644,25 +18059,33 @@ Qemu уже запущен? Все файлы уже обновлены, установка не требуется. - Deploy to Maemo device + Deploy to Maemo5 device MaemoDeployStep default display name - Установить на устройство Maemo + Установить на устройство Maemo5 - Cannot start deployment, as the clean-up from the last time has not finished yet. - Невозможно начать установку, так как не произведена очистка после предыдущего раза. + Deploy to Harmattan device + Установить на устройство Harmattan - Could not connect to host: %1 - Ну удалось подключиться к узлу: %1 + Deploy to Meego device + Установить на устройство Meego + + + Cannot deploy: Still cleaning up from last time. + Невозможно установить: всё ещё идёт очистка с предыдущего раза. + + + Deployment failed: Qemu was not running. It has now been started up for you, but it will take a bit of time until it is ready. + Не удалось установить: Qemu ещё не запущен. Он перейдёт в состояние готовности через некоторое время. Upload failed: Could not open file '%1' - Ошибка при отправке: Не удалось открыть файл "%1" + Ошибка при отправке: Не удалось открыть файл «%1» Started uploading file '%1'. - Начата отправка файла "%1". + Начата отправка файла «%1». Could not set up SFTP connection: %1 @@ -15674,7 +18097,11 @@ Qemu уже запущен? Successfully uploaded file '%1'. - Успешно отправлен файл "%1". + Успешно отправлен файл «%1». + + + Deployment failed. + Установка не удалась. Deployment finished. @@ -15694,7 +18121,7 @@ Qemu уже запущен? Sysroot installation failed: Could not copy '%1' to '%2'. Continuing anyway. - Не удалось установить в sysroot: Не удалось скопировать "%1" в "%2". В любом случае продолжаем. + Не удалось установить в sysroot: Не удалось скопировать «%1» в «%2». В любом случае продолжаем. Installing package to device... @@ -15702,19 +18129,15 @@ Qemu уже запущен? Copying file '%1' to path '%2' on the device... - Копирование файла "%1" в "%2" на устройстве... - - - Device has not enough free ports for deployment. - У устройства недостаточно свободных портов для установки. + Копирование файла «%1» в «%2» на устройстве... Copying file '%1' failed. - Не удалось скопировать файл "%1". + Не удалось скопировать файл «%1». Successfully copied file '%1'. - Файл "%1" успешно скопирован. + Файл «%1» успешно скопирован. All files copied. @@ -15724,6 +18147,10 @@ Qemu уже запущен? Installing package failed. Не удалось установить пакет. + + Installation failed: You tried to downgrade a package, which is not allowed. + Установка не удалась: была попытка установить пакет с версией ниже текущей, а это не разрешено. + Package installed. Пакет установлен. @@ -15742,20 +18169,48 @@ Qemu уже запущен? <b>Deploy to device</b>: %1 <b>Установить на устройство</b>: %1 + + Could not create desktop file + Не удалось создать файл .desktop + + + Error creating desktop file: %1 + Ошибка создания файла .desktop: %1 + + + Choose Icon (will be scaled to 64x64 pixels, if necessary) + Выберите значок (размер при необходимости будет изменён до 64x64) + + + Invalid Icon + Неверный значок + + + Unable to read image + Не удалось прочитать изображение + + + Failed to Save Icon + Не удалось сохранить значок + + + Could not save icon to '%1'. + Не удалось сохранить значок в «%1». + + + Could Not Add Icon + Не удалось добавить значок + + + Error adding icon: %1 + Ошибка добавления значка: %1 + Qt4ProjectManager::Internal::MaemoDeployableListModel - File already in list. - Файл уже в списке. - - - Failed to update .pro file. - Не удалось обновить файл .pro. - - - Could not update .pro file. - Невозможно обновить файл .pro. + <no target path set> + <целевой путь не задан> Local File Path @@ -15765,12 +18220,190 @@ Qemu уже запущен? Remote Directory Внешний каталог + + Failed to open '%1': %2 + Не удалось открыть «%1»: %2 + + + Could not write '%1': %2 + Не удалось записать в «%1»: %2 + + + Error writing project file. + Ошибка записи файла проекта. + + + + Qt4ProjectManager::Internal::MaemoDeviceConfigWizard + + New Device Configuration Setup + Настройка новой конфигурации устройства + + + + Qt4ProjectManager::Internal::MaemoDeviceConfigWizardFinalPage + + Setup Finished + Настройка завершена + + + The new device configuration will now be created and a test procedure will be run to check whether Qt Creator can connect to the device and to provide some information about its features. + Сейчас будет создана новая конфигурация устройства, а так же запущена процедура проверки подключения Qt Creator к устройству и загрузки некоторой информации об устройстве. + + + The new device configuration will now be created. + Будет создана конфигурация нового устройства. + + + + Qt4ProjectManager::Internal::MaemoDeviceConfigWizardKeyCreationPage + + Key Creation + Создание ключей + + + Cannot Create Keys + Не удалось создать ключи + + + The path you have entered is not a directory. + Введённый путь не является каталогом. + + + The directory you have entered does not exist and cannot be created. + Введённый каталог не существует и не может быть создан. + + + Creating keys ... + Создание ключей... + + + Key creation failed: %1 + Не удалось создать ключи: %1 + + + Done. + Готово. + + + Failed to save key file %1: %2 + Не удалось сохранить файл ключа %1: %2 + + + Could Not Save File + Не удалось сохранить файл + + + + Qt4ProjectManager::Internal::MaemoDeviceConfigWizardKeyDeploymentPage + + Key Deployment + Установка ключа + + + Deploying... + Установка... + + + Key Deployment Failure + Не удалось установить ключ + + + Key Deployment Success + Ключ успешно установлен + + + The key was successfully deployed. You may now close the "%1" application and continue. + Ключ был успешно установлен. Теперь можно закрыть приложение «%1» и продолжить. + + + Done. + Готово. + + + + Qt4ProjectManager::Internal::MaemoDeviceConfigWizardPreviousKeySetupCheckPage + + Device Status Check + Проверка состояния устройства + + + + Qt4ProjectManager::Internal::MaemoDeviceConfigWizardReuseKeysCheckPage + + Existing Keys Check + Проверка существующих ключей + + + + Qt4ProjectManager::Internal::MaemoDeviceConfigWizardStartPage + + General Information + Общая информация + + + + Qt4ProjectManager::Internal::MaemoDeviceConfigurations + + (default for %1) + (по умолчанию для %1) + + + + Qt4ProjectManager::Internal::MaemoDeviceConfigurationsSettingsPage + + Maemo Device Configurations + Конфигурации устройств Maemo + + + + Qt4ProjectManager::Internal::MaemoDeviceConfigurationsSettingsWidget + + Physical Device + Физическое устройство + + + Emulator (Qemu) + Эмулятор (Qemu) + + + Choose Public Key File + Выбор файла открытого ключа + + + Public Key Files(*.pub);;All Files (*) + Файлы открытых ключей (*.pub);;Все файлы (*) + + + Deployment Failed + Установка не удалась + + + Stop Deploying + Прекратить установку + + + Deployment Succeeded + Установка выполнена + + + Key was successfully deployed. + Ключ был успешно установлен. + + + Deploy Public Key ... + Установить ключ... + + + You will need at least one port. + Требуется хотя бы один порт. + Qt4ProjectManager::Internal::MaemoDeviceEnvReader - Could not connect to host: %1 - Ну удалось подключиться к узлу: %1 + Connection error: %1 + Ошибка подключения: %1 Error running remote process: %1 @@ -15780,7 +18413,69 @@ Qemu уже запущен? Remote stderr was: '%1' -Удалённые сообщения об ошибках: "%1" +Удалённые сообщения об ошибках: «%1» + + + + Qt4ProjectManager::Internal::MaemoGlobal + + Could not connect to host: %1 + Ну удалось подключиться к узлу: %1 + + + +Did you start Qemu? + +Qemu уже запущен? + + + +Is the device connected and set up for network access? + +Устройство уже подключено? Доступ в сеть настроен? + + + (No device) + (Нет устройства) + + + SDK Connectivity + + + + Mad Developer + + + + Failed to remove directory '%1'. + Не удалось удалить каталог «%1». + + + Failed to remove file '%1'. + Не удалось удалить файл «%1». + + + Failed to create directory '%1'. + Не удалось создать каталог «%1». + + + Could not copy file '%1' to '%2'. + Не удалось скопировать файл «%1» в «%2». + + + + Qt4ProjectManager::Internal::MaemoKeyDeployer + + Could not read public key file '%1'. + Не удалось прочитать файл открытого ключа «%1». + + + Connection failed: %1 + Ошибка подключения: %1 + + + Key deployment failed: %1. + Не удалось установить ключ: %1. @@ -15796,17 +18491,13 @@ Remote stderr was: '%1' Creating package file ... Создание файла пакета... - - Cannot open MADDE config file '%1'. - Невозможно открыть конфигурационный файл MADDE "%1". - Package created. Пакет создан. Package Creation: Running command '%1'. - Создание пакета: Выполнение команды "%1". + Создание пакета: Выполнение команды «%1». Packaging failed. @@ -15816,13 +18507,9 @@ Remote stderr was: '%1' Packaging for Maemo Создание пакета для Maemo - - Could not remove directory '%1'. - Невозможно удалить каталог "%1". - Could not copy file '%1' to '%2' - Невозможно скопировать файл "%1" в "%2" + Невозможно скопировать файл «%1» в «%2» Could not move package files from %1 to %2. @@ -15832,29 +18519,37 @@ Remote stderr was: '%1' Package up to date. Пакет уже обновлён. + + Could not move package file from %1 to %2. + Не удалось переместить файл пакета из %1 в %2. + Packaging failed: Foreign debian directory detected. Не удалось создать пакет: обнаружен другой каталог debian. You are not using a shadow build and there is a debian directory in your project root ('%1'). Qt Creator will not overwrite that directory. Please remove it or use the shadow build feature. - Теневая сборка не используется, а в корневом каталоге проекта ("%1") находится каталог dibian. Qt Creator не будет его перезаписывать. Этот каталог следует удалить или использовать теневую сборку. + Теневая сборка не используется, а в корневом каталоге проекта («%1») находится каталог dibian. Qt Creator не будет его перезаписывать. Этот каталог следует удалить или использовать теневую сборку. + + + Could not remove directory '%1': %2 + Не удалось удалить каталог «%1»: %2 Could not create Debian directory '%1'. - Невозможно создать каталог Debian "%1". + Невозможно создать каталог Debian «%1». Error: Could not create file '%1'. - Ошибка: Невозможно создать файл "%1". + Ошибка: Невозможно создать файл «%1». Packaging error: Could not start command '%1'. Reason: %2 - Ошибка создания пакета: Не удалось выполнить команду "%1" по причине: %2 + Ошибка создания пакета: Не удалось выполнить команду «%1» по причине: %2 Packaging Error: Command '%1' failed. - Ошибка создания пакета: Команда "%1" завершилась с ошибкой. + Ошибка создания пакета: Команда «%1» завершилась с ошибкой. Reason: %1 @@ -15869,8 +18564,8 @@ Remote stderr was: '%1' They must only use lower-case letters, numbers, '-', '+' and '.'. We will try to work around that, but you may experience problems. Название проекта содержит недопустимые для пакетов Debian символы. -Допустимы только буквы в нижнем регистре, числа, "-", "+" и ".". -Будет предпринята попытка обойти это, но возможны проблемы. +Допустимы только буквы в нижнем регистре, числа, «-», «+» и «.». +Будет предпринята попытка обойти это, но могут возникнуть проблемы. @@ -15887,14 +18582,26 @@ We will try to work around that, but you may experience problems. Images Изображения - - Choose Image - Выберите изображение - Could Not Set New Icon Невозможно установить новый значок + + File Error + Ошибка файла + + + Could not set project name. + Не удалось задать имя проекта. + + + Could not set package name for project manager. + Не удалось задать имя пакета для менеджера пакетов. + + + Could not set project description. + Не удалось задать описание проекта. + Could Not Set Version Number Невозможно задать новый номер версии @@ -15903,11 +18610,22 @@ We will try to work around that, but you may experience problems. <b>Create Package:</b> <b>Создать пакет:</b> + + Choose Image (will be scaled to 48x48 pixels if necessary) + Выбор изображения (при необходимости будет растянуто до 48х48 пикселей) + (Packaging disabled) (Создание пакета отключено) + + Qt4ProjectManager::Internal::MaemoPerTargetDeviceConfigurationListModel + + (default) + (по умолчанию) + + Qt4ProjectManager::Internal::MaemoProFilesUpdateDialog @@ -15915,6 +18633,238 @@ We will try to work around that, but you may experience problems. Обновляемые файлы проекта + + Qt4ProjectManager::Internal::MaemoPublishedProjectModel + + Include in package + Включать в пакет + + + Include + Включать + + + Do not include + Не включать + + + + Qt4ProjectManager::Internal::MaemoPublisherFremantleFree + + Canceled. + Отменено. + + + Publishing canceled by user. + Публикация отменена пользователем. + + + The project is missing some information important to publishing: + У проекта отсутствует информация, необходимая для публикации: + + + Publishing failed: Missing project information. + Не удалось опубликовать: отсутствует информация о проекте. + + + Removing left-over temporary directory ... + Удаление временного каталога... + + + Publishing failed: Could not create source package. + Не удалось опубликовать: не удалось создать архив исходников. + + + Setting up temporary directory ... + Подготовка временного каталога... + + + Error: Could not create temporary directory. + Ошибка: не удалось создать временный каталог. + + + Error: Could not copy project directory + Ошибка: не удалось скопировать каталог проекта + + + Cleaning up temporary directory ... + Очистка временного каталога... + + + Publishing failed: Could not create package. + Не удалось опубликовать: не удалось создать пакет. + + + Error removing temporary directory: %1 + Ошибка удаления временного каталога: %1 + + + Error: Could not fix newlines + Ошибка: Не удалось исправить окончания строк + + + Failed to create directory '%1'. + Не удалось создать каталог «%1». + + + Could not copy file '%1' to '%2'. + Не удалось скопировать файл «%1» в «%2». + + + Error: Cannot open file '%1'. + Ошибка: не удалось открыть файл «%1». + + + Error: Failed to start dpkg-buildpackage. + Ошибка: не удалось запустить dpkg-buildpackage. + + + Error: dpkg-buildpackage did not succeed. + Ошибка: dpkg-buildpackage завершился с ошибкой. + + + Package creation failed. + Не удалось создать пакет. + + + Done. + Готово. + + + Packaging finished successfully. The following files were created: + + Создание пакета успешно завершено. Созданы следующие файлы: + + + + Building source package... + Создание пакета исходников... + + + Starting scp ... + Запуск scp... + + + SSH error: %1 + Ошибка SSH: %1 + + + Upload failed. + Отправка не удалась. + + + Error uploading file: %1 + Ошибка отправки файла: %1 + + + Error uploading file. + Ошибка отправки файла. + + + All files uploaded. + Все файлы отправлены. + + + Upload succeeded. You should shortly receive an email informing you about the outcome of the build process. + Отправка успешно завершена. Скоро придёт электронное письмо с результатом сборки. + + + Uploading file %1 ... + Отправка файла %1... + + + Cannot open file for reading: %1 + Не удалось открыть файл для чтения: %1 + + + Cannot read file: %1 + Не удалось прочитать файл: %1 + + + Failed to adapt desktop file '%1'. + Не удалось настроить файл .desktop «%1». + + + The package description is empty. You must set one in Projects -> Run -> Create Package -> Details. + Описание проекта пусто. Необходимо задать его в Проекты -> Запуск -> Создание пакета -> Подробнее. + + + The package description is '%1', which is probably not what you want. Please change it in Projects -> Run -> Create Package -> Details. + Описание «%1», возможно не то, что ожидается. Смените его в Проекты -> Запуск -> Создание пакета -> Подробнее. + + + You have not set an icon for the package manager. The icon must be set in Projects -> Run -> Create Package -> Details. + Значок для менеджера пакетов не задан. Он должен быть задан в Проекты -> Запуск -> Создание пакета -> Подробнее. + + + + Qt4ProjectManager::Internal::MaemoPublishingUploadSettingsPageFremantleFree + + Publishing to Fremantle's "Extras-devel/free" Repository + Публикация в хранилище «Extras-devel/free» от Fremantle + + + Upload options + Настройки отправки + + + Choose a private key file + Выберите секретный ключ + + + + Qt4ProjectManager::Internal::MaemoPublishingWizardFactoryFremantleFree + + Publish for "Fremantle Extras-devel free" repository + Публикация в хранилище «Extras-devel/free» от Fremantle + + + This wizard will create a source archive and optionally upload it to a build server, where the project will be compiled and packaged and then moved to the "Extras-devel free" repository, from where users can install it onto their N900 devices. For the upload functionality, an account at garage.maemo.org is required. + Этот мастер создаст архив исходников и отправит (опционально) их на сервер сборки, где проект будет скомпилирован и собран в пакет, а затем помещён в хранилище «Extras-devel free». Оттуда пользователи смогут установить его на свои устройства N900. Для отправки необходима учётная запись на garage.maemo.org. + + + + Qt4ProjectManager::Internal::MaemoPublishingWizardFremantleFree + + Publishing to Fremantle's "Extras-devel free" Repository + Публикация в хранилище «Extras-devel/free» от Fremantle + + + Build Settings + Настройки сборки + + + Upload Settings + Настройки отправки + + + Result + Результат + + + + Qt4ProjectManager::Internal::MaemoQemuCrashDialog + + Qemu error + Ошибка Qemu + + + Qemu crashed. + Qemu завершился крахом. + + + Click here to change the OpenGL mode. + Щёлкните здесь для смены режима OpenGL. + + + You have configured Qemu to use OpenGL hardware acceleration, which might not be supported by your system. You could try using software rendering instead. + Qemu настроен на аппаратное ускорение OpenGL, которое, возможно, не поддерживается вашей системой. Попробуйте включить программную отрисовку. + + + Qemu is currently configured to auto-detect the OpenGL mode, which is known to not work in some cases. You might want to use software rendering instead. + Qemu настроен на автоматическое определение режима OpenGL, которое иногда не работает. Попробуйте включить программную отрисовку. + + Qt4ProjectManager::Internal::MaemoQemuManager @@ -15933,10 +18883,6 @@ We will try to work around that, but you may experience problems. Qemu failed to start: %1 Qemu не удалось запуститься: %1 - - Qemu crashed - Qemu завершился крахом - Qemu error Ошибка Qemu @@ -15946,6 +18892,13 @@ We will try to work around that, but you may experience problems. Остановить эмулятор Maemo + + Qt4ProjectManager::Internal::MaemoQemuSettingsPage + + Qemu Settings + Настройки Qemu + + Qt4ProjectManager::Internal::MaemoRemoteMounter @@ -15972,27 +18925,11 @@ We will try to work around that, but you may experience problems. stderr was: '%1' -содержимое stderr: "%1" +содержимое stderr: «%1» - Setting up SFTP connection... - Установка SFTP соединения... - - - Failed to establish SFTP connection: %1 - Не удалось установить соединение SFTP: %1 - - - Uploading UTFS client... - Отправка клиента UTFS... - - - Could not upload UTFS client (%1). - Не удалось отправить слиент UTFS (%1). - - - Could not upload UTFS client (%1), continuing anyway. - Не удалось отправить слиент UTFS (%1), продолжаем. + Error: Not enough free ports on device to fulfill all mount requests. + Ошибка: на устройстве недостаточно свободных портов для выполнения всех требуемых монтирований. Starting remote UTFS clients... @@ -16036,6 +18973,46 @@ stderr was: %1 Внешняя точка монтрования + + Qt4ProjectManager::Internal::MaemoRemoteProcessList + + Connection failure: %1 + Ошибка подключения: %1 + + + Error: Remote process failed to start: %1 + Ошибка: не удалось запустить внешний процесс: %1 + + + Error: Remote process crashed: %1 + Ошибка: внешний процесс завершился крахом: %1 + + + Remote process failed. + Внешний процесс завершился с ошибкой. + + + +Remote stderr was: %1 + +Содержимое внешнего stderr: %1 + + + PID + + + + Command Line + Командная строка + + + + Qt4ProjectManager::Internal::MaemoRemoteProcessesDialog + + Remote Error + Удалённая ошибка + + Qt4ProjectManager::Internal::MaemoRunConfiguration @@ -16070,18 +19047,18 @@ stderr was: %1 Arguments: Параметры: - - Use remote gdb - Использовать внешний gdb - - - Use remote gdbserver - Использовать внешний gdbserver - Base environment for this run configuration: Базовая среда данной конфигурации выполнения: + + <b>Debugging details:</b> Use GDB + <b>Особенности отладки:</b> используется GDB + + + <b>Debugging details:</b> Use GDB server + <b>Особенности отладки:</b> используется сервер GDB + Cancel Fetch Operation Прервать операцию загрузки @@ -16146,6 +19123,14 @@ stderr was: %1 Debugging type: Тип отладки: + + Use remote GDB + Использовать удалённый GDB + + + Use remote GDB server + Использовать удалённый сервер GDB + System Environment Системная среда @@ -16158,14 +19143,6 @@ stderr was: %1 Choose directory to mount Выбор каталога для монтирования - - <b>Debugging details:</b> Use gdb - <b>Особенности отладки:</b> используется gdb - - - <b>Debugging details:</b> Use gdbserver - <b>Особенности отладки:</b> используется gdbserver - %n local directories to be mounted on the device. Note: Only mountCount>1 will occur here as 0, 1 are handled above. @@ -16178,14 +19155,6 @@ stderr was: %1 Qt4ProjectManager::Internal::MaemoRunControl - - No device configuration set for run configuration. - Не выбрана конфигурация устройства для запуска. - - - Run configuration no longer available. - Конфигурация запуска больше недоступна. - Starting remote process ... Запуск внешнего процесса... @@ -16203,66 +19172,7 @@ stderr was: %1 Qt4ProjectManager::Internal::MaemoRunControlFactory Run on device - Выполнить на устройстве - - - - Qt4ProjectManager::Internal::MaemoSettingsPage - - Maemo Device Configurations - Конфигурации устройств Maemo - - - - Qt4ProjectManager::Internal::MaemoSettingsWidget - - New Device Configuration %1 - Standard Configuration name with number - Новая конфигурация устройства %1 - - - Public Key Files(*.pub);;All Files (*) - Файлы открытых ключей (*.pub);;Все файлы (*) - - - Could not read public key file '%1'. - Не удалось прочитать файл открытого ключа "%1". - - - Key deployment failed: %1. - Не удалось установить ключ: %1. - - - Deploy Public Key ... - Установить ключ... - - - You will need at least one port. - Требуется хотя бы один порт. - - - Deployment Failed - Установка не удалась - - - Choose Public Key File - Выбор файла открытого ключа - - - Stop Deploying - Прекратить установку - - - Could not connect to host: %1 - Ну удалось подключиться к узлу: %1 - - - Key was successfully deployed. - Ключ был успешно установлен. - - - Deployment Succeeded - Установка выполнена + Запустить на устройстве @@ -16282,7 +19192,7 @@ stderr was: %1 Could not write file '%1': %2 - Не удалось записать файл "%1": + Не удалось записать файл «%1»: %2 @@ -16292,14 +19202,6 @@ stderr was: %1 Connecting to device... Подключение к устройству... - - Could not connect to host: %1 - Ну удалось подключиться к узлу: %1 - - - Connection failed: %1 - Не удалось подключиться: %1 - Killing remote process(es)... Завершение внешних процессов... @@ -16308,10 +19210,6 @@ stderr was: %1 Initial cleanup failed: %1 Не удалось выполнить начальную очистку: %1 - - The device does not have enough free ports for this run configuration. - У устройства недостаточно свободных портов для этой конфигурации запуска. - Mounting host directories... Монтирование каталогов компьютера... @@ -16332,72 +19230,68 @@ stderr was: %1 Cannot run: No remote executable set. Запуск невозможен: Не указана внешняя программа. + + Cannot run: No device configuration set. + Невозможно выполнить: конфигурация устройства не задана. + + + Cannot run: Qemu was not running. It has now been started up for you, but it will take a bit of time until it is ready. + Не удалось запустить: Qemu ещё не запущен. Он перейдёт в состояние готовности через некоторое время. + + + Connection error: %1 + Ошибка подключения: %1 + Error running remote process: %1 Ошибка выполнения внешнего процесса: %1 - Qt4ProjectManager::Internal::MaemoTemplatesManager + Qt4ProjectManager::Internal::MaemoToolChainConfigWidget - Error creating Maemo packaging directory '%1'. - Не удалось создать каталог пакетов Maemo "%1". + <html><head/><body><table><tr><td>Path to MADDE:</td><td>%1</td></tr><tr><td>Path to MADDE target:</td><td>%2</td></tr><tr><td>Debugger:</td/><td>%3</td></tr></body></html> + <html><head/><body><table><tr><td>Путь к MADDE:</td><td>%1</td></tr><tr><td>Путь к цели MADDE:</td><td>%2</td></tr><tr><td>Отладчик:</td/><td>%3</td></tr></body></html> + + + + Qt4ProjectManager::Internal::MaemoToolChainFactory + + Maemo GCC + - Unable to create Debian templates: dh_make failed (%1) - Не удалось создать шаблоны Debian: ошибка dh_make (%1) + Maemo GCC for %1 + Maemo GCC для %1 - Unable to create debian templates: dh_make failed (%1) - Не удалось создать шаблоны debian: ошибка dh_make (%1) + %1 GCC (%2) + + + + + Qt4ProjectManager::Internal::MaemoUsedPortsGatherer + + Connection error: %1 + Ошибка подключения: %1 - Unable to move new debian directory to '%1'. - Невозможно переместить новый каталог debian в "%1". + Could not start remote process: %1 + Невозможно запустить внешний процесс: %1 - Packaging Error: Cannot open file '%1'. - Ошибка создания пакета: Невозможно открыть файл "%1". + Remote process crashed: %1 + Внешний процесс завершился крахом: %1 - Packaging Error: Cannot write file '%1'. - Ошибка создания пакета: Невозможно записать файл "%1". + Remote process failed: %1 + Внешний процесс завершился с ошибкой: %1 - Debian changelog file '%1' has unexpected format. - Файл журнала изменений Debian "%1" имеет неожиданный формат. - - - Error writing Debian changelog file '%1': %2 - Ошибка записи журнала изменений Debian "%1": %2 - - - Invalid icon data in Debian control file. - Неверные данные значка в управляющем файле Debian. - - - Could not read image file '%1'. - Невозможно прочитать файл изображения "%1". - - - Could not export image file '%1'. - Невозможно экспортировать файл изображения "%1". - - - Error writing file '%1': %2 - Ошибка записи файла "%1": %2 - - - Error creating Maemo templates - Ошибка создания шаблонов Maemo - - - File '%1' does not exist - Файл "%1" отсутствует - - - Cannot open file '%1': %2 - Невозможно открыть файл "%1": %2 + +Remote error output was: %1 + +Внешний вывод ошибок: %1 @@ -16408,7 +19302,7 @@ stderr was: %1 - Qt4ProjectManager::Internal::MobileAppWizardOptionsPage + Qt4ProjectManager::Internal::MobileAppWizardGenericOptionsPage Automatically Rotate Orientation Автоматически вращать @@ -16421,17 +19315,32 @@ stderr was: %1 Lock to Portrait Orientation Зафиксировать портретную + + + Qt4ProjectManager::Internal::MobileAppWizardMaemoOptionsPage + + Invalid Icon + Неверный значок + The file is not a valid image. Файл не является изображением. - The icon has an invalid size. - У значка неверный размер. + Wrong Icon Size + Неверный размер значка - Icon unusable - Непригодный значок + The icon needs to be 64x64 pixels big, but is not. Do you want Creator to scale it? + Значок должен быть размером 64х64. Желаете, чтобы Qt Creator подогнал размер? + + + File Error + Ошибка файла + + + Could not copy icon file. + Не удалось