Similar to QT_RESTRICTED_CAST_FROM_ASCII to avoid the need for
decorations in user code.
At the same time, drop some convenience constructors and functions
in CommandLine and Icon essentially serving the same purpose.
Change-Id: Ida4e5ac19c2da0a4298a97b2a8e1511d56bbb79d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This is usually used in a wrong or at least misleading way.
Replace most of the usages by newly introduced GeneralMessageFormat
as most of the replaced usages just print to General Messages and
using any of the existing formats would change the layout of the
text. Except for some special debug output inside the valgrind plugin
that can use one of the existing formats which also makes it easier
to spot them and the runners which print QC internal output.
Task-number: QTCREATORBUG-24560
Change-Id: I824dc4250b2f3e4656bab8676b45c98e3407d59c
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
There are very few reasons to use mainWindow() directly.
Especially for modal dialogs, using dialogParent() is important, since
that guarantees the stacking order in case of other dialogs currently
being open.
Change-Id: I7ad2c23c5034b43195eb35cfe405932a7ea003e6
Reviewed-by: hjk <hjk@qt.io>
... taking a QString for the executable.
This weakens the very explicit QString -> FileName conversion via the
named constructors for the special case of constructing a CommandLine.
I think that's worthwhile here, as it reduces the noise on the caller
site under circumstance where the nature of the thing is obvious.
Change-Id: I27b4a73639728893d053b2e7ba65cb745f0ffe83
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Bring it more in line with the standard pattern.
Plus some cosmetics.
Change-Id: I2297c4e72892db386c50ece7dc64bdc89f0d9010
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
For a long time, probably from the very beginning, a RunControl
was meant to hold (a copy of) data needed for its operation, that was
valid at the time of its construction, to be resilient in cases
where RunConfiguration setting were changed while the RunControl
was running, or to properly re-run with the original settings.
Unfortunately, the task was repetitive, as RunConfiguration
classes had no generic access to properties / "aspects"
and there was was the runConfiguration() accessor (probably
for mostly unrelated reasons in the output pane handling) which
made the idea of just casting that to the original runConfiguration
and access the data directly there appealing, with all the
expected consequences.
This patch here partially addresses the issue by copying some
more of the related data at RunControl construction time and
adjust the using code, avoiding most uses of the runConfiguration()
accessor in a mostly mechanical matter.
Complete removal appears possible, but will be less mechanical
in "difficult" plugins like ios, so this is left for later.
The new accessors in RunControl are very much ad-hoc, leaving
room for improvement, e.g. by consolidating the access to the
run config settings aspects with the other runconfig aspects
or similar. For now the goal is to remove the runConfiguration()
accessor, and to as much as possible fixed data after RunControl
setup is finished.
Next step would be to officially allow construction of RunControls
without a specific RunConfiguration by setting the necessary
data independently, removing the need for the various workarounds
that are currently used for the purpose of faking (parts of) the
effect of the non-existing RunConfiguration or refusing to operate
at all, even if it would be possible.
Change-Id: If8e5596da8422c70e90f97270389adbe6d0b46f2
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Using aspects is the standard pattern nowadays, there's nothing 'extra'
to them anymore.
Change-Id: I446f9d7b1db58a4899e5e44df33ce51f655e7be4
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
... into items that can be used generically in project configurations
(ProjectConfigurationAspect) and items that have a choice between
global and project settings (GlobalOrProjectAspect)
Change-Id: I94831237bdbb18c339eb76eba131bf7f928933d6
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The actual remaining use was to pop up a terminal in some
setups where Mode == Console, with a default of Gui meaning
"no console". In some downstream uses it was used set to
Console (probably to mean "this helper process does not need
a gui") but then luckily ignored when actually starting the
helper processes.
All cases where the console is useful and requested are
nowadays RunWorkers belonging to RunConfigurations with
a TerminalAspect, so they can directly get the relevant bit
from their RunConfiguration without having it part of
all StandardRunnables.
