It was needed in the past to trigger e.g. gdbserver setup in
remote cases which is nowadays handled by separate RunWorkers.
Change-Id: I30bce071dab0779cce2e7abef7b31550d8539461
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: David Schulz <david.schulz@qt.io>
This reverts most of 4977c915 and applies the same pattern for
setupEngine. Turns out that the removal was premature due
to the special needs of Android setup.
Task-number: QTCREATORBUG-19199
Change-Id: I4e2ff4f34a842f3296999a0651e7e8fd6470198c
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
De-virtualize requestInterruptInferior() and let always
the master engine react to the request. interruptInferior()
diverts to the active slave in case of the combined engine.
Change-Id: I5d62cf9379c8a452132827897a9ac51e4027f595
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This removes the setupSlaveInferior() synchronization point which
wasn't really needed anymore as it was always triggered in
response to a notifyEngineSetupOk() of the master engine.
Change-Id: I24faec36b180fa961e10dfd88fe4d874f7310140
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The quotes are stripped when the string is presented for editing, so
they have to be added back when we're done editing.
This is what we already did if we were talking to the inspector rather
than the V4 debugger.
In order for this to work, JS numbers need to be identified as numbers,
rather than strings. So, we have to add "number" to the types recognized
as float.
Change-Id: I2054f4ad36ec1d14fb2dfee3705a80c8ec84d5ac
Task-number: QTCREATORBUG-19032
Reviewed-by: hjk <hjk@qt.io>
Each engine has now the RunTool pointer, not just the master.
Change-Id: I6bab026998d5da5da82224bfaf4a93d3cfb3a898
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
... and apply even more force on the second trying by forcing
ramp down of the runControl itself instead of hoping that it
would pick up hints.
Change-Id: I9d0f4130cb9a137b91c9fa81c3d255f236f98be0
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The users (typically target specific DebuggerRunTool derived classes)
are meant to use the individual setter functions nowadays, not the set
up the full structure, so the members are a true implementation
detail now.
Change-Id: Ida04801e3230a2fe8bbadde8845e58c3077c87a5
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Most were never re-implemented, so just for debugging purposes
in the mixed engine.
Change-Id: If569e0e553e3fdd5ef83b3bdfdbd22fd0ad5b90f
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
It might be null. We wrap the retrieval of the data stream version in
QmlDebugClient and return the minimum if connection is null. The extra
copy of the connection QmlEngine is dropped as QmlDebugClient already
has one and we don't want to hit a dangling pointer.
Change-Id: Ida8c45d357d46b4942eea99b77065d3c51c7edb9
Reviewed-by: hjk <hjk@qt.io>
Host and port reasonably belong together, using a QUrl makes that more
explicit and follows the lead of the Qml profiler in that area.
Change-Id: I754cb17d165ce6b2f25c655eeebfd8ac8f5a93c7
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Specify the qml server address and use correct default loop back
address in qmlengine
Change-Id: I9b77cb3385041bbe79900e7f7a188ca26124bacc
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
... and replace it by direct uses of ProcessHandle::activate().
Change-Id: I7beffba7bfbeff72a81b8699ff54a311a74ce1a3
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
... and make use of it.
With gcc 7, the new option -Wimplicit-fallthrough is introduced and
added to the -Wextra set, triggering dozens of warnings in our sources.
Therefore, we annotate all obviously intended fall-throughs. The ones
that are still left are unclear and need to be checked by the respective
maintainer.
Change-Id: I44ead33cd42a4b41c28ee5fcb5a31db272710bbc
Reviewed-by: Nikita Baryshnikov <nib952051@gmail.com>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Not needed anymore in the world of RunWorkers.
Change-Id: Id7fb24fece6acb03de12f2677dd99a05c513e7a4
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
There were only two used target states, and in case of mixed
debugging all parts of the machinery better agree on the
direction. So one bool in the (shared) runTool is sufficient.
Change-Id: Iffbf1651b82dde707cfc37d8da9d3da573b34b76
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The parameters belong to the run control, they should not
be triplicated in case of a combined engine.
Change-Id: I4dd84220edbd7a44b902cc52627fe01d0568db75
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Add some customization hooks to make tools aware of target errors
and vice versa.
Change-Id: I4d815087297a3fa1d1d6d52daeed7c4ae0f624bf
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Less debugger specific code and less convoluted paths in debugger
message handling.
Change-Id: Ib298889c386d65f17acbdfc585188097bb20ed74
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
The QML engine might (in the future) actually send the right message
to indicate a JavaScript null, that is:
{ type: "object", value: null }
This piece of JSON is then transformed into a QVariantMap. The QVariant
that signifies the null is unfortunately different across various Qt
versions. We can, however, detect it.
Change-Id: I3db42bb35a936bc02c749ab3a136b1d297aefdfe
Reviewed-by: hjk <hjk@qt.io>
The QmlDebugConnection can be quite spammy as it repeatedly tries to
connect to the application. Show error messages from this process in the
debugger log and only output a line in the status bar if the connection
is considered to have permanently failed.
Change-Id: I4a5715d9acdac47f690cb8aa67adb5cccff76e11
Task-number: QTCREATORBUG-17492
Reviewed-by: hjk <hjk@qt.io>
Apparently the inspector service does not send a type string for all
objects. As the id string and the object name can also be empty, those
objects are anonymous then. Try to identify them by their source
location and if that doesn't work, just call them "<anonymous>".
Change-Id: I3bd3bad8b78c81ace95bfd7813cdd8bb0f5e14f2
Task-number: QTCREATORBUG-17741
Reviewed-by: hjk <hjk@qt.io>
The v4 debug service doesn't understand "sanity" after all, but wants
to know the features we support. So state that we don't need redundant
references and that we understand names when sent as strings.
Change-Id: Ie973dd8002935a113a367d098337983d61663265
Reviewed-by: hjk <hjk@qt.io>
This signals that we understand packages without extra "handles",
that we can deal with only one level of nesting on replies to lookups
and expression evaluations, and that we can understand script and
function names transmitted as plain strings rather than refs.
Change-Id: Iffdd50179b8f9374e2fc8ad3a03cf44fbc627bf1
Task-number: QTBUG-42435
Reviewed-by: hjk <hjk@qt.io>
The QML engine will send the number of children in an object as the
"value" property together with the ref. We can use that to determine
if an object has children without actually fetching it.
Also, always save the type of a ref, even if we don't know the value
yet. This avoids redundant lookups.
Task-number: QTBUG-42435
Change-Id: Ia423b661187dc054fb5782349d1256711ee11265
Reviewed-by: hjk <hjk@qt.io>
For some of those it doesn't make much sense to assign a ref and the
refs are not stable anyway.
Change-Id: I7b6855225f883b93930b8d501495ef9dd62be7a2
Reviewed-by: hjk <hjk@qt.io>
Instead of letting the launcher decide to raise something when
started (and only then) leave it to the RunControl to trigger
(and for now also to implement) as response to the application
launcher start (or possibly now, in other circumstances).
Change-Id: I0ac8f1e633981f7bf316c88e83c208765886d9a1
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
android app in mixed mode debugging sometimes keeps waiting for the
qml engine connection.
Task-number: QTCREATORBUG-17718
Change-Id: Iee87cd0a6d67babaf08e62a6e106ec22fda430cd
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
doUpdateLocals() was called, but not re-implemented in the
combined case.
Task-number: QTCREATORBUG-17763
Change-Id: Id8c17ce0bda79cd61c57624aea5a05e4aad96c79
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