скопировать файл значка. @@ -16463,7 +19372,7 @@ stderr was: %1 Qt4ProjectManager::Internal::ProjectLoadWizard - Project setup + Project Setup Настройка проекта @@ -16474,71 +19383,11 @@ stderr was: %1 qmake - - Qt4ProjectManager::Internal::QtQuickApp - - The QML import path '%1' cannot be found. - Не удалось найти путь импорта QML "%1". - - - The QML module '%1' cannot be found. - Не удалось найти модуль QML "%1". - - - Invalid '%1' entry in '%2' of module '%3'. - Неверная "%1" запись в "%2" модуля "%3". - - - No .pro file for plugin '%1' cannot be found. - Не удалось найти файл .pro для модуля "%1". - - - Could not write file '%1'. - Не удалось записать файл "%1". - - - - Qt4ProjectManager::Internal::QtQuickAppWizard - - Qt Quick Application - Приложение Qt Quick - - - Creates a Qt Quick application project that can contain both QML and C++ code and includes a QDeclarativeView. - -You can build the application and deploy it on desktop and mobile target platforms. For example, you can create signed Symbian Installation System (SIS) packages for this type of projects. - Создание проекта приложения Qt Quick, который может содержать код как QML, так и на С++, а так же включает QDeclarativeView. - -Можно создать приложение и установить его на настольный компьютер и мобильные платформы. Например, можно создать подписанный пакет Symbian Installation System (SIS) для этого типа проектов. - - - - Qt4ProjectManager::Internal::QtQuickAppWizardDialog - - New Qt Quick Application - Новое приложение Qt Quick - - - This wizard generates a Qt Quick application project. - Этот мастер создаст проект приложения Qt Quick. - - - QML Sources - Исходники QML - - - - Qt4ProjectManager::Internal::QtQuickAppWizardSourcesPage - - Select QML File - Выбор файла QML - - Qt4ProjectManager::Internal::Qt4BuildConfigurationFactory Using Qt Version "%1" - Используется профиль Qt "%1" + Используется профиль Qt «%1» New Configuration @@ -16550,22 +19399,28 @@ You can build the application and deploy it on desktop and mobile target platfor %1 Debug + Debug build configuration. We recommend not translating it. %1 Отладка %1 Release + Release build configuration. We recommend not translating it. %1 Релиз - Qt4ProjectManager::Internal::Qt4DeployConfigurationFactory + Qt4ProjectManager::Internal::Qt4MaemoDeployConfigurationFactory - Deploy to Symbian device - Установить на устройство Symbian + Deploy to Maemo5 device + Установить на устройство Maemo5 - Deploy to Maemo device - Установить на устройство Maemo + Deploy to Harmattan device + Установить на устройство Harmattan + + + Deploy to Meego device + Установить на устройство Meego @@ -16627,7 +19482,7 @@ You can build the application and deploy it on desktop and mobile target platfor Could not find .pro file for sub dir '%1' in '%2' - Не удалось найти .pro файл для подкаталога '%1' в '%2' + Не удалось найти .pro файл для подкаталога «%1» в «%2» @@ -16652,10 +19507,19 @@ You can build the application and deploy it on desktop and mobile target platfor using Qt version: <b>%1</b><br>with tool chain <b>%2</b><br>building in <b>%3</b> используется профиль Qt: <b>%1</b><br>с инструментарием <b>%2</b><br>сборка в <b>%3</b> + + <Invalid tool chain> + <Неверный инструментарий> + Invalid Qt version Некорректный профиль Qt + + An build for a different project exists in %1, which will be overwritten. + %1 build directory + %1 уже является каталогом сборки другого проекта. Содержимое будет перезаписано. + Error: Ошибка: @@ -16669,6 +19533,10 @@ You can build the application and deploy it on desktop and mobile target platfor %1 build directory В %1 обнаружена несовместимая сборка. Она будет замещена. + + <No tool chain selected> + <Инструментарий не выбран> + General Основное @@ -16702,7 +19570,7 @@ You can build the application and deploy it on desktop and mobile target platfor Qt4ProjectManager::Internal::Qt4ProjectManagerPlugin Run qmake - Выполнить qmake + Запустить qmake Build @@ -16716,6 +19584,10 @@ You can build the application and deploy it on desktop and mobile target platfor Clean Очистить + + Jump to File Under Cursor + Перейти к файлу под курсором + Add Library... Добавить библиотеку... @@ -16796,6 +19668,25 @@ You can build the application and deploy it on desktop and mobile target platfor Использовать отладочные версии библиотек (DYLD_IMAGE_SUFFIX=_debug) + + Qt4ProjectManager::Internal::Qt4SymbianTarget + + <b>Device:</b> Not connected + <b>Устройство:</b> не подключено + + + <b>Device:</b> %1 + <b>Устройство:</b> %1 + + + <b>Device:</b> %1, %2 + <b>Устройство:</b> %1, %2 + + + <b>IP address:</b> %1:%2 + <b>IP адрес:</b> %1:%2 + + Qt4ProjectManager::Internal::Qt4Target @@ -16823,39 +19714,6 @@ You can build the application and deploy it on desktop and mobile target platfor Qt4 Maemo Device target display name Устройство Maemo - - Maemo - Qt4 Maemo target display name - Maemo - - - Qt Simulator - Qt4 Simulator target display name - Эмулятор Qt - - - <b>Device:</b> %1 - <b>Устройство:</b> %1 - - - <b>Device:</b> %1, %2 - <b>Устройство:</b> %1, %2 - - - <b>Device:</b> Not connected - <b>Устройство:</b> не подключено - - - - Qt4ProjectManager::Internal::Qt4TargetFactory - - Debug - Отладка - - - Release - Релиз - Qt4ProjectManager::Internal::QtOptionsPageWidget @@ -16871,22 +19729,10 @@ You can build the application and deploy it on desktop and mobile target platfor Select qmake Executable Выберите исполняемый файлы qmake - - Select the MinGW Directory - Выберите каталог MinGW - - - Select Carbide Install Directory - Выберите каталог, в который установлен Carbide - Select S60 SDK Root Выберите корень SDK для S60 - - Select the CSL ARM Toolchain (GCCE) Directory - Выберите каталог с инструментарием CSL ARM (GCCE) - Auto-detected Автоопределённая @@ -16901,123 +19747,250 @@ You can build the application and deploy it on desktop and mobile target platfor Debugging Helper Build Log for '%1' - Журнал помощника отладчика для "%1" + Журнал помощника отладчика для «%1» - Binary not found - Программа не найдена + Helpers: %1. + %1 is list of tool names. + Помощники: %1. - <html><body><table><tr><td colspan="2"><b>GDB debugging helpers</b></td></tr><tr><td>File:</td><td><pre>%1</pre></td></tr><tr><td>Last&nbsp;modified:</td><td>%2</td></tr><tr><td>Size:</td><td>%3 Bytes</td></tr><tr><td colspan="2"><b>QML type dumper</b></td></tr><tr><td>File:</td><td><pre>%4</pre></td></tr><tr><td>Last&nbsp;modified:</td><td>%5</td></tr><tr><td>Size:</td><td>%6 Bytes</td></tr><tr><td colspan="2"><b>QML observer</b></td></tr><tr><td>File:</td><td><pre>%7</pre></td></tr><tr><td>Last&nbsp;modified:</td><td>%8</td></tr><tr><td>Size:</td><td>%9 Bytes</td></tr></table></body></html> - Tooltip showing the debugging helper library file. - <html><body><table><tr><td colspan="2"><b>Помощники отладчика GDB</b></td></tr><tr><td>Файл:</td><td><pre>%1</pre></td></tr><tr><td>Изменён:</td><td>%2</td></tr><tr><td>Размер:</td><td>%3 Байт(ов)</td></tr><tr><td colspan="2"><b>Загрузчик типов QML</b></td></tr><tr><td>Файл:</td><td><pre>%4</pre></td></tr><tr><td>Изменён:</td><td>%5</td></tr><tr><td>Размер:</td><td>%6 Байт(ов)</td></tr><tr><td colspan="2"><b>Обозреватель QML</b></td></tr><tr><td>Файл:</td><td><pre>%7</pre></td></tr><tr><td>Изменён:</td><td>%8</td></tr><tr><td>Размер:</td><td>%9 Байт(ов)</td></tr></table></body></html> + Helpers: None available + Помощники отсутствуют - This Qt Version has a unknown toolchain. - У этого профиля Qt неизвестный инструментарий. + <i>Not yet built.</i> + <i>Ещё не создан.</i> - Desktop - Qt Version is meant for the desktop - Настольный + <i>Not needed.</i> + <i>Не нужен.</i> - Symbian - Qt Version is meant for Symbian - Symbian - - - Maemo - Qt Version is meant for Maemo - Maemo - - - Qt Simulator - Qt Version is meant for Qt Simulator - Эмулятор Qt - - - unkown - No idea what this Qt Version is meant for! - неизвестная - - - Found Qt version %1, using mkspec %2 (%3) - Обнаружена Qt версии %1, -использующая mkspec %2 (%3) + <i>Cannot be compiled.</i> + <i>Собрать невозможно.</i> - Qt4ProjectManager::Internal::QtVersionManager + Qt4ProjectManager::Internal::QtQuickApp - + - + + The QML import path '%1' cannot be found. + Не удалось найти путь импорта QML «%1». - - - - + The QML module '%1' cannot be found. + Не удалось найти модуль QML «%1». - Name - Название + Invalid '%1' entry in '%2' of module '%3'. + Неверная «%1» запись в «%2» модуля «%3». - Debugging Helper - Помощник отладчика + No .pro file for plugin '%1' cannot be found. + Не удалось найти файл .pro для модуля «%1». - Show &Log - &Журнал + Could not write file '%1'. + Не удалось записать файл «%1». + + + + Qt4ProjectManager::Internal::QtQuickAppWizard + + Qt Quick Application + Приложение Qt Quick - &Rebuild - &Пересобрать + Creates a Qt Quick application project that can contain both QML and C++ code and includes a QDeclarativeView. + +You can build the application and deploy it on desktop and mobile target platforms. For example, you can create signed Symbian Installation System (SIS) packages for this type of projects. + Создание проекта приложения Qt Quick, который может содержать код как QML, так и на С++, а так же включает QDeclarativeView. + +Можно создать приложение и установить его на настольный компьютер и мобильные платформы. Например, можно создать подписанный пакет Symbian Installation System (SIS) для этого типа проектов. + + + + Qt4ProjectManager::Internal::QtQuickAppWizardDialog + + New Qt Quick Application + Новое приложение Qt Quick - S60 SDK: - SDK для S60: + This wizard generates a Qt Quick application project. + Этот мастер создаст проект приложения Qt Quick. - qmake Location - Размещение qmake + QML Sources + Исходники QML + + + Qt4ProjectManager::Internal::QtQuickAppWizardSourcesPage - Toolchain: - Инструментарий: + Select QML File + Выбор файла QML + + + Qt4ProjectManager::Internal::QtVersionInfo Version name: - Название версии: + Название профиля: qmake location: Размещение qmake: - MinGW directory: - Каталог MinGW: - - - CSL/GCCE directory: - Каталог CSL/GCCE: - - - Carbide directory: - Каталог Carbide: - - - Unable to detect MSVC version. - Не удалось определить версию MSVC. - - - Debugging helpers: - Помощники отладчика: + S60 SDK: + SDK для S60: SBS v2 directory: Каталог SBS v2: + + Qt4ProjectManager::Internal::QtVersionManager + + Name + Название + + + qmake Location + Размещение qmake + + + Add + Добавить + + + Remove + Удалить + + + + Qt4ProjectManager::Internal::RvctToolChainConfigWidget + + Form + + + + ARM &version: + &Версия ARM: + + + Version 5 + Версия 5 + + + Version 6 + Версия 6 + + + &Compiler path: + Путь к &компилятору: + + + Environment Variables + Переменные среды окружения + + + + Qt4ProjectManager::Internal::RvctToolChainFactory + + ARMv5 + + + + ARMv6 + + + + RVCT + + + + RVCT (%1 %2.%3 Build %4) + %1 arm version, %2 major version, %3 minor version, %4 build number + RVCT (%1 %2.%3 сборка %4) + + + + Qt4ProjectManager::Internal::S60CertificateInfo + + The certificate "%1" has already expired and cannot be used. +Expiration date: %2. + Срок действия сертификата «%1» уже истёк, поэтому он не может использоваться. +Он был действителен до: %2. + + + The certificate "%1" is not yet valid. +Valid from: %2. + Сертификат «%1» ещё не действует. +Срок действия начинается с %2. + + + The certificate "%1" is not a valid X.509 certificate. + «%1» не является корректным сертификатом X.509. + + + Type: + Тип: + + + Developer certificate + Сертификат разработчика + + + Self signed certificate + Самоподписанный сертификат + + + Issued by: + Запрошен: + + + Issued to: + Нужен для: + + + Valid from: + Действителен с: + + + Valid to: + Действителен по: + + + Capabilities: + Особенности: + + + Supporting %n device(s): + + Поддерживается %n устройство: + Поддерживается %n устройства: + Поддерживается %n устройств: + + + + + Qt4ProjectManager::Internal::S60CreatePackageParser + + The binary package '%1' was patched to be installable after being self-signed. +%2 +Use a developer certificate or any other signing option to prevent this patching from happening. + %1 package name, %2 will be replaced by a list of patching lines. + Двоичный пакет «%1» был изменён, чтобы была возможность его установки после самоподписывания. +%2 +Используйте сертификат разработчика или другой способ подписывания для предотвращения этого изменения. + + + Cannot create Smart Installer package as the Smart Installer's base file is missing. Please ensure that it is located in the SDK. + Не удалось создать пакет Smart Installer, так как отсутствует базовый файл. Убедитесь, что он имеется в SDK. + + Qt4ProjectManager::Internal::S60CreatePackageStep @@ -17027,30 +20000,74 @@ You can build the application and deploy it on desktop and mobile target platfor Could not find make command '%1' in the build environment - Не удалось найти в среде окружения сборки команду "%1" + Не удалось найти в среде окружения сборки команду «%1» + + + Ignore patching for this packaging step. + Пропускать внесение изменений на этом этапе создания пакета. The process "%1" exited normally. - Процесс "%1" завершился нормально. + Процесс «%1» завершился нормально. The process "%1" exited with code %2. - Процесс "%1" завершился с кодом %2. + Процесс «%1» завершился с кодом %2. The process "%1" crashed. - Процесс "%1" завершился крахом. + Процесс «%1» завершился крахом. Could not start process "%1" in %2 - Невозможно запустить процесс "%1" в %2 + Невозможно запустить процесс «%1» в %2 + + + Package Modified + Пакет изменён + + + <p>Qt modified your package <b>%1</b>.</p> + <p>Пакет <b>%1</b> был изменён Qt.