Change-Id: I1368d5968da5cf672656aebf200ccac8d45335d0
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
As all Runnables are known to be StandardRunnables, this here
essentially replaces all .is<StandardRunnable> by 'true'.
.as<StandardRunnable> by no-op, and fixes the fallout.
Change-Id: I1632f8e164fa0a9dff063df47a9e191fdf7bbb2e
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The values are not "unknown errors", but known to be exit codes of
the debuggee.
Change-Id: Icc5e99d463269f1f167ab7b49b78b92c2e4c6b65
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Instead of a blunt delete() RunControl::initiateFinish() is triggered
by the closing of the application output instead. The rampdown process
is basically the same as stop() now, except for the other success
signal (new finished()) and the final self-destruction of the
runcontrol.
stop() itself triggers initiateStop() on all running workers in
parallel (before it was in the order of start). This gives
downstream complex worker combinations the flexibility to use any
order it wants by ignoring stop() on 'uninteresting' workers,
and centralizing rampdown e.g. in the main worker. That setup should
be rare in practice, but seems needed in some profiler cases.
Change-Id: I986a152a663754206709ed4df0d4568847afad17
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
A RunControl is re-runnable if all its workers are,
a RunWorker is re-runnable if it's Stopped and unless it
says otherwise.
Also ensure SimpleTargetRunner only reportStop() once
per run and make process error message re-usable.
Change-Id: I73f5fb724d3026ceb81d5e32a3a71b4814b2bca9
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Remote CallGrind is still dysfunctional.
Change-Id: Ib9ab537dc068c94c7e61ac48b1a4b9d655ccb60f
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
It's only used internally as one-time communication between
worker and the *Tool singleton that handles toolbar button
states.
We basically start immediately after creation of the worker, so
any pre-start tool bar specific operations can be done at
RunWorker creation time.
Medium term, the runworker should proably steer "their" buttons
more directly.
Change-Id: Id6df703746ece5eebc23507739cd2a92ec55d11d
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
... instead of having one in each derived class.
Change-Id: Icd121ce46b1d161bd2d59eaeaad8363528dc3c23
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
... and QmlProfilerRunner::Configuaration by PE::UrlConnection,
and call it 'serverUrl' on the user side.
That's the only variant we ever had and avoids "translations"
between three structures that are essential the same.
Change-Id: I33386b2b8d2a7985ff934f6f8f840de0831bf9c1
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
This increases re-usability of activities like 'port gathering',
and makes their use less dependent on actual device implementations.
Change-Id: I017cb74874f2b38c487ba2d03906a675d5618647
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Forward all tool and target activities to run control, and initiate
further state transitions (only) from there. Also, make sure
tool/target's on finished() triggered on all finishing code paths.
After that, the base state handling is sufficient to handle remote linux
running and debugging.
Change-Id: I0150ef249c9ad0b7b8ac7192be6dc860c9ca8fc5
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Removes one reason to derive from base RunControls (specifically
ValgrindRunControl).
Change-Id: I81e32a49ef30e79ee7e7b53a54021eaaba43453a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
That's a good first approximation and often enough all that is needed.
Change-Id: If54cdb0e98cda94bc4a4ef24fcc12c78018c4dbe
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
The change is "conceptually wrong", the AnalyzerRunControl derived
classes' functionality should be provided by ToolRunners based classes
encapsulating/"being" the current Analyzer*Runner classes.
However, the AnalyzerRunControl is only three (empty even) virtual
functions, but a big obstacle in merging attempt due to a lot of
mechanical followup changes in downstream users.
The current construction mechanism of analyzer run controls is actually
two different mechanisms (locally direct RunControlFactories, and a
"generic" createAnalyzerRunControl wrapper for remote cases). The generic
createAnalyzerRunControl makes it difficult to migrated them one-by-one,
due to the various downstream users.
