Doc: Remove information about connecting UWP devices

...because no additional steps are needed to the explanations in
the sections about building and running applications.

Change-Id: I8b60c95ce45f025d696a806ab09d43132607e355
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>

doc/src/overview/creator-mobile-targets.qdoc

@@ -39,8 +39,9 @@
 
     You can connect \l{glossary-device}{devices} to the development PC to run, debug,
     and analyze applications built for them from \QC. When you install Qt for a
-    target platform, such as Android or QNX, the build and run settings for the
+    target platform, such as Android, QNX, or Universal Windows Platform (UWP),
-    development targets might be set up automatically in \QC.
+    the build and run settings for the development targets might be set up
+    automatically in \QC.
 
     You can connect the device to the development PC using a USB connection.
     Additionally, you can connect Linux-based devices by using a WLAN
@@ -82,13 +83,6 @@
             supported for QNX Neutrino devices, and requires the QNX SDK to be
             installed on the development PC.
 
-        \li \l{Connecting UWP Devices}
-
-            You can build applications for the Universal Windows Platform (UWP)
-            and run them on any Windows 10 devices, such as PC, tablet, or
-            phone. You can install the necessary tool chains as part of Qt 5.9
-            or later.
-
     \endlist
 
 */

doc/src/projects/creator-projects-builds-customizing.qdoc

@@ -31,7 +31,7 @@
 
 /*!
     \contentspage {Qt Creator Manual}
-    \previouspage creator-developing-uwp.html
+    \previouspage creator-developing-qnx.html
     \page creator-build-process-customizing.html
     \nextpage creator-testing.html
 

doc/src/qnx/creator-developing-qnx.qdoc

@@ -32,7 +32,7 @@
     \contentspage {Qt Creator Manual}
     \previouspage creator-developing-ios.html
     \page creator-developing-qnx.html
-    \nextpage creator-developing-uwp.html
+    \nextpage creator-build-process-customizing.html
 
     \title Connecting QNX Devices
 

doc/src/qtcreator-toc.qdoc

@@ -156,7 +156,6 @@
                 \li \l{Connecting Embedded Linux Devices}
                 \li \l{Connecting iOS Devices}
                 \li \l{Connecting QNX Devices}
-                \li \l{Connecting UWP Devices}
             \endlist
             \li \l{Customizing the Build Process}
         \endlist

doc/src/uwp/creator-uwp.qdoc

@@ -1,76 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2017 The Qt Company Ltd.
-** Contact: https://www.qt.io/licensing/
-**
-** This file is part of the Qt Creator documentation.
-**
-** Commercial License Usage
-** Licensees holding valid commercial Qt licenses may use this file in
-** accordance with the commercial license agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and The Qt Company. For licensing terms
-** and conditions see https://www.qt.io/terms-conditions. For further
-** information use the contact form at https://www.qt.io/contact-us.
-**
-** GNU Free Documentation License Usage
-** Alternatively, this file may be used under the terms of the GNU Free
-** Documentation License version 1.3 as published by the Free Software
-** Foundation and appearing in the file included in the packaging of
-** this file. Please review the following information to ensure
-** the GNU Free Documentation License version 1.3 requirements
-** will be met: https://www.gnu.org/licenses/fdl-1.3.html.
-**
-****************************************************************************/
-
-    /*!
-
-    \contentspage {Qt Creator Manual}
-    \previouspage creator-developing-qnx.html
-    \page creator-developing-uwp.html
-    \nextpage creator-build-process-customizing.html
-
-    \title Connecting UWP Devices
-
-    You can build applications for the Universal Windows Platform (UWP) and run
-    them on any Windows 10 devices, such as PC, tablet, or phone.
-
-    \QC uses the integrated \c windeployqt and \c winrtrunner tools to deploy
-    and run applications. You can also run the tools manually from the command
-    line.
-
-    Since 5.3, the Qt installers add the Windows Runtime and Windows Phone Qt
-    versions to \QC and create the necessary kits. In Qt 5.9, the packages were
-    renamed as UWP packages.
-
-    \image creator-uwp-kits.png "UWP kits"
-
-    To connect UWP devices:
-
-    \list 1
-
-        \li Select \uicontrol Help > \uicontrol {About Plugins} > \uicontrol {Device Support} >
-            \uicontrol WinRT to enable the experimental UWP plugin.
-
-        \li Restart \QC to be able to use the plugin.
-
-        \li To specify build settings:
-
-        \list 1
-
-            \li Open a project for an application you want to develop for the
-                device.
-
-            \li Select \uicontrol Projects > \uicontrol {Build & Run} to
-                enable a kit for building applications and running them on UWP
-                devices.
-
-        \endlist
-
-        \li Select \uicontrol Run to specify run settings.
-
-            Usually, you can use the default settings.
-
-    \endlist
-
-*/