</p> + + + Packages Modified + Пакеты изменены + + + <p>Qt modified some of your packages.</p> + <p>Некоторые пакеты были изменены Qt.</p> + + + %1<p><em>These changes were not part of your build system</em> but are required to make sure the <em>self-signed</em> package can be installed successfully on a device.</p><p>Check the Build Issues pane for more details on the modifications made.</p><p>Please see the <a href="%2">documentation</a> for other signing options which remove the need for this patching.</p> + %1<p><em>Эти изменения не являлись частью системы сборки</em>, но необходимы для успешной установки <em>самоподписанного</em> пакета на устройство.</p><p>В выводе сборки можно узнать, что за изменения были сделаны.</p><p>В <a href="%2">документации</a> описаны способы избавления от внесения этих изменений.</p> Starting: "%1" %2 in %3 - Запуск: "%1" %2 в %3 + Запуск: «%1» %2 в %3 + + No certificate file specified. Please specify one in the project settings. + Файл сертификата не задан. Его следует задать в настройках проекта. + + + Certificate file "%1" does not exist. Please specify an existing certificate file in the project settings. + Файл сертификата «%1» не существует. Следует задать существующий файл сертификата в настройках проекта. + + + No key file specified. Please specify one in the project settings. + Файл ключа не задан. Следует задать его в настройках проекта. + + + Key file "%1" does not exist. Please specify an existing key file in the project settings. + Файл ключа «%1» не существует. Следует задать существующий файл ключа в настройках проекта. + + + The package created will not install on a device as some of the defined capabilities are not supported by the certificate: %1 + Созданный пакет не установится на устройство, так как некоторые из заданных свойств не поддерживаются сертификатом: %1 + Qt4ProjectManager::Internal::S60CreatePackageStepConfigWidget @@ -17062,6 +20079,14 @@ You can build the application and deploy it on desktop and mobile target platfor Do you want to reset all passphrases saved for keys used? Желаете сбросить все сохранённые пароли для используемых ключей? + + signed with the certificate "%1" using the key "%2" + подписать сертификатом «%1» и ключём «%2» + + + signed with a certificate and a key that need to be specified + подписать сертификатом и ключём, которые нужно ещё указать + not signed не подписан @@ -17070,10 +20095,6 @@ You can build the application and deploy it on desktop and mobile target platfor self-signed самоподписанного - - signed with certificate %1 and key file %2 - подписанного сертификатом %1 и ключём %2 - <b>Create SIS Package:</b> %1, using Smart Installer <b>Создание пакета SIS:</b> %1, используя умный установщик @@ -17100,10 +20121,6 @@ You can build the application and deploy it on desktop and mobile target platfor Custom certificate: Особый сертификат: - - Choose certificate file (.cer) - Выбор файл сертификата (.cer) - Key file: Файл ключа: @@ -17124,6 +20141,14 @@ You can build the application and deploy it on desktop and mobile target platfor Not signed Не подписанный + + Choose certificate file + Выберите файл сертификата + + + Certificate's details + Свойства сертификата + Qt4ProjectManager::Internal::S60DeployConfiguration @@ -17142,6 +20167,10 @@ You can build the application and deploy it on desktop and mobile target platfor %1 on Symbian Device %1 на устройстве с Symbian + + Deploy to Symbian device + Установить на устройство Symbian + Qt4ProjectManager::Internal::S60DeployConfigurationWidget @@ -17153,6 +20182,22 @@ You can build the application and deploy it on desktop and mobile target platfor Silent installation Автоматическая установка + + Serial: + Последовательный: + + + TRK + + + + CODA + + + + <a href="qthelp://com.nokia.qtcreator/doc/creator-developing-symbian.html">What are the prerequisites?</a> + <a href="qthelp://com.nokia.qtcreator/doc/creator-developing-symbian.html">Зачем нужно?</a> + Installation file: Установочный файл: @@ -17166,27 +20211,111 @@ You can build the application and deploy it on desktop and mobile target platfor Устанавить на диск: - Device on serial port: - Последовательный порт устройства: + Connecting + Подключение + + + Unable to create CODA connection. Please try again. + Не удалось создать подключение CODA. Попробуйте ещё раз. + + + Currently there is no information about the device for this connection type. + Пока что отсутствует информация об устройстве для этого типа подключения. + + + No device information available + Информация об устройстве недоступна + + + Qt version: + Версия Qt: + + + Not installed on device + Не установлено на устройство + + + Qt version: + Версия Qt: + + + Unrecognised Symbian version 0x%1 + Версия Symbian 0x%1 не опознана + + + Unrecognised S60 version 0x%1 + Версия S60 0x%1 не опознана + + + OS version: + Версия ОС: + + + unknown + неизвестная + + + ROM version: + Версия ПЗУ: + + + Release: + Выпуск: + + + CODA version: + Версия CODA: + + + Error reading CODA version + Ошибка чтения версии CODA + + + QtMobility version: + Версия QtMobility: + + + Error reading QtMobility version + Ошибка чтения версии QtMobility + + + Screen size: + Размер экрана: + + + Communication Channel + Канал передачи данных Queries the device for information Запрашивает информацию у устройства - Connecting... - Подключение... + WLAN: + + + + Device Agent + Агент устройства + + + Serial port: + Последовательный порт: + + + Address: + Адрес: Qt4ProjectManager::Internal::S60DeployStep Unable to remove existing file '%1': %2 - Не удалось удалить существующий файл "%1": %2 + Не удалось удалить существующий файл «%1»: %2 Unable to rename file '%1' to '%2': %3 - Не удалось переименовать файл "%1" в "%2": %3 + Не удалось переименовать файл «%1» в «%2»: %3 Deploy @@ -17195,19 +20324,23 @@ You can build the application and deploy it on desktop and mobile target platfor Renaming new package '%1' to '%2' - Переименование нового пакета "%1" в %2" + Переименование нового пакета «%1» в «%2» Removing old package '%1' - Удаление старого пакета "%1" + Удаление старого пакета «%1» '%1': Package file not found - "%1": файл пакета не найден + «%1»: файл пакета не найден - There is no device plugged in. - Устройство не подключено. + No device is connected. Please connect a device and try again. + Устройство не подключено. Подключите устройство и попробуйте снова. + + + No address for a device has been defined. Please define an address and try again. + Адрес устройства не задан. Задайте его и попробуйте снова. Failed to find package %1 @@ -17215,22 +20348,42 @@ You can build the application and deploy it on desktop and mobile target platfor Deploying application to '%2'... - Установка приложения на "%2"... + Установка приложения на «%2»... Could not connect to phone on port '%1': %2 Check if the phone is connected and App TRK is running. - Не удалось подключиться к телефону через порт "%1": %2 + Не удалось подключиться к телефону через порт «%1»: %2 Убедитесь, что телефон подключён, и на нём работает App TRK. - Canceled. - Отменено. + Could not open serial device: %1 + Не удалось открыть последовательное устройство: %1 + + + Could not open remote file: %1 + Невозможно открыть внешний файл: %1 + + + Could not open local file %1: %2 + Не удалось открыть локальный файл «%1»: %2 + + + Installation failed: %1; see %2 for descriptions of the error codes + Не удалось установить: %1; описания кодов ошибок можно найти по ссылке %2 + + + Failed to close the remote file: %1 + Не удалось закрыть внешний файл: %1 Could not create file %1 on device: %2 Не удалось создать файл %1 на устройстве: %2 + + Copy progress: %1% + Ход копирования: %1% + Could not write to file %1 on device: %2 Не удалось записать в файл %1 на устройстве: %2 @@ -17245,23 +20398,55 @@ Check if the phone is connected and App TRK is running. Copying "%1"... - Копирование "%1"... + Копирование «%1»... + + + No package has been found. Please specify at least one installation package. + Не удалось найти пакет. Укажите как минимум один установочный пакет. + + + Deploying application to '%1'... + Установка приложения на «%1»... + + + No such port + Указанного порта нет + + + Connecting to %1:%2... + Подключение к %1: %2... + + + Error: %1 + Ошибка: %1 Installing package "%1" on drive %2:... - Установка пакета "%1" на диск %2:... + Установка пакета «%1» на диск %2:... + + + Please continue the installation on your device. + Продолжайте установку на устройство. Installation has finished Установка завершена + + Installation + Установка + Could not install from package %1 on device: %2 Не удалось установить из пакета %1 на устройстве: %2 + + Deployment has been cancelled. + Установка была отменена. + The device '%1' has been disconnected - Устройство "%1" было отключено + Устройство «%1» было отключено @@ -17280,17 +20465,17 @@ Check if the phone is connected and App TRK is running. Qt4ProjectManager::Internal::S60DeviceDebugRunControl + + Launching debugger... + Запускается отладчик... + Debugger for Symbian Platform Отладчик для платформы Symbian - Debugging - Отладка - - - Launching debugger... - Запускается отладчик... + Debug on Device + Отладить на устройстве Warning: Cannot locate the symbol file belonging to %1. @@ -17324,147 +20509,6 @@ Check if the phone is connected and App TRK is running. Параметры: - - Qt4ProjectManager::Internal::S60DeviceRunControl - - Could not start application: %1 - Не удалось запустить приложение: %1 - - - Starting application... - Запуск приложения... - - - Launching - Запуск - - - There is no device plugged in. - Устройство не подключено. - - - Executable file: %1 - Исполняемый файл: %1 - - - Debugger for Symbian Platform - Отладчик для платформы Symbian - - - Could not connect to phone on port '%1': %2 -Check if the phone is connected and App TRK is running. - Не удалось подключиться к телефону через порт "%1": %2 -Убедитесь, что телефон подключён, и на нём работает App TRK. - - - Could not connect to App TRK on device: %1. Restarting App TRK might help. - Не удалось подключиться к App TRK на устройстве: %1. Перезапуск App TRK может помочь. - - - Waiting for App TRK - Ожидание App TRK - - - Qt Creator is waiting for the TRK application to connect.<br>Please make sure the application is running on your mobile phone and the right port is configured in the project settings. - Qt Creator ожидает подключения приложение TRK.<br>Убедитесь, что приложение работает на мобильном телефоне, а в настройках проекта указан правильный порт. - - - Canceled. - Отменено. - - - The device '%1' has been disconnected - Устройство "%1" было отключено - - - Application running with pid %1. - Приложение выполняется с PID %1. - - - Finished. - Завершено. - - - - Qt4ProjectManager::Internal::S60Devices::Device - - Id: - Id: - - - Name: - Название: - - - EPOC: - EPOC: - - - Tools: - Инструментарий: - - - Qt: - Qt: - - - - Qt4ProjectManager::Internal::S60DevicesBaseWidget - - Default - По умолчанию - - - SDK Location - Размещение SDK - - - Qt Location - Размещение Qt - - - Choose Qt folder - Выбор каталога Qt - - - - Qt4ProjectManager::Internal::S60DevicesModel - - No Qt installed - Qt не установлена - - - - Qt4ProjectManager::Internal::S60DevicesPreferencePane - - Form - Форма - - - Refresh - Обновить - - - S60 SDKs - SDK для S60 - - - Error - Ошибка - - - Add - Добавить - - - Change Qt version - Сменить профиль Qt - - - Remove - Удалить - - Qt4ProjectManager::Internal::S60EmulatorRunConfiguration @@ -17513,15 +20557,214 @@ S60 emulator run configuration default display name, %1 is base pro-File nameQt4ProjectManager::Internal::S60Manager Run in Emulator - Выполнить на эмуляторе + Запустить на эмуляторе Run on Device - Выполнить на устройстве + Запустить на устройстве + + + + Qt4ProjectManager::Internal::S60PublisherOvi + + Error while reading .pro file %1: %2 + Ошибка чтения .pro файла %1: %2 - Debug on Device - Отладить на устройстве + Created %1 + + Создан %1 + + + + Sis file not created due to previous errors + + файл Sis не создан из-за ошибок + + + + Done! + + Готово! + + + + Sis file not created due to previous errors + + Файл Sis не создан из-за ошибок + + + + + Qt4ProjectManager::Internal::S60PublishingResultsPageOvi + + Open Containing Folder + Открыть папку файла + + + + Qt4ProjectManager::Internal::S60PublishingSisSettingsPageOvi + + %1 is a default vendor name used for testing and development. <br>The Vendor_Name field cannot contain the name 'Nokia'. <br>You are advised against using the default names 'Vendor' and 'Vendor-EN'. <br>You should also not leave the entry blank. <br>see <a href="http://www.forum.nokia.com/Distribute/Packaging_and_signing.xhtml">Packaging and Signing</a> for guidelines.<br> + %1 имя производителя по умолчанию, используемое при разработке и тестировании. <br>Поле Vendor_Name не может содержать имя «Nokia». <br>Не рекомендуется использовать стандартные имена «Vendor» и «Vendor-EN». <br>Не допустимо оставлять поле пустым. <br>см. справку по <a href="http://www.forum.nokia.com/Distribute/Packaging_and_signing.xhtml">Создание и подписывание пакетов</a>.<br> + + + %1 is a default vendor name used for testing and development. + %1 имя производителя по умолчанию, используемое при разработке и тестировании. + + + %1 are default vendor names used for testing and development. + Умолчальные имена производителей, используемые для разработки и тестирования: %1. + + + %1 <br>The Vendor_Name field cannot contain the name 'Nokia'. <br>You are advised against using the default names 'Vendor' and 'Vendor-EN'. <br>You should also not leave the entry blank. <br>See <a href="http://www.forum.nokia.com/Distribute/Packaging_and_signing.xhtml">Packaging and Signing</a> for guidelines.