So instead of merging the per-analyzer two uses directly reduce
the "indirection" distance by removing the AnalyzerRunControl
intermediate layer. After that the createAnalyzerRunControl mechanism
can be dissolved by using normal RunControlFactories also for
the remote cases. After that, porting to ToolRunner, and combining
with ther local equivalent can be done one by one.
Change-Id: I0ddace33fcce210cf3a547ac5bb23b3d85013934
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This introduces a mini-state-"machine" to handle RunControl states
Intialized->[Starting->Running->Stopping->Stopped->]*->Finished.
Needing time between trying to start and getting feedback is nowadays
the normal setup for all remote targets as well as for most local tools.
Making that the default for all runs simplifies the code and provides an
opportunity to (a) fix some currently wrong reports of "stopped
immediately" and (b) to remove target-specific (WinRT) or tool-specific
(Valgrind, GammaRay) state members doing essentially the same.
Change-Id: I7f52fee41144188ee8389e922fdc265f8c0a6459
Reviewed-by: David Schulz <david.schulz@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Provide protected methods in RunControl to handle the notification
of when the RunControl starts and stops. Use these helpers to
move the isRunning() method into the RunConfiguration itself instead
of reimplementing it everywhere.
Change-Id: Ia8de42f7a6a14a049870d4e7fcb9af6756c2caa4
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Giving individual RunControls the freedom back to decide what they want,
even if they currrently decide to use the same one.
Change-Id: Ia2acf4b9d32d23c486339b2488611038672aba25
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
On the user-visible side, only the 'Analyze' mode button disappears,
and instead a combobox to switch between different tools in appears
in the Debug mode toolbar.
Internally, that's quite some re-organzition: The centralized
'Analyze mode is busy' flag is gone, allowing us to run e.g.
ClangStaticAnalyzer and MemCheck in parallel.
Analyzer tools and debugger now share the same mechanism to
generate/load/save dock widgets.
Analyzer tools now create and handle their own start/stop button
when appropriate. In general, Analyzer tools can create/handle more
than one run control at a time.
Further consolidation is possible, e.g. RunControl state handling
could be merged into the base ProjectExplorer::RunControl to
avoid the still existing duplication in ~15 instances.
Change-Id: I91e5940ebc4211f98056d507cf2f7b5f8efe7f07
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
This is the first mechanical step to execute on the 'shared pool of
debugger/analyzer views' idea.
Future steps would be providing infrastructure for the view pool,
making all analyzer/debugger views use the pool and then re-extract
a sensible base for a 'analyzer-and/or-debugger' tool plugin interface.
Change-Id: I1bb392e6dd3084fc56937956bee1d6fd9530335d
Reviewed-by: Eike Ziller <eike.ziller@theqtcompany.com>
Make isLocal() less intrusively used and correct. Use the stored device
more often, also handle errors more quickly.
Change-Id: I146d1f5788ea79d0a9d7b058c81908d451cf00d0
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
These re-implementations are conceptually "too specific". Rather let
the indiviual tools handle there expectations themselves.
Change-Id: I0bbea407b2241816a40d19eb1dbb0a7589cbda7b
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Instead, use the one in its (Standard)Runnable.
Change-Id: I14dbe91c50d083d11e18d514ec391875c64e3851
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Instead, use the one in its (Standard)Runnable.
The change is mechanical except to the fallback to the project directory
which was introduced in 8150209f to keep some compatibility with the previous
setup of the Android runner which created and copied the fallback value around
and ignored it in the end. Not producing the fallback value is less effort.
Change-Id: Ie04da570f0f9fbc1d048f2eacaed522f7253afa3
Reviewed-by: hjk <hjk@theqtcompany.com>
... with a lot potential to code consolidation.
Change-Id: I4d3a7fcc1cc6ae8763799f18cf9701695f387791
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Remove unneeded function arguments, Qt 5 connects etc.
Change-Id: I95faf80e7b5ccc574e2457b841f7913bc2aa05d3
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
