... into items that can be used generically in project configurations
(ProjectConfigurationAspect) and items that have a choice between
global and project settings (GlobalOrProjectAspect)
Change-Id: I94831237bdbb18c339eb76eba131bf7f928933d6
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The previously per-Project/RunConfiguration changing meanings of
BuildTargetInfo::buildTarget have by now been split
into separate values in BuildTargetInfo:
- buildKey a handle to one item in Target::applicationTargetList
- displayName a user-visible string in the run settings page
The buildKey was tweaked to coincide with the previous 'extraId',
i.e. the non-RunConfiguration-type part of the project configuration
id that (still) use id mangling.
This allows replacing the cases of locally stored seven different
versions of buildKey(-ish) data by one RunConfiguration::m_buildKey,
and do all remaining extraId handling in RC::{from,to}Map only,
i.e. remove the base ProjectConfiguration::extraId() virtual and
remove the "re-try fromMap with mangled id" hack entirely.
The id mangling is still used to temporarily maintain .user file
compatibility in some cases for now, but should be replaced by
storing the build key and the RunConfiguration type soon. Qbs
already changes in here to only use the uniqueProductName as
buildKey, without the previously added display name which is
stored as part of the ProjectConfiguration already.
It turns out that RunConfiguration::buildSystemTarget was intended
and used to retrieve an item from the Target::applicationTargetList
for some configurations, coinciding with what buildKey does always.
So use that insteand and drop RunConfiguration::buildSystemTarget.
There is clearly is further consolidation potential left.
handling of (default)displayNames is still a per-runconfiguration
mess and there is further consolidation potential left.
Change-Id: I448ed30f1b562fb91b970e328a42fa5f6fb2e43e
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This follow the rough pattern of recent *RunConfigurationFactory changes
for build and deploy configurations.
- Collapse the two lines of constructors similar to what
890c1906e6 did for RunConfigurations
* Deploy* was purely mechanical
* Build* ctors are split in connects() in the ctor body
to create "empty shell for clone" etc
and build step additions in initialize() functions which
are only used in the create() case.
-- Allows to collapse the shared 'ctor()' functions, too.
- Move FooBuildConfigurationFactory::create() implementations
to FooBuildConfiguration() constructor. That was a strange
and unneeded ping-pong between factories and objects, and
furthermore allows one level less of indirection (and for a
later, left out here, some reduction of the
FooBuildConfiguration interfaces that were only used to
accommodate the *Factory::create() functions.
- Most {Build,Deploy}Configuration{,Factory} classes had a canHandle(),
but there wasn't one in the base classses. Have one there.
- Most canHandle() functions were checking simple restrictions on
e.g. project or target types, specify those by setters in the
constructors instead and check them in the base canHandle()
- clone() is generally replaced by a creation of a "shell object"
and a fromMap(source->toMap()), implemented in the base, there
are two cases left for Android and Qbs that needed(?) some extra
polish
- generally use canHandle() in base implementation, instead
of doing that in all Derived::canFoo()
- as a result, canCreate/create/canClone/clone reimplementations
are not needed anymore, keep the base implementation for
now (could be inlined into their only users later), but
de-virtualize them.
- Combine Ios{Preset,DSym}BuildStepFactory. There was only one
'dsym' build step they could create.
- Split the 'mangled' id into the ProjectConfiguration subtype
specific constant identifier, and a QString extraId() bit.
Only maintain the mangled id in saved settings.
- Make ProjectConfiguration::m_id a constant member, adapt
all constructors of derived classe.
Not done in this patch:
- Finish possible cosmetic changes on top
- Add a way to specify restrictions to supported Qt versions
(used in Android/Ios), as the base implementation does not
depend on the qtsupport plugin
- Combine the QList<X> availableFoo() + createFoo(X) function
pairs to somthing like a direct
QList<struct { X; std::function<X()>; }> fooCreators()
to avoid e.g. the baseId.withSuffix() <-> id.suffixAfter(base)
pingpong
- Remove the *Factories from the global object pool
- Do something about priority(). Falling back to plain
qmake in android+qmake setup is not helpful.
Change-Id: I2be7d88d554c5aa8b7db8edf5b93278e1ae0112a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The idea is to massage the setup in a way to make implementation
of new configurations less error prone by identifying recurring patterns
and sharing repetitive code that tends to be forgotten (see Android cloning).