<br> + %1 <br>Поле Vendor_Name не может содержать имя «Nokia». <br>Не рекомендуется использовать стандартные имена «Vendor» и «Vendor-EN». <br>Не допустимо оставлять поле пустым. <br>см. справку по <a href="http://www.forum.nokia.com/Distribute/Packaging_and_signing.xhtml">Создание и подписывание пакетов</a>.<br> + + + The application UID %1 is only for testing and development.<br>SIS packages built with it cannot be distributed via the Ovi Store.<br> + UID приложения %1 только для разработки и тестирования.<br>Пакеты SIS, собранные с его помощью, не могут распространяться через Ovi Store.<br> + + + The application UID %1 is a symbiansigned.com UID. <br>Applications with this UID will be rejected by Application Signing Services for Ovi Store.<br>If you want to continue with a symbiansigned.com UID, sign your application on symbiansigned.com and upload the signed application to Publish to Ovi.<br> + UID приложения %1 принадлежит symbiansigned.com. <br>Приложения с этим UID будут отклонены сервисом подписывания приложений Ovi Store. <br>Если хотите продолжить использовать UID от symbiansigned.com, то следует подписать приложение на этом сервисе и загрузить для публикации на Ovi.<br> + + + The application UID %1 is not an acceptable UID.<br>SIS packages built with it cannot be signed by Application Signing Services for Ovi Store.<br> + UID приложения %1 недопустим. <br>Приложения с этим UID будут отклонены сервисом подписывания приложений Ovi Store.<br> + + + The application UID is a global unique indentifier of the SIS package.<br> + UID приложения - это глобальный уникальный идентификатор пакета SIS.<br> + + + To get a unique application UID for your package file,<br>please register at <a href="http://info.publish.ovi.com/">publish.ovi.com</a> + Для получения уникального UID приложения для файла пакета,<br>следует зарегистрироваться на <a href="http://info.publish.ovi.com/">publish.ovi.com</a> + + + %1 need(s) to be certified signed. Please go to <a href="symbiansigned.com">symbiansigned.com</a> for guidance. + Для %1 требуется подпись. Зайдите на <a href="symbiansigned.com">symbiansigned.com</a> за руководством. + + + <br>%1 need(s) manufacturer approval.<br> + <br>Для %1 требуется одобрение производителя.<br> + + + Some capabilities might require a special kind of signing or approval from the manufacturer.<br> + Некоторые особенности могут требовать специального вида подписи или одобрения производителя.<br> + + + Please verify that you have a released version of Qt. <br><a href="http://wiki.forum.nokia.com/index.php/Nokia_Smart_Installer_for_Symbian">Qt Packages Distributed by Smart Installer</a> has a list of released Qt versions. + Убедитесь, что используется официально выпущенная версия Qt.<br><a href="http://wiki.forum.nokia.com/index.php/Nokia_Smart_Installer_for_Symbian">Пакеты Qt распространяемые через Smart Installer</a> содержит список выпущенных версий Qt. + + + + Qt4ProjectManager::Internal::S60PublishingWizardFactoryOvi + + Publish Qt Symbian Applications to Ovi Store + Публикация приложений Qt Symbian в Ovi Store + + + This wizard checks your project file to make sure it complies with Ovi Store submission criteria. + +The wizard creates SIS files that can be submitted to Publish to Ovi. + +You cannot use it if you use application UIDs from Symbian Signed. + +You cannot use it for the Certified Signed and Manufacturer level capabilities: +NetworkControl, MultimediaDD, CommDD, DiskAdmin, AllFiles, DRM and TCB. + +Your application will also be rejected by Ovi QA if you choose an unreleased Qt version on the next page. + Этот мастер проверяет файл проекта на соответствие критериям принятия в Ovi Store. + +Этот мастер создаёт файлы SIS, которые могут быть представлены для размещения в Ovi. + +Его нельзя использовать, если используются UID'ы приложения подписанные для Symbian. + +Его нельзя использовать для подписанных и особенностей уровня производителя: +NetworkControl, MultimediaDD, CommDD, DiskAdmin, AllFiles, DRM and TCB. + +Приложение будет отклонено Ovi QA, если будет выбрана невыпущенная версия Qt на следующей странице. + + + + Qt4ProjectManager::Internal::S60PublishingWizardOvi + + Publishing to Ovi Store + Размещение на Ovi Store + + + Build Configuration + Конфигурация сборки + + + Project File Checks + Проверки файла проекта + + + Creating an Uploadable SIS File + Создание загружаемого файла SIS + + + + Qt4ProjectManager::Internal::S60RunControlBase + + Launching + Запуск + + + Please finalise the installation on your device. + Завершите установку на устройство. + + + <html><head/><body><center><i>%1</i> is still running on the device.</center><center>Terminating it can leave the target in an inconsistent state.</center><center>Would you still like to terminate it?</center></body></html> + <html><head/><body><center><i>%1</i> ещё выполняется на устройстве.</center><center>Завершение оставит цель в неопределённом состоянии.</center><center>Желаете завершить?</center></body></html> + + + Application Still Running + Приложение ещё выполняется + + + Force Quit + Завершить + + + Keep Running + Продолжить выполнение + + + Finished. + Завершено. + + + + Qt4ProjectManager::Internal::SubdirsProjectWizard + + Subdirs Project + Проект с поддиректориями + + + Creates a qmake-based subdirs project. This allows you to group your projects in a tree structure. + Создание проекта с поддиректориями на основе qmake. Он позволит организовать проект в виде дерева каталогов. + + + Done && Add Subproject + Готово и добавить подпроект + + + Finish && Add Subproject + Завершить и добавить подпроект + + + New Subproject + Title of dialog + Создание подпроекта + + + + Qt4ProjectManager::Internal::SubdirsProjectWizardDialog + + This wizard generates a Qt4 subdirs project. Add subprojects to it later on by using the other wizards. + Этот мастер создаёт проект Qt4 с подкаталогами. Добавьте подпроекты в него позже с использованием уже других мастеров. @@ -17541,111 +20784,13 @@ S60 emulator run configuration default display name, %1 is base pro-File nameQt Creator can set up the following targets: Qt Creator может настроить следующие цели: - - Qt Version - Профиль Qt - - - Status - Состояние - - - No builds found - Сборки не найдены - - - No builds for project file "%1" were found in the folder "%2". - %1: pro-file, %2: directory that was checked. - Сборки для файла проекта "%1" не были найдены в каталоге "%2". - - - Check All - Включить всё - - - Check all Qt versions - Включить все профили Qt - - - Check only this version - Включить только этот профиль - - - Check all versions - Включить все профили - - - Uncheck all versions - Отключить все профили - - - <b>Error:</b> - Severity is Task::Error - <b>Ошибка:</b> - - - <b>Warning:</b> - Severity is Task::Warning - <b>Предупреждение:</b> - - - debug and release - We are going to build debug and release - отладка и релиз - - - debug - Debug build - отладка - - - release - release build - релиз - - - <br>using %1 (%2) - %1: qmake used (incl. full path), %2: "debug", "release" or "debug and release" - <br>используется %1 (%2) - - - Import - Is this an import of an existing build or a new one? - Импортируемая - - - New - Is this an import of an existing build or a new one? - Новая - - - Choose a directory to scan for additional shadow builds - Выбор директории для поиска дополнительных теневых сборок - - - Qt Creator can set up the following targets for<br>project <b>%1</b>: - %1: Project name - Qt Creator позволяет настроить следующие цели для<br>проекта <b>%1</b>: - Setup targets for your project Настройте цели вашего проекта - Build Directory - Каталог сборки - - - Import Existing Shadow Build... - Импорт каталога теневой сборки... - - - Uncheck all Qt versions - Отключить все профили - - - Uncheck All - Отключить всё + <b>No valid qt versions found.</b><br> Please add a qt version in Tools/Options or via the maintenance tool of the SDK. + <b>Подходящие профили Qt не найдены.</b><br>Добавьте профиль в Инструменты/Параметры или.через инструмент обслуживания SDK. @@ -17721,6 +20866,85 @@ S60 emulator run configuration default display name, %1 is base pro-File nameИнформация о тестовом классе + + Qt4ProjectManager::Internal::TrkRunControl + + No device is connected. Please connect a device and try again. + Устройство не подключено. Подключите устройство и попробуйте снова. + + + Executable file: %1 + Исполняемый файл: %1 + + + Could not connect to phone on port '%1': %2 +Check if the phone is connected and App TRK is running. + Не удалось подключиться к телефону через порт «%1»: %2 +Убедитесь, что телефон подключён, и на нём работает App TRK. + + + Could not connect to App TRK on device: %1. Restarting App TRK might help. + Не удалось подключиться к App TRK на устройстве: %1. Перезапуск App TRK может помочь. + + + Waiting for App TRK + Ожидание App TRK + + + Qt Creator is waiting for the TRK application to connect on %1.<br>Please make sure the application is running on your mobile phone and the right port is configured in the project settings. + Qt Creator ожидает подключения приложения TRK на %1.<br>Убедитесь, что приложение работает на мобильном телефоне, а в настройках проекта указан правильный порт. + + + Canceled. + Отменено. + + + The device '%1' has been disconnected + Устройство «%1» было отключено + + + Starting application... + Запуск приложения... + + + Application running with pid %1. + Приложение выполняется с PID %1. + + + Could not start application: %1 + Не удалось запустить приложение: %1 + + + + Qt4ProjectManager::Internal::WinscwToolChainConfigWidget + + Dialog + + + + Compiler path: + Путь к компилятору: + + + System include path: + Системный каталог заголовочных файлов: + + + System library path: + Системный каталог библиотечных файлов: + + + + Qt4ProjectManager::Internal::WinscwToolChainFactory + + WINSCW + + + + WINSCW from Qt version + WINSCW из профиля Qt + + Qt4ProjectManager::MakeStep @@ -17729,8 +20953,16 @@ S60 emulator run configuration default display name, %1 is base pro-File nameСборка - Could not find make command: %1 in the build environment - Не удалось найти в среде окружения сборки команду: %1 + Qt Creator needs a tool chain set up to build. Please configure a tool chain in Project mode. + Необходимо задать инструментарий для сборки. Настройте его в режиме проекта. + + + Makefile not found. Please check your build settings + Не найден Makefile. Проверьте настройки сборки + + + Configuration is faulty, please check the Build Issues view for details. + Конфигурация неисправна. Окно «Сообщения сборки» содержит подробную информацию. @@ -17739,10 +20971,6 @@ S60 emulator run configuration default display name, %1 is base pro-File name<b>Make:</b> %1 not found in the environment. <b>Сборка:</b>программа %1 не найдена. - - <b>Make:</b> %1 %2 in %3 - <b>Make:</b> %1 %2 в %3 - Override %1: Заменить %1: @@ -17759,7 +20987,7 @@ S60 emulator run configuration default display name, %1 is base pro-File nameСохранить ключевую фразу - This is an insecure option. The password will be saved as a plain text. + This is an insecure option. The password will be saved as plain text. Этот параметр небезопасен, так как пароль будет сохранён в виде простого текста. @@ -17776,15 +21004,31 @@ S60 emulator run configuration default display name, %1 is base pro-File name Configuration is faulty, please check the Build Issues view for details. - Конфигурация неисправна. Окно "Сообщения сборки" содержит подробную информацию. + Конфигурация неисправна. Окно «Сообщения сборки» содержит подробную информацию. Configuration unchanged, skipping qmake step. Настройки не изменились, этап qmake пропускается. + + Invalid Qt version. + Некорректный профиль Qt. + + + Requires Qt 4.7.1 or newer. + Требуется Qt версии не ниже 4.7.1. + + + Library not available. <a href='compile'>Compile...</a> + Библиотека отсутствует. <a href='compile'>Собрать...