Classes involved are BaseAspect and some derived classes,
LayoutBuilder and VariableChooser.
This is mostly mechanical, with various include/using changes
to make it compile.
Change-Id: I624a457f3555f102e541c4c71e33a9423af32250
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
This basically continues / amends work done
with e1c88116b3.
Change-Id: Ia8b3a4694e7fea4c15e344839f87c11fbe8fbbf4
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
In most cases they are used directly, so there's not much Base* in that.
Added the old name as alias as porting help for a while.
Change-Id: I494a8a560b8996bcf74915ea3570b504df6a6b4c
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Now only one piece of code needs to be written to both linkify output in
an output pane and create tasks for it in the issues pane.
The calling sites are also simplified. For instance, until now, build
steps had to feed their output parsers manually and then push the
created tasks up the signal stack in parallel with the actual output,
which the build manager relied upon for cross-linking the output pane
content. Afterwards, the output would get forwarded to the formatter
(and parsed for ANSI escape codes a second time). In contrast, a build
step now just forwards the process output, and task parsing as well as
output formatting is done centrally further up the stack.
Concrete user-visible improvements so far:
- File paths in compiler/linker messages are clickable links now.
- QtTest applications now create clickable links also when run
as part of a build step, not just in the app output pane.
Task-number: QTCREATORBUG-22665
Change-Id: Ic9fb95b2d97f2520ab3ec653315e9219466ec08d
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Note that unloading a building project is generally broken in that the
build manager waits indefinitely for the build step's finished() signal,
but that's a general problem which needs to get addressed in a different
patch. This one fixes a qbs-specific crash.
Fixes: QTCREATORBUG-23851
Change-Id: I93e254acd1c73fe7495d01fcad04ea9301130dd0
Reviewed-by: Ivan Komissarov <ABBAPOH@gmail.com>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
It makes no sense to use the "equivalent command line" value as the step
summary. It's much too long and will never fit into that label.
Change-Id: I55f291c370c97481d37e9f9ba9baec48d7215774
Reviewed-by: hjk <hjk@qt.io>
Saves a few casts and otherwise unneeded accessors.
Change-Id: I7a6ff1e8348a24690f35e69d300463a6c5c18867
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
For Compile, BuildSystem and Deployment. Unclutters user code and reduces
binary size.
Change-Id: Ia18e917bb411754162e9f4ec6056d752a020bb50
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Allows to use constants in fewer places, similar to what e.g.
RunConfiguration does.
Change-Id: I9d049128206c4acf0ce14b06b66d6c090a7c5242
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
That is, do not link to the qbscore library anymore. Instead, use the
JSON-based API.
Advantages:
- We can build Qt Creator with qbs support without qbs being present
on the build machine.
- Smaller memory footprint for Qt Creator, as the qbs build graphs
are now being managed by a separate process.
- Potential crashes in qbs will not kill the Qt Creator process.
Fixes: QTCREATORBUG-20622
Task-number: QTCREATORBUG-22904
Change-Id: If7d344b0ac65a99ff0a3a3db215d61b8d903e47e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... or Target.
This patch moves build system from conceptually "one per project"
to "one per target (i.e. per project-and-kit)" or "per
BuildConfigurations" for targets where the builds differ
significantly.
Building requires usually items from the kit (Qt version, compiler,
...) so a target-agnostic build is practically almost always wrong.
Moving the build system to the target also has the potential
to solve issues caused by switching targets while parsing, that
used Project::activeTarget() regularly, with potentially different
results before and after the switch.
This patch might create performance/size regressions when several
targets are set up per project as the build system implementation's
internal data are duplicated in this case.
The idea is to fix that by sharing per-project pieces again in
the project implementation once these problems occur.
Change-Id: I87f640ce418b93175b5029124eaa55f3b8721dca
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
For some reason, Q_UNUSED includes already a semicolon, adding one
on the user side creates an additional empty statement.
Change-Id: I9c5e8fac381345a60792cb75e2938fd53958d3b0
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
More in line with QFileInfo terminonlogy which appears to be
best-of-breed within Qt.
Change-Id: I1d051ff1c8363ebd4ee56376451df45216c4c9ab
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Originally, the build manager used to run all build steps in a dedicated
thread. Communication between the step and the manager happened via a
QFutureInterface that was passed into the step's run() function.
Later, new steps were added that operated asynchronously, so the build
manager had to differentiate between the different kinds of steps for
starting and stopping.