The former two lines of constructors (owner-and-id, owner-and-source)
are split into a simple, shared, constructor and new setId() and
copyFrom() functions.
The change is mostly mechanical, some multiple calls to fromMap
have been removed, though, some consts added.
Otherwise, to keep the patch small it temporarily introduces two
helper templates in IRunConfigurationFactory. Also, setId() signatures
have not been unified yet. These won't be needed in the final setup.
Change-Id: I8c0734496caae744a9883fe6d92c1d8f8e0234ea
Reviewed-by: hjk <hjk@qt.io>
... and use this as a base for all RunConfigurations.
Clean out code in the individual run configurations dealing with their
enabled/disabled state.
Change-Id: Icc2ea136b056f7aea7ce96480b4402459d7ac0ce
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Enable support for tooltips in MiniProjectTargetSelector. Use it to display
the kit information when hovering the Kit selection area.
Change-Id: Ie9691973cb74e25217635dc0a798dd9c6219ad37
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Currently we pass in some places by value, elsewhere by const ref and
for some weird reason also by const value in a lot of places. The latter
is particularly annoying, as it is also used in interfaces and therefore
forces all implementors to do the same, since leaving the "const" off is
causing compiler warnings with MSVC.
Change-Id: I65b87dc3cce0986b8a55ff6119cb752361027803
Reviewed-by: hjk <hjk121@nokiamail.com>
This was mostly used to disambiguate the char * and the QString
constructors.
Change-Id: Ib6923ef8e8c0e5d514a883e73aa001a1cd9fb534
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
#!/usr/bin/env ruby
Dir.glob('**/*.cpp') { |file|
# skip ast (excluding paste, astpath, and canv'ast'imer)
next if file =~ /ast[^eip]|keywords\.|qualifiers|preprocessor|names.cpp/i
s = File.read(file)
next if s.include?('qlalr')
orig = s.dup
s.gsub!(/\n *if [^\n]*{\n[^\n]*\n\s+}(\s+else if [^\n]* {\n[^\n]*\n\s+})*(\s+else {\n[^\n]*\n\s+})?\n/m) { |m|
res = $&
if res =~ /^\s*(\/\/|[A-Z_]{3,})/ # C++ comment or macro (Q_UNUSED, SDEBUG), do not touch braces
res
else
res.gsub!('} else', 'else')
res.gsub!(/\n +} *\n/m, "\n")
res.gsub(/ *{$/, '')
end
}
s.gsub!(/ *$/, '')
File.open(file, 'wb').write(s) if s != orig
}
Change-Id: I3b30ee60df0986f66c02132c65fc38a3fbb6bbdc
Reviewed-by: hjk <qthjk@ovi.com>
Distinguish from const char * one.
QString ctor is yet to be removed
Change-Id: I2da231036c6417353b0566d39666d918ad141c6d
Reviewed-by: hjk <qthjk@ovi.com>
Introduce Profiles to store sets of values that describe a system/device.
These profiles are held by a target, getting rid of much of the information
stored in the Build-/Run-/DeployConfigurations, greatly simplifying those.
This is a squash of the wip/profile branch which has been on gerrit for a
while, rebased to current master.
Change-Id: I25956c8dd4d1962b2134bfaa8a8076ae3909460f
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Use Core::Id for all the project related objects in favor of plain
QStrings.
Change-Id: I790ab40cb29899efdb49c413a77609486f52e683
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
* Enable support for this in all ProjectConfiguration items
(Targets, projects, BCs, DCs, RCs, etc.). This is nicer
than having custom code in individual configuraiton items.
Reviewed-by: dt
* Add a DeployConfiguration class to hold settings related
to deployment.
* Add BuildStepsList to hold a list of buildsteps
* Update BuildConfiguration to use BuildStepLists instead of
manageing lists of buildsteps itself.
* Update BuildManager to use BuildStepLists in its interfaces
* Fix fallout introduced by API changes
* Update .user file to new way of storing settings
Task-number: QTCREATORBUG-1427
Task-number: QTCREATORBUG-1428
Task-number: QTCREATORBUG-1811
Task-number: QTCREATORBUG-1930