</a> + Qt4ProjectManager::QMakeStepConfigWidget + + Building helpers + Сборка помощников + <b>qmake:</b> No Qt version set. Cannot run qmake. <b>qmake:</b> Профиль Qt не выбран. Невозможно запустить qmake. @@ -17794,6 +21038,27 @@ S60 emulator run configuration default display name, %1 is base pro-File name<b>qmake:</b> %1 %2 + + Qt4ProjectManager::QmlDebuggingLibrary + + QML Debugging + Отладка QML + + + The target directory %1 could not be created. + Не удалось создать целевой каталог %1. + + + QML Debugging library could not be built in any of the directories: +- %1 + +Reason: %2 + Не удалось создать библиотеку отладки QML ни в одном из каталогов: +- %1 + +Причина: %2 + + Qt4ProjectManager::QmlDumpTool @@ -17808,15 +21073,95 @@ S60 emulator run configuration default display name, %1 is base pro-File name + + Qt4ProjectManager::Qt4BaseTargetFactory + + %1 Debug + Name of a debug build configuration to created by a project wizard, %1 being the Qt version name. We recommend not translating it. + %1 Отладка + + + %1 Release + Name of a release build configuration to created by a project wizard, %1 being the Qt version name. We recommend not translating it. + %1 Релиз + + + + Qt4ProjectManager::Qt4DefaultTargetSetupWidget + + Add build from: + Добавить сборку из: + + + Add Build + Добавить сборку + + + Use Shadow Building + Использовать теневую сборку + + + debug + Debug build + отладка + + + release + release build + релиз + + + No build found + Сборка не найдена + + + No Build found in %1 matching project %2. + В %1 сборка соответствующая проекту %2 не найдена. + + + Incompatible build found + Найдена несовместимая сборка + + + The Build found in %1 is incompatible with this target + Сборка, найденная в %1, несовместима с этой целью + + + Import build from %1 + Импортировать сборку из %1 + + + <b>Error:</b> + Severity is Task::Error + <b>Ошибка:</b> + + + <b>Warning:</b> + Severity is Task::Warning + <b>Предупреждение:</b> + + Qt4ProjectManager::Qt4Manager + + Full path to the bin/ install directory of the current project's Qt version. + Полный путь к каталогу bin/ профиля Qt, используемого в текущем проекте. + + + Update of Generated Files + Обновление созданных файлов + + + The following files are either outdated or have been modified:<br><br>%1<br><br>Do you want Qt Creator to update the files? Any changes will be lost. + Следующие файлы устарели или были изменены:<br><br>%1<br><br>Желаете, чтобы Qt Creator обновил их? При этом все изменения будут потеряны. + Failed opening project '%1': Project file does not exist - Не удалось открыть проект '%1': файл проекта отсутствует + Не удалось открыть проект «%1»: файл проекта отсутствует Failed opening project '%1': Project already open - Не удалось открыть проект '%1': проект уже открыт + Не удалось открыть проект «%1»: проект уже открыт @@ -17826,6 +21171,44 @@ S60 emulator run configuration default display name, %1 is base pro-File nameВычисление + + Qt4ProjectManager::Qt4Target + + Desktop + Qt4 Desktop target display name + + + + Qt Simulator + Qt4 Simulator target display name + Эмулятор Qt + + + Maemo5 + Qt4 Maemo5 target display name + + + + Harmattan + Qt4 Harmattan target display name + + + + Meego + Qt4 Meego target display name + + + + Symbian Emulator + Qt4 Symbian Emulator target display name + Эмулятор Symbian + + + Symbian Device + Qt4 Symbian Device target display name + Устройство Symbian + + Qt4ProjectManager::QtVersion @@ -17836,7 +21219,7 @@ S60 emulator run configuration default display name, %1 is base pro-File name The qmake command "%1" was not found or is not executable. %1: Path to qmake executable - Не удалось найти программу qmake "%1" или она неисполняема. + Не удалось найти программу qmake «%1» или она неисполняема. Qmake does not support build directories below the source directory. @@ -17846,13 +21229,13 @@ S60 emulator run configuration default display name, %1 is base pro-File nameThe build directory needs to be at the same level as the source directory. Каталог сборки должен быть на том же уровне, что и каталог исходников. - - Warning: Cannot build QMLObserver; Qt version must be 4.7.1 or higher. - Внимание: Невозможно собрать QMLObserver; версия Qt должна быть не ниже 4.7.1. - Qt4ProjectManager::QtVersionManager + + MinGW from %1 + MinGW из %1 + <not found> <не найдена> @@ -17865,6 +21248,14 @@ S60 emulator run configuration default display name, %1 is base pro-File nameName: Название: + + Invalid Qt version + Неверный профиль Qt + + + ABI: + + Source: Исходники: @@ -17885,10 +21276,6 @@ S60 emulator run configuration default display name, %1 is base pro-File nameVersion: Версия: - - Debugging helper: - Помощник отладчика: - Qt4ProjectManager::SbsV2Parser @@ -17898,7 +21285,7 @@ S60 emulator run configuration default display name, %1 is base pro-File name The file '%1' is not a SBSv2 log file. - Файл "%1" не является журналом SBSv2. + Файл «%1» не является журналом SBSv2. Running command: %1 @@ -17912,6 +21299,18 @@ S60 emulator run configuration default display name, %1 is base pro-File nameОшибка на этапе %1, код завершения %2. + + Qt4ProjectManager::TargetSetupPage + + Target Setup + Настройка цели + + + Qt Creator can set up the following targets for project <b>%1</b>: + %1: Project name + Qt Creator позволяет настроить следующие цели для проекта <b>%1</b>: + + QtDumperHelper @@ -17931,329 +21330,6 @@ S60 emulator run configuration default display name, %1 is base pro-File name<нет> - - QtGradientDialog - - Edit Gradient - Правка градиента - - - - QtGradientEditor - - Start X - X начала - - - Start Y - Y начала - - - Final X - X конца - - - Final Y - Y конца - - - Central X - X центра - - - Central Y - Y центра - - - Focal X - X фокуса - - - Focal Y - Y фокуса - - - Radius - Радиус - - - Angle - Угол - - - Linear - Линейный - - - Radial - Радиальный - - - Conical - Конический - - - Pad - Равномерная - - - Repeat - Цикличная - - - Reflect - Зеркальная - - - Form - Форма - - - Gradient Editor - Редактор градиента - - - This area shows a preview of the gradient being edited. It also allows you to edit parameters specific to the gradient's type such as start and final point, radius, etc. by drag & drop. - Эта область отображает предварительный вариант настраиваемого градиента. Также она позволяет менять с помощью перетаскивания характерные для градиента параметры, такие как: начальная и конечная точки, радиус и пр. - - - 1 - 1 - - - 2 - 2 - - - 3 - 3 - - - 4 - 4 - - - 5 - 5 - - - Gradient Stops Editor - Редактор опорных точек градиента - - - This area allows you to edit gradient stops. Double click on the existing stop handle to duplicate it. Double click outside of the existing stop handles to create a new stop. Drag & drop the handle to reposition it. Use right mouse button to popup context menu with extra actions. - Эта область позволяет редактировать опорные точки градиента. Двойной щелчок на существующей точке создаст её копию. Двойной клик вне существующей точки создаст новую. Точки можно перемещать путем удерживания левой кнопки. По правой кнопке можно получить контекстное меню дополнительных действий. - - - Zoom - Масштаб - - - Reset Zoom - 100% - - - Position - Положение - - - Hue - Оттенок - - - H - H - - - Saturation - Насыщенность - - - S - S - - - Sat - Насыщение - - - Value - Значение - - - V - V - - - Val - Значение - - - Alpha - Альфа - - - A - A - - - Type - Тип - - - Spread - Заливка - - - Color - Цвет - - - Current stop's color - Цвет текущей точки - - - Show HSV specification - Настройки в виде HSV - - - HSV - HSV - - - Show RGB specification - Настройки в виде RGB - - - RGB - RGB - - - Current stop's position - Положение текущей точки - - - % - % - - - Zoom In - Увеличить - - - Zoom Out - Уменьшить - - - Toggle details extension - Показать/скрыть детальные настройки - - - > - > - - - Linear Type - Линейный тип - - - ... - ... - - - Radial Type - Радиальный тип - - - Conical Type - Конический тип - - - Pad Spread - Равномерная заливка - - - Repeat Spread - Цикличная заливка - - - Reflect Spread - Зеркальная заливка - - - - QtGradientStopsWidget - - New Stop - Новая точка - - - Delete - Удалить - - - Flip All - Отобразить зеркально - - - Select All - Выделить все - - - Zoom In - Увеличить - - - Zoom Out - Уменьшить - - - Reset Zoom - Сбросить масштаб - - - - QtGradientView - - Grad - Градиент - - - Remove Gradient - Удалить градиент - - - Are you sure you want to remove the selected gradient? - Вы действительно желаете удалить выбранный градиент? - - - New... - Новый... - - - Edit... - Правка... - - - Rename - Переименовать - - - Remove - Удалить - - - Gradient View - Просмотр градиента - - - - QtGradientViewDialog - - Select Gradient - Выбрать градиент - - QtModulesInfo @@ -18321,12 +21397,39 @@ S60 emulator run configuration default display name, %1 is base pro-File nameКлассы для межпроцессного взаимодействия с использованием D-Bus + + QtQuickAppWizardSourcesPage + + WizardPage + + + + Main QML File + Основной файл QML + + + Import an existing .qml file + Импортировать существующий файл .qml + + + Generate a main.qml file + Создать файл main.qml + + + Note: All files and directories that reside in the same directory as the main QML file are deployed. You can modify the contents of the directory any time before deploying. + Все файлы и подкаталоги, находящиеся в том же каталоге, что и основной файл QML, будут установлены. В любое время можно изменить содержимое этого каталога перед установкой. + + QtVersion No qmake path set Путь к qmake не указан + + qmake does not exist or is not executable + qmake отсутствует или не запускается + Qt version has no name Профиль Qt не имеет названия @@ -18340,11 +21443,62 @@ S60 emulator run configuration default display name, %1 is base pro-File nameНе удалось определить путь к утилитам Qt. Может путь к qmake неверен? - Cannot determine the installation path for Qt version '%1'. - Невозможно определить путь, куда установлена Qt из профиля "%1". + The default mkspec symlink is broken. + Умолчальная символьная ссылка на mkspec повреждена. - The Qt Version has no toolchain. + Failed to detect the ABI(s) used by the Qt version. + Не удалось определить ABI, используемый профилем Qt. + + + The "Open C/C++ plugin" is not installed in the Symbian SDK or the Symbian SDK path is misconfigured + Путь к Symbian SDK неверен или в него не установлен «Open C/C++ plugin» + + + Desktop + Qt Version is meant for the desktop + + + + Symbian + Qt Version is meant for Symbian + + + + Maemo + Qt Version is meant for Maemo5 + + + + Harmattan + Qt Version is meant for Harmattan + + + + Meego + Qt Version is meant for Meego + + + + Qt Simulator + Qt Version is meant for Qt Simulator + + + + unkown + No idea what this Qt Version is meant for! + неизвестной + + + Qt version %1, using mkspec %2 (%3) + Qt версии %1, использующая mkspec %2 (%3) + + + Cannot determine the installation path for Qt version '%1'. + Невозможно определить путь, куда установлена Qt из профиля «%1». + + + The Qt Version has no tool chain. У профиля Qt нет инструментария. @@ -18389,8 +21543,8 @@ S60 emulator run configuration default display name, %1 is base pro-File name ResourceEditor::Internal::ResourceEditorPlugin - Creates a Qt Resource file (.qrc) that you can add to a Qt C++ project. - Создание файла ресурсов Qt (.qrc) для добавления в проект Qt C++. + Creates a Qt Resource file (.qrc) that you can add to a Qt Widget Project. + Создание файла ресурсов Qt (.qrc) для добавления в проект Qt Widget. Qt Resource file @@ -18426,6 +21580,84 @@ S60 emulator run configuration default display name, %1 is base pro-File nameНастройки запуска + + S60CertificateDetailsDialog + + Details of Certificate + Свойства сертификата + + + + S60PublishingBuildSettingsPageOvi + + Form + + + + Choose a build configuration: + Выберите конфигурацию сборки: + + + Only Qt versions above 4.6.3 are made available in this wizard. +Previous Qt versions have limitations in building suitable SIS files. + В данном мастере доступны только версии Qt 4.6.3 и выше. +Предыдущие имеют ограничения в создании годных файлов SIS. + + + + S60PublishingResultsPageOvi + + Form + + + + + S60PublishingSisSettingsPageOvi + + Form + + + + Global vendor name: + Глобальное имя производителя: + + + Qt version used in builds: + Профиль Qt используемый при сборке: + + + Current Qt Version + Текущий профиль Qt + + + Application UID: + UID приложения: + + + Current UID3 + Текущий UID3 + + + Capabilities: + Возможности: + + + Current set of capabilities + Текущий набор возможностей + + + Current Global Vendor Name + Текущее глобальное имя + + + Localised vendor names: + Локализованные имена производителей: + + + Localised Vendor Names + Локализованные имена производителей + + SaveItemsDialog @@ -18560,6 +21792,37 @@ S60 emulator run configuration default display name, %1 is base pro-File nameЖурнал сборки помощника отладчика + + SnippetsSettingsPage + + Form + + + + Group: + Группа: + + + Add + Добавить + + + Remove + Удалить + + + Revert Built-in + Откатить встроенное + + + Restore Removed Built-ins + Восстановить удалённое + + + Reset All + Сбросить всё + + SshConnection @@ -18576,6 +21839,33 @@ Server list was %2. Ошибка создания ключа: %1 + + StackHandler + + Address: + Адрес: + + + Function: + Функция: + + + File: + Файл: + + + Line: + Строка: + + + From: + Из: + + + To: + В: + + StandardTextColorGroupBox @@ -18613,14 +21903,6 @@ Server list was %2. - - Aliasing - Сглаживание - - - Smooth - Использовать - Alignment Выравнивание @@ -18633,20 +21915,24 @@ Server list was %2. Запуск отладчика - Executable: - Программа: + &Executable: + &Программа: - Arguments: - Параметры: + &Arguments: + П&араметры: - Break at 'main': - Останов на 'main': + &Working directory: + &Рабочий каталог: - Working directory: - Рабочий каталог: + Break at '&main': + Останов на «&main»: + + + &Tool chain: + &Инструментарий: @@ -18656,32 +21942,63 @@ Server list was %2. Запуск отладчика - Host and port: - Хост и порт: + &Debugger: + &Отладчик: - Architecture: - Архитектура: + Local &executable: + &Локальная программа: - Use server start script: - Использовать скрипт: + &Host and port: + &Хост и порт: - Server start script: - Скрипт запуска сервера: + &Architecture: + &Архитектура: - Debugger: - Отладчик: + Sys&root: + &Системный корень: - Local executable: - Локальная программа: + &Use server start script: + &Использовать скрипт: - Sysroot: - Системный корень: + &GNU target: + &Цель GNU: + + + &Server start script: + Скрипт &запуска сервера: + + + + StartRemoteEngineDialog + + Start Remote Engine + Запустить внешний отладчик + + + &Host: + &Хост: + + + &Username: + &Пользователь: + + + &Password: + П&ароль: + + + &Engine path: + П&уть к отладчику: + + + &Inferior path: + Путь к п&рограмме: @@ -18772,7 +22089,7 @@ Server list was %2. Subversion::Internal::SubversionEditor Annotate revision "%1" - Аннотация ревизии "%1" + Аннотация ревизии «%1» @@ -18787,7 +22104,7 @@ Server list was %2. Add "%1" - Добавить "%1" + Добавить «%1» Alt+S,Alt+A @@ -18803,7 +22120,7 @@ Server list was %2. Diff "%1" - Сравнить "%1" + Сравнить «%1» Alt+S,Alt+D @@ -18819,7 +22136,7 @@ Server list was %2. Commit "%1" - Фиксировать "%1" + Фиксировать «%1» Alt+S,Alt+C @@ -18831,7 +22148,7 @@ Server list was %2. Filelog "%1" - История "%1" + История «%1» Annotate Current File @@ -18839,7 +22156,7 @@ Server list was %2. Annotate "%1" - Аннотация "%1" (annotate) + Аннотация «%1» (annotate) Commit Project @@ -18847,7 +22164,7 @@ Server list was %2. Commit Project "%1" - Фиксировать проект "%1" + Фиксировать проект «%1» Diff Repository @@ -18879,7 +22196,7 @@ Server list was %2. Delete "%1"... - Удалить "%1"... + Удалить «%1»... Revert... @@ -18887,19 +22204,19 @@ Server list was %2. Revert "%1"... - Откатить "%1"... + Откатить «%1»... Diff Project "%1" - Сравнить проект "%1" + Сравнить проект «%1» Status of Project "%1" - Состояние проекта "%1" + Состояние проекта «%1» Log Project "%1" - История проекта "%1" + История проекта «%1» Log Project @@ -18911,7 +22228,7 @@ Server list was %2. Update Project "%1" - Обновить проект "%1" + Обновить проект «%1» Revert Repository... @@ -18993,6 +22310,21 @@ Server list was %2. Фиксация Subversion + + SuppressionDialog + + Dialog + + + + Suppression File: + Файл с игнорируемым списком: + + + Suppression: + Игнорируется: + + Switches @@ -19017,10 +22349,62 @@ Server list was %2. - SymbolGroup + SymbianUtils::VirtualSerialDevice - Out of scope - Вне области + Port not found + Порт не найден + + + Port in use + Порт используется + + + Timed out + Время истекло + + + Port unreachable + Порт недоступен + + + The port %1 could not be opened: %2 + Не удалось открыть порт %1: %2 + + + An error occurred while waiting for read notifications from %1: %2 + Возникла ошибка при ожидании уведомления о чтении от %1: %2 + + + An error occurred while reading from %1: %2 + Возникла ошибка при чтении из %1: %2 + + + An error occurred while writing to %1: %2 + Возникла ошибка при записи в %1: %2 + + + An error occurred while syncing on waitForBytesWritten for %1: %2 + Возникла ошибка при синхронизации (waitForBytesWritten) с %1: %2 + + + The port %1 could not be opened: %2 (POSIX error %3) + Не удалось открыть порт %1: %2 (ошибка POSIX %3) + + + Unable to retrieve terminal settings of port %1: %2 (POSIX error %3) + Не удалось получить настройки терминала для порта %1: %2 (ошибка POSIX %3) + + + Unable to apply terminal settings to port %1: %2 (POSIX error %3) + Не удалось применить настройки терминала к порту %1: %2 (ошибка POSIX %3) + + + Cannot write to port %1: %2 (POSIX error %3) + Не удалось записать в порт %1: %2 (ошибка POSIX %3) + + + The function select() returned an error on port %1: %2 (POSIX error %3) + Функция select() возвратила ошибку для порта %1: %2 (ошибка POSIX %3) @@ -19092,12 +22476,23 @@ Server list was %2. безымянный - <em>Binary data</em> - <em>Бинарные данные</em> + Opening file + Открытие файла TextEditor::BaseTextEditor + + Line: %1, Col: %2 + Строка: %1, Столбец: %2 + + + Line: 9999, Col: 999 + Строка: 9999, Столбец: 999 + + + + TextEditor::BaseTextEditorWidget CTRL+D @@ -19108,7 +22503,7 @@ Server list was %2. <b>Error:</b> Could not decode "%1" with "%2"-encoding. Editing not possible. - <b>Ошибка:</b> Не удалось преобразовать "%1" в кодировку "%2". Редактирование невозможно. + <b>Ошибка:</b> Не удалось преобразовать «%1» в кодировку «%2». Редактирование невозможно. Select Encoding @@ -19119,282 +22514,6 @@ Server list was %2. Текст слишком большой для отображения (%1 МБ). - - TextEditor::BaseTextEditorEditable - - Line: %1, Col: %2 - Строка: %1, Столбец: %2 - - - Line: %1, Col: 999 - Строка: %1, Столбец: 999 - - - - TextEditor::BehaviorSettingsPage - - Tab key performs auto-indent: - Автоотступ по клавише TAB: - - - Never - Никогда - - - Always - Всегда - - - Storage - Сохранение - - - Removes trailing whitespace on saving. - Удалять завершающие пробелы при сохранении. - - - &Clean whitespace - &Очищать пробелы - - - Clean whitespace in entire document instead of only for changed parts. - Очищать пробелы во всём документе, а не только в изменившихся частях. - - - In entire &document - &Во всём документе - - - Correct leading whitespace according to tab settings. - Исправлять отступы вначале в соответствии с настройками табуляции. - - - Clean indentation - Очищать отступы - - - &Ensure newline at end of file - О&беспечивать пустую строку в конце файла - - - Tabs and Indentation - Табуляция и отступы - - - Ta&b size: - Размер &табуляции: - - - &Indent size: - Размер отст&упа: - - - Backspace will go back one indentation level instead of one space. - Забой перемещает на позицию, а не на пробел назад. - - - &Backspace follows indentation - &Забой следует отступам - - - Insert &spaces instead of tabs - &Пробелы вместо табов - - - Enable automatic &indentation - &Автоотступы - - - Mouse - Мышь - - - Enable &mouse navigation - Включить навигацию &мышью - - - Enable scroll &wheel zooming - Включить масштабирование &колёсиком - - - Automatically determine based on the nearest indented line (previous line preferred over next line) - Определять автоматически на основе соседних строк с отступами (предыдущая строка имеет приоритет перед следующей) - - - Based on the surrounding lines - На основе соседних строк - - - Block indentation style: - Стиль отступа блоков: - - - Exclude Braces - Без скобок - - - Include Braces - Включая скобки - - - GNU Style - Стиль GNU - - - In Leading White Space - Перед текстом - - - <html><head/><body> -Controls the indentation style of curly brace blocks. - -<ul> -<li>Exclude Braces: The braces are not indented. -<pre> -void foo() -{ - if (a) - { - bar(); - } -} -</pre> -</li> - -<li>Include Braces: The braces are indented. The contents of the block are on the same level as the braces. -<pre> -void foo() - { - if (a) - { - bar(); - } - } -</pre> -</li> - -<li>GNU Style: Indent the braces for blocks in statements. The contents are indented twice. -<pre> -void foo() -{ - if (a) - { - bar(); - } -} -</pre> -</li> -</ul></body></html> - <html><head/><body> -Управляет стилем отступов блоков в фигурных скобоках. - -<ul> -<li>Без скобок: скобки не сдвигаются. -<pre> -void foo() -{ - if (a) - { - bar(); - } -} -</pre> -</li> - -<li>Включая скобки: скобки сдвигаются, а содержимое блока на уровне скобок. -<pre> -void foo() - { - if (a) - { - bar(); - } - } -</pre> -</li> - -<li>Стиль GNU: скобки сдвигаются на размер оператора, а содержимое блока сдвигается дважды. -<pre> -void foo() -{ - if (a) - { - bar(); - } -} -</pre> -</li> -</ul></body></html> - - - Align continuation lines: - Выравнивание продолжений строк: - - - <html><head/><body> -Influences the indentation of continuation lines. - -<ul> -<li>Not At All: Do not align at all. Lines will only be indented to the current logical indentation depth. -<pre> -(tab)int i = foo(a, b -(tab)c, d); -</pre> -</li> - -<li>With Spaces: Always use spaces for alignment, regardless of the other indentation settings. -<pre> -(tab)int i = foo(a, b -(tab) c, d); -</pre> -</li> - -<li>With Regular Indent: Use tabs and/or spaces for alignment, as configured above. -<pre> -(tab)int i = foo(a, b -(tab)(tab)(tab) c, d); -</pre> -</li> -</ul></body></html> - <html><head/><body> -Влияет на отступы продолжений строк. - -<ul> -<li>Не выравнивать: вообще не выравнивать, строки сдвигаются только на текущий логический уровень. -<pre> -(tab)int i = foo(a, b -(tab)c, d); -</pre> -</li> - -<li>Пробелами: всегда использовать пробелы, вне зависимости от установок. -<pre> -(tab)int i = foo(a, b -(tab) c, d); -</pre> -</li> - -<li>Отступами: использовать табуляцию и/или пробелы, в зависимости от настроек выше. -<pre> -(tab)int i = foo(a, b -(tab)(tab)(tab) c, d); -</pre> -</li> -</ul></body></html> - - - Not At All - Не выравнивать - - - With Spaces - Пробелами - - - With Regular Indent - Отступами - - TextEditor::DisplaySettingsPage @@ -19490,7 +22609,7 @@ Influences the indentation of continuation lines. The color scheme "%1" was modified, do you want to save the changes? - Цветовая схема "%1" изменилась, желаете сохранить изменения? + Цветовая схема «%1» изменилась, желаете сохранить изменения? Discard @@ -19542,7 +22661,7 @@ The following encodings are likely to fit: Select encoding for "%1".%2 - Выберите кодировку для "%1".%2 + Выберите кодировку для «%1».%2 Reload with Encoding @@ -19767,6 +22886,51 @@ Please check the directory's access rights. Показать настройки подсветки + + TextEditor::Internal::PlainTextSnippetProvider + + Text + Текст + + + + TextEditor::Internal::SnippetsSettingsPagePrivate + + Snippets + Фрагменты + + + Error + Ошибка + + + No snippet selected. + Фрагмент не выбран. + + + + TextEditor::Internal::SnippetsTableModel + + Error + Ошибка + + + Not a valid trigger. + Неверное замещение. + + + Trigger + Замещение + + + Trigger Variant + Замещение варианта + + + Error reverting snippet. + Ошибка отката фрагмента. + + TextEditor::Internal::TextEditorPlugin @@ -19801,6 +22965,30 @@ Please check the directory's access rights. Alt+Return + + Selected text within the current document. + Выделенный текст внутри текущего документа. + + + Line number of the text cursor position in current document (starts with 1). + Номер строки текущего документа, в которой находится курсор (счёт идёт с 1). + + + Column number of the text cursor position in current document (starts with 0). + Номер столбца текущего документа, в котором находится курсор (счёт идёт с 0). + + + Number of lines visible in current document. + Количество видимых строк текущего документа. + + + Number of columns visible in current document. + Количество видимых стобцов текущего документа. + + + Current document's font size in points. + Размер шрифта в точках в текущем документе. + TextEditor::TextEditorActionHandler @@ -19945,6 +23133,22 @@ Please check the directory's access rights. Ctrl+Return + + Uppercase Selection + В верхний регистр + + + Alt+Shift+U + + + + Lowercase Selection + В нижний регистр + + + Alt+U + + Goto Line Start Перейти в начало строки @@ -19977,6 +23181,14 @@ Please check the directory's access rights. Goto Next Word Перейти на следующее слово + + Goto Previous Word Camel Case + Перейти к предыдущему слову Верблюжего Регистра + + + Goto Next Word Camel Case + Перейти к следующему слову Верблюжего Регистра + Goto Line Start With Selection Перейти в начало строки с выделением @@ -20089,6 +23301,14 @@ Please check the directory's access rights. Ctrl+J + + Goto Previous Word Camel Case With Selection + Перейти к предыдущему слову Верблюжего Регистра с выделением + + + Goto Next Word Camel Case With Selection + Перейти к следующему слову Верблюжего Регистра с выделением + <line number> <номер строки> @@ -20277,62 +23497,18 @@ Please check the directory's access rights. - ToolChain + ToolChainOptionsPage - GCC - + Add + Добавить - Intel C++ Compiler (Linux) - + Remove + Удалить - Microsoft Visual C++ - - - - Windows CE - - - - WINSCW - - - - GCCE - - - - GCCE/GnuPoc - - - - RVCT (ARMV6)/GnuPoc - - - - RVCT (ARMV5) - - - - RVCT (ARMV6) - - - - GCC for Maemo - GCC для Maemo - - - Other - Другой - - - <Invalid> - <Некорректный> - - - <Unknown> - <Неизвестный> + Clone + Дублировать @@ -20428,6 +23604,13 @@ Please check the directory's access rights. + + Utils::AbstractProcess + + Cannot retrieve debugging output. + Не удалось получить отладочный вывод. + + Utils::CheckableMessageBox @@ -20464,9 +23647,13 @@ Please check the directory's access rights. Cannot create temporary file: %1 Не удалось создать временный файл: %1 + + Cannot write temporary file. Disk full? + Не удалось записать во временный файл. Нет места? + Cannot create temporary directory '%1': %2 - Не удалось создать временный каталог '%1': %2 + Не удалось создать временный каталог «%1»: %2 Unexpected output from helper program (%1). @@ -20474,23 +23661,39 @@ Please check the directory's access rights. Cannot change to working directory '%1': %2 - Не удалось войти в рабочий каталог '%1': %2 + Не удалось войти в рабочий каталог «%1»: %2 Cannot execute '%1': %2 - Не удалось выполнить '%1': %2 + Не удалось выполнить «%1»: %2 + + + Quoting error in command. + Ошибка с кавычками в команде. + + + Debugging complex shell commands in a terminal is currently not supported. + Отладка сложных команд оболочки в терминале пока не поддерживается. + + + Quoting error in terminal command. + Ошибка с кавычками в терминальной команде. + + + Terminal command may not be a shell command. + Терминальная команда, возможно, не является командой оболочки. Cannot start the terminal emulator '%1'. - Не удалось запустить эмулятор терминала '%1'. + Не удалось запустить эмулятор терминала «%1». Cannot create socket '%1': %2 - Не удалось создать сокет '%1': %2 + Не удалось создать сокет «%1»: %2 The process '%1' could not be started: %2 - Не удалось запустить процесс '%1': %2 + Не удалось запустить процесс «%1»: %2 Cannot obtain a handle to the inferior: %1 @@ -20515,6 +23718,10 @@ Please check the directory's access rights. Debug port: Порт отладки: + + <a href="qthelp://com.nokia.qtcreator/doc/creator-debugging-qml.html">What are the prerequisites?</a> + <a href="qthelp://com.nokia.qtcreator/doc/creator-debugging-qml.html">Зачем нужно?