... and use this as a base for all RunConfigurations.
Clean out code in the individual run configurations dealing with their
enabled/disabled state.
Change-Id: Icc2ea136b056f7aea7ce96480b4402459d7ac0ce
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Show which projects are currently parsing in the project tree.
Change-Id: Ie69907a73ec7c3cf2ef40c37db620a0144178f95
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Get rid of duplicated code to do such signaling in derived Project types.
Change-Id: I26914a1d751d72ee65c15a7943e0e7f34978f042
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Unify the handling of displayName with a proper changed signal across
all projects.
Change-Id: I7e503528854b85f6f38de4b0943775f82a0d6123
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Handle the generation of the list of files in a project globally, based
on the project tree.
Creator now has the concept of TreeManagers which can enrich the project
tree with additional data (e.g. the files found in a resource file), which
the project does not necessarily know about. So use that tree to find
the files that belong to a project instead of implementing similar features
in each project.
Change-Id: Ia375a914a1f2c0adaa427f9eda834eec2db07f68
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Marco Benelli <marco.benelli@qt.io>
Can be done generically when creating projects. The only wart is
the use from BaseQmakeProjectWizardDialog::writeUserFile.
Change-Id: Ie98c9f88ec142e82443e204a0075e3ae9e163752
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
${AnyProject}::updateCppCodeModel() did two potentially not that cheap
operations in the ui thread:
(1) Querying the MimeDatabase for the mime type for the source files of
the project. In 99.9% of the cases no files need to be read for
this as the file extension will resolve the type. The expensiveness
comes from the sheer number of files that can occur.
(2) Calling compilers with the "(sub)project's compiler command line"
to determine the macros. While the caches avoid redundant calls,
the number of the unique compiler calls makes this still a
ui-freezing experience.
These two operations are moved into a worker thread. For this, the
expensive compiler calls are encapsulated in thread safe lambdas
("runners") in order to keep the "mutexed" data minimal. The original
API calls of the toolchains are implemented in terms of the runners.
While adapting the project managers, remove also the calls to
setProjectLanguage(). These are redundant because all of the project
managers already set a proper value in the constructor. Also, currently
there is no need (client) to report back detection of C sources in
project parts. This also keeps CppProjectUpdater simple.
There is still room for improvement:
* Run the compiler calls in parallel instead of sequence.
* Ensure that the mime type for a file is determined exactly once.
Change-Id: I2efc4e132ee88e3c8f264012ec8fafe3d86c404f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This makes sure they need to copy whatever they need.
Change-Id: I767ac0c5f54ca1f9f46acdefe4bd7fea35657312
Reviewed-by: Alexander Drozdov <adrozdoff@gmail.com>
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Project source tree is a same for all build configurations so it is
a good idea to keep it persistent between CMake runs, configurations
switches and so on. It safes a lot of time for big projects.
Move more operations to the scanner thread:
- Nodes filtering: skip .user files on top level of the project, skip
well-known extensions and octet-streams: In most cases these are not
required to be shown in the project tree.
- Nodes sorting
Fix small memory leak: we have .user in the scanner result. After this
node filtered out, but is not feed (old code at the
BuildDirManager::generateProjectTree()). Now .user file skips during scan
without memory allocation at all.
Allow user manually rescan project tree by call Build -> Rescan project
tree. It runs CMake and Tree Scanner together: in most cases only CMake
run requires but time to time (VCS update) full rescan also required.
Change-Id: I4a6e6c897202da557509291c79932dd7751860e5
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This triggers the fallback mechanism which will make sure the CMakeLists.txt
file will be displayed.
This used to fail since one empty folder was left over in the project.
Task-number: QTCREATORBUG-17383
Change-Id: I867fd9039bc5df805ff5174ec49084bbcf688824
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Continue to concentrate all the code reading random cmake files in
BuildDirManager. Now the task is to clean up the code, make it less
dependent on values it should not depend on (kits, etc.), make it
handle changes better and finally add another implementation that
uses the cmake server mode to extract the data.
Change-Id: I533625e376b969b64287bc205bd2e4be7a605306
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
This is in preparation for having support for cmake's server
mode.
Change-Id: I6cc04fe7c5132c491c3f3c0f46560b8ad88808e8
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Add helper code to FolderNode that enables the creation of a tree
of File- and FolderNodes from a FolderNode and a list of FileNodes.
Change-Id: Iba4b6a768fc3d0501851f141372e7e34913ba518
Reviewed-by: hjk <hjk@qt.io>
Some polish for the CMakeProject. Remove unnecessary includes, etc.
Change-Id: I3a73aac79b2177adc613f31865074f778ef21360
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
There is UtilityType now, so use that if there is no executable being
generated.
Change-Id: I9e8d512077b8352ec056b49c8db03644482b8fbc
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Rip out QFileSystemWatcher and use Qt Creators IDocument for file
watching instead. The latter properly delays any action till creator
gets focus again.