These days, almost all build and deploy steps work asynchronously, which
made the QFuture-based interface look increasingly odd.
With this patch, all build steps are expected to work asynchronously, so
the build manager no longer needs to differentiate. Steps are started
and requested to stop via the run() and cancel() functions,
respectively, and emit the finished() signal when they are done. Build
step implementors no longer have to deal with a QFutureInterface. For
steps whose implementation is inherently synchronous, the BuildStep base
class offers a runInThread() function.
Change-Id: If905c68b234c5a669f6e19f43142eaa57d594803
Reviewed-by: hjk <hjk@qt.io>
... and use the QbsCleanStep as guinea pig.
Change-Id: Ic0d62700bf48fc7971a290c90394c74b8860b9ff
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The extra parameter was always computed but used only in one place,
and that use got removed lately.
Change-Id: Ie10c0107ca70ee97ce03f83294992aab8d1a3ffe
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
From a virtual function to a normal one backed by a real data member.
That's essentially what several re-implementations did, the other
ones used a fixed value instead.
Change-Id: I61e45f1d4f7f0f80fe2eb1f2729785f37e7bb803
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Use BuildStep::displayName() as default.
This probably could be the only possibility, but currently there
are some discrepancies that are kept in this patch to make
the patch mechanical.
Change-Id: I2a1e5c2ff37ad95e25309eb16e07099e42191f60
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The extra m_step member is not worth the abstraction, especially
since almost all non-SimpleBuildStepWidget have something similar,
too. Also, as several derived classes needed to correct
SimpleBuildStepWidget's setShowWidget(false).
Change-Id: I6e80d8c84c363b90dc27c70abd7fa6cefa1ed91e
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
De-QObject-ify class, tr contexts are now the product's
context, which was the case in some BuildStepFactories already,
and is current state in {Run,DeployConfiguration}Factory.
One spurious object name removed.
De-virtualize canHandle(), it was never overloaded and is not
intended to be overloaded anymore.
Remove unused clone() function.
Change-Id: Iff7fba5f707505f868f94458084a18650535fa23
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
If a step is part of a build configuration, that is used, but many steps
can be used as part of a deploy configuration.
In that case the active build configuration of the step's target must be
used, and that logic was duplicated many times.
Instead, let BuildStep::buildConfiguration take care of that logic. For
steps that are not offered for deploy configurations there is no
semantic difference, and for the others this removes code duplication.
Change-Id: I02f3bb50226590092cedcec02fce6fde9c7c6e63
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
While the base function is not virtual the "hiding" re-implementation
effectively appears to do the same. So drop it.
Change-Id: I4ab0e0690b948ce3f590c87262d10622b169450e
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
This follow the rough pattern of recent *RunConfigurationFactory changes
for build and deploy configurations.
- Collapse the two lines of constructors similar to what
890c1906e6 did for RunConfigurations
* Deploy* was purely mechanical
* Build* ctors are split in connects() in the ctor body
to create "empty shell for clone" etc
and build step additions in initialize() functions which
are only used in the create() case.
-- Allows to collapse the shared 'ctor()' functions, too.
- Move FooBuildConfigurationFactory::create() implementations
to FooBuildConfiguration() constructor. That was a strange
and unneeded ping-pong between factories and objects, and
furthermore allows one level less of indirection (and for a
later, left out here, some reduction of the
FooBuildConfiguration interfaces that were only used to
accommodate the *Factory::create() functions.
- Most {Build,Deploy}Configuration{,Factory} classes had a canHandle(),
but there wasn't one in the base classses. Have one there.
- Most canHandle() functions were checking simple restrictions on
e.g. project or target types, specify those by setters in the
constructors instead and check them in the base canHandle()
- clone() is generally replaced by a creation of a "shell object"
and a fromMap(source->toMap()), implemented in the base, there
are two cases left for Android and Qbs that needed(?) some extra
polish
- generally use canHandle() in base implementation, instead
of doing that in all Derived::canFoo()
- as a result, canCreate/create/canClone/clone reimplementations
are not needed anymore, keep the base implementation for
now (could be inlined into their only users later), but
de-virtualize them.
- Combine Ios{Preset,DSym}BuildStepFactory. There was only one
'dsym' build step they could create.
- Split the 'mangled' id into the ProjectConfiguration subtype
specific constant identifier, and a QString extraId() bit.
Only maintain the mangled id in saved settings.
- Make ProjectConfiguration::m_id a constant member, adapt
all constructors of derived classe.
