... in WatchHandler and DebuggerEngine interface.
Adjust using code.
Change-Id: I6371f3e96ba46a783e23a5767cdde24a10d3fce7
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Reviewed-by: hjk <hjk@theqtcompany.com>
The feature has been actually been disabled since commit ac771eb552,
but now it's time to also remove the dead code ...
Fixing the feature and bringing it out of the experimental state
would require quite some effort that apparently nobody is willing
to spend. So it's better to remove it.
The enablers in the qmldebug library, as well as the QmlJSDelta utility
class in qmljs library, are left in though.
Change-Id: Idf98a2f946d0db86bef2f20d2349d6ffedba219c
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
The only information ever used is whether it's c++ or not.
Change-Id: I4ca00663856dd66cbdf58c468f175a8c9e41d6a5
Reviewed-by: hjk <hjk@theqtcompany.com>
Only needed in the non-Python days. CDB didn't use it to start with.
Change-Id: Ia609218cc1a694f797e278c4d99ead68e6212938
Reviewed-by: hjk <hjk@theqtcompany.com>
The actual data is now in a TreeModel. As interface to
individual breakpoints there's a new Breakpoint class
essentially providing a checked handle.
On the user code side breakHandler()->foo(bpId) is
replaced by bp.foo().
Change-Id: I82f435bad6301fce85a1d82bf6bf39e9ddba511e
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
... and some of the related implementation details
Change-Id: I1f03aa5acf2d3fb2cfc2a6a7845f3d3578b0408d
Reviewed-by: David Schulz <david.schulz@digia.com>
Like this no one will get the idea that the socket state represents
the connection state and we can safely replace the underlying
implementation with something not derived from QAbstractSocket.
All the logging is retained but the connection creates the messages
now.
Change-Id: If84ff42f1fa9785254fbd49c75be867b9f663c83
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Done using the following ruby script:
Dir.glob('**/*.h').each { |file|
if File.file?(file)
s = File.read(file)
t = s.gsub(/^namespace .+ \{\n\s*class .*;\n\s*\}.*$/) { |m| m.gsub(/\n\s*/, ' ').gsub(/\s*\/\/.*$/, '') }
if t != s
puts file
File.open(file, 'w').write(t)
end
end
}
Change-Id: Iffcb966e90eb8e1a625eccd5dd0b94f000ae368e
Reviewed-by: hjk <hjk121@nokiamail.com>
A lot of our build system files specify unneeded include
paths. These roughly fall into the following categories:
a) Paths that are already set in more general files
such as qtcreator.pri.
b) Paths that serve no purpose at all, possibly
left over from earlier versions of the project.
c) Paths that act as workarounds for wrong include
statements of the form '#include "xyz.h"', where
xyz.h is not in the same directory as the including
file.
This patch removes such path specifications and fixes the offending
include statements from case c).
Tested on Linux, Windows and OSX with qmake and qbs.
Change-Id: I039a8449f8a65df0d616b4c08081145c18ae4b15
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
And where using editors is necessary, take *all* editors into account,
not a random set of what previously was called "original" editors (when
using splits).
Change-Id: Id6bbad08f3083b6744fc2edcf0b87ba504d3257b
Reviewed-by: hjk <hjk121@nokiamail.com>
Update context from QML object tree or the stack frame
depending upon debugger engine state.
Change-Id: I4e6affba37acc016513ad95cd278a400aaa18c49
Reviewed-by: Christiaan Janssen <christiaan.janssen@digia.com>
When an object is selected in the Inspector, the
Editor is updated to show the relevant code.
Task-number: QTCREATORBUG-8246
Change-Id: I4f7fbcccdeb22849682fa72c63e87a78f48d185b
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Christiaan Janssen <christiaan.janssen@digia.com>
The current selected item in the inspector view
is set as the context of the console.
Task-number: QTCREATORBUG-7439
Change-Id: Ibc980218751ce4afacf714cf1ab34f0a36550b2c
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Listen to gdb/MI notifications when possible. This is more
granular, gives access to the thread group id and takes
care of thread changes at any time.
Change-Id: I8c67f6f19b204059deefdf7e07fe3b4ce13ed963
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The console is now a part of qmljstools plugin. The console
appears as an output pane. A dummy QScriptEngine evaluates
expressions when a declarative debug session is not in
progress. During a debug session, the expressions are
evaluated by the debug services.
Task-Number: QTCREATORBUG-7402
Change-Id: Ic2eeac44fb335c706be03b89f8672b0356efe984
Reviewed-by: Christiaan Janssen <christiaan.janssen@digia.com>
Reviewed-by: hjk <qthjk@ovi.com>
In the case of remote setup, the application output
may take a while. The timeout is increased to 60s.
Additionally in the case of mixed debugging, we check
the state of the master engine to determine if we should
keep waiting for the application output.
Change-Id: I237a3501c1e70dbe62870929e50f12ede80e7c56
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@nokia.com>
Reviewed-by: Christian Kandeler <christian.kandeler@nokia.com>
Move Status enum out of QmlDebugClient and drop "QmlDebug"
prefix for the different 'Reference' structs. Allows to
avoid 'using namespace in QmlDebug' in header files.
Change-Id: Id9857977300e86d637cf128ff3417d8b24c8e995
Reviewed-by: Aurindam Jana <aurindam.jana@nokia.com>
Merge QmlJSInspector plugin into the debugger. Also merge the
extra Inspector window with the Locals & Watchers: It now shows
the QML object tree in the running state.
Change-Id: I59ae0c1b970a48ba10ecda92ed3ba765d94b1d9c
Reviewed-by: Aurindam Jana <aurindam.jana@nokia.com>
Rename the QmlJSDebugClient lib to QmlDebug (shorter names, easier differentiation with the shared/qmljsdebug lib).
Also rename
- QDeclarativeDebug* classes to QmlDebug*
- QDeclarativeOutputParser class to QmlOutputParser
To clarify the features,
- Debugger::QmlDebuggerClient is now Debugger::BaseQmlDebuggerClient
- QmlEngineDebugClient is now BaseEngineDebugClient
- QmlDebuggerClient is now QmlEngineDebugClient
- QDeclarativeEngineDebugClient is now DeclarativeEngineDebugClient
Change-Id: Ie15713730a614c8ab4b637fad0924f95b54e633f
Reviewed-by: Aurindam Jana <aurindam.jana@nokia.com>