</a> + Utils::DetailsButton @@ -20523,6 +23730,31 @@ Please check the directory's access rights. Подробнее + + Utils::EnvironmentModel + + <UNSET> + <не задано> + + + Variable + Переменная + + + Value + Значение + + + <VARIABLE> + Name when inserting a new variable + <переменная> + + + <VALUE> + Value when inserting a new variable + <значение> + + Utils::FancyMainWindow @@ -20546,11 +23778,11 @@ Please check the directory's access rights. Invalid character '%1'. - Неверный символ "%1". + Неверный символ «%1». Invalid characters '%1'. - Неверные символы "%1". + Неверные символы «%1». Name matches MS Windows device. (%1). @@ -20602,6 +23834,158 @@ Please check the directory's access rights. Очистить текст + + Utils::Internal::SftpChannelPrivate + + Server could not start sftp subsystem. + Серверу не удалось запустить подсистему sftp. + + + Unexpected packet of type %1. + Неожиданный пакет типа %1. + + + Protocol version mismatch: Expected %1, got %2 + Недопустимая версия протокола: требуется %1, а фактически %2 + + + Unknown error. + Неизвестная ошибка. + + + Created remote directory '%1'. + Создан внешний каталог «%1». + + + Remote directory '%1' already exists. + Внешний каталог «%1» уже существует. + + + Error creating directory '%1': %2 + Ошибка создания каталога «%1»: %2 + + + Could not open local file '%1': %2 + Не удалось открыть локальный файл «%1»: %2 + + + Remote directory could not be opened for reading. + Не удалось открыть внешний каталог для чтения. + + + Failed to list remote directory contents. + Не удалось список файлов внешнего каталога. + + + Failed to close remote directory. + Не удалось закрыть внешний каталог. + + + Failed to open remote file for reading. + Не удалось открыть внешний файл для чтения. + + + Failed retrieve information on the remote file ('stat' failed). + Не удалось получить информацию о внешнем файле (ошибка «stat»). + + + Failed to read remote file. + Не удалось прочитать внешний файл. + + + Failed to close remote file. + Не удалось закрыть внешний файл. + + + Failed to open remote file for writing. + Не удалось открыть внешний файл для записи. + + + Failed to write remote file. + Не удалось записать во внешний файл. + + + Cannot append to remote file: Server does not support the file size attribute. + Не удалось добавить к внешнему файлу: сервер не поддерживает атрибут размера файла. + + + Server could not start session. + Серверу не удалось запустить сессию. + + + Error reading local file: %1 + Ошибка чтения локального файла: %1 + + + + Utils::Internal::SshChannelManager + + Invalid channel id %1 + Неверный идентификатор канала %1 + + + + Utils::Internal::SshConnectionPrivate + + SSH Protocol error: %1 + Ошибка протокола SSH: %1 + + + Botan library exception: %1 + Исключение библиотеки Botan: %1 + + + Invalid protocol version: Expected '2.0', got '%1'. + Недопустимая версия протокола: требуется «2.0«», а фактически «%1». + + + Invalid server id '%1'. + Недопустимый идентификатор «%1». + + + Unexpected packet of type %1. + Неожиданный пакет типа %1. + + + Could not read private key file: %1 + Не удалось прочитать файл секретного ключа: %1 + + + Password expired. + Время действия пароля истекло. + + + Server rejected password. + Сервер отклонил пароль. + + + Server rejected key. + Сервер отклонил ключ. + + + The server sent an unexpected SSH packet of type SSH_MSG_UNIMPLEMENTED. + Сервер послал неожиданный пакет SSH типа SSH_MSG_UNIMPLEMENTED. + + + Server closed connection: %1 + Сервер закрыл подключение: %1 + + + Connection closed unexpectedly. + Соединение неожиданно закрылось. + + + Timeout waiting for reply from server. + Вышло время ожидания ответа от сервера. + + + + Utils::IpAddressLineEdit + + The IP address is not valid. + Не верный IP адрес. + + Utils::LinearProgressWidget @@ -20617,15 +24001,15 @@ Please check the directory's access rights. Invalid header file name: '%1' - Некорректное имя заголовочного файла: '%1' + Некорректное имя заголовочного файла: «%1» Invalid source file name: '%1' - Некорректное имя файла исходников: '%1' + Некорректное имя файла исходников: «%1» Invalid form file name: '%1' - Некорректное имя файла формы: '%1' + Некорректное имя файла формы: «%1» Inherits QObject @@ -20702,11 +24086,6 @@ Please check the directory's access rights. Choose File Выбор файла - - <not valid> - Selected path is not valid: - <неверный> - Full path: <b>%1</b> Полный путь: <b>%1</b> @@ -20717,7 +24096,7 @@ Please check the directory's access rights. The path '%1' does not exist. - Путь '%1' не существует. + Путь «%1» не существует. The path <b>%1</b> is not a directory. @@ -20756,7 +24135,7 @@ Please check the directory's access rights. From "%1" - Из "%1" + Из «%1» @@ -20794,7 +24173,14 @@ Please check the directory's access rights. Utils::ProjectNameValidatingLineEdit Invalid character '.'. - Недопустимый символ ".". + Недопустимый символ «.». + + + + Utils::QtcProcess + + Error in command line. + Ошибка в командной строке. @@ -20838,23 +24224,23 @@ Please check the directory's access rights. Utils::SynchronousProcess The command '%1' finished successfully. - Команда "%1" успешно завершилась. + Команда «%1» успешно завершилась. The command '%1' terminated with exit code %2. - Команда "%1" завершилась с кодом %2. + Команда «%1» завершилась с кодом %2. The command '%1' terminated abnormally. - Команда "%1" аварийно завершилась. + Команда «%1» аварийно завершилась. The command '%1' could not be started. - Невозможно запустить команду "%1". + Невозможно запустить команду «%1». The command '%1' did not respond within the timeout limit (%2 ms). - Команда "%1" не ответила за отведённое время (%2 ms). + Команда «%1» не ответила за отведённое время (%2 ms). Process not Responding @@ -20866,7 +24252,7 @@ Please check the directory's access rights. The process '%1' is not responding. - Процесс "%1" не отвечает. + Процесс «%1» не отвечает. Would you like to terminate it? @@ -21039,6 +24425,26 @@ Please check the directory's access rights. Subversion Diff Editor Редактор изменений Subversion + + Bazaar Command Log Editor + Редактор журнала команд Bazaar + + + Bazaar File Log Editor + Редактор журнала файлов Bazaar + + + Bazaar Annotation Editor + Редактор аннотации Bazaar + + + Bazaar Diff Editor + Редактор изменений Bazaar + + + Bazaar Commit Log Editor + Редактор журнала команд Bazaar + VCSBase @@ -21063,11 +24469,11 @@ Please check the directory's access rights. Failed to open project in '%1'. - Не удалось открыть проект в '%1'. + Не удалось открыть проект в «%1». Could not find any project files matching (%1) in the directory '%2'. - Не удалось найти ни одного файла проекта соответствующего "%1" в каталоге "%2". + Не удалось найти ни одного файла проекта соответствующего «%1» в каталоге «%2». The Project Explorer is not available. @@ -21075,11 +24481,11 @@ Please check the directory's access rights. '%1' does not exist. - '%1' отсутствует. + «%1» отсутствует. Unable to open the project '%1'. - Не удалось открыть проект '%1'. + Не удалось открыть проект «%1». @@ -21088,10 +24494,6 @@ Please check the directory's access rights. WizardPage WizardPage - - Checkout Directory: - Каталог извлечения: - ... @@ -21125,12 +24527,16 @@ Please check the directory's access rights. Путь, в котором будет создан каталог с загруженными данными. - Checkout Path: + The local directory that will contain the code after the checkout. + Локальный каталог, который будет содержать код после загрузки. + + + Checkout path: Путь загрузки: - The local directory that will contain the code after the checkout. - Локальный каталог, который будет содержать код после загрузки. + Checkout directory: + Каталог извлечения: @@ -21223,7 +24629,7 @@ Please check the directory's access rights. Cannot open '%1': %2 - Не удалось открыть "%1": %2 + Не удалось открыть «%1»: %2 @@ -21261,14 +24667,21 @@ Please check the directory's access rights. - VCSBase::VCSBaseEditor + VCSBase::VCSBaseClient + + Working... + Выполнение... + + + + VCSBase::VCSBaseEditorWidget Annotate "%1" - Аннотация '%1' + Аннотация «%1» Copy "%1" - Копировать "%1" + Копировать «%1» Describe change %1 @@ -21279,7 +24692,7 @@ Please check the directory's access rights. VCSBase::VCSBaseOutputWindow Open "%1" - Открыть "%1" + Открыть «%1» Clear @@ -21310,7 +24723,7 @@ Please check the directory's access rights. The file '%1' could not be deleted. - Не удалось удалить файл "%1". + Не удалось удалить файл «%1». Choose Repository Directory @@ -21318,7 +24731,7 @@ Please check the directory's access rights. The directory '%1' is already managed by a version control system (%2). Would you like to specify another directory? - Каталог "%1" уже находится под системой контроля версий (%2). Желаете выбрать другой каталог? + Каталог «%1» уже находится под системой контроля версий (%2). Желаете выбрать другой каталог? Repository already under version control @@ -21369,19 +24782,19 @@ Please check the directory's access rights. Unable to open '%1': %2 - Не удалось открыть "%1": %2 + Не удалось открыть «%1»: %2 The check script '%1' could not be started: %2 - Скрипт проверки '%1' не запускается: %2 + Скрипт проверки «%1» не запускается: %2 The check script '%1' timed out. - Вышло время ожидания проверочного скрипта "%1". + Вышло время ожидания проверочного скрипта «%1». The check script '%1' crashed - Скрипт проверки "%1" завершился авариайно + Скрипт проверки «%1» завершился авариайно The check script returned exit code %1. @@ -21389,16 +24802,173 @@ Please check the directory's access rights. - VCSManager + VCSBase::VCSJobRunner - Version Control - Контроль версий + Unable to start process '%1': %2 + Не удалось запустить процесс «%1»: %2 - Would you like to remove this file from the version control system (%1)? -Note: This might remove the local file. - Отменить контроль версий (%1) для этого файла? -Замечание: Это может привести к удалению файла. + Timed out after %1s waiting for the process %2 to finish. + Вышло время ожидания (%1 сек) завершения процесса %2. + + + + Valgrind::XmlProtocol + + Function: + Функция: + + + Location: + Размещение: + + + Instruction pointer: + Указатель инструкций: + + + Object: + Объект: + + + + Valgrind::XmlProtocol::ErrorListModel + + What + Что + + + Location + Размещение + + + File + Файл + + + Line + Строка + + + Unique + Уникальный + + + Thread ID + ID потока + + + Kind + Вид + + + Leaked Blocks + Потерянные блоки + + + Leaked Bytes + Потерянные байты + + + Helgrind Thread ID + ID потока Helgrind + + + + Valgrind::XmlProtocol::Parser + + Could not parse hex number from "%1" (%2) + Не удалось разобрать шестнадцатеричное число из «%1» (%2) + + + trying to read element text although current position is not start of element + попытка прочитать текст элемента не смотря на то, что текущая позиция не в начале элемента + + + Unexpected child element while reading element text + Неожиданный потомок элемента при чтении текста + + + Unexpected token type %1 + Неожиданный тип токена %1 + + + Could not parse protocol version from "%1" + Не удалось разобрать версию протокола из «%1» + + + XmlProtocol version %1 not supported (supported version: 4) + XmlProtocol версии %1 не поддерживается (поддерживается вресия 4) + + + Valgrind tool "%1" not supported + Утилита Valgrind «%1» не поддерживается + + + Unknown memcheck error kind "%1" + Неизвестная ошибка memcheck вида «%1» + + + Unknown helgrind error kind "%1" + Неизвестная ошибка helgrind вида «%1» + + + Unknown ptrcheck error kind "%1" + Неизвестная ошибка ptrcheck вида «%1» + + + Could not parse error kind, tool not yet set. + Не удалось разобрать вид ошибки, утилита ещё не задана. + + + Unknown state "%1" + Неверное состояние «%1» + + + Unexpected exception caught during parsing. + Возникло неожиданное исключение при разборе. + + + + Valgrind::XmlProtocol::StackModel + + Description + Описание + + + Instruction Pointer + Указатель инструкций + + + Object + Объект + + + Function + Функция + + + Directory + Каталог + + + File + Файл + + + Line + Строка + + + + ValgrindConfigWidget + + Common Valgrind Options + Общие параметры Valgrind + + + Valgrind executable: + Программа Valgrind: @@ -21462,6 +25032,10 @@ p, li { white-space: pre-wrap; } Is visible Виден + + Smooth + Сглаживание + Clip Обрезка @@ -21604,15 +25178,15 @@ p, li { white-space: pre-wrap; } Failed to create instance of file '%1': %2 - Не удалось создать экземпляр файла "%1": %2 + Не удалось создать экземпляр файла «%1»: %2 Failed to create instance of file '%1'. - Не удалось создать экземпляр файла "%1". + Не удалось создать экземпляр файла «%1». File '%1' is not a QmlDesigner plugin. - Файл "%1" не является модулем QmlDesigner. + Файл «%1» не является модулем QmlDesigner. @@ -21622,88 +25196,6 @@ p, li { white-space: pre-wrap; } ничего не выбрано или выбрано несколько элементов - - mainClass - - main - main - - - Text1: - Text1: - - - N/A - Н/Д - - - Text2: - Text2: - - - Text3: - Text3: - - - - qdesigner_internal::QtGradientStopsController - - H - H - - - S - S - - - V - V - - - Hue - Тон - - - Sat - Нас - - - Val - Знч - - - Saturation - Насыщенность - - - Value - Значение - - - R - R - - - G - G - - - B - B - - - Red - Красный - - - Green - Зелёный - - - Blue - Голубой - - trk::BaseCommunicationStarter @@ -21735,7 +25227,7 @@ p, li { white-space: pre-wrap; } Unable to run '%1': %2 - Не удалось запустить "%1": %2 + Не удалось запустить «%1»: %2 %1: Bluetooth listener running (%2). @@ -21758,15 +25250,19 @@ p, li { white-space: pre-wrap; } trk::Launcher Cannot open remote file '%1': %2 - Невозможно открыть внешний файл "%1": %2 + Невозможно открыть внешний файл «%1»: %2 Cannot open '%1': %2 - Невозможно открыть "%1": %2 + Невозможно открыть «%1»: %2 + + + No device is connected. Please connect a device and try again. + Устройство не подключено. Подключите устройство и попробуйте снова. Unable to acquire a device for port '%1'. It appears to be in use. - Не удалось получить доступ к устройству через "%1". Возможно, оно уже используется. + Не удалось получить доступ к устройству через «%1». Возможно, оно уже используется. @@ -21827,4 +25323,11 @@ p, li { white-space: pre-wrap; } Подключение к %1... + + Macros + + Macros + Сценарии + +