Not done in this patch:
- Finish possible cosmetic changes on top
- Add a way to specify restrictions to supported Qt versions
(used in Android/Ios), as the base implementation does not
depend on the qtsupport plugin
- Combine the QList<X> availableFoo() + createFoo(X) function
pairs to somthing like a direct
QList<struct { X; std::function<X()>; }> fooCreators()
to avoid e.g. the baseId.withSuffix() <-> id.suffixAfter(base)
pingpong
- Remove the *Factories from the global object pool
- Do something about priority(). Falling back to plain
qmake in android+qmake setup is not helpful.
Change-Id: I2be7d88d554c5aa8b7db8edf5b93278e1ae0112a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
... and sub-projects. We used to have only the "build" action for these.
Task-number: QTCREATORBUG-15919
Change-Id: I31d06498c0cdadb8a8738be521a98e8b03de32ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... in the build settings. This makes it much easier for users to
properly set the installation directory. In turn, remove the dedicated
install step, which does not know about qbs.installRoot and has not had
sensible functionality ever since that property was introduced.
Task-number: QTCREATORBUG-17198
Change-Id: Id968672f4365e75da437f73ec15bb5e32599bda3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The old ones did not convey their meaning very well. In particular,
NormalOutput and MessageOutput were easily confused.
Change-Id: Ia0a8c1b1c366ab3f5c59f751b37b8b1f68f6831d
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The heavy lifting was done by clazy.
Change-Id: I841454b0815bc697ae2372dbc6d2caa59d7dc3e8
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
This removes 900 lines of duplicated code, some duplicated checks at
runtime and some (minor) quadratic behavior when gathering display names.
canClone(), canRestore() and canCreate() and restore() use the same
pattern. Handle that on the core side once. Leave retore() virtual to let
the ios code unmodified (which is likely not needed, later...). Introduce
'Unclonable' and 'Uncreatable' flags to keep Android package installation
and WinRT deployment (non-)functionality unchanged.
Change-Id: I0325479aff818a4038b2f241ca733b8d8cd66f2f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Remove the finished() signal that is (sometimes) used to report that
a buildstep is done and use the FutureInterface for that purpose
consistently.
Change-Id: Ibe5520b562b91f1a7f4fc73ee898b33b930029ec
Reviewed-by: Tim Jenssen <tim.jenssen@theqtcompany.com>
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
To HEAD of 1.5 branch. Also do the necessary
adaptations in the QbsProjectManager plugin.
Change-Id: Ic4c756b7f6134b9c61bad9635ac25c1e33c75825
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
This information can be used to get information from earlier steps,
which e.g. queried for android devices to deploy to.
Change-Id: Iefe1c9443915cb6211f86f98ff7aaf3cb75145ba
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
Clicking on error messages is supposed to jump to the editor.
And "Show Output" on the task is supposed to select the error
in the output.
The old code just registered the task for the last line of
output. This broke for every parser that allowed for
error messages that spanned multiple lines. And was obviously
also incorrect for tasks that weren't generated due to
compile output.
Fix both of those issues by giving the IOutputParsers more
control on which lines are linked to a task.
Task-number: QTCREATORBUG-14136
Change-Id: I095922c9875620dabfb7d406f6b152c8a9b25b62
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>
Reviewed-by: Daniel Teske <daniel.teske@theqtcompany.com>
- All except the one for "qbs build" were incomplete, which is fixed
now.
- The new implementation is centralized, so maintenance will be simpler.
- The command lines are also completely self-contained now, so they can
be pasted as-is into a shell with no assumptions about the working
directory etc.
Change-Id: I2c684141bcdc5c6da0e1af60ce60278fc4dcd088
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
- Setting the QFuture result is not enough, we also need to emit the
finished() signal.
- Never fail silently; use soft asserts for things that shouldn't happen
and compile pane output for things that can.
Task-number: QBS-705
Change-Id: I4dad18c2ad573a92f2a0c5aa92b596851c56541e
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>
To HEAD of master branch.
Also do the necessary adaptations.
Change-Id: I51830dee41341c9be294caf69fdb0459ed8c8bfe
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Currently we pass in some places by value, elsewhere by const ref and
for some weird reason also by const value in a lot of places. The latter
is particularly annoying, as it is also used in interfaces and therefore
forces all implementors to do the same, since leaving the "const" off is
causing compiler warnings with MSVC.
Change-Id: I65b87dc3cce0986b8a55ff6119cb752361027803
Reviewed-by: hjk <hjk121@nokiamail.com>
