diff --git a/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-arc.qdoc b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-arc.qdoc index 37af1be5483..f4efa4066dc 100644 --- a/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-arc.qdoc +++ b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-arc.qdoc @@ -1,6 +1,6 @@ /**************************************************************************** ** -** Copyright (C) 2019 The Qt Company Ltd. +** Copyright (C) 2020 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the Qt Design Studio documentation. @@ -59,8 +59,8 @@ have an outline, the \l capStyle property specifies whether the line ends are square or rounded. - Because an arc has curves, it may be appropriate to set the \l antialiasing - property to improve its appearance. + Because an arc has curves, it may be appropriate to set the \c antialiasing + property that is inherited from \l Item to improve its appearance. \section2 Example Usage @@ -207,7 +207,7 @@ When set to \c transparent, no line is drawn. - The default value is \c white. + The default value is \c red. \sa QColor */ @@ -233,7 +233,7 @@ When set to a negative value, no line is drawn. - The default value is 1. + The default value is 4. The total width of an arc that has an outline (that is, the outline and the fill) is specified by \l arcWidth. @@ -255,6 +255,8 @@ The position in degrees where the arc ends. + The default value is 90. + To create a circle, set the value of this property to 360 and the value of the \l begin property to 0. */ @@ -265,6 +267,8 @@ The total width of an arc that has an outline, including the outline and fill. + The default value is 10. + \sa arcWidthBegin, arcWidthEnd, strokeWidth */ @@ -306,14 +310,6 @@ The area between the \l begin and \l end points of the arc. */ -/*! - \qmlproperty bool Arc::antialiasing - - Whether the arc should be antialiased. - - Antialiasing might require more memory and slow down drawing the type. -*/ - /*! \qmlproperty bool Arc::outlineArc diff --git a/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-border.qdoc b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-border.qdoc index 0f00044dd19..a49d4533c9c 100644 --- a/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-border.qdoc +++ b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-border.qdoc @@ -1,6 +1,6 @@ /**************************************************************************** ** -** Copyright (C) 2019 The Qt Company Ltd. +** Copyright (C) 2020 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the Qt Design Studio documentation. @@ -43,7 +43,8 @@ The \l radius property specifies whether the border corners are rounded. The radius can also be specified separately for each corner. Because this introduces curved edges to the corners, it may be appropriate to set the - \l antialiasing property to improve the appearance of the border. + \c antialiasing property that is inherited from \l Item to improve the + appearance of the border. The \l joinStyle property specifies how to connect two border line segments. @@ -108,6 +109,8 @@ The radius used to draw rounded corners. + The default value is 10. + If radius is non-zero, the corners will be rounded, otherwise they will be sharp. The radius can also be specified separately for each corner by using the \l bottomLeftRadius, \l bottomRightRadius, \l topLeftRadius, and @@ -226,7 +229,7 @@ When set to \c transparent, no line is drawn. - The default value is \c white. + The default value is \c red. \sa QColor */ @@ -252,7 +255,7 @@ When set to a negative value, no line is drawn. - The default value is 1. + The default value is 4. */ /*! @@ -287,14 +290,6 @@ The border segment is drawn if this property is set to \c true. */ -/*! - \qmlproperty bool Border::antialiasing - - Whether the border should be antialiased. - - Antialiasing might require more memory and slow down drawing the type. -*/ - /*! \qmlproperty enumeration Border::borderMode diff --git a/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-pie.qdoc b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-pie.qdoc index e09e6038f24..b7266ff0f1d 100644 --- a/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-pie.qdoc +++ b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-pie.qdoc @@ -1,6 +1,6 @@ /**************************************************************************** ** -** Copyright (C) 2019 The Qt Company Ltd. +** Copyright (C) 2020 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the Qt Design Studio documentation. @@ -49,7 +49,8 @@ rounded. Because a pie has curved edges, it may be appropriate to set the - \l antialiasing property to improve its appearance. + \c antialiasing property that is inherited from \l Item to improve + its appearance. \section2 Example Usage @@ -184,7 +185,7 @@ When set to \c transparent, no line is drawn. - The default value is \c white. + The default value is \c red. \sa QColor */ @@ -210,7 +211,7 @@ When set to a negative value, no line is drawn. - The default value is 1. + The default value is 4. */ /*! @@ -229,6 +230,8 @@ The position in degrees where the pie ends. + The default value is 90. + To create a circle, set the value of this property to 360 and the value of the \l begin property to 0. */ @@ -239,13 +242,6 @@ The area between \l begin and \l end. */ -/*! - \qmlproperty bool Pie::antialiasing - - Whether the pie should be antialiased. - - Antialiasing might require more memory and slow down drawing the