Task-number: QTCREATORBUG-16354
Change-Id: Ibb71963416b09712a80ee95347425550453b7fd4
Reviewed-by: Tim Jenssen <tim.jenssen@theqtcompany.com>
With this patch it is possible to specify QML_IMPORT_PATH in
CMake projects and QtCreator will scan those paths.
One only has to make sure that the variable which is set in the
CMakeLists.txt is also added to the CMakeCache.txt
Task-number: QTCREATORBUG-11328
Change-Id: I11c7694806664d3203d855983e7db4a89fac267d
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@theqtcompany.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
CMake does not know whether a build target was configured out of the
current build or removed entirely, so implement the relevant marker.
Mark all of the "vanished" RunConfigurations as disabled.
Also remove one unnecessary level of indirection when setting up
RunConfigurations.
Change-Id: I30a21581823b4bff5a5be29480e64423b9379983
Task-number: QTCREATORBUG-15950
Reviewed-by: Tim Jenssen <tim.jenssen@theqtcompany.com>
Allow for different extra compilers which may get called to generate
additional code for the code model. The build system is expected to
know what files are generated from which source file and the extra
compilers know how to generate the content of those files, without
touching the build directory. the uic adapter is refactored to be
the first such extra compiler.
The extra compiler is run when an editor for its source document
loses focus, or after a timeout of 1s when the source document has
been changed.
Change-Id: I13c110c61120c812f02639a3684144daf8979b37
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>
Scan through the build.ninja file once for all targets instead once
for each target. This improves CMake project loading speed for
projects with many targets and a large build.ninja considerably.
Change-Id: I857c48a714dbb39a469f81c1f951a77f2f57578e
Reviewed-by: James Legg <jlegg@feralinteractive.com>
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>
Do not push the cmake running straight into the face of the user. Do it
in the background instead.
This needs some follow-up patches to become really useful.
Change-Id: I3457178b33e3f14bdeac25005a773d17abb73b65
Reviewed-by: Tim Jenssen <tim.jenssen@theqtcompany.com>
Add setRootProjectNode method and a default implementation of
rootProjectNode to Project. Use that in all derived classes.
Change-Id: Id28cde04457a20a8963d43020785ef9d77fea57c
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>
Implement default projectManager method in Project and use
these two everywhere.
Change-Id: I27e011e6fdc17b36aff1b8b931527307320e347c
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
Add setDocument method, implement document method, use this in all
projects.
Change-Id: I5018bf7c2739665c13eee340184ce7c41fd319bb
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
* Shorten header guards
* Use override and auto where possible
* Remove useless destructors, etc.
* Remove private slots sections, unify private: sections
* Use member initialization where it makes sense
Change-Id: I00eaf6d706adc16859176d1b68c631d3336bb39f
Reviewed-by: Tim Jenssen <tim.jenssen@theqtcompany.com>
Store project name in root node and remove the member variable
that was used for this purpose from the CMakeProject.
Makes sure the same name is used more consistently.
Change-Id: I2b60a15143934bdeffe6c744fd300be7e81c674e
Reviewed-by: Niels Weber <niels.weber@theqtcompany.com>
Some time ago the all the wizards for the Plain C++ were coalesced into one wizard.
Since then the wizard asks first for the targets via a targetsetuppage and then
in the CMakeOpenProjectWizard asked for the kit again.
This patch clean thats up, by always using the TargetSetupPage for kit
selection and removing code from the CMakeOpenProjectWizard for kit selection.
It also adds more types of buildconfigurations
Offer: Debug, Release, ReleaseWithDebugInfo, MinSizeRelease with the
corresponding -DCMAKE_BUILD_TYPE parameters. That argument is saved
in the build configuration and used once for the first cmake run. (Subsequent
runs of cmake don't require passing that to cmake again.)
Also do not require running cmake on creating the buildconfiguraiton, instead
postpone that until the buildconfiguration is made active. With the current
cmake wizard, selecting multiple kits would show a dialog per buildconfiguration.
Change-Id: I3bb806113f4f529f8e291830647d2515a6c4df8a
Task-number: QTCREATORBUG-12219
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>
The first getCmakeCXXFlags that reads the build.ninja file
stores the contents in the inout parameter cachedBuildNinja.
Further calls to getCMakeCXXFlags just use this cached value.
This prevents excessive locking of this file while constructing
the code model information.
Change-Id: I81e1431194bed6913c69abb2d954068c999a5c1b
Task-number: QTCREATORBUG-14639
Reviewed-by: Tom Tanner
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>
Instead of just a bool, return a tristate of: Ok, Error and UserAbort.
Also add a out parameter errorMessgge.
Change-Id: Icb076de49998e9372839d0631c2776e905e4a0f6
Task-number: QTCREATORBUG-13223
Reviewed-by: Tobias Hunger <tobias.hunger@theqtcompany.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