type. -*/ /*! \qmlproperty bool Pie::hideLine diff --git a/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-rectangle.qdoc b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-rectangle.qdoc index dc792addb44..f30f6fee940 100644 --- a/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-rectangle.qdoc +++ b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-rectangle.qdoc @@ -1,6 +1,6 @@ /**************************************************************************** ** -** Copyright (C) 2019 The Qt Company Ltd. +** Copyright (C) 2020 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the Qt Design Studio documentation. @@ -47,7 +47,8 @@ Rounded rectangles can be drawn using the \l radius property. The radius can also be specified separately for each corner. Because this introduces curved edges to the corners of a rectangle, it may be appropriate to set - the \l antialiasing property to improve the appearance of the rectangle. + the \c antialiasing property that is inherited from \l Item to improve the + appearance of the rectangle. \section2 Example Usage @@ -143,6 +144,8 @@ The radius used to draw rounded corners. + The default value is 10. + If radius is non-zero, the corners will be rounded, otherwise they will be sharp. The radius can also be specified separately for each corner by using the \l bottomLeftRadius, \l bottomRightRadius, \l topLeftRadius, and @@ -241,7 +244,7 @@ When set to \c transparent, no line is drawn. - The default value is \c white. + The default value is \c red. \sa QColor */ @@ -265,6 +268,8 @@ The width of the border of the rectangle. + The default value is 4. + A width of 1 creates a thin line. For no line, use a negative value or a transparent color. @@ -274,10 +279,3 @@ The border is rendered within the rectangle's boundaries. */ - -/*! - \qmlproperty bool Rectangle::antialiasing - - Whether the Rectangle should be antialiased. Antialiasing might - require more memory and slow down drawing the type. -*/ diff --git a/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-svgPath.qdoc b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-svgPath.qdoc index 3a460382b2a..78a04e10835 100644 --- a/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-svgPath.qdoc +++ b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-svgPath.qdoc @@ -1,6 +1,6 @@ /**************************************************************************** ** -** Copyright (C) 2019 The Qt Company Ltd. +** Copyright (C) 2020 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the Qt Design Studio documentation. @@ -48,8 +48,8 @@ using the \l gradient property. If both a color and a gradient are specified, the gradient is used. - If the path has curves, it may be appropriate to set the \l antialiasing - property to improve its appearance. + If the path has curves, it may be appropriate to set the \c antialiasing + property that is inherited from \l Item to improve its appearance. \note Mixing SvgPath with other types of elements is not always supported. For example, when \l Shape is backed by \c GL_NV_path_rendering, a @@ -165,7 +165,7 @@ When set to \c transparent, no line is drawn. - The default value is \c white. + The default value is \c red. \sa QColor */ @@ -191,7 +191,7 @@ When set to a negative value, no line is drawn. - The default value is 1. + The default value is 4. */ /*! @@ -202,11 +202,3 @@ For more information, see \l{https://www.w3.org/TR/SVG/paths.html#PathData} {W3C SVG Path Data}. */ - -/*! - \qmlproperty bool SvgPath::antialising - - Whether the path should be antialiased. - - Antialiasing might require more memory and slow down drawing the type. -*/ diff --git a/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-triangle.qdoc b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-triangle.qdoc index a8431b2f06a..d627fe4bf3f 100644 --- a/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-triangle.qdoc +++ b/doc/qtdesignstudio/src/qtquickdesigner-components/components/qqs-components-triangle.qdoc @@ -1,6 +1,6 @@ /**************************************************************************** ** -** Copyright (C) 2019 The Qt Company Ltd. +** Copyright (C) 2020 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the Qt Design Studio documentation. @@ -177,7 +177,7 @@ When set to \c transparent, no line is drawn. - The default value is \c white. + The default value is \c red. \sa QColor */ @@ -201,6 +201,8 @@ The width of the border of the rectangle. + The default value is 4. + A width of 1 creates a thin line. For no line, use a negative value or a transparent color. @@ -214,9 +216,14 @@ /*! \qmlproperty int Triangle::radius - Defines the rotation of the triangle in degrees. The default value is 0. + The radius used to draw rounded corners. - This property can be used together with the \l radius property to + The default value is 5. + + If radius is non-zero, the corners will be rounded, otherwise they will + be sharp. + + This property can be used together with the \l arcRadius property to determine the shape of the triangle. \sa arcRadius @@ -227,6 +234,8 @@ The radius used to draw rounded corners. + The default value is 5. + If radius is non-zero, the corners will be rounded, otherwise they will be sharp. @@ -277,11 +286,3 @@ \sa topMargin, leftMargin, rightMargin */ - -/*! - \qmlproperty bool Triangel::antialiasing - - Whether the triangle should be antialiased. - - Antialiasing might require more memory and slow down drawing the